Don't know where your at but plugs here are 20 each
@maineboy24832 күн бұрын
Dude did you seriously not realize that the video is upside-down 🙄🤷🤦
@ColoradoCamperman3 күн бұрын
Thank you! I tried a Philips head but it didn't work. Got the broken zerk with a T15 torx bit. Much appreciated!
@jasonking86714 күн бұрын
Hey, i stumbled across your video here. Im about to install thses exact shocks on my 2014 f150, how are they holding up so far after 4 years?
@JUCARL236 күн бұрын
Drop in bed liners are not preaty for preaty trucks, and they don't have self cleaning system. lol. But they are life saver for those rough trucks caring concrete, rocks, planters, lawn mowers, dirt bikes etc
@off-roadingexplained84177 күн бұрын
Are the Gabriel shocks a little longer?
@Syklohh7 күн бұрын
How do you get the spring compression and the bolt that goes through the spring to thread ? Do you do that with the handle in or out on a table if you know what I’m saying?
@Syklohh7 күн бұрын
Please get back to me if you would !!!!!
@santeebandit32467 күн бұрын
That was so concise and on point man.. literally that simple. Thank you, thank you, thank you!!!
@rts361312 күн бұрын
If I'm doing brakes, I'm go over everything like lubing pins, changing the brake fluid and bleeding the system. If I'm just doing pads, I try to deglaze the rotors with a flap wheel on a grinder. I've even taken out grooves (shade tree turning) with the grinder, the trick for both is to spin the rotors while you hit it with the flap wheel. It's getting harder to find anyone to machine turn a rotor or drum these days with all the cheap overseas replacement parts.
@DeathStrikeVirus13 күн бұрын
Mine is a 2000 Flex that I've only done the Intake gaskets and timing chain on, and the chain was still fine at 230k miles. Ford made this motor to LAST. Not as good gas mileage as the 2.3/2.5 or power as the 4.0. But it really was a beast of an engine.
@5.43v13 күн бұрын
No link in description
@Ruger-1315 күн бұрын
does any body know were I can get a 1997 Polaris trail boss 250 seat Saddle?
@squirlgirl-bronc17 күн бұрын
Thank you so much for posting this!!!! I was just about to give up and go buy another one and your process worked and the sprayer is spraying. THANK YOU!!!!
@RonnieGibbons-li4ip18 күн бұрын
Hey mines doing the same thing and will go to start it and battery will even be dead
@MegaA10warthog18 күн бұрын
Nice job! Not cringe at all. This will help me do mine..very thorough. Thanks
@chrisstokley768718 күн бұрын
i got 2x rangers . both 94.. 1 is 3.0.. the other is 4.0... the 4.0 is built way better ! easier work on .. both got heads re done.. i know!!!! lol.. YES : i KNOW WHAT happened !!!! 2 things will do this ..#1- water to clean valves trick .. but done it too long and motor was HOT! ....#2 - best gas + 2 bottles of octane booster = engine made for 87 ... got 93 + octane booster :>).. also .. i havent seen /but suspect 93 + a TURBO.. stressed it out! ..Rebuild and use lightweight race pistons + rods + oversized valves on exhaust for power + gas mileage.. :>) ..be happy /proud man.
@vaughncanter751320 күн бұрын
whats with the hat on backwards ,i guess it is cool right ?
@kblopp23 күн бұрын
Whats up with that loud ass music ??
@carl1676024 күн бұрын
the more weight you put on those shocks the better they ride/work. adding air bags just hampers the shock action and they will bounce the truck like shit. You want a nice ride then add a comfort leaf (3rd leaf) with those shocks.
@milesfifer17129 күн бұрын
Did the seal come out on its own when you pulled the axle out?
@dingbatnomad8235Ай бұрын
I think my eco runs better w/o the air-dam installed, but thats just me
@jeremyrude6883Ай бұрын
I just installed them on my 2022 Denali 1500. Absolutely way better then factory already
@coreydouglas240Ай бұрын
Have you had a n issue with the controller saying no trailer when hooked up? I am but for some reason have light.
@gawddangthatsmoist2251Ай бұрын
120k and you've virtually replaced the whole front suspension like 3 times? WTF are doing with this truck lol
@CR8VEАй бұрын
Bro how did you pull your motor with your torque converter that's supposed to be attached to flex plate attached to your bell housing out that happen man lol
@SexyTexasАй бұрын
What year truck?
@survivor030406Ай бұрын
What if I cannot find original 2nd key and only have an original 1st key?
@theprinceofsnjАй бұрын
A fond memory. I had a 97 Ranger the same green. Had the same issue, once. I'd still have it, But I lost it when it got t-boned by a kid driving a 20 year old Buick I now have a 2019 Ranger
@donaldsmithjr2917Ай бұрын
i would of welded the hitch receiver right to the atv would'nt of needed the bolt anymore and it would'nt of move anymore
@redsox999Ай бұрын
What is the size of your window?
@clamojoat8543Ай бұрын
I replaced the rear pads on my moms highlander and it seams that she blew through them in under 10k miles, sounds like its metal on metal now. fronts are also bad, not sure what brand the previous owner used, but the rear are napa brand ceramic. gona try these. case 10k is nuts for ceramic IF they actually are that.
@mendez_guzman9661Ай бұрын
How full was you fuel tank?
@brendan2599Ай бұрын
You put them in the right side up. The bottle should go down, because the seals will always leak a little. It the bottle goes up the will slowly lose their oil over time. Just put some on my Frontier. Much stiffer, but they're making up for the 24 year old leafs.
@evieevdw5033Ай бұрын
Thank you I have a newer ford and this worked perfectly, luckily it just came loose so I didn’t need to use the proxy 🙏🙏
@strokerstang1Ай бұрын
Hey Mitch, my brake controller harness and plug was actually plugged into a dummy spot on the back of the little cubby box. I was expecting to fish for it and didnt have to. That was the easiest install I've ever done.
@kirkdarling4120Ай бұрын
I had a 2010 Chrysler Town and Country that notoriously had the too-small 16-inch wheels. Those were too small for the weight of the vehicle, and typically any kind of break pads wore out within 10-20,000 miles....plus incredible dust, screeching, and grabbing. The Powerstop Extreme Z36 rotors and pads on the front solved those problems.
@luisalulu7650Ай бұрын
Thank you worked like a charm 😊
@jefflee4225Ай бұрын
Loves to hear himself talk way too much.
@romellojames6690Ай бұрын
Music is fire
@romellojames6690Ай бұрын
💪💪
@MarkK01Ай бұрын
You wore out a set of Power Stop Extreme brakes in 50,000 miles? You are very hard on brakes. Those pads should have lasted a lot longer. You must be a very aggressive driver. You may need to change up your bad driving habits. I am not a judgmental person, I am just commenting on what you said. If that was my vehicle I would be asking myself how is my driving habits causing premature brake wear out so fast. I have a 2016 Ford Escape Titanium 2.0 ecoboost with 150,000km (94,000 miles) and I am still running the original brakes. I am getting ready to install the Power Stop K6478 Z23 Evolution Sport Brake Upgrade Kit on all 4 corners of my SUV. The original brakes still work good with some brake pad material on them but I am not that kind of person. Once I feel my brakes need to be changed I change them. You can not put a dollar amount on your wife and kids lives.
@TroyMockАй бұрын
Do you have the part number for the bolts? I'm having a hard time finding them
@jbrooks8885Ай бұрын
What about the new rear shocks Ole boy, did it still ride good when empty going down the road or harsh ride? Like the content!! Nice flatbed build too!
@HitchinMitch23 күн бұрын
Still rode smooth as a 24 yr old truck could. I think this bed is about the same weight maybe a little heavier then the old bed, tailgate and bumper was so it out some compression on the coils to smooth it out.
@jbrooks888523 күн бұрын
@HitchinMitch thank for the response man!👍 Thanks
@odinmadsen8917Ай бұрын
Hello, do you know where i can find transmission housing?
@SilverBackELTorro2 ай бұрын
Communist America. We need permits and payments. Shmdh
@efil4kizum2 ай бұрын
? Rangers rott almost as bad as tacoma... F the winter salt monster!!
@chase_t62442 ай бұрын
BTW this guys truck IS leveled so if your truck isn’t leveled it will look much more even front and back compared to this one.
@jimhendrix77762 ай бұрын
Yoyr coolant leak is moat likely your turbo fittings
@SnowIsMyTerrain24 күн бұрын
Exactly the same thing I was going to say. It is for sure on mine. Passenger side upper turbo fitting.
@jimhendrix77762 ай бұрын
It leaks cause it's under vacuum and the gasket itself hardens and flips sideways!!! Better off buying a gasket kit, if you open your old one up, you'll see they're very little that can go wrong with them.
Пікірлер
Don't know where your at but plugs here are 20 each
Dude did you seriously not realize that the video is upside-down 🙄🤷🤦
Thank you! I tried a Philips head but it didn't work. Got the broken zerk with a T15 torx bit. Much appreciated!
Hey, i stumbled across your video here. Im about to install thses exact shocks on my 2014 f150, how are they holding up so far after 4 years?
Drop in bed liners are not preaty for preaty trucks, and they don't have self cleaning system. lol. But they are life saver for those rough trucks caring concrete, rocks, planters, lawn mowers, dirt bikes etc
Are the Gabriel shocks a little longer?
How do you get the spring compression and the bolt that goes through the spring to thread ? Do you do that with the handle in or out on a table if you know what I’m saying?
Please get back to me if you would !!!!!
That was so concise and on point man.. literally that simple. Thank you, thank you, thank you!!!
If I'm doing brakes, I'm go over everything like lubing pins, changing the brake fluid and bleeding the system. If I'm just doing pads, I try to deglaze the rotors with a flap wheel on a grinder. I've even taken out grooves (shade tree turning) with the grinder, the trick for both is to spin the rotors while you hit it with the flap wheel. It's getting harder to find anyone to machine turn a rotor or drum these days with all the cheap overseas replacement parts.
Mine is a 2000 Flex that I've only done the Intake gaskets and timing chain on, and the chain was still fine at 230k miles. Ford made this motor to LAST. Not as good gas mileage as the 2.3/2.5 or power as the 4.0. But it really was a beast of an engine.
No link in description
does any body know were I can get a 1997 Polaris trail boss 250 seat Saddle?
Thank you so much for posting this!!!! I was just about to give up and go buy another one and your process worked and the sprayer is spraying. THANK YOU!!!!
Hey mines doing the same thing and will go to start it and battery will even be dead
Nice job! Not cringe at all. This will help me do mine..very thorough. Thanks
i got 2x rangers . both 94.. 1 is 3.0.. the other is 4.0... the 4.0 is built way better ! easier work on .. both got heads re done.. i know!!!! lol.. YES : i KNOW WHAT happened !!!! 2 things will do this ..#1- water to clean valves trick .. but done it too long and motor was HOT! ....#2 - best gas + 2 bottles of octane booster = engine made for 87 ... got 93 + octane booster :>).. also .. i havent seen /but suspect 93 + a TURBO.. stressed it out! ..Rebuild and use lightweight race pistons + rods + oversized valves on exhaust for power + gas mileage.. :>) ..be happy /proud man.
whats with the hat on backwards ,i guess it is cool right ?
Whats up with that loud ass music ??
the more weight you put on those shocks the better they ride/work. adding air bags just hampers the shock action and they will bounce the truck like shit. You want a nice ride then add a comfort leaf (3rd leaf) with those shocks.
Did the seal come out on its own when you pulled the axle out?
I think my eco runs better w/o the air-dam installed, but thats just me
I just installed them on my 2022 Denali 1500. Absolutely way better then factory already
Have you had a n issue with the controller saying no trailer when hooked up? I am but for some reason have light.
120k and you've virtually replaced the whole front suspension like 3 times? WTF are doing with this truck lol
Bro how did you pull your motor with your torque converter that's supposed to be attached to flex plate attached to your bell housing out that happen man lol
What year truck?
What if I cannot find original 2nd key and only have an original 1st key?
A fond memory. I had a 97 Ranger the same green. Had the same issue, once. I'd still have it, But I lost it when it got t-boned by a kid driving a 20 year old Buick I now have a 2019 Ranger
i would of welded the hitch receiver right to the atv would'nt of needed the bolt anymore and it would'nt of move anymore
What is the size of your window?
I replaced the rear pads on my moms highlander and it seams that she blew through them in under 10k miles, sounds like its metal on metal now. fronts are also bad, not sure what brand the previous owner used, but the rear are napa brand ceramic. gona try these. case 10k is nuts for ceramic IF they actually are that.
How full was you fuel tank?
You put them in the right side up. The bottle should go down, because the seals will always leak a little. It the bottle goes up the will slowly lose their oil over time. Just put some on my Frontier. Much stiffer, but they're making up for the 24 year old leafs.
Thank you I have a newer ford and this worked perfectly, luckily it just came loose so I didn’t need to use the proxy 🙏🙏
Hey Mitch, my brake controller harness and plug was actually plugged into a dummy spot on the back of the little cubby box. I was expecting to fish for it and didnt have to. That was the easiest install I've ever done.
I had a 2010 Chrysler Town and Country that notoriously had the too-small 16-inch wheels. Those were too small for the weight of the vehicle, and typically any kind of break pads wore out within 10-20,000 miles....plus incredible dust, screeching, and grabbing. The Powerstop Extreme Z36 rotors and pads on the front solved those problems.
Thank you worked like a charm 😊
Loves to hear himself talk way too much.
Music is fire
💪💪
You wore out a set of Power Stop Extreme brakes in 50,000 miles? You are very hard on brakes. Those pads should have lasted a lot longer. You must be a very aggressive driver. You may need to change up your bad driving habits. I am not a judgmental person, I am just commenting on what you said. If that was my vehicle I would be asking myself how is my driving habits causing premature brake wear out so fast. I have a 2016 Ford Escape Titanium 2.0 ecoboost with 150,000km (94,000 miles) and I am still running the original brakes. I am getting ready to install the Power Stop K6478 Z23 Evolution Sport Brake Upgrade Kit on all 4 corners of my SUV. The original brakes still work good with some brake pad material on them but I am not that kind of person. Once I feel my brakes need to be changed I change them. You can not put a dollar amount on your wife and kids lives.
Do you have the part number for the bolts? I'm having a hard time finding them
What about the new rear shocks Ole boy, did it still ride good when empty going down the road or harsh ride? Like the content!! Nice flatbed build too!
Still rode smooth as a 24 yr old truck could. I think this bed is about the same weight maybe a little heavier then the old bed, tailgate and bumper was so it out some compression on the coils to smooth it out.
@HitchinMitch thank for the response man!👍 Thanks
Hello, do you know where i can find transmission housing?
Communist America. We need permits and payments. Shmdh
? Rangers rott almost as bad as tacoma... F the winter salt monster!!
BTW this guys truck IS leveled so if your truck isn’t leveled it will look much more even front and back compared to this one.
Yoyr coolant leak is moat likely your turbo fittings
Exactly the same thing I was going to say. It is for sure on mine. Passenger side upper turbo fitting.
It leaks cause it's under vacuum and the gasket itself hardens and flips sideways!!! Better off buying a gasket kit, if you open your old one up, you'll see they're very little that can go wrong with them.
It's aluminum paneling not bodies lol