I think you forgot to put the trigger group back in and tried to cover for it. You shouldn't smoke weed before doing this stuff.
@Weout773 ай бұрын
I have M3000. Not enough aftermarket parts
@Masaki-133410 ай бұрын
Only video on youtube thay explains it how it needs to be done. Not how the individual feels they should start the process in the video. You start at step 1 not step1(actually step 3) So thank you.
@matthewi.minnick5845 Жыл бұрын
Why spend 2 minutes griping about the charging handle? Otherwise, good video. Thanks.
@RexArms Жыл бұрын
Thank you for the feedback, we will keep that in mind for later.
@user-km2pw2mj9w Жыл бұрын
How much long does it the new spring; i have a stoeger m3000 and i picked a benelli extended with+5 shells but i have problem with the shells (don't take inside the barell) The length of spring is 80 cm. Thank you!!!
@uninspiredrambler Жыл бұрын
She likes hot ammo. If I was willing to spend the cash I'd get a benelli or other expensive but super reliable gun for defense. But for the money this is a hell of a gun. After some breaking in it kinda can cycle light loads, but don't rely on it. Also it does require you to take the recoil like a man to cycle properly. Not saying unreliable, but don't try to cheat it & expect to get good results. But you can ghost load these bad boys! Haven't had any trouble with that
@budgetfriendlyfirearms7972 Жыл бұрын
so why do you remove that metal retainer at the end of the mag tube and the spring?? and do you need to replace it with a longer spring??
@RexArms Жыл бұрын
In a later video we add a magazine tube extension so the retainer had to be removed for that. We also added a metal follower but didn't do a video on it.
@alserrette Жыл бұрын
What is the sence of taking things apart off screen for a disassemble video?
@mattholley3642 Жыл бұрын
Great video Rex Arms. Considering buying one of these M3000’s myself in the 24inch length. What do you think about the general weight and balance of the gun? What capacity does it come up to without the limiter in the tube?
@RexArms Жыл бұрын
Personally I've bought a couple and I love them. I use them for competition in three gun skeet and also for hunting waterfowl. They balance pretty well, point well, are extremely reliable. The aftermarket has also embraced the shotgun and with the use of Beretta Benelli mobile chokes, the shotgun really has the ability to do what you need it to do. In regard to chokes my favorite are the Carlson extended for duck season I'm using the Carlson's Cremator Non-Ported Choke Tubes. Normally I'll use the MR and LR for bird hunting, for 3 Gun and skeet I use their extended improved modified as those pattern the best at the normal ranges I shoot with the ammo I use.
@RexArms Жыл бұрын
Without the limiter it has 4+1 capacity.
@mattholley3642 Жыл бұрын
@@RexArms Sounds like you’re enjoying your M3000 to the fullest! I’m definitely going to pick one up, I’ve been looking for an affordable, reliable inertia semi auto that will take Mobil chokes. Stoeger also makes competition 3 gun shotguns on the same receiver (I think it’s called the M3K) so the receiver is already drilled and tapped for a pic rail. I want to buy an M3000, screw a ported tactical Carlsons cylinder choke, put a red dot on it and use it out to 100 yards with slugs. Such a versatile gun.
@mattholley3642 Жыл бұрын
@@RexArms Thank you very much
@mgonzalez562 Жыл бұрын
So the spring retainer is not needed?
@BlackCloudIndustries Жыл бұрын
Nope, don't need it.
@plaguedduck6858 Жыл бұрын
Rex, where is the rest of the tutorial?
@RexArms Жыл бұрын
We've been a bit busy for a long while, and our video skills need improvement so we're learning how not to suck at making videos.
@plaguedduck6858 Жыл бұрын
@@RexArms I believe that this video is still neat and useful while still staying professional. Please reply when you make a pt.2.
@petervranovsky8204 Жыл бұрын
this could be pretty helpful 7min video if it wasn't very very bad 15 min one
@RexArms Жыл бұрын
Thanks for the input we're working on sucking less.
@ryanhunt48682 жыл бұрын
3:34-3:37 that spring there, how important is it to make sure that spring goes in the same way it came off. I ask because I dropped it during cleaning and both ends are pretty identical so just curious if there IS a certain way that slides back on the barrel or you can slide it back either way you flip it? Sorry, It's my first 12 gauge automatic so I don't want to mess it up. Thanks if anyone cared to get this far is the post, any advice?
@BlackCloudIndustries2 жыл бұрын
I was looking at mine and I don't see a difference if it goes on one way or another.
@markthornhill5192 жыл бұрын
Did you ever make a bolt handle for the Stoegers?
@dmuhl842 жыл бұрын
Quit watching at the springs are evil...get on with it
@mr.camarena67452 жыл бұрын
Mine is having cycling issues and it's new what do you think it is help please???
@gerondale50313 жыл бұрын
helpful video but whoever designed the spring keeper needs to find a new job...
@facemower13 жыл бұрын
Not sure this guy actually knows what he’s doing
@RexArms Жыл бұрын
Does this guy know what he's doing making videos? No, definitely not. I have degrees in gunsmithing and long years running metal working machines, engineering, welding, and prototyping. Does he know gunsmithing? Yes. Is this guy good at public speaking? No... I super hate it. I machine stuff and fix things. Bare with me while I figure this stuff out.
@arkzgun3 жыл бұрын
whats the orange rod you pulled out??
@RexArms3 жыл бұрын
That's called a Magazine Limiter Plug. The Magazine Limiter allows a duck hunter for instance, to remain compliant with Federal shell capacity regulations when hunting water foul.
@mattholley3642 Жыл бұрын
@@RexArms Do you know what the capacity is without the orange limiter in it? Will it hold 5 2-3/4 inch shells?
@RexArms Жыл бұрын
@@mattholley3642 4+1
@howardweiss94223 жыл бұрын
Hi. How did you get the pin holding the breech bolt latch out? What tools did you use? I tried using a punch and my gunsmith hammer but they did nothing. Thanks
@user-pn6fo2cl9v3 жыл бұрын
Hi. Where did you buy the parts?
@RexArms Жыл бұрын
TTI and Brownells.
@waterfowler80783 жыл бұрын
Taking to long your not a comic !
@RexArms Жыл бұрын
I'll take that under advisement.
@marksc19293 жыл бұрын
...great video ...thx 👍
@deanblackburn63804 жыл бұрын
Anyone recommend a better stronger driver spring? Wolffe doesnt make one.
@RexArms Жыл бұрын
That's a good question, Sprinco approached us about custom springs at ShotShow but we've not discussed anything further about custom applications. Don't have any solid suggestions other then stock replacement.
@guerom13674 жыл бұрын
Mine came with the extended mag tube and a red metal follower. Wouldve been nice if they made the safety blue to match the rest. Also mine didnt come with a clamp for the tube and barrel. In a way its probably better for easier field stripping. Do u think its necessary?
@RexArms Жыл бұрын
Is the clamp necessary? No Helpful? Yes
@danilobadua77754 жыл бұрын
Poor camera angles can't see exactly where things are, plenty of useless comments.
@RexArms Жыл бұрын
Thanks for the input, trying to figure out this video stuff.
@theheretic37645 жыл бұрын
You need to cut that thing brother.
@brianonthego5 жыл бұрын
I like that length extension. What is the capacity now?
@RexArms Жыл бұрын
After the extension added in the video we had 10+1. The stock Stoeger M3000 holds 4+1 rounds, the tube used was a 6 round extension giving us 10+1.
@TheJohnqpyro5 жыл бұрын
You LOST me at "Springs, Springs, Springs...……" Enough already, get on with it !!!!
@RobotRiedingerEd5 жыл бұрын
Thanks for this helpful video. Looking forward to more.
@country_boy216 жыл бұрын
For some reason the spring inside of the bolt rattles is that normal
@StayHumble2486 жыл бұрын
Hey bud, do you know how to take off the stock?
@tysonbolen74223 жыл бұрын
Casey Henehan did u ever find out how to
@StayHumble2483 жыл бұрын
@@tysonbolen7422 I did, do you need some help?
@vanillathundr243 жыл бұрын
@@StayHumble248 I just purchased the upgraded pistol grip stock for my M3500. How do I install it?
@StayHumble2483 жыл бұрын
@@vanillathundr24 there should be two holes in the rubber at the end of the stock. Use a philips screwdriver to unscrew those. Once rubber is out, use a socket (ideally screwdriver type, you need to get deep) and there's a bolt to loosen. Loosen that up and the stock should come off and you're good to go.
@StayHumble2483 жыл бұрын
@@vanillathundr24 and if answer was confusing, go here and watch from like 1min to a 1:30 kzread.info/dash/bejne/pquCppWFYaXRfKw.html
@arthurdent59036 жыл бұрын
Don't quit your day job.
@RexArms Жыл бұрын
Thanks for the input 👍🏻
@CJRKENT76976 жыл бұрын
we aren't interested in your attempt at comedy, we have cone to learn about your topic
@RexArms Жыл бұрын
Thank you for the input. That's actually helpful.
@jesseg67086 жыл бұрын
Looks like the franchi and not the m2 benelli
@BlackCloudIndustries6 жыл бұрын
I like this version better then the first one you did. Step in the right direction. Get a better mic though...
@RexArms6 жыл бұрын
Thank you we value the feedback.
@johnbarbour16046 жыл бұрын
I was trying to assemble the gun after disassembling it and I put the rail on without the bolt inside, the spring went all the way back and now I can't get the bolt in or the rail out. Please help
@RexArms6 жыл бұрын
Send us a message on our Facebook page with pictures, and we'll try and help you out. facebook.com/rexarmsllc/
@Heresastory23Ай бұрын
Any more leads on this? The same thing happened to me
@Heresastory23Ай бұрын
Need help with the same thing
@davidgiles97517 жыл бұрын
Will enhanced bolt charging handles for the m3000 work on the m3020?
@RexArms6 жыл бұрын
Excellent question, we've tried it on the M3500 but haven't tried a M3020.
@chassoto7 жыл бұрын
2:42 That's what she said.
@RexArms6 жыл бұрын
Haha... Yes she did.
@Wesamonamos4 жыл бұрын
Giggity giggity
@ashylarry74117 жыл бұрын
ummmmmmmmm counter : I stopped after 15.
@RexArms Жыл бұрын
Today's video brought to you by the word "Umm" friend of the unscripted.
@gerardv52427 жыл бұрын
um...annoying.
@RexArms6 жыл бұрын
Anything specific?
@4150CHF7 жыл бұрын
Repeal the NFA and the Hughes Amendment petitions.whitehouse.gov/petition/repeal-1986-hughes-amendment petitions.whitehouse.gov/petition/repeal-nfa
@imperialgaming48287 жыл бұрын
This is a disassembly not a review on each fucking part, shut up and take the fucking gun apart
@RexArms7 жыл бұрын
What a lovely opinion. We will take it in advisement for later. Just to help you out, remember that this is the internet, if you don't like it, you don't have to watch it. That being said we are open to helpful suggestions of how to make our videos better and more helpful for the future.
@imperialgaming48287 жыл бұрын
Rex Arms :]
@jkdniel6 жыл бұрын
Rex Arms You are damn right. I don’t have to watch, but thanks to this platform I get to comment. So....you are definitely no Sootch00, IV8888 or MAC. Stick to your day job. Not meaning to be insensitive but if you want to put out helpful videos, then take a clue from the successful gun channels. “Oh shoot...oh no, failure to fire. Wow. What in the world?” You lost me right there didn’t watch anymore.
@2011payday7 жыл бұрын
how big of a extention is it
@RexArms7 жыл бұрын
It's a six round extension from Nordic Components. nordiccomp.com/categories/new-nc-mxt-shotgun-extension-complete-assembly-12ga/
@2011payday7 жыл бұрын
Rex Arms thanks
@2011payday7 жыл бұрын
is that 26 or 28 inch barrel?
@RexArms7 жыл бұрын
The Stoeger M3000 in the video is a 28 inch with the 6 round extension and the extension is nearly flush. The one Jason uses in 3 Gun is that same 28 inch, but he uses an 8 round extension (Not flush), Carlson extended Light Modified and Improved modified chokes, and uses it like a scalpel. The weight is really low compared to other setups and He loves it.
Пікірлер
I think you forgot to put the trigger group back in and tried to cover for it. You shouldn't smoke weed before doing this stuff.
I have M3000. Not enough aftermarket parts
Only video on youtube thay explains it how it needs to be done. Not how the individual feels they should start the process in the video. You start at step 1 not step1(actually step 3) So thank you.
Why spend 2 minutes griping about the charging handle? Otherwise, good video. Thanks.
Thank you for the feedback, we will keep that in mind for later.
How much long does it the new spring; i have a stoeger m3000 and i picked a benelli extended with+5 shells but i have problem with the shells (don't take inside the barell) The length of spring is 80 cm. Thank you!!!
She likes hot ammo. If I was willing to spend the cash I'd get a benelli or other expensive but super reliable gun for defense. But for the money this is a hell of a gun. After some breaking in it kinda can cycle light loads, but don't rely on it. Also it does require you to take the recoil like a man to cycle properly. Not saying unreliable, but don't try to cheat it & expect to get good results. But you can ghost load these bad boys! Haven't had any trouble with that
so why do you remove that metal retainer at the end of the mag tube and the spring?? and do you need to replace it with a longer spring??
In a later video we add a magazine tube extension so the retainer had to be removed for that. We also added a metal follower but didn't do a video on it.
What is the sence of taking things apart off screen for a disassemble video?
Great video Rex Arms. Considering buying one of these M3000’s myself in the 24inch length. What do you think about the general weight and balance of the gun? What capacity does it come up to without the limiter in the tube?
Personally I've bought a couple and I love them. I use them for competition in three gun skeet and also for hunting waterfowl. They balance pretty well, point well, are extremely reliable. The aftermarket has also embraced the shotgun and with the use of Beretta Benelli mobile chokes, the shotgun really has the ability to do what you need it to do. In regard to chokes my favorite are the Carlson extended for duck season I'm using the Carlson's Cremator Non-Ported Choke Tubes. Normally I'll use the MR and LR for bird hunting, for 3 Gun and skeet I use their extended improved modified as those pattern the best at the normal ranges I shoot with the ammo I use.
Without the limiter it has 4+1 capacity.
@@RexArms Sounds like you’re enjoying your M3000 to the fullest! I’m definitely going to pick one up, I’ve been looking for an affordable, reliable inertia semi auto that will take Mobil chokes. Stoeger also makes competition 3 gun shotguns on the same receiver (I think it’s called the M3K) so the receiver is already drilled and tapped for a pic rail. I want to buy an M3000, screw a ported tactical Carlsons cylinder choke, put a red dot on it and use it out to 100 yards with slugs. Such a versatile gun.
@@RexArms Thank you very much
So the spring retainer is not needed?
Nope, don't need it.
Rex, where is the rest of the tutorial?
We've been a bit busy for a long while, and our video skills need improvement so we're learning how not to suck at making videos.
@@RexArms I believe that this video is still neat and useful while still staying professional. Please reply when you make a pt.2.
this could be pretty helpful 7min video if it wasn't very very bad 15 min one
Thanks for the input we're working on sucking less.
3:34-3:37 that spring there, how important is it to make sure that spring goes in the same way it came off. I ask because I dropped it during cleaning and both ends are pretty identical so just curious if there IS a certain way that slides back on the barrel or you can slide it back either way you flip it? Sorry, It's my first 12 gauge automatic so I don't want to mess it up. Thanks if anyone cared to get this far is the post, any advice?
I was looking at mine and I don't see a difference if it goes on one way or another.
Did you ever make a bolt handle for the Stoegers?
Quit watching at the springs are evil...get on with it
Mine is having cycling issues and it's new what do you think it is help please???
helpful video but whoever designed the spring keeper needs to find a new job...
Not sure this guy actually knows what he’s doing
Does this guy know what he's doing making videos? No, definitely not. I have degrees in gunsmithing and long years running metal working machines, engineering, welding, and prototyping. Does he know gunsmithing? Yes. Is this guy good at public speaking? No... I super hate it. I machine stuff and fix things. Bare with me while I figure this stuff out.
whats the orange rod you pulled out??
That's called a Magazine Limiter Plug. The Magazine Limiter allows a duck hunter for instance, to remain compliant with Federal shell capacity regulations when hunting water foul.
@@RexArms Do you know what the capacity is without the orange limiter in it? Will it hold 5 2-3/4 inch shells?
@@mattholley3642 4+1
Hi. How did you get the pin holding the breech bolt latch out? What tools did you use? I tried using a punch and my gunsmith hammer but they did nothing. Thanks
Hi. Where did you buy the parts?
TTI and Brownells.
Taking to long your not a comic !
I'll take that under advisement.
...great video ...thx 👍
Anyone recommend a better stronger driver spring? Wolffe doesnt make one.
That's a good question, Sprinco approached us about custom springs at ShotShow but we've not discussed anything further about custom applications. Don't have any solid suggestions other then stock replacement.
Mine came with the extended mag tube and a red metal follower. Wouldve been nice if they made the safety blue to match the rest. Also mine didnt come with a clamp for the tube and barrel. In a way its probably better for easier field stripping. Do u think its necessary?
Is the clamp necessary? No Helpful? Yes
Poor camera angles can't see exactly where things are, plenty of useless comments.
Thanks for the input, trying to figure out this video stuff.
You need to cut that thing brother.
I like that length extension. What is the capacity now?
After the extension added in the video we had 10+1. The stock Stoeger M3000 holds 4+1 rounds, the tube used was a 6 round extension giving us 10+1.
You LOST me at "Springs, Springs, Springs...……" Enough already, get on with it !!!!
Thanks for this helpful video. Looking forward to more.
For some reason the spring inside of the bolt rattles is that normal
Hey bud, do you know how to take off the stock?
Casey Henehan did u ever find out how to
@@tysonbolen7422 I did, do you need some help?
@@StayHumble248 I just purchased the upgraded pistol grip stock for my M3500. How do I install it?
@@vanillathundr24 there should be two holes in the rubber at the end of the stock. Use a philips screwdriver to unscrew those. Once rubber is out, use a socket (ideally screwdriver type, you need to get deep) and there's a bolt to loosen. Loosen that up and the stock should come off and you're good to go.
@@vanillathundr24 and if answer was confusing, go here and watch from like 1min to a 1:30 kzread.info/dash/bejne/pquCppWFYaXRfKw.html
Don't quit your day job.
Thanks for the input 👍🏻
we aren't interested in your attempt at comedy, we have cone to learn about your topic
Thank you for the input. That's actually helpful.
Looks like the franchi and not the m2 benelli
I like this version better then the first one you did. Step in the right direction. Get a better mic though...
Thank you we value the feedback.
I was trying to assemble the gun after disassembling it and I put the rail on without the bolt inside, the spring went all the way back and now I can't get the bolt in or the rail out. Please help
Send us a message on our Facebook page with pictures, and we'll try and help you out. facebook.com/rexarmsllc/
Any more leads on this? The same thing happened to me
Need help with the same thing
Will enhanced bolt charging handles for the m3000 work on the m3020?
Excellent question, we've tried it on the M3500 but haven't tried a M3020.
2:42 That's what she said.
Haha... Yes she did.
Giggity giggity
ummmmmmmmm counter : I stopped after 15.
Today's video brought to you by the word "Umm" friend of the unscripted.
um...annoying.
Anything specific?
Repeal the NFA and the Hughes Amendment petitions.whitehouse.gov/petition/repeal-1986-hughes-amendment petitions.whitehouse.gov/petition/repeal-nfa
This is a disassembly not a review on each fucking part, shut up and take the fucking gun apart
What a lovely opinion. We will take it in advisement for later. Just to help you out, remember that this is the internet, if you don't like it, you don't have to watch it. That being said we are open to helpful suggestions of how to make our videos better and more helpful for the future.
Rex Arms :]
Rex Arms You are damn right. I don’t have to watch, but thanks to this platform I get to comment. So....you are definitely no Sootch00, IV8888 or MAC. Stick to your day job. Not meaning to be insensitive but if you want to put out helpful videos, then take a clue from the successful gun channels. “Oh shoot...oh no, failure to fire. Wow. What in the world?” You lost me right there didn’t watch anymore.
how big of a extention is it
It's a six round extension from Nordic Components. nordiccomp.com/categories/new-nc-mxt-shotgun-extension-complete-assembly-12ga/
Rex Arms thanks
is that 26 or 28 inch barrel?
The Stoeger M3000 in the video is a 28 inch with the 6 round extension and the extension is nearly flush. The one Jason uses in 3 Gun is that same 28 inch, but he uses an 8 round extension (Not flush), Carlson extended Light Modified and Improved modified chokes, and uses it like a scalpel. The weight is really low compared to other setups and He loves it.
Rex Arms thanks