In this channel we show how to test and measure electric and electronic things using digital multimeters to solve problems in very easy way, subscribe today here, Thank you.
That is great for checking an armature windings. But it might overheat with a load on it or the bearings could be bad or the armature shaft could be bent.
@RaqeTube10 күн бұрын
Thank you 👏
@milosmilos128311 күн бұрын
And indirect button?
@MrClassiccarenthusia11 күн бұрын
To be fair, I was expecting something more. During the Wandel capacitor plague of the early 2000s, I saw capacitors with their guts blown out pass this test, and even rack up the resistance all the way to the end of the scale. I don't think this is a valid test. All you're showing is that it isn't shorted out.
@NisanamJames16 күн бұрын
Please I have multimeter by I don't have 20k my own get 600k and 60k 6k so don't know how to use please
@noufalnowfi348220 күн бұрын
Hallo iam from india kerala👍
@orlando433122 күн бұрын
the capacitor is open
@SharifAthman22 күн бұрын
How are you sosana,if you checked life of capacitor without checked charge on capacitor for touching two terminals together what happened?
@pete-mz9vr24 күн бұрын
Thank you! Very helpful 👌
@clairesnewgardenadventures24 күн бұрын
Great video, nasty fingernails! Gross!
@madcapZ25 күн бұрын
Thanks so much
@justinberry399127 күн бұрын
I'm not gonna do this
@justinberry399127 күн бұрын
Pete and Repeat
@ME-gm3wv28 күн бұрын
Didnt even test it under load. Not how to test a battery relying on only voltage readout.
@timredd2097Ай бұрын
Show one in bad condition as well
@SamuelMillsjrАй бұрын
English
@pamelalintz5724Ай бұрын
Do not touch one wire to your thigh & the other to your winky. Or you will get a tinkle from your winky.
@pamelalintz5724Ай бұрын
Thanks, simple & effective
@mdnaz2845Ай бұрын
no reading mean good?
@chantrapen1901Ай бұрын
Thanks
@davidreynolds4684Ай бұрын
The caps found in the flash circuit of disposable cameras are small but have a good punch to them. Ive accidentally rigged them up inside of the handle of my mag lights connecting to the main power button. Remove the rubber and secure the lead to the plastic part of the switch with a tiny screw or glue. When the button is pushed to turn the light on it waill shock the hell out of who ever pushed it. They are fun to install inside your remotes too.
@davidreynolds4684Ай бұрын
You can buy a 20,000 ohm resister to safely discharge caps. And it wont l damage the cap. For those who dont know what youre doing or what a cap does. Once a cap is charged it can hold that charge indefinitely. If you grab it and touch the terminals or wires best case scenario youll get a tingle. Depending on the voltage and mf youll be lucky if you only piss yourself.
@aliralgrad3825Ай бұрын
Ou trouver la pièce ? Merci
@NickoTPАй бұрын
Thank you ❤
@KGisthenamemanАй бұрын
Man this was unbearable bro. Very, 5 to get to the point and for something so very, very simple.
@ZEN43DАй бұрын
thank you
@nickloss2377Ай бұрын
ooooh.. I finally understand! you don't have any clue what you're doing.
@cv9722 ай бұрын
Touch one to your lengua other to youe ojito!!!
@sylviagm2 ай бұрын
Gracias!
@peteashby77162 ай бұрын
"Mul - T - Meet - her", hope that helps you. 👍
@saljudwiputra2 ай бұрын
But we don't know what the uF value is in the capacitor itself.
@kashyap19912 ай бұрын
what if it’s a rechargeable battery does the voltage changes when the battery charge is low or charge is high
@devineentertainment34942 ай бұрын
this is very f*ck all video, bad and slow useless explanation
@leahrodriquez13492 ай бұрын
If I have the battery disconnected so no power to power wheel but I have unscrewed motor from gear box can I still do this test even with the wires still connected to motor tabs as long as no power going to it.
@edgardolim99532 ай бұрын
You are not a electronics technician.
@BurRun-kt3tf3 ай бұрын
Thankអរគុណ❤
@vladimpaler23dearo293 ай бұрын
you did other video with the same method but different multimeter
@alfredmagdaleno24188 күн бұрын
Cool Name !!
@bashiruosman4733 ай бұрын
Excellent ❤❤❤
@bashiruosman4733 ай бұрын
Excellent ❤❤❤
@kashyap19913 ай бұрын
If you recharge this cells again they are good to go ?
@blazeroberson63843 ай бұрын
Ummm yeah that's definitely a bad capacitor. It should be at least showing 3.5uf for a 4uf capacitor.
@wasajjajackson79373 ай бұрын
Volume is too low. But thanks bro
@7elmAl7ayah3 ай бұрын
Thank you sir, i have a lot of batteries needs to check before i rid of it, so i have same this multimeter model DT9205A.
Пікірлер
I got 1.49v. Do I need to change it?
Thanks!
Missing test for AMPERE.
Thanks!
Don't do this. there are numerous safer ways
That is great for checking an armature windings. But it might overheat with a load on it or the bearings could be bad or the armature shaft could be bent.
Thank you 👏
And indirect button?
To be fair, I was expecting something more. During the Wandel capacitor plague of the early 2000s, I saw capacitors with their guts blown out pass this test, and even rack up the resistance all the way to the end of the scale. I don't think this is a valid test. All you're showing is that it isn't shorted out.
Please I have multimeter by I don't have 20k my own get 600k and 60k 6k so don't know how to use please
Hallo iam from india kerala👍
the capacitor is open
How are you sosana,if you checked life of capacitor without checked charge on capacitor for touching two terminals together what happened?
Thank you! Very helpful 👌
Great video, nasty fingernails! Gross!
Thanks so much
I'm not gonna do this
Pete and Repeat
Didnt even test it under load. Not how to test a battery relying on only voltage readout.
Show one in bad condition as well
English
Do not touch one wire to your thigh & the other to your winky. Or you will get a tinkle from your winky.
Thanks, simple & effective
no reading mean good?
Thanks
The caps found in the flash circuit of disposable cameras are small but have a good punch to them. Ive accidentally rigged them up inside of the handle of my mag lights connecting to the main power button. Remove the rubber and secure the lead to the plastic part of the switch with a tiny screw or glue. When the button is pushed to turn the light on it waill shock the hell out of who ever pushed it. They are fun to install inside your remotes too.
You can buy a 20,000 ohm resister to safely discharge caps. And it wont l damage the cap. For those who dont know what youre doing or what a cap does. Once a cap is charged it can hold that charge indefinitely. If you grab it and touch the terminals or wires best case scenario youll get a tingle. Depending on the voltage and mf youll be lucky if you only piss yourself.
Ou trouver la pièce ? Merci
Thank you ❤
Man this was unbearable bro. Very, 5 to get to the point and for something so very, very simple.
thank you
ooooh.. I finally understand! you don't have any clue what you're doing.
Touch one to your lengua other to youe ojito!!!
Gracias!
"Mul - T - Meet - her", hope that helps you. 👍
But we don't know what the uF value is in the capacitor itself.
what if it’s a rechargeable battery does the voltage changes when the battery charge is low or charge is high
this is very f*ck all video, bad and slow useless explanation
If I have the battery disconnected so no power to power wheel but I have unscrewed motor from gear box can I still do this test even with the wires still connected to motor tabs as long as no power going to it.
You are not a electronics technician.
Thankអរគុណ❤
you did other video with the same method but different multimeter
Cool Name !!
Excellent ❤❤❤
Excellent ❤❤❤
If you recharge this cells again they are good to go ?
Ummm yeah that's definitely a bad capacitor. It should be at least showing 3.5uf for a 4uf capacitor.
Volume is too low. But thanks bro
Thank you sir, i have a lot of batteries needs to check before i rid of it, so i have same this multimeter model DT9205A.
pero por que...tchow mi
❤❤