Пікірлер

• 
  @andrewlane518617 сағат бұрын

  What motor do you use? How do you connect the rudder? I’d like to make one!

• 
  @M.SKhan12316 сағат бұрын

  I used 1400kv BLDC motor. For Rudder, I used servo which are inside of the plane connected by wire (steel/copper). I will also make another video, hopefully, a test flight and electronics.

• 
  @vuneunaКүн бұрын

  Boht shandar

• 
  @vuneuna2 күн бұрын

  So good❤😮😮😮

• 
  @soytonnison3 күн бұрын

  Awesome project, would be helpful to have a parts list included, maybe that would engage people more ! !!!!!!! super cool channel

• 
  @M.SKhan1232 күн бұрын

  Thanks and if you want to make this I can give all the info to you, let me know.

• 
  @jim-66113 күн бұрын

  Does non-commercial use mean I can't sell the rugs? But anyway, the project is really cool.

• 
  @M.SKhan1233 күн бұрын

  Thanks, lt is not fully complete because of no intrust of viewers.

• 
  @HakkiKrks4 күн бұрын

  excellent design ❤

• 
  @M.SKhan1234 күн бұрын

  thanks

• 
  @carolinamariaduquemejia69814 күн бұрын

  can you share the settings, i have a ender 3 pro

• 
  @M.SKhan1234 күн бұрын

  Check this link and description you will find all you need kzread.info/dash/bejne/nntmtduEpLzfY6g.html

• 
  @carolinamariaduquemejia69814 күн бұрын

  i have a ender 3 pro, can you share the setting that you used, to print with this quality

• 
  @M.SKhan1234 күн бұрын

  Check this link and description you will find all you need kzread.info/dash/bejne/nntmtduEpLzfY6g.html

• 
  @mr3dp4 күн бұрын

  very good

• 
  @M.SKhan1234 күн бұрын

  Thanks

• 
  @MrJackfriday4 күн бұрын

  whats your print settings for RPET?

• 
  @M.SKhan1234 күн бұрын

  This is slicer settings for this model 2 LAYERS TOP BOTTOM 1 PARAMETER 260 DEG TEMP NOZEL 60 DEG BED TEMP 80 T0 120 MM PRINT SPEED NO INFILL SPIRAL MODE 0.2 LAYER HEIGHT NO RETRACTION

• 
  @carolinamariaduquemejia69814 күн бұрын

  @@M.SKhan123 only in this, o you never used retraction ?, i have a ender 3 pro and i dont know why the layer adhesion is terrible

• 
  @M.SKhan1234 күн бұрын

  @@carolinamariaduquemejia6981 No retration for this model only otherwise 1 mm to 1.5 mm retraction distance 70 mm retraction speed or more. Some mods have to be made in hotend for good results.

• 
  @khanbaba3654 күн бұрын

  🎉🎉🎉🎉🎉

• 
  @M.SKhan1234 күн бұрын

  Shukria .Aj konsi dish banai ha

• 
  @M.SKhan1234 күн бұрын

  More Details and Files @kzread.info/dash/bejne/nntmtduEpLzfY6g.html

• 
  @invis78493 күн бұрын

  Does it fly? Also that link doesn’t work 😢

• 
  @M.SKhan1233 күн бұрын

  kzread.info/dash/bejne/nntmtduEpLzfY6g.html

• 
  @M.SKhan1233 күн бұрын

  Flying in the next video if it gets some response from viewers.

• 
  @daliasprints97984 күн бұрын

  You've got some of the cleanest rPET prints I've seen on KZread. Nice project. PET is rather heavy (dense) for this at 1.38 g/cm³, a lot more than other printable materials, but it's also way tougher especially the layer bond strength.

• 
  @IIMTAII4 күн бұрын

  Nice

• 
  @khanbaba3655 күн бұрын

  🎉😮❤🎉😮

• 
  @HakkiKrks5 күн бұрын

  You are one of the channels I follow, I opened a channel, I follow you from your new channel account.

• 
  @M.SKhan1235 күн бұрын

  NOW I AM YOUR FOLLOWER TOO THANKS FOR THE COMMENTS.

• 
  @HakkiKrks4 күн бұрын

  @@M.SKhan123 Thank you for your support :)

• 
  @M.SKhan1234 күн бұрын

  @@HakkiKrks WELLCOME ALLWAYS

• 
  @aresrobotik25945 күн бұрын

  You are doing really good things. Congratulations.

• 
  @MAUDI-n3r5 күн бұрын

  quelle référence pour le moteur ? ou l acheter ?

• 
  @M.SKhan1234 күн бұрын

  Le moteur Ita 775 est couramment disponible dans les magasins ou vous pouvez le récupérer sur d'anciennes imprimantes à jet d'encre HP.

• 
  @obregr5 күн бұрын

  simply amazing

• 
  @M.SKhan1235 күн бұрын

  THANKS

• 
  @obregr5 күн бұрын

  hard as hell

• 
  @PakiJeel5 күн бұрын

  What's your process for joining the filament?

• 
  @M.SKhan1234 күн бұрын

  I prefer not to join the filament, pause the print, and reload another one,

• 
  @PakiJeel4 күн бұрын

  @@M.SKhan123 Doesn't that result in a visible seam which is weaker as compared to other layers? Also you would have to flush the blob that appears after pushing in filament right?

• 
  @M.SKhan1233 күн бұрын

  I used to change the filament while printing infill that hid any imperfections. You can make 38 feet of filament from 2.25 liters and 30 feet from 1.5 liters bottle, and 95 % prints can be easily printed in this range.

• 
  @PakiJeel3 күн бұрын

  @@M.SKhan123 Thank You for the explanation, clear as usual! What thickness do you strip the 2.25 Cola bottles at? I have a calliper but it is +/-.1mm so can't use it for accurate measurment of the thickness which will enable me to guage the thickness of the strip.

• 
  @khanbaba3656 күн бұрын

  🎉😮🎉😮

• 
  @en2oh10 күн бұрын

  How do you get the compression effect in the screw? Ie the inner Shasta of the cut screw needs to be tapered to get the compression/metering effect, right?

• 
  @FacundoGimenez-o5k11 күн бұрын

  can you make a video desassembling the machine plelase, i can't make your machine cause i don't understand how can i to assemble this

• 
  @M.SKhan12310 күн бұрын

  I am making a simpler version. It will be finished in 1 month or so

• 
  @FacundoGimenez-o5k9 күн бұрын

  @@M.SKhan123 It’s just that I printed this version from thingiverse and I don’t know how to put it together or what pieces I’m missing😞

• 
  @M.SKhan1238 күн бұрын

  @@FacundoGimenez-o5k The assembly is the same as video kzread.info/dash/bejne/nYCKmsSKYtC3ZNI.html

• 
  @FacundoGimenez-o5k8 күн бұрын

  @@M.SKhan123 ty so much man!

• 
  @M.SKhan1238 күн бұрын

  @@FacundoGimenez-o5k Wellcome

• 
  @danielcesar525111 күн бұрын

  Qual o diâmetro da fita de garrafa pet?

• 
  @M.SKhan12310 күн бұрын

  8.5mm

• 
  @tornadofast13 күн бұрын

  Hi, stl please😁🙏

• 
  @M.SKhan12313 күн бұрын

  Click the link on the video you will find what you need.

• 
  @donediy13 күн бұрын

  bohat kamal bhai ma ny bana liya best ha

• 
  @M.SKhan12313 күн бұрын

  Good

• 
  @arshadshoo13 күн бұрын

  Bhai ya rok jata ha barring charp b kar liya ha ​@@M.SKhan123

• 
  @M.SKhan12313 күн бұрын

  @@arshadshoo 2 reason ho sakty hain motor ki power kam ha thori voltage ziada ker k dekh lein ya phir bearings tight fit hain spacer check ker lein aur koi reason naein ho ga bearings ki fittings check ker lein na boat tight hoon aik dosery ki sath

• 
  @MrNorman9114 күн бұрын

  𝙷𝚎𝚢, 𝙸'𝚕𝚕 𝚖𝚊𝚔𝚎 𝚊 𝚟𝚒𝚍𝚎𝚘 𝚊𝚋𝚘𝚞𝚝 𝚝𝚑𝚒𝚜 𝚍𝚎𝚜𝚒𝚐𝚗, 𝙸 𝚖𝚘𝚍𝚒𝚏𝚒𝚎𝚍 𝚒𝚝 𝚝𝚘 𝚐𝚎𝚝 𝚠𝚑𝚊𝚝 𝚖𝚢 𝚗𝚎𝚎𝚍𝚜, 𝙸'𝚕𝚕 𝚋𝚎 𝚙𝚘𝚜𝚝𝚒𝚗𝚐 𝚝𝚑𝚎 𝚟𝚒𝚍𝚎𝚘 𝚜𝚘𝚘𝚗. 𝚃𝚑𝚊𝚗𝚔𝚜 𝚏𝚘𝚛 𝚖𝚊𝚔𝚒𝚗𝚐 𝚒𝚝 𝚏𝚛𝚎𝚎.

• 
  @rproc812716 күн бұрын

  Очень круто!

• 
  @M.SKhan12315 күн бұрын

  Спасибо

• 
  @HeimdallAfBifrost16 күн бұрын

  If only someone invented pet bottle recycling.

• 
  @sand_man346716 күн бұрын

  stl files where?

• 
  @M.SKhan12316 күн бұрын

  wait for 2 or 3 days

• 
  @khanbaba36516 күн бұрын

  🎉😮❤

• 
  @PakiJeel16 күн бұрын

  Dera manana! If you are interested I can share the link for discord server of recreator 3d! It is a hub of knowledge for pulltrusion and related stuff! You will be an extremely welcome addition!

• 
  @alonsojulio572516 күн бұрын

  Could you share the STL files to build the machine?

• 
  @M.SKhan12316 күн бұрын

  There is a link at the start of the video click to open and it will lead you to the main video. You will find all instructions and links to files in the description.

• 
  @PakiJeel16 күн бұрын

  What speed are you printing at? Also do you have a bowden setup or direct drive? And is it dual gear extruder?

• 
  @M.SKhan12316 күн бұрын

  Direct drive is better for PET but Bowden works too, I use a single drive and the speed is 80 to 120 mm.

• 
  @Erosgenuino19 күн бұрын

  Hola, ¿con qué filamento has hecho las piezas?

• 
  @M.SKhan12317 күн бұрын

  Este filamento está fabricado a partir de botellas de plástico pet para impresoras 3d.

• 
  @khanbaba36519 күн бұрын

  🎉😮

• 
  @PakiJeel22 күн бұрын

  AoA! Salaam from Pakistan! I just stummbled across your videos! Happy to see a fellow country man into 3d printing! I also am trying to make a PET bottle recycling machine (Petamentor), which had issues with the bearing cutter. Also making an MPCNC for some hobby project. Have an Ender 3 Pro! Would love to talk and share insight! ❤

• 
  @M.SKhan12322 күн бұрын

  W S . Thanks for the comments Good to know one more Pakistani in this hobby. Please share your work with others.

• 
  @Armada201022 күн бұрын

  Thanks! Very nice 👍👍

• 
  @hassenriahi348623 күн бұрын

  Marlin software?

• 
  @M.SKhan12322 күн бұрын

  yes

• 
  @hassenriahi348622 күн бұрын

  Is there a way to chat with you about it?

• 
  @khanbaba36523 күн бұрын

  ❤😮

• 
  @ArranAsh23 күн бұрын

  Nice renders! I was just about to get the parts for V1, might be worth linking to V2 at the top of V1's description. I'll post a make on thingiverse once everything's printed and assembled!

• 
  @M.SKhan12322 күн бұрын

  Thanks I will wait for your make

• 
  @obregr23 күн бұрын

  does it fly?

• 
  @M.SKhan12323 күн бұрын

  It will fly but the crash is obvious because I am a newbie.

• 
  @obregr23 күн бұрын

  @@M.SKhan123 did you hava any rizrforrc plane,?

• 
  @M.SKhan12323 күн бұрын

  @@obregr Not particularly, it is hard to print thin wall planes due to the retraction settings of PET filament and I want to print one piece from one bottle. Surely I want to make it fly too hopefully.

• 
  @obregr22 күн бұрын

  @@M.SKhan123 interesting as far as i kno you are first trat you use bottle filement as far ,as i avaremotgers are using pla ot loght pla

• 
  @carolinamariaduquemejia698118 күн бұрын

  Ccam you share with me the setting that you use it​@@M.SKhan123

• 
  @khanbaba36523 күн бұрын

  🎉❤🎉🎉

• 
  @isafrah28 күн бұрын

  i want buy this machine. is it possible. Please answer me

• 
  @M.SKhan12328 күн бұрын

  You can print it by Yourself all files are free on Thingiverse and printables and tutorials are on my KZread channel. Any help you require I will be there .

• 
  @TheFailman6928 күн бұрын

  yay

• 
  @soryn4volt955Ай бұрын

  .STL files ?

• 
  @M.SKhan123Ай бұрын

  kzread.info/dash/bejne/ZJWX0Zhxc83Mfqg.html link for files in description

• 
  @vmunt-diy70Ай бұрын

  Very good quality, Muhammad! Can you tell me how the wing parts will be joined? On the upper edges of the wings I didn't see any places for dowels or protruding consoles. I didn't see eigther any control placements for wing ailerons. Of course, you can keep the intrigue if you will made a video with assembling this flying model later on your channel.

• 
  @M.SKhan123Ай бұрын

  I will be making a full video soon, showing how I will be creating the project from start to finish..

• 
  @ezepolpizza5609Ай бұрын

  podrias desirme que valores trabajas en temperatura velosidad, y si deves poner tiras de filamento manual mente o tienes una manera para unificar los trozos de filamento pet

• 
  @M.SKhan123Ай бұрын

  La mejor temperatura es de 255 a 260 grados y recomiendo cuando se acabe el filamento pausar la impresión y cargar uno nuevo.

• 
  @lantonicorporationАй бұрын

  What printer?

• 
  @M.SKhan123Ай бұрын

  I made it myself it is CoreXY .

• 
  @vmunt-diy70Ай бұрын

  It looks like the gear on the motor shaft is feeling yourself badly, and wants to be reprinted.

• 
  @M.SKhan123Ай бұрын

  It had an incident where filament came in between two gears

• 
  @vmunt-diy70Ай бұрын

  @@M.SKhan123 ​Oh, I see, Muhammad, but this situation takes me second thought: 1st (this thought visits me earlier): as I see, the gear is damaged exactly by layers. Looks like this is a problem of weak melting of the layers. I think that, of course, you will solve this problem in the next, repaired, gear. And 2nd: it looks like it would be nice to print some kind of protection for the exposed gears, at least in the shape of a sparse mesh. Otherwise, it won’t be good if, instead of the filament, one of the beautiful fingers of your beloved woman gets into these gears, or the curious nose of the son of your guests, who will be admired by the beauty of your mechanisms, and wants to touch them with his own hands.