Пікірлер

• 
  @BigDaddysGarage6 күн бұрын

  TAKE MY MONEY!!!

• 
  @cesarlopez-pt2ew6 күн бұрын

  The brake caliper bracket taker offer.

• 
  @XenoRacing6 күн бұрын

  Great, you've invented a pneumatic shake weight.

• 
  @ForfeMac6 күн бұрын

  I never needed something so much in my entire life. If it's got the beans to compete with my 10lb slide hammer it'd make my shoulders very happy.

• 
  @beereadyyy98496 күн бұрын

  Man I'd love one of these for the wheel bearings here in Ontario! my knuckles hate using the slide hammer these days

• 
  @ngreed6 күн бұрын

  That looks awesome, you need to send Eric at South Main Auto one to test for sure.

• 
  @aussiehardwood61966 күн бұрын

  I like it, clever stuff Astro!

• 
  @johnturner88296 күн бұрын

  Looks quite useful. I would suggest you send one to Eric O to be put through the paces and we would probably get a nice SMA video from it.

• 
  @jeffcooper57896 күн бұрын

  SMA should be the proving ground.

• 
  @ianmorris85346 күн бұрын

  You need to send one of those to Eric O at SMA!

• 
  @gilmansgarage63416 күн бұрын

  🔨 🔥🔥

• 
  @coreydbryant29 күн бұрын

  Straight to the point... Thank you...

• 
  @53PootАй бұрын

  What's Pneumatic about this? I was taught pneumatic meant operated by air or gas under pressure.

• 
  @NRecob2 ай бұрын

  Just bought this set 78834. Thank you Astro Tools & Thank you SMA!

• 
  @DarylHiers3 ай бұрын

  What gauge metal is this? How about when they are installed in sheet metal like a car/van how easily do they tear out?

• 
  @maddog30803 ай бұрын

  Uhmmm, is it not a 9/16?

• 
  @AstroTools3 ай бұрын

  It's a modern Toyota, not in this case

• 
  @terrellscaife2411Ай бұрын

  Astro tools Customer Service totally sucks. I gotta run around for 7 to 8 months now.

• 
  @ForfeMac3 ай бұрын

  Usually I just hammer on an extractor socket or a 12pt and discard the bolt afterwards, but maybe I'll pick this up just to save me the trouble of getting the rounded bolt out of the extractor when I'm done. My half sized lug nut sockets get used all the time though.

• 
  @wurlyone46853 ай бұрын

  You guys do some really excellent tools (we see them on South Main Auto all the time!) but we just can't buy them in the UK, without ordering direct from the states and paying huge import duty. Please can you sort out a UK distributor???

• 
  @SPMech13 ай бұрын

  💪💪💪💪💪💪💪💪💪💪💪💪

• 
  @dondenny25343 ай бұрын

  God bless you all!

• 
  @worldscar64223 ай бұрын

  Am I thinking what everyone else is thinking?

• 
  @tylerfochtman15784 ай бұрын

  Tried a few different tools, should have bought this one, but I am about 3/4 of the way through the hub cutting it off 😅

• 
  @matthewkingsman58005 ай бұрын

  I want to know about compression tension, how much tightening torque can they withstand?

• 
  @farrelldewar98005 ай бұрын

  Can you vary the speed/torque?

• 
  @user-wv6jx3ce1p5 ай бұрын

  Лучше гидравликой.

• 
  @johnsmith-sk1ep6 ай бұрын

  I recently bought the adn14 and could only get it to work about 10% of the time (if that) which drew me here. I went thru about 20 rivnuts with my dewalt drill and most of the time it was a big failure, even after watching this several times, and trying different torque settings as mentioned in the manual. The drill has the torque but either it's not enough to cause the rivnut to bulge, or it strips the threads or deforms the rivnut so it's no use. I've only got this to work with my impact driver drill. It doesn't have an adjustable clutch but when driving in the rivnut it sounds like it does and if I just power thru it will install the rivnut. Don't get why though. I guess it works well enough with the impact drill that I won't return it and make my own tool.

• 
  @AdrianJayeOnline6 ай бұрын

  whats the red stuff ?

• 
  @AstroTools6 ай бұрын

  Grease

• 
  @flatbedtrucker6 ай бұрын

  Astro Tools always takes my money 👍

• 
  @hankjones29857 ай бұрын

  You my brother are amazing with the knowledge you have and the work you do. Thanks for your help!

• 
  @Wolfman_33448 ай бұрын

  I can’t find this anywhere for sale

• 
  @khg85199 ай бұрын

  try grind some groves into the pipe

• 
  @Gristourdille10 ай бұрын

  Good enough for me 😊

• 
  @buffystclair904211 ай бұрын

  Seen you using your own bolt to do this a long time ago, seen this tool on Amazon and got it 6 months ago, haven’t had a seized hub since. Maybe one day , lol

• 
  @georgiojansen7758 Жыл бұрын

  aluminimum

• 
  @Tbizzh Жыл бұрын

  Only thing I don't like about it is you have to pound out a stud, which can be a pain in it's own. Unless I'm missing something.

• 
  @quidproquo9000 Жыл бұрын

  these didn't work too good on my impreza, the PCD on the hub was too tight effectively push on the knuckle

• 
  @johnnytardes6801 Жыл бұрын

  Is there a tool kit including 2 flashlights?

• 
  @WilliamsPena Жыл бұрын

  Shout out to @southmainauto

• 
  @stevehonore7812 Жыл бұрын

  This is a excellent tool it is the best on the market I have always had excellent results with this a definite must have for a professional body tech… i car platinum tech 29 years experience.

• 
  @keysautorepair6038 Жыл бұрын

  Would love to try this light out and see how it works.

• 
  @lilwiggins26 Жыл бұрын

  Dude it doesnt fit! Lol

• 
  @JOHNMORIN100 Жыл бұрын

  That little SAID WAS A WHOLE BIG BUNCH 1000 POINTS Mr Magoo Milo, Maine 05 05 2023

• 
  @OttoThompsonReviews Жыл бұрын

  Don't buy if you have a gl450 any year because there no room behind the hub to attach the nut to the bolt

• 
  @marvinmiihlbach7007 Жыл бұрын

  Amen, glad for a non cursing video, God Blessing on you 🤠🙏

• 
  @bogguey Жыл бұрын

  I tried renting it with a manual puller a hydraulic puller nothing worked I heated it with a torch...wooww great tool I bought it for $40 canadian Yoolon 78834 Hub dismantling tool and in 5 min it was was removed it's wonderful thank you for the advice and I love your simple and easy video thank you

• 
  @biglar155 Жыл бұрын

  Thank You! That's gonna save me a lot of time in the confessional!

• 
  @GuillermoGonzalez-sv9zj Жыл бұрын

  Where the gloves at

• 
  @Parapumbito Жыл бұрын

  Its recommended not to wear gloves when using any sort of rotary tool

• 
  @GuillermoGonzalez-sv9zj Жыл бұрын

  @@Parapumbito got it 👍🏼

• 
  @GarryFishermusic Жыл бұрын

  Thanks for this video great idea

• 
  @TractorWrangler01 Жыл бұрын

  The video resolution is so poor I can't see much.

• 
  @ForfeMac Жыл бұрын

  It's a classic reupload