would love to see how you put the window back on. We have a Lance RV, and the windows look nearly the same.
@WhatMeeWorrry8 күн бұрын
I'll give it a try - read through questions and comments below. Thank you so much for this video!
@josiahlau2646 күн бұрын
Sorry I don’t have any footage of that. The windows have held up for 2 winters though! No fog between the panes
@WhatMeeWorrry4 күн бұрын
@@josiahlau264 When the window opens to 90 degrees, do they pop out (slip in/out) then? Or do they slide to the right or left when horizontal? You are the first one that I've found that has addressed this - so we are very thankful! While further searching, I'll see if I can contact someone at the window mfg (se-gi in our case). Safe and fun travels!
@josiahlau2644 күн бұрын
@@WhatMeeWorrry there is a foam strip that sits in the hinge. I think this keeps everything from popping out.
@weijia808810 күн бұрын
You really should get more views what such an original poem.
@oldnewadventures9 күн бұрын
Thanks! Cheesy poetry is my specialty 😂
@flbchbm25 күн бұрын
so, most of us call it a sensor flag, since a small flag passes in and out of the infrared sensor. I have mine. My problem it the paper stops when the paper gets 1/2" past the fuser. I can't find the resolution. It's probably the main circuit board, but I can't be sure since I'm not a repair tech.
@swcooperАй бұрын
Thanks for this. I found a plastic rod round behind mine the other day, will go see if I can just refit it.
@swcooperАй бұрын
I do have some bike spokes around too though...
@karldanger44199Ай бұрын
Great idea. I dont think ill need 3/16 but I may copy your design 😂 thanks for posting, 🔥🍀
@niaralosusaАй бұрын
What is the technique for re-installing the vent glass to the frame? I was inspecting my windows and one of the vent panes came off in my hands and I can’t get it back on?? I watched a couple of videos but can’t seem to figure it out. Thanks!
@GDFred88Ай бұрын
I have the same model, but not the same problem. Mine prints fine single sided all day look. But it thinks it is paper jammed when I print double sided. There is not paper jam that I can see. It prints side 2, but then errors when it is trying to print side 1 and ejects the page unprinted on side one. Any thoughts? Thanks all!!!
@cbiggers2 ай бұрын
Awesome video. Helped me figure out what was missing on a printer and what I needed to order. Fuser cover ASSY
@jasonm63332 ай бұрын
Excellent step by step instructions, and this was so valuable. Just a little piece of black tape in the right place and I'm back up and running. My part was still in place but not covering the sensor! Thanks again!
@JD-rp1fx2 ай бұрын
I have a AP-420. My kid pulled up on a black key and now it's seized (takes alot of force to push it down). What do you think might be damaged?
@user-ph8pt6hk8d2 ай бұрын
Thank you so much! Managed to fish the cabling without taking away the bottom bracket
@ng-ht1vx3 ай бұрын
I have a MFC L8900 that had that problem, but the parts were all there, and the part had just broken. I carefully plastic welded that part with a soldering iron, and it now works well. I had to adjust the part a couple of times after welding it. I also had to work the part around a little bit to make it work properly.
@saludanite3 ай бұрын
Good thoughts and conclusions. However, this is a sign of sickness and evil in the Nation actually rubbing up against us personally. If you met the thief, he would not be what you suspect him to be. Nevertheless, prayer is timely. But what about governments who seem careless about our lives anyway, and assure us that THEY are the people best chosen to protect our interests. "I've got this bridge I'll sell you..."
@oldnewadventures3 ай бұрын
I agree totally. The country is rotting from the inside out... and more government is not the solution! Thanks for the thoughts!
@saludanite3 ай бұрын
@@oldnewadventures I also think that putting a semi-permanent weighted spiked barrier under a parked RV, one which would be immoveable by thieves, is possible. Set it in place, then driving up into a position guarding the converter. Add a long-finned guard around the clamp area, to foil/break the reciprocating blade of a sawz-all. If government wants to "get-real" then we should be able to have a national alarm network to annunciate the approach of thieves under vehicles. Banks wouldn't put up with such laxity. They sometimes only give up a couple of grand per incident. Perspective! Thieves work by volume, like anybody else. Sooner or later, they'll ALL get caught in their multiple nocturnal adventures. I don't have any sympathy for thieves. This isn't Les Miserable! Winking at crime is participating in it.
@saludanite3 ай бұрын
@@oldnewadventures btw, thanks for the article. I'm not upset with you, by any means. ALL governments seem to have inertia to help the public. The personal financial losses are staggering!
@mouradm7444 ай бұрын
Thank you. What is the stand under the P80? I really thank you in advance for your help.
@cynthiatrifiro86275 ай бұрын
This video is great! That same piece broke on my printer. Brother doesn't have that part. Would you be willing to share the specifications of the piece you made?
@lizahodskins92775 ай бұрын
Unfortunately, the parts I'm interested in are not shown because they're taken out of camera range. I cant see how you get the white key out and what the end of it looks like. I have a YPR7 but I assume the keys are buillt the same way. I'm actually trying to switch a black key, but it looks like I have to remove the neighboring white keys first.
@ahmadmohammad82715 ай бұрын
Beautiful
@mapidji53527 ай бұрын
Your really have done it. The first is to know where are the sensors Second how is the function: in this case its a light barrier. Don´t forget th open rear door sensor!
@flbchbm25 күн бұрын
depending on the model, there is no rear door sensor. My MFC-9340cdw has none, since this is how card stock and envelopes are ejected - straight out the back. One must not forget to move the grey levers to adjust the fuser for paper thickness. A, B or C.
@thepgo6668 ай бұрын
Thank you for the video it helped a lot by pointed me towards disassembling the keyboard, but the method of taking the keys out you showed is improper and has a big flaw. Pushing them from the back with a screwdriver has a potential to break the plastic in the back of the key. Actual way to take them out is much more effortless. Basically the base behind every key has a cutout that stops the key from going forward. It's designed so you can insert a shim or thin screwdriver between keys(either on the left or right of the key) and bend it back, which lets the key slide out with very little force. Also instead of bending the front metal case its easier to just take the whole key assembly out - it's not really screwed down with anything so you can get it out and work on it freely.
@user-ql7fd3oh1t8 ай бұрын
You know what you don't want to see when you are less than 12hrs away from a flight and your printer dies? Taking things apart with a screwdriver. Ahahahah.... thanks for letting me know I'm in trouble, I guess.
@bobmaynard4988 ай бұрын
Do you have a link to the 12mm gasket you used?
@callumtoland74698 ай бұрын
Life saver thank you🙌
@MrBagley559 ай бұрын
Look into Journeys Off Road company in Arizona. Easy fix for some of your ideas.
@stephanc94669 ай бұрын
Great video. Got one for free today with this error
@retr0active9 ай бұрын
Super cool build!
@JohnSmithh6449 ай бұрын
Super helpful, thanks!!
@AccurateforkliftNet9 ай бұрын
Amazing video. After watching I noticed that I had a wire pushing the blade out of the way. Moved the wire and bingo!! Printer fixed. Thanks!!
@harloh957810 ай бұрын
👍👍
@user-ov9st8tv5p10 ай бұрын
I also can not get the window to go back in…I’ve been trying for hours. Any other pointers?
@josiahlau26410 ай бұрын
I removed the round sealing foam. I could not get it back in with that in place. Then I used a knife and gently inserted it back between the window panes afterwards. Is a pain.
@LoveTribeOverland10 ай бұрын
For what its worth, ive not had an appreciable difference in fuel economy going with 5 inches of lift on 30 inch tires. I still get 14-16mpg on the highway. These things dont get great fuel mileage anyway especially offroad. Where the lift gets you is increased wear on your front end parts. But its a small price to pay if you do much offroad driving.
@oldnewadventures10 ай бұрын
Thanks! I have been contemplating a 2" body lift with 30" tires. Any thoughts on the best wheel offset to avoid rubbing?
@LoveTribeOverland10 ай бұрын
@oldnewadventures I run a 245/75R-16 on a 16x8 wheel with zero offset. I had to do a minor amount of trimming the pinch welds and hammering back the "mud flap" portion of the firewall on the front wheel wells. When I say minor I'm talking 1/2- 3/4 inches. If you're running a stock bumper you'll be trimming a bit of plastic too... but thats easy peasy. The 245/75R-16 is essentially 30 1/2" by 9 inches wide tire. On a stock rim I got very little clearance for steering before the inner sidewall was rubbing on the subframe... the zero offset wheels made all the difference. Now I don't rub until I have the wheel cranked full stop... and even that is minor and rubs the "tread" portion of the tire and always at low speed so it's not a big deal. I did run into trouble in the rear wheel wells though. When we got into "full stuff" situations where the axle was at full articulation... I was getting some tire shredding rub on the front of the fender on the wheel well. It only did this when the van was fully loaded with gear and we were literally at weight capacity (or slightly more) I just installed some XHD 2100lb capacity Leaf Springs and that 100% cured the problem. (I'll be releasing a build video on this later today in fact)
@oldnewadventures10 ай бұрын
Cool thanks! I'll definitely check out your new vid!
@goldenhippie198410 ай бұрын
Beautiful. Love this 😊
@emdashes10 ай бұрын
nice setup! which audiobook were you listening to?
@oldnewadventures10 ай бұрын
Ironically, we listened to a book called Gregor the Overlander while overlanding lol
@MG-qk8tx10 ай бұрын
Excellent video. Where can I get a service manual for my Brother color laser printer HL-31C or one close to that? Thanks....
@neilcartwright10010 ай бұрын
Nice fix - well done
@stateofwander696310 ай бұрын
Quick question… I am curious about installing a Thule style rooftop cargo box on the factory Astro / safari roof rack. It seems this is what you have done, but I read on the forums perhaps the factory roof rack isn’t strong enough or fastened well enough to the roof of the van to accommodate a cargo box. Curious what your thoughts are?
@oldnewadventures10 ай бұрын
I haven't had any issues with my roofbox. I just put regular camping stuff in it like chairs, tent, tools, maybe about 100lbs worth + the weight of the box. My van didn't originally come with the roof rack, so I can't speak to the factory install. I pulled mine from an old astro in the junk yard and installed it myself with rivnuts into the roof sheet metal. I also have two extra cross bars (4 total) for tying on two kid's kayaks and it feels pretty sturdy. I wouldn't put a bit rooftop tent on it though :)
@PineappleQuesadillas11 ай бұрын
Nice work and glad you made it out safe! I took my Subaru out on the dunes last week as a spontaneous decision while driving through, and it was a really fun experience. Definitely very easy to get in over your head, but lots of friendly people around to offer advice on what to do and what not to do.
@bnighter11 ай бұрын
Can you order this part? My flag broke too and want something more reliable than I can rig up?
@runinguy11 ай бұрын
i love the safari. thanks for the vid
@thetruckersmanifesto387311 ай бұрын
I just farted and sneezed. My goly that wasn't a quief I can tell buy the itch and the stink. Ocsarmeyer chili dog in my jeans I put a smore I'm my thong it's all on my slong now I don't know what to say. It came out so easy that a stranger would think I was g a y
@bigrobsvan Жыл бұрын
One of the keys to security is making yourself less desirable than the lowest hanging fruit, which in your case would be all the RVs surrounding yours. It's kind of like passwords -- any password is better than no password, and conversely, if someone has you in their sights, few passwords are good enough. I agree that the final product looked like a heart, but disagreed with your sympathy for the thief. If it is indeed a heart, it's one that belongs to you and your family! I applaud your efforts and might have wrapped mine with barbed wire or glued broken glass to it. Spite is powerful motivation. Good luck to your defense system and I hope that security cable doesn't rattle too much! :)
@josierobinson5897 Жыл бұрын
I have not messed with dual pane windows in a long time. After sealing 2 holes can be drilled and an inert gas injected. Not hard if you have access to gas. Argon would be first choice, I have nitrogen which I would us. Time for a google search.
@Emujo1 Жыл бұрын
We have one of these..If the fuser access door is open it will run, if the fuser door is closed it jams in the exit assembly. We have replaced the Fuser and Eject assembly with no success. any ideas..
@B-ku9jy Жыл бұрын
Great video - because you pointed out the photo sensor I was able to clean mine that was blocked with paper dust and my printer now works like new again
@oldnewadventures Жыл бұрын
Awesome! Fixing a broken thing is like the best feeling ever. Good work!
@stevenbaker5099 Жыл бұрын
It is not about how much money spend. It is getting the most use out of your van. If the engine and transmission go out rebuild/or replace with remanufactured units.
@caribooskidoo3997 Жыл бұрын
A great adventure and a sweet van! I'm in BC and have a '96 hightop awd Astro with a 3" lift. Love these vans.
@qcmarcqc Жыл бұрын
Well done ! Both job and poemes ! Subbed
@oldnewadventures Жыл бұрын
Thanks!
@lilianalopez9474 Жыл бұрын
Hi and thank you for this video it really helped us, no technical assitance in my area. Now I got another situation, I'm getting a Machine error when i introduce the code *2864 88 Machine error 0501 and when i enter the *2864 82 machine error 6902, in the lcd screen I get the message PRINT UNABLE, also SELF-DIAGNOSTIC and the machine will restart itself within 15 minutes.. and that is all, never restar again and no printing at all... Any ideas?? I already try all the troubleshooting brother offers, but nothing.. Really Aprecciate any help!! Thanks...
@Tom-Fisherman Жыл бұрын
Fun video I love seeing you get your kids involved! Oh, and by the way, it’s not Cummings, it’s Cummins.
@404pug Жыл бұрын
Thank you so (oops so#1) much, I was so (so#2) frustrated that Brother does not seem to have made rear jams on CDW printer. I am so, (so#3) happy that I can get back to printing. Your bright mind as stopped me going out of my mind. Cheers from Sunny Western Australia.
@oldnewadventures Жыл бұрын
That is so awesome! So glad you enjoyed. So have yourself a wonderful day! from Canada
@victorhugodiel9727 Жыл бұрын
How to reset parts to HL-8360 kzread.info/dash/bejne/c2Wit8RvdrHUYKw.html&ab_channel=VictorHugoDiel
Пікірлер
would love to see how you put the window back on. We have a Lance RV, and the windows look nearly the same.
I'll give it a try - read through questions and comments below. Thank you so much for this video!
Sorry I don’t have any footage of that. The windows have held up for 2 winters though! No fog between the panes
@@josiahlau264 When the window opens to 90 degrees, do they pop out (slip in/out) then? Or do they slide to the right or left when horizontal? You are the first one that I've found that has addressed this - so we are very thankful! While further searching, I'll see if I can contact someone at the window mfg (se-gi in our case). Safe and fun travels!
@@WhatMeeWorrry there is a foam strip that sits in the hinge. I think this keeps everything from popping out.
You really should get more views what such an original poem.
Thanks! Cheesy poetry is my specialty 😂
so, most of us call it a sensor flag, since a small flag passes in and out of the infrared sensor. I have mine. My problem it the paper stops when the paper gets 1/2" past the fuser. I can't find the resolution. It's probably the main circuit board, but I can't be sure since I'm not a repair tech.
Thanks for this. I found a plastic rod round behind mine the other day, will go see if I can just refit it.
I do have some bike spokes around too though...
Great idea. I dont think ill need 3/16 but I may copy your design 😂 thanks for posting, 🔥🍀
What is the technique for re-installing the vent glass to the frame? I was inspecting my windows and one of the vent panes came off in my hands and I can’t get it back on?? I watched a couple of videos but can’t seem to figure it out. Thanks!
I have the same model, but not the same problem. Mine prints fine single sided all day look. But it thinks it is paper jammed when I print double sided. There is not paper jam that I can see. It prints side 2, but then errors when it is trying to print side 1 and ejects the page unprinted on side one. Any thoughts? Thanks all!!!
Awesome video. Helped me figure out what was missing on a printer and what I needed to order. Fuser cover ASSY
Excellent step by step instructions, and this was so valuable. Just a little piece of black tape in the right place and I'm back up and running. My part was still in place but not covering the sensor! Thanks again!
I have a AP-420. My kid pulled up on a black key and now it's seized (takes alot of force to push it down). What do you think might be damaged?
Thank you so much! Managed to fish the cabling without taking away the bottom bracket
I have a MFC L8900 that had that problem, but the parts were all there, and the part had just broken. I carefully plastic welded that part with a soldering iron, and it now works well. I had to adjust the part a couple of times after welding it. I also had to work the part around a little bit to make it work properly.
Good thoughts and conclusions. However, this is a sign of sickness and evil in the Nation actually rubbing up against us personally. If you met the thief, he would not be what you suspect him to be. Nevertheless, prayer is timely. But what about governments who seem careless about our lives anyway, and assure us that THEY are the people best chosen to protect our interests. "I've got this bridge I'll sell you..."
I agree totally. The country is rotting from the inside out... and more government is not the solution! Thanks for the thoughts!
@@oldnewadventures I also think that putting a semi-permanent weighted spiked barrier under a parked RV, one which would be immoveable by thieves, is possible. Set it in place, then driving up into a position guarding the converter. Add a long-finned guard around the clamp area, to foil/break the reciprocating blade of a sawz-all. If government wants to "get-real" then we should be able to have a national alarm network to annunciate the approach of thieves under vehicles. Banks wouldn't put up with such laxity. They sometimes only give up a couple of grand per incident. Perspective! Thieves work by volume, like anybody else. Sooner or later, they'll ALL get caught in their multiple nocturnal adventures. I don't have any sympathy for thieves. This isn't Les Miserable! Winking at crime is participating in it.
@@oldnewadventures btw, thanks for the article. I'm not upset with you, by any means. ALL governments seem to have inertia to help the public. The personal financial losses are staggering!
Thank you. What is the stand under the P80? I really thank you in advance for your help.
This video is great! That same piece broke on my printer. Brother doesn't have that part. Would you be willing to share the specifications of the piece you made?
Unfortunately, the parts I'm interested in are not shown because they're taken out of camera range. I cant see how you get the white key out and what the end of it looks like. I have a YPR7 but I assume the keys are buillt the same way. I'm actually trying to switch a black key, but it looks like I have to remove the neighboring white keys first.
Beautiful
Your really have done it. The first is to know where are the sensors Second how is the function: in this case its a light barrier. Don´t forget th open rear door sensor!
depending on the model, there is no rear door sensor. My MFC-9340cdw has none, since this is how card stock and envelopes are ejected - straight out the back. One must not forget to move the grey levers to adjust the fuser for paper thickness. A, B or C.
Thank you for the video it helped a lot by pointed me towards disassembling the keyboard, but the method of taking the keys out you showed is improper and has a big flaw. Pushing them from the back with a screwdriver has a potential to break the plastic in the back of the key. Actual way to take them out is much more effortless. Basically the base behind every key has a cutout that stops the key from going forward. It's designed so you can insert a shim or thin screwdriver between keys(either on the left or right of the key) and bend it back, which lets the key slide out with very little force. Also instead of bending the front metal case its easier to just take the whole key assembly out - it's not really screwed down with anything so you can get it out and work on it freely.
You know what you don't want to see when you are less than 12hrs away from a flight and your printer dies? Taking things apart with a screwdriver. Ahahahah.... thanks for letting me know I'm in trouble, I guess.
Do you have a link to the 12mm gasket you used?
Life saver thank you🙌
Look into Journeys Off Road company in Arizona. Easy fix for some of your ideas.
Great video. Got one for free today with this error
Super cool build!
Super helpful, thanks!!
Amazing video. After watching I noticed that I had a wire pushing the blade out of the way. Moved the wire and bingo!! Printer fixed. Thanks!!
👍👍
I also can not get the window to go back in…I’ve been trying for hours. Any other pointers?
I removed the round sealing foam. I could not get it back in with that in place. Then I used a knife and gently inserted it back between the window panes afterwards. Is a pain.
For what its worth, ive not had an appreciable difference in fuel economy going with 5 inches of lift on 30 inch tires. I still get 14-16mpg on the highway. These things dont get great fuel mileage anyway especially offroad. Where the lift gets you is increased wear on your front end parts. But its a small price to pay if you do much offroad driving.
Thanks! I have been contemplating a 2" body lift with 30" tires. Any thoughts on the best wheel offset to avoid rubbing?
@oldnewadventures I run a 245/75R-16 on a 16x8 wheel with zero offset. I had to do a minor amount of trimming the pinch welds and hammering back the "mud flap" portion of the firewall on the front wheel wells. When I say minor I'm talking 1/2- 3/4 inches. If you're running a stock bumper you'll be trimming a bit of plastic too... but thats easy peasy. The 245/75R-16 is essentially 30 1/2" by 9 inches wide tire. On a stock rim I got very little clearance for steering before the inner sidewall was rubbing on the subframe... the zero offset wheels made all the difference. Now I don't rub until I have the wheel cranked full stop... and even that is minor and rubs the "tread" portion of the tire and always at low speed so it's not a big deal. I did run into trouble in the rear wheel wells though. When we got into "full stuff" situations where the axle was at full articulation... I was getting some tire shredding rub on the front of the fender on the wheel well. It only did this when the van was fully loaded with gear and we were literally at weight capacity (or slightly more) I just installed some XHD 2100lb capacity Leaf Springs and that 100% cured the problem. (I'll be releasing a build video on this later today in fact)
Cool thanks! I'll definitely check out your new vid!
Beautiful. Love this 😊
nice setup! which audiobook were you listening to?
Ironically, we listened to a book called Gregor the Overlander while overlanding lol
Excellent video. Where can I get a service manual for my Brother color laser printer HL-31C or one close to that? Thanks....
Nice fix - well done
Quick question… I am curious about installing a Thule style rooftop cargo box on the factory Astro / safari roof rack. It seems this is what you have done, but I read on the forums perhaps the factory roof rack isn’t strong enough or fastened well enough to the roof of the van to accommodate a cargo box. Curious what your thoughts are?
I haven't had any issues with my roofbox. I just put regular camping stuff in it like chairs, tent, tools, maybe about 100lbs worth + the weight of the box. My van didn't originally come with the roof rack, so I can't speak to the factory install. I pulled mine from an old astro in the junk yard and installed it myself with rivnuts into the roof sheet metal. I also have two extra cross bars (4 total) for tying on two kid's kayaks and it feels pretty sturdy. I wouldn't put a bit rooftop tent on it though :)
Nice work and glad you made it out safe! I took my Subaru out on the dunes last week as a spontaneous decision while driving through, and it was a really fun experience. Definitely very easy to get in over your head, but lots of friendly people around to offer advice on what to do and what not to do.
Can you order this part? My flag broke too and want something more reliable than I can rig up?
i love the safari. thanks for the vid
I just farted and sneezed. My goly that wasn't a quief I can tell buy the itch and the stink. Ocsarmeyer chili dog in my jeans I put a smore I'm my thong it's all on my slong now I don't know what to say. It came out so easy that a stranger would think I was g a y
One of the keys to security is making yourself less desirable than the lowest hanging fruit, which in your case would be all the RVs surrounding yours. It's kind of like passwords -- any password is better than no password, and conversely, if someone has you in their sights, few passwords are good enough. I agree that the final product looked like a heart, but disagreed with your sympathy for the thief. If it is indeed a heart, it's one that belongs to you and your family! I applaud your efforts and might have wrapped mine with barbed wire or glued broken glass to it. Spite is powerful motivation. Good luck to your defense system and I hope that security cable doesn't rattle too much! :)
I have not messed with dual pane windows in a long time. After sealing 2 holes can be drilled and an inert gas injected. Not hard if you have access to gas. Argon would be first choice, I have nitrogen which I would us. Time for a google search.
We have one of these..If the fuser access door is open it will run, if the fuser door is closed it jams in the exit assembly. We have replaced the Fuser and Eject assembly with no success. any ideas..
Great video - because you pointed out the photo sensor I was able to clean mine that was blocked with paper dust and my printer now works like new again
Awesome! Fixing a broken thing is like the best feeling ever. Good work!
It is not about how much money spend. It is getting the most use out of your van. If the engine and transmission go out rebuild/or replace with remanufactured units.
A great adventure and a sweet van! I'm in BC and have a '96 hightop awd Astro with a 3" lift. Love these vans.
Well done ! Both job and poemes ! Subbed
Thanks!
Hi and thank you for this video it really helped us, no technical assitance in my area. Now I got another situation, I'm getting a Machine error when i introduce the code *2864 88 Machine error 0501 and when i enter the *2864 82 machine error 6902, in the lcd screen I get the message PRINT UNABLE, also SELF-DIAGNOSTIC and the machine will restart itself within 15 minutes.. and that is all, never restar again and no printing at all... Any ideas?? I already try all the troubleshooting brother offers, but nothing.. Really Aprecciate any help!! Thanks...
Fun video I love seeing you get your kids involved! Oh, and by the way, it’s not Cummings, it’s Cummins.
Thank you so (oops so#1) much, I was so (so#2) frustrated that Brother does not seem to have made rear jams on CDW printer. I am so, (so#3) happy that I can get back to printing. Your bright mind as stopped me going out of my mind. Cheers from Sunny Western Australia.
That is so awesome! So glad you enjoyed. So have yourself a wonderful day! from Canada
How to reset parts to HL-8360 kzread.info/dash/bejne/c2Wit8RvdrHUYKw.html&ab_channel=VictorHugoDiel