that could so easily have been a fatal. No injuries sound like cods wallop to me
@marionamewontwork26812 күн бұрын
wouldnt ever catch me working under a ladder someones on or going up/down
@erikgarcia377811 күн бұрын
My roofers always block the legs I fell 2 days ago same way although not that high up. Nasty muscle sprain as leg took the hit, Now I will block the legs always
@jebjed399813 күн бұрын
Did he died?
@Sharpshooter9910028 күн бұрын
very hard to believe there were no injuries, if indeed thats true
@Tom-jy3jdАй бұрын
Tie off the bottom, rule number one
@WilliamGrovesАй бұрын
Working under a ladder with someone above you,,,,,,,l brilliant,,,,, Biden/Harris 2024!
@newbeginnings8566Ай бұрын
The new Chuckle brothers..
@walterrose854Ай бұрын
As. 40 yr construction worker I have been there and nothing in funny about it. You are asked daily to do things you know aren't safe but have no choice Ext ladders are a textbook accident waiting to happen. No practical use for it, ever.
@Gizmo82477Ай бұрын
Ouches. Safety last
@westfieldracerАй бұрын
Grim Reaper got 2 for the price of 1 😂
@damon235Ай бұрын
Plenty of cheap products around to make a triple rock solid. By the way the guy on the legs folded the wrong way at least he can kick himself in the arse now 😆
@HottentadventuresАй бұрын
I used this and it keeps going into prime mode at annoying noise dont know why its doing it now it wont spray through the tip spent a grand on it not used it since
@michaelconti5787Ай бұрын
What’s up with those kids in the background laughing????? That’s sickening.
@pjb28362 ай бұрын
Not supposed to work under anyone working above, tools fall and this accident, could have been alot worse both could have broke their necks, hope all ok?
@dar40612 ай бұрын
Epic fail, what are you..12 lol
@emmaearnshaw32822 ай бұрын
I always tell people, 'It's only bad luck to go under a ladder, if there is someone on it'.
@111kirill1112 ай бұрын
Нарушение техники безобасности. Почему ни один как минимум из 3-х не подумал поддержать лестницу???
@5mjc2 ай бұрын
Those Triple Ladders are Dam Heavy vein without somebody on them with tools and steel atop caps, God, should have had a Safety Hat on !
@jebby162 ай бұрын
If you're gonna film a computer screen, at least level it to minimize distortion.
@stoagiebo12 ай бұрын
Terrible technique
@flowersandcandyflowersandc90933 ай бұрын
You could count to 1 hundred double knick out.
@petergarbutt95213 ай бұрын
NO RUBBER FEET ON THE BOTTOM OF THE LADDER... THE ONLY FAIL WAS THE BUILDER, THEY WHERE TO LAZY TO FIT THE STABILISERS BAR WITH THE RUBBER FEET, TO THE BOTTOM OF THE LADDER 🤡🤡🤡...
@geoffsullivan40633 ай бұрын
Two words.. Ladder stop. 🤕
@recall28803 ай бұрын
Ladder was way too far out
@flowersandcandyflowersandc90933 ай бұрын
The ladder wasn't locked.
@royboy45643 ай бұрын
I pray that the man working below has not been seriously injured.
@Zinerge2 ай бұрын
What about the dude on the ladder-
@its-_-foxgrrr60412 ай бұрын
I ensure you, he was much more injured than the guy on top. He cushioned the blow for the upper guy.
@ntme9Ай бұрын
He died
@AlbertoGarcia-hk6jdАй бұрын
I WISH THE LADDERS ARE OK VERY EXPENSIVE.💵💵💵💵💵
@MattHadderАй бұрын
If he is, isn't it "gods will?"
@mrstupid4 ай бұрын
I always get down that way. Saves a lot of time in the long run. You do need thick soles on the shoes for landing
@waynehardiman54434 ай бұрын
3 of them and not one could foot the ladder
@hotpotato40274 ай бұрын
Don’t blame the householder…🤷🏻♂️🤔😂🩼. I think a -20° lean to the wall was needed, you could work out that it was only a matter of time before the slip.
@111kirill1112 ай бұрын
Тоже об этом подумал. Нарушение техники безопасности.
@stephendendy83764 ай бұрын
Muppets show style
@johnthemod714 ай бұрын
Get an extension rod mate save your back plus if you overlap at 50% you will get much better coverage and a 517lp tip runs about 1600 to 1800psi to spray well hope this helps cheers
@bryanwalkerCT77294 ай бұрын
Ouch........... #BeingSaneInInsanePlaces
@heleneflynn-birks29326 ай бұрын
Hi! Do you have to seal it with anything?
@krashd7 ай бұрын
Must be a dismount method used in eastern Europe, I usually just climb back down the rungs myself.
@lesliefuller1456Ай бұрын
😂😂😂😂 love it.
@funekanohiya275611 ай бұрын
My brick is slightly darker than yours. I don't like it. I will try this
@AmitKumar-dg6bf Жыл бұрын
He guy I am from INDIA Love you brother. Your work is amazing.
@paintersstockportbrett2386 Жыл бұрын
Hi Rick, is this why we’ve not had any painting jobs passed on from you guys 😁😁👍
@garethdavies7564 Жыл бұрын
i hope you are doing a mist coat not pure paint 🤦🏻♂️
@michaelparnham1879 Жыл бұрын
The pointing is so bad should have sorted before it dried 😮
@TheLoneRanger19922 жыл бұрын
Hi I want to make my bricks lighter an some even different shades how can I get them lighter as they seem quite orangey
@solidconstruction33262 жыл бұрын
Hi there I would try using a lighter colour the products are used were by a company called total wall care and they have a product called limed wash I suggest you try on a Brick that's not that obvious and see if it helps get the colour to something more in keeping with what you wanted. You can buy several colours and mix in together making your own colours. Good luck
@davebloke8292 жыл бұрын
What the hell did they point in with? Did they use their boot heel or something?
@jenniferwarren38242 жыл бұрын
Love the technique.Where can I find this product in south Africa Johannesburg
@WINKS502 жыл бұрын
Nice work.....buy yourself some Sash Brushes!
@andybavington18932 жыл бұрын
I work for Merlin Repairs Surface Repairs Specialists and we do Brick Tinting, we use Steadfast also, personally I would of probably added a bit of Coffee Brown into the Burnt Orange to slightly darken it and maybe would of gone for 2 coats for a deeper Colour as it can dry a bit on the pale side, but a decent job in general.
@craiglyon95022 жыл бұрын
Andy wondering if you can help me mate I'm wanting to get into surface repairs can you offer any help ? Thanks 👍
@andybavington18932 жыл бұрын
@@craiglyon9502 yes Craig you can contact Merlin Repairs we are always looking for new Technicians, where are you based?
@craiglyon95022 жыл бұрын
@@andybavington1893 hi mate I've emailed them but no reply yet ? I'm Greater Manchester ways
@andybavington18932 жыл бұрын
@@craiglyon9502 I have told them to look out for your name
@craiglyon95022 жыл бұрын
@@andybavington1893 thanks mate I emailed them last week or so Manchester they are based aren't they ?
@Mowers112 жыл бұрын
I don’t see the point of what you were doing at all in the order of operations of painting a room. First of all you should paint the trim first two coats and then cover it with tape and paper. With the trim and doors completely covered you should sand all of the walls quick with 120 to 150 paper. I would encourage the use of a festival sander to contain all the dust. Now go ahead and paint the ceiling flat ceiling paint. The ceiling you may spray one coat with a 618 tip and you’re done. Then go ahead and cut in the walls next to the ceiling and around the doors and roll two coats and you’re done. This step that you are doing to me is completely unnecessary.
@djeat757 Жыл бұрын
I find if you spray wood first you have a higher build on the walls where the overspray has hit the walls and can be seen in the light. Depends on the level of perfection but for timesaving your way but when its high perfection it has to be ceiling and walls first for me. Masking up can be a drain this way though.
@xenod10662 жыл бұрын
Looks good. You can take a staining pad and cut it down to the size of the bricks, and make the work a bit faster and easier.
@philmirez2 жыл бұрын
0:00 This was very calm to have on, but then... 1:30 the pressure washer sound came on. Almost woke my cat up. My toddler was startled. 1:55 That roof is beautiful and the remainder of the video is artwork.
@maximuspareo2 жыл бұрын
Sorry I do not like your style. 1. Do not proper overlap. 2. Cofee and coulk gun in the field 3. Electric switch not protected or in the position. 4 .other electrical cable not organized for painting operation. 5. Change the speed of painting gun , stay to much in same position, sometimes to close to wall. Correct yourself.
@solidconstruction33262 жыл бұрын
Thanks for the advise, 2nd time using the spray gun so will take on board to help improve
@klinteriors74 Жыл бұрын
I think his stile is ok
@reeceslack804010 ай бұрын
Someone woke up in a bad mood fuckin hell leave him alone ya scruff
@-_AjB_-2 жыл бұрын
Tailing
@stevereed57763 жыл бұрын
What tip were you using? I have just started using the GX21 as redecorating the whole house again. I'd also be interested if you go through as much paint as I do
@fkkmag86922 жыл бұрын
What kind of pressure do u spray? Now higher the pressure how bigger the los of paint!
@solidconstruction33262 жыл бұрын
So sorry for the late repose, only just figured out how to reply on my comments, I used the green RAC X LP517 Low-Pressure Tip. that room was about 46m2 walls and ceiling I think I used about 10 L for one coat of paint
@solidconstruction33262 жыл бұрын
Sorry for the late response only just figured out how to respond to KZread comments. I I had the pressure turned up quite high but I can't recall the exact pressure. Paint the loss was not so bad
@mattkollar37943 жыл бұрын
Hey mate, thanks for the videos, not many reviews of the GX21 on KZread. How much spraying do you do with it and any issues?
@solidconstruction33262 жыл бұрын
Sorry for the late response only just figured out how to respond to KZread comments. Had no issues so far I would recommend it. Thanks for taking the time to comment pal
Пікірлер
that could so easily have been a fatal. No injuries sound like cods wallop to me
wouldnt ever catch me working under a ladder someones on or going up/down
My roofers always block the legs I fell 2 days ago same way although not that high up. Nasty muscle sprain as leg took the hit, Now I will block the legs always
Did he died?
very hard to believe there were no injuries, if indeed thats true
Tie off the bottom, rule number one
Working under a ladder with someone above you,,,,,,,l brilliant,,,,, Biden/Harris 2024!
The new Chuckle brothers..
As. 40 yr construction worker I have been there and nothing in funny about it. You are asked daily to do things you know aren't safe but have no choice Ext ladders are a textbook accident waiting to happen. No practical use for it, ever.
Ouches. Safety last
Grim Reaper got 2 for the price of 1 😂
Plenty of cheap products around to make a triple rock solid. By the way the guy on the legs folded the wrong way at least he can kick himself in the arse now 😆
I used this and it keeps going into prime mode at annoying noise dont know why its doing it now it wont spray through the tip spent a grand on it not used it since
What’s up with those kids in the background laughing????? That’s sickening.
Not supposed to work under anyone working above, tools fall and this accident, could have been alot worse both could have broke their necks, hope all ok?
Epic fail, what are you..12 lol
I always tell people, 'It's only bad luck to go under a ladder, if there is someone on it'.
Нарушение техники безобасности. Почему ни один как минимум из 3-х не подумал поддержать лестницу???
Those Triple Ladders are Dam Heavy vein without somebody on them with tools and steel atop caps, God, should have had a Safety Hat on !
If you're gonna film a computer screen, at least level it to minimize distortion.
Terrible technique
You could count to 1 hundred double knick out.
NO RUBBER FEET ON THE BOTTOM OF THE LADDER... THE ONLY FAIL WAS THE BUILDER, THEY WHERE TO LAZY TO FIT THE STABILISERS BAR WITH THE RUBBER FEET, TO THE BOTTOM OF THE LADDER 🤡🤡🤡...
Two words.. Ladder stop. 🤕
Ladder was way too far out
The ladder wasn't locked.
I pray that the man working below has not been seriously injured.
What about the dude on the ladder-
I ensure you, he was much more injured than the guy on top. He cushioned the blow for the upper guy.
He died
I WISH THE LADDERS ARE OK VERY EXPENSIVE.💵💵💵💵💵
If he is, isn't it "gods will?"
I always get down that way. Saves a lot of time in the long run. You do need thick soles on the shoes for landing
3 of them and not one could foot the ladder
Don’t blame the householder…🤷🏻♂️🤔😂🩼. I think a -20° lean to the wall was needed, you could work out that it was only a matter of time before the slip.
Тоже об этом подумал. Нарушение техники безопасности.
Muppets show style
Get an extension rod mate save your back plus if you overlap at 50% you will get much better coverage and a 517lp tip runs about 1600 to 1800psi to spray well hope this helps cheers
Ouch........... #BeingSaneInInsanePlaces
Hi! Do you have to seal it with anything?
Must be a dismount method used in eastern Europe, I usually just climb back down the rungs myself.
😂😂😂😂 love it.
My brick is slightly darker than yours. I don't like it. I will try this
He guy I am from INDIA Love you brother. Your work is amazing.
Hi Rick, is this why we’ve not had any painting jobs passed on from you guys 😁😁👍
i hope you are doing a mist coat not pure paint 🤦🏻♂️
The pointing is so bad should have sorted before it dried 😮
Hi I want to make my bricks lighter an some even different shades how can I get them lighter as they seem quite orangey
Hi there I would try using a lighter colour the products are used were by a company called total wall care and they have a product called limed wash I suggest you try on a Brick that's not that obvious and see if it helps get the colour to something more in keeping with what you wanted. You can buy several colours and mix in together making your own colours. Good luck
What the hell did they point in with? Did they use their boot heel or something?
Love the technique.Where can I find this product in south Africa Johannesburg
Nice work.....buy yourself some Sash Brushes!
I work for Merlin Repairs Surface Repairs Specialists and we do Brick Tinting, we use Steadfast also, personally I would of probably added a bit of Coffee Brown into the Burnt Orange to slightly darken it and maybe would of gone for 2 coats for a deeper Colour as it can dry a bit on the pale side, but a decent job in general.
Andy wondering if you can help me mate I'm wanting to get into surface repairs can you offer any help ? Thanks 👍
@@craiglyon9502 yes Craig you can contact Merlin Repairs we are always looking for new Technicians, where are you based?
@@andybavington1893 hi mate I've emailed them but no reply yet ? I'm Greater Manchester ways
@@craiglyon9502 I have told them to look out for your name
@@andybavington1893 thanks mate I emailed them last week or so Manchester they are based aren't they ?
I don’t see the point of what you were doing at all in the order of operations of painting a room. First of all you should paint the trim first two coats and then cover it with tape and paper. With the trim and doors completely covered you should sand all of the walls quick with 120 to 150 paper. I would encourage the use of a festival sander to contain all the dust. Now go ahead and paint the ceiling flat ceiling paint. The ceiling you may spray one coat with a 618 tip and you’re done. Then go ahead and cut in the walls next to the ceiling and around the doors and roll two coats and you’re done. This step that you are doing to me is completely unnecessary.
I find if you spray wood first you have a higher build on the walls where the overspray has hit the walls and can be seen in the light. Depends on the level of perfection but for timesaving your way but when its high perfection it has to be ceiling and walls first for me. Masking up can be a drain this way though.
Looks good. You can take a staining pad and cut it down to the size of the bricks, and make the work a bit faster and easier.
0:00 This was very calm to have on, but then... 1:30 the pressure washer sound came on. Almost woke my cat up. My toddler was startled. 1:55 That roof is beautiful and the remainder of the video is artwork.
Sorry I do not like your style. 1. Do not proper overlap. 2. Cofee and coulk gun in the field 3. Electric switch not protected or in the position. 4 .other electrical cable not organized for painting operation. 5. Change the speed of painting gun , stay to much in same position, sometimes to close to wall. Correct yourself.
Thanks for the advise, 2nd time using the spray gun so will take on board to help improve
I think his stile is ok
Someone woke up in a bad mood fuckin hell leave him alone ya scruff
Tailing
What tip were you using? I have just started using the GX21 as redecorating the whole house again. I'd also be interested if you go through as much paint as I do
What kind of pressure do u spray? Now higher the pressure how bigger the los of paint!
So sorry for the late repose, only just figured out how to reply on my comments, I used the green RAC X LP517 Low-Pressure Tip. that room was about 46m2 walls and ceiling I think I used about 10 L for one coat of paint
Sorry for the late response only just figured out how to respond to KZread comments. I I had the pressure turned up quite high but I can't recall the exact pressure. Paint the loss was not so bad
Hey mate, thanks for the videos, not many reviews of the GX21 on KZread. How much spraying do you do with it and any issues?
Sorry for the late response only just figured out how to respond to KZread comments. Had no issues so far I would recommend it. Thanks for taking the time to comment pal