Welcome to Moment of Zed, the KZread channel dedicated to the most beautiful car in the world, the BMW Z3! Follow me (Mark) and my new to me Z3 "New Blue" for tips, product tests and community built around this amazing car.
Thanks for the great video. My problem is that the rod does not move and I scared to break something. Is there any lubricant that would help this?
@PB20055918 сағат бұрын
Excellent. Good work around with hose replacement.
@MomentofZed16 сағат бұрын
@PB200559 thanks and thanks for watching!
@MomentofZed16 сағат бұрын
@PB200559 thanks and thanks for watching!
@MomentofZed16 сағат бұрын
@PB200559 thanks and thanks for watching!
@au1639Күн бұрын
Excellent video!!! There are space on top (aft) of the sealing frame and the bottom(forward) of the sealing frame. Do you happen to know which side may be causing it? May be both? The bottom (forward) side is easy to caulk with a sealant, because of the open access. But the top (aft)side has very narrow space and it difficult to caulk. Your idea of using the gorilla glue with a tube may be a good idea.
@MomentofZedКүн бұрын
@au1639 thank you! I'd say both, it's cracked so when water gets on it, it flows through the crack
@stillno1Күн бұрын
What a stunning improvement! I've been wanting to do this for a while now, and my lights have deteriorated to the point that is "now time." Since I don't have an enclosed garage, and don't have to drive my Z every day, I'll probably remove to entire light assemblies and do much of the work in the air conditioned comfort of my "hobby room." This video has surely inspired me to take the leap! Thx Mark!
@MomentofZedКүн бұрын
@stillno1 I thought about pulling mine off, but got lazy. Good luck!
@PetersdartsКүн бұрын
Great job
@brianloeschsr82092 күн бұрын
Rainy season in Florida. My Z has always been garaged and i don't ever recall driving in the rain (I've had it just 3 years), so yesterday i let it sit in a downpour and.... yup, trunk filled with water😢. Pulled the flexible grommet and sure enough the sealing frame is cracked in about the same place as yours. Will use your fix over the 4th and see how i do. I'll try and report back after the repair and another real-world test!
@MomentofZed2 күн бұрын
Sorry! Tell us how it goes.
@brianloeschsr82092 күн бұрын
Hi Mark, always anticipate your videos - informative AND educational! You must be a teacher (I think I remember you saying you use the Z as your daily drive to school!). I saw this video when it first posted and meant to say thanks for featuring my car at 3:09, thank you! Keep up the good work!
@MomentofZed2 күн бұрын
Thanks and I am a teacher in real life and the Z3 spends its days in the school parking lot.
@htroberts2 күн бұрын
does your condensate drip onto something hot so you hear it sizzling when you stop? (those drains look fairly clear of everything else--makes me wonder if mine are clogged)
@MomentofZed2 күн бұрын
No mine drips to th ground with no sizzling as far as I know.
@19nexx3 күн бұрын
Indeed!!!! 😂
@carabasi3 күн бұрын
Hi Mark, good job and great result.
@MomentofZed3 күн бұрын
Thanks and thanks for watching!
@Yorkshireghostguy3 күн бұрын
Great video…..I actually tried doing this myself last summer and had to get a local guy to rectify it 🤦♂️ Next time I’ll follow your guide….cheers 😎
@MomentofZed3 күн бұрын
Thanks! Sorry it didn't go well for you!
@thomasz3coupe5913 күн бұрын
Hello again , thanks for another well done video. I did the same job two years ago and the result was very good. Used a complete set from a german manufacturer Dupli. The most important hint is to take your time to prevent the surface from overheating.
@MomentofZed3 күн бұрын
Absolutely! If you burn it, you've got problems.
@Nico-pb9lq4 күн бұрын
Great job 👍
@tubepoor4 күн бұрын
Looks great Mark, it doesn’t appear you went through any of the painters tape layers. I know when I did mine I did a layer of painters tape, then a layer of 4 mil aluminum duct tape, then another layer of blue tape just to be extra cautious. Cheers!
@MomentofZed4 күн бұрын
Even better!
@PB2005594 күн бұрын
Clearly improved 🤣
@MomentofZed4 күн бұрын
😄
@kaikad97704 күн бұрын
The X8R is fantastic for those who live in the UK. Not saying about the bushes now but the another common fault which are the mirrors. You can’t get housing from BMW unless you buy the whole mirror. They develop the improved part that won’t fail and you can fit right in and get your wing mirror done👌🏻
@gilbertbrin16044 күн бұрын
Merci pour votre information
@MomentofZed4 күн бұрын
Merci for watching!
@CoolcatsAlley4 күн бұрын
Nice job! Not bad for your first time. You learned a lot with mistakes you made with removing the tint. You Headlights look great now. I do headlights for a living as well and I still learn new things since headlights come in so many shapes and sizes. Polish the headlights once a year with a UV plastic polish and the clear coat can last you a few years. I've seen some last 7 years when properly maintained and stored in a garage.
@MomentofZed4 күн бұрын
Thanks! I hope business goes well for you!
@MicrobyteAlan4 күн бұрын
Looks great 👍thx 👋
@CoolcatsAlley4 күн бұрын
The meguiar's clear coat is very easy to remove since it's designed for headlights. The 2K clear coat Chris Fix recommends is the improper type to use on headlights. It cracks, peels and is extremely difficult to remove.
@MomentofZed4 күн бұрын
Good to know! Sorry I didn't credit you sooner!
@CoolcatsAlley4 күн бұрын
@@MomentofZed you're totally fine. I appreciate you mentioning me.
@walterreil40014 күн бұрын
Another excellent video! Thank you for sharing your fun. Note: Has your audio recording equipment changed? I am hearing some crackling at times, kind of like overload. 🙂
@MomentofZed4 күн бұрын
Yep, but that will be fixed soon!
@jimmyk63364 күн бұрын
Looks good: Now all that's needed is some icing on the cake, led bulbs. I replaced the high, low and fog lights, what a huge difference...
@KadenBarriga4 күн бұрын
Do NOT replace halogen bulbs with LED bulbs unless you change the housings. The reflector housings are not designed to reflect the scatter pattern of an LED and will be more dangerous. You need to retrofit or replace with headlight units that have projector housings.
@thomasz3coupe5913 күн бұрын
In Germany the regular technical inspection would get a heart attack. It's strictly forbidden to exchange bulbs by LEDs.
@jimmyk63363 күн бұрын
@@KadenBarriga I changed mine out to led's like 3 years ago and so far I haven't hit a tree, building or anything else but the road. BTW there was a time when halogen headlights were illegal in the United States, a far contrast to what any new car's sport today...
@jimmyk63363 күн бұрын
@@thomasz3coupe591I live in the U.S. and don't plan on driving my Z3 to Germany anytime soon, heart attack averted...
@KadenBarriga3 күн бұрын
@@jimmyk6336 didn’t know I needed to be more clear. Not a direct danger necessarily to the driver in the car, but to other drivers on the road who you risk blinding with the reflector housing incorrectly reflecting the light scatter pattern of the LED.
@bartoszuczak57304 күн бұрын
LOLZ I just did it 2 weeks ago. I used Visabella kit for clearing leses but do not apply their protection. Use the wipes from Turtle Wax set instead :)
@MomentofZed4 күн бұрын
Hope it turned out nice!
@bartoszuczak57304 күн бұрын
@@MomentofZed they look like new. I also took them off for the whole operation as it can get messy
@melissadavis21087 күн бұрын
Are you supposed the filter and gasket ?
@MomentofZed7 күн бұрын
Do you have an automatic?
@melissadavis21087 күн бұрын
@@MomentofZed yes, Mines a 2000 z3 2.8. I wish mine was a standard but what can you do lol
@melissadavis21087 күн бұрын
I meant change those things by the way
@MomentofZed7 күн бұрын
@melissadavis2108 if its a manual you don't have those. You have the automatic?
@melissadavis21087 күн бұрын
@@MomentofZed yes it's automatic
@melissadavis21088 күн бұрын
The person i got mine from said he "left the door open" so it blows cold air even if its turned off. How do i fix this? Any tips
@MomentofZed8 күн бұрын
Do you mean the temperature control?
@melissadavis21088 күн бұрын
@@MomentofZed yes on the temp control I will have it turned off and it will still blow cold air. You can hear the fan on at all times.
@melissadavis21088 күн бұрын
Mine will probably nickel and dime me to death too but I'm not giving up 😅
@MomentofZed8 күн бұрын
That's what older cars do!
@seragaenglandjewellery95158 күн бұрын
Maybe I misunderstood what you mean by brass rod, but you don’t have to touch anything brass coloured. There’s a tab adjacent to the inside of the door very close to the handle that you just push with a tool such as an Allen Key. It’s wider so easier to push with - hope this helps someone
@MomentofZed8 күн бұрын
Thank you! If I had the endoscope back then, it would have been clearer .
@mikaylahopwood886910 күн бұрын
Looking to get a z3. It’s now my dream car!! My goal is to have one by the end of the year!!!!
@MomentofZed10 күн бұрын
Good luck! Take a look at my video top 10 problems first
@vonbrewsky801911 күн бұрын
6 cross country trips on the base seats!! I've had about 1.5 cross country trips in mine. Hard unsupportive, uncomfortable seats for long road trips. What a steel spined champ!
@MomentofZed11 күн бұрын
Even the sport seats feel like riding a horse after 8 or 9 hours
@brandonochoaluna323312 күн бұрын
Thank you so much for show how to clear the airbag light!
@MomentofZed11 күн бұрын
My pleasure! Thanks for watching!
@Matt_Slidzz12 күн бұрын
Hello, Im looking into getting a z3, Actually looked at one today. I noticed that the top has been replaced and behind the windows where the B piller would be you could actually stick you finger into the cabin through there. I did some research and all I could find is One Ebay listing for a little trim piece that goes there. Is this the correct fix? Or Is there something im missing? Would greatly appreciate some input!
@MomentofZed12 күн бұрын
Can you take pic and email it to [email protected]? I'm on vacation in Costa Rica so it may take some time to respond.
@jimmyk633613 күн бұрын
When you say sideways did you break the back tires loose? Happy Father's Day, celebrated 365 days a year...
@theresapetrick204214 күн бұрын
With New Blue gone we can tell the lawns looking great!!
@MomentofZed14 күн бұрын
Thanks! Peak summer green!
@PB20055915 күн бұрын
Great improvement, and tutorial
@MomentofZed15 күн бұрын
Thanks and thanks for watching!
@paulpetrick29718 күн бұрын
Happy Father's Day bro!!
@MomentofZed18 күн бұрын
You too! Enjoy your day!
@caffeineman518 күн бұрын
I got ahead of myself and that crap cooked so quick into my car even the carwash wouldn't take it off
@MomentofZed18 күн бұрын
Sorry to hear that. It has been ok to use, but not particularly better than similar cheaper products.
@MicrobyteAlan18 күн бұрын
good interesting episode, looking forward to what's up
@MomentofZed18 күн бұрын
Thank you!
@thomasz3coupe59118 күн бұрын
You really make my Sunday evenings!
@thomasz3coupe59118 күн бұрын
Thank you and thumbs up! It's always a pleasure to watch your presentation of Z3s from all around the world and the stories of the cars and their owners.
@MomentofZed18 күн бұрын
Thank you! Appreciate it!
@walterreil400118 күн бұрын
Another very enjoyable video! Thank You! And Happy Father's Day to you too. Hummm - I like your hint at possibly displaying Z's that are for sale! That would be a marvelous support service. Here is another supportive idea to consider --- I happen to live in a "middle of nowhere" area for Z3 visibility, but also marvelous for two-lane highway drives in wine country, halfway between San Francisco and Los Angeles, in a rural area 20 minutes from the Pacific Coast in Atascadero, along Hwy 101. There are no car clubs to belong to or connect with locally. So, it might be a cool service for you to offer some way for Z3 drivers to identify what communities they live in who are interested in getting together for Z drives or get togethers (lunch, etc), and some way to communicate with one another. In today's Zed of the Week, you mentioned someone in the Ventura, CA, area, which piqued my interest, as I could easily meet someone down there for a day trip for a get together. Just a thought. Attempting to "Think Outside the Z"! Again, Happy Father's Day. 😃
@MomentofZed18 күн бұрын
Thank you, Walter! Appreciate the suggestion and I will look into how that would work.
@RSTI19118 күн бұрын
Buddy, you had me at hello.. Great video, thnx for the post. You sold me, I'm 62, that looks like the car for me..
@MomentofZed18 күн бұрын
Thanks and thanks for watching!
@RSTI19118 күн бұрын
@@MomentofZed Kids today just don't get it. Every other word is "like", like you know what I mean like? haha OLD GUYS RULE!! Going to look at one later today. 2000, 2.5. Impala brown.. They should give you a commission if I buy it =)
@MomentofZed18 күн бұрын
@RSTI191 good luck! Send it in for zed of the week if you buy it. There is one featured in today's video btw.
@RSTI19118 күн бұрын
@@MomentofZed 10-4 thnx
@RSTI19117 күн бұрын
@@MomentofZed Hello, test drove 2001 Z 2.5 yesterday. Seller was trying to tell me the car has an M Performance Package. I can't find anything online to justify it. It does have wider rear wheels, however they could be after market. Whatever input you can give would be great, The car is here- CARFAX North Hollywood, dark green asking $7,691 The handles great! But I smell a rat Thnx much John
@jimmiller-vl4fk18 күн бұрын
Thanks for the video
@MomentofZed18 күн бұрын
My pleasure and thank you for watching!
@USAFRETCMSGT18 күн бұрын
It was great seeing my scooter on Moment of Zed. You have a really good channel and I follow it faithfully. Keep up the Zed of the week. It's great to see the various models and colors. Your tech tips and instructional videos are top notch.
@MomentofZed18 күн бұрын
Thanks for submitting! Appreciate the kind words!
@deanhedin161520 күн бұрын
Davico CAT on Merkur Scorpio - Same issue.
@MomentofZed20 күн бұрын
Just the fact that you have a Merkur is cool. Sorry about the cat!
@deanhedin161519 күн бұрын
Should I ever run into having change a CAT again, I will purchase a quality universal CAT and TIG weld it in myself.
@MomentofZed19 күн бұрын
@deanhedin1615 if you can you should, definitely!
@pekkajukkasson426021 күн бұрын
Oh man, Mark. You have the funniest thumbnails on KZread! Usually the perfect mix of word play/dad jokes, but in this case totally over the top 😂 Please never tone down your thumbnails/intros! Great vid as always, I will do this fix to a Z3 in the family!
@MomentofZed20 күн бұрын
Thank you so much! Hey, make sure you disconnect the battery prior to disconnecting the seats. After you remove the mounting bolts, of course
@mikeholland103121 күн бұрын
Stupid vid
@toddslothower626521 күн бұрын
Not exactly a 5 minute job. It took me about 30 minutes total. I was kind of disappointed in the fit of one of the gaskets. Maybe it will sit down after some time. I might email the company about it. Good video though, and an easy job. Thanks!
@MomentofZed21 күн бұрын
Sorry to hear that. That's the first time anyone's mentioned it. Been awhile since I made this. If it's an Amazon link, the return is easy, at least. I'm sure you don't want to dismantle it again though.
@toddslothower626522 күн бұрын
Great. Now I have “clean differential cover “ envy!!!!
@MomentofZed22 күн бұрын
Yeah, mine was crusty prior to changing it as well.
@toddslothower626522 күн бұрын
I want to thank you for this video and product selections. I just did this project yesterday using the suggested pump. Easy peasy!! Thanks again. Your videos are very very helpful.
@MomentofZed22 күн бұрын
Glad to help! Thank you for the kind words and for watching!
@ernanimontezon-pb5xj23 күн бұрын
hi, what is the price value of 1999 z3 right now?
@MomentofZed14 күн бұрын
Please excuse the delay; I'd need to know which engine, transmission, options, mileage, condition, etc. to even guess. Also where are you- that makes a difference. A basic 1.9 liter automatic in poor condition with tons of miles might be $3k. A pristine "M" Roadster with low miles could easily be $25K.
Пікірлер
Thanks for the great video. My problem is that the rod does not move and I scared to break something. Is there any lubricant that would help this?
Excellent. Good work around with hose replacement.
@PB200559 thanks and thanks for watching!
@PB200559 thanks and thanks for watching!
@PB200559 thanks and thanks for watching!
Excellent video!!! There are space on top (aft) of the sealing frame and the bottom(forward) of the sealing frame. Do you happen to know which side may be causing it? May be both? The bottom (forward) side is easy to caulk with a sealant, because of the open access. But the top (aft)side has very narrow space and it difficult to caulk. Your idea of using the gorilla glue with a tube may be a good idea.
@au1639 thank you! I'd say both, it's cracked so when water gets on it, it flows through the crack
What a stunning improvement! I've been wanting to do this for a while now, and my lights have deteriorated to the point that is "now time." Since I don't have an enclosed garage, and don't have to drive my Z every day, I'll probably remove to entire light assemblies and do much of the work in the air conditioned comfort of my "hobby room." This video has surely inspired me to take the leap! Thx Mark!
@stillno1 I thought about pulling mine off, but got lazy. Good luck!
Great job
Rainy season in Florida. My Z has always been garaged and i don't ever recall driving in the rain (I've had it just 3 years), so yesterday i let it sit in a downpour and.... yup, trunk filled with water😢. Pulled the flexible grommet and sure enough the sealing frame is cracked in about the same place as yours. Will use your fix over the 4th and see how i do. I'll try and report back after the repair and another real-world test!
Sorry! Tell us how it goes.
Hi Mark, always anticipate your videos - informative AND educational! You must be a teacher (I think I remember you saying you use the Z as your daily drive to school!). I saw this video when it first posted and meant to say thanks for featuring my car at 3:09, thank you! Keep up the good work!
Thanks and I am a teacher in real life and the Z3 spends its days in the school parking lot.
does your condensate drip onto something hot so you hear it sizzling when you stop? (those drains look fairly clear of everything else--makes me wonder if mine are clogged)
No mine drips to th ground with no sizzling as far as I know.
Indeed!!!! 😂
Hi Mark, good job and great result.
Thanks and thanks for watching!
Great video…..I actually tried doing this myself last summer and had to get a local guy to rectify it 🤦♂️ Next time I’ll follow your guide….cheers 😎
Thanks! Sorry it didn't go well for you!
Hello again , thanks for another well done video. I did the same job two years ago and the result was very good. Used a complete set from a german manufacturer Dupli. The most important hint is to take your time to prevent the surface from overheating.
Absolutely! If you burn it, you've got problems.
Great job 👍
Looks great Mark, it doesn’t appear you went through any of the painters tape layers. I know when I did mine I did a layer of painters tape, then a layer of 4 mil aluminum duct tape, then another layer of blue tape just to be extra cautious. Cheers!
Even better!
Clearly improved 🤣
😄
The X8R is fantastic for those who live in the UK. Not saying about the bushes now but the another common fault which are the mirrors. You can’t get housing from BMW unless you buy the whole mirror. They develop the improved part that won’t fail and you can fit right in and get your wing mirror done👌🏻
Merci pour votre information
Merci for watching!
Nice job! Not bad for your first time. You learned a lot with mistakes you made with removing the tint. You Headlights look great now. I do headlights for a living as well and I still learn new things since headlights come in so many shapes and sizes. Polish the headlights once a year with a UV plastic polish and the clear coat can last you a few years. I've seen some last 7 years when properly maintained and stored in a garage.
Thanks! I hope business goes well for you!
Looks great 👍thx 👋
The meguiar's clear coat is very easy to remove since it's designed for headlights. The 2K clear coat Chris Fix recommends is the improper type to use on headlights. It cracks, peels and is extremely difficult to remove.
Good to know! Sorry I didn't credit you sooner!
@@MomentofZed you're totally fine. I appreciate you mentioning me.
Another excellent video! Thank you for sharing your fun. Note: Has your audio recording equipment changed? I am hearing some crackling at times, kind of like overload. 🙂
Yep, but that will be fixed soon!
Looks good: Now all that's needed is some icing on the cake, led bulbs. I replaced the high, low and fog lights, what a huge difference...
Do NOT replace halogen bulbs with LED bulbs unless you change the housings. The reflector housings are not designed to reflect the scatter pattern of an LED and will be more dangerous. You need to retrofit or replace with headlight units that have projector housings.
In Germany the regular technical inspection would get a heart attack. It's strictly forbidden to exchange bulbs by LEDs.
@@KadenBarriga I changed mine out to led's like 3 years ago and so far I haven't hit a tree, building or anything else but the road. BTW there was a time when halogen headlights were illegal in the United States, a far contrast to what any new car's sport today...
@@thomasz3coupe591I live in the U.S. and don't plan on driving my Z3 to Germany anytime soon, heart attack averted...
@@jimmyk6336 didn’t know I needed to be more clear. Not a direct danger necessarily to the driver in the car, but to other drivers on the road who you risk blinding with the reflector housing incorrectly reflecting the light scatter pattern of the LED.
LOLZ I just did it 2 weeks ago. I used Visabella kit for clearing leses but do not apply their protection. Use the wipes from Turtle Wax set instead :)
Hope it turned out nice!
@@MomentofZed they look like new. I also took them off for the whole operation as it can get messy
Are you supposed the filter and gasket ?
Do you have an automatic?
@@MomentofZed yes, Mines a 2000 z3 2.8. I wish mine was a standard but what can you do lol
I meant change those things by the way
@melissadavis2108 if its a manual you don't have those. You have the automatic?
@@MomentofZed yes it's automatic
The person i got mine from said he "left the door open" so it blows cold air even if its turned off. How do i fix this? Any tips
Do you mean the temperature control?
@@MomentofZed yes on the temp control I will have it turned off and it will still blow cold air. You can hear the fan on at all times.
Mine will probably nickel and dime me to death too but I'm not giving up 😅
That's what older cars do!
Maybe I misunderstood what you mean by brass rod, but you don’t have to touch anything brass coloured. There’s a tab adjacent to the inside of the door very close to the handle that you just push with a tool such as an Allen Key. It’s wider so easier to push with - hope this helps someone
Thank you! If I had the endoscope back then, it would have been clearer .
Looking to get a z3. It’s now my dream car!! My goal is to have one by the end of the year!!!!
Good luck! Take a look at my video top 10 problems first
6 cross country trips on the base seats!! I've had about 1.5 cross country trips in mine. Hard unsupportive, uncomfortable seats for long road trips. What a steel spined champ!
Even the sport seats feel like riding a horse after 8 or 9 hours
Thank you so much for show how to clear the airbag light!
My pleasure! Thanks for watching!
Hello, Im looking into getting a z3, Actually looked at one today. I noticed that the top has been replaced and behind the windows where the B piller would be you could actually stick you finger into the cabin through there. I did some research and all I could find is One Ebay listing for a little trim piece that goes there. Is this the correct fix? Or Is there something im missing? Would greatly appreciate some input!
Can you take pic and email it to [email protected]? I'm on vacation in Costa Rica so it may take some time to respond.
When you say sideways did you break the back tires loose? Happy Father's Day, celebrated 365 days a year...
With New Blue gone we can tell the lawns looking great!!
Thanks! Peak summer green!
Great improvement, and tutorial
Thanks and thanks for watching!
Happy Father's Day bro!!
You too! Enjoy your day!
I got ahead of myself and that crap cooked so quick into my car even the carwash wouldn't take it off
Sorry to hear that. It has been ok to use, but not particularly better than similar cheaper products.
good interesting episode, looking forward to what's up
Thank you!
You really make my Sunday evenings!
Thank you and thumbs up! It's always a pleasure to watch your presentation of Z3s from all around the world and the stories of the cars and their owners.
Thank you! Appreciate it!
Another very enjoyable video! Thank You! And Happy Father's Day to you too. Hummm - I like your hint at possibly displaying Z's that are for sale! That would be a marvelous support service. Here is another supportive idea to consider --- I happen to live in a "middle of nowhere" area for Z3 visibility, but also marvelous for two-lane highway drives in wine country, halfway between San Francisco and Los Angeles, in a rural area 20 minutes from the Pacific Coast in Atascadero, along Hwy 101. There are no car clubs to belong to or connect with locally. So, it might be a cool service for you to offer some way for Z3 drivers to identify what communities they live in who are interested in getting together for Z drives or get togethers (lunch, etc), and some way to communicate with one another. In today's Zed of the Week, you mentioned someone in the Ventura, CA, area, which piqued my interest, as I could easily meet someone down there for a day trip for a get together. Just a thought. Attempting to "Think Outside the Z"! Again, Happy Father's Day. 😃
Thank you, Walter! Appreciate the suggestion and I will look into how that would work.
Buddy, you had me at hello.. Great video, thnx for the post. You sold me, I'm 62, that looks like the car for me..
Thanks and thanks for watching!
@@MomentofZed Kids today just don't get it. Every other word is "like", like you know what I mean like? haha OLD GUYS RULE!! Going to look at one later today. 2000, 2.5. Impala brown.. They should give you a commission if I buy it =)
@RSTI191 good luck! Send it in for zed of the week if you buy it. There is one featured in today's video btw.
@@MomentofZed 10-4 thnx
@@MomentofZed Hello, test drove 2001 Z 2.5 yesterday. Seller was trying to tell me the car has an M Performance Package. I can't find anything online to justify it. It does have wider rear wheels, however they could be after market. Whatever input you can give would be great, The car is here- CARFAX North Hollywood, dark green asking $7,691 The handles great! But I smell a rat Thnx much John
Thanks for the video
My pleasure and thank you for watching!
It was great seeing my scooter on Moment of Zed. You have a really good channel and I follow it faithfully. Keep up the Zed of the week. It's great to see the various models and colors. Your tech tips and instructional videos are top notch.
Thanks for submitting! Appreciate the kind words!
Davico CAT on Merkur Scorpio - Same issue.
Just the fact that you have a Merkur is cool. Sorry about the cat!
Should I ever run into having change a CAT again, I will purchase a quality universal CAT and TIG weld it in myself.
@deanhedin1615 if you can you should, definitely!
Oh man, Mark. You have the funniest thumbnails on KZread! Usually the perfect mix of word play/dad jokes, but in this case totally over the top 😂 Please never tone down your thumbnails/intros! Great vid as always, I will do this fix to a Z3 in the family!
Thank you so much! Hey, make sure you disconnect the battery prior to disconnecting the seats. After you remove the mounting bolts, of course
Stupid vid
Not exactly a 5 minute job. It took me about 30 minutes total. I was kind of disappointed in the fit of one of the gaskets. Maybe it will sit down after some time. I might email the company about it. Good video though, and an easy job. Thanks!
Sorry to hear that. That's the first time anyone's mentioned it. Been awhile since I made this. If it's an Amazon link, the return is easy, at least. I'm sure you don't want to dismantle it again though.
Great. Now I have “clean differential cover “ envy!!!!
Yeah, mine was crusty prior to changing it as well.
I want to thank you for this video and product selections. I just did this project yesterday using the suggested pump. Easy peasy!! Thanks again. Your videos are very very helpful.
Glad to help! Thank you for the kind words and for watching!
hi, what is the price value of 1999 z3 right now?
Please excuse the delay; I'd need to know which engine, transmission, options, mileage, condition, etc. to even guess. Also where are you- that makes a difference. A basic 1.9 liter automatic in poor condition with tons of miles might be $3k. A pristine "M" Roadster with low miles could easily be $25K.