Пікірлер

• 
  @JerryHerman-g7i42 минут бұрын

  You not gonna grease them wheel bearings before you replace them seals?

• 
  @BradenBuildz19 минут бұрын

  They aren’t supposed to be greased. The gear oil in transaxle is what lubricates them.

• 
  @JerryHerman-g7i13 минут бұрын

  Thanks, that’s good info to know.

• 
  @TruthIsNotTemporary3 сағат бұрын

  Where did all the water come from in the transaxle ?

• 
  @olddadyoungheart70525 сағат бұрын

  A young Andrew Camarata in the making...

• 
  @olddadyoungheart70525 сағат бұрын

  Invest in an electric winch on your trailer!!!

• 
  @brandonfrazier102611 сағат бұрын

  Great video im new to the channel and your getting a new subscriber

• 
  @Jumpnjacksdaddy14 сағат бұрын

  Got gas Boy 😂😂😂

• 
  @eddie_gur2315 сағат бұрын

  Have to say I like watching ur videos far play ta ya 😊

• 
  @Zach_MillerКүн бұрын

  Absolute BS to host an auction and put reserves on everything.. It's the auctioneer's own fault for poor turnout and bids, they have all the time in the world to advertise

• 
  @BenjaminDuSagКүн бұрын

  Salut mon Steel! Dire que je te suis depuis environs tes 10k, et je t’ai vu évoluer et par le fait même moi aussi,(je t’écoutais dans ma chambre comme un hermite, et aujourd’hui, j’ai fait l’achat de ma première maison et je suis toujours à l’écoute 😂) je t’écoutais jouer dans ta petite salle avec un rideau noir et ton casque Razer, (parfois avec les lunettes d’aviateur 😂). Je trouves que ton contenu est rendu infiniment meilleur, surtout avec le tracteur et tout, mais cette vidéo là est next step, j’avais le feeling de jaser avec toi 😂. Tout ça pour dire lâche pas le contenu est parfait. Et tu sembles être un très bon père.🤟🏻

• 
  @terrycastor8299Күн бұрын

  Very interesting video. I considered one of those old Kubota tractors, but the small size made me a bit hesitant. It looks a bit unstable especially in a slope, which I have a lot. Great rejuvenation of a classic. Great job!

• 
  @richardsloane7983Күн бұрын

  It's a good feeling to see young people having interest in old machinery and repairing them, you have a great future ahead of you

• 
  @Uriahheep1975Күн бұрын

  You reminded me of Matt of Diesel Creek when he start his youtube.

• 
  @chuckriggsjr.60212 күн бұрын

  Just started watching your channel. Pretty awesome. Might want to use safety stands under ur bucket when it's raised n ur under it. I learned these lessons through my life. Ur young n a long way to go. No sense of getting hurt. But great videos. Keep up the great job. Good to see younger generations gettin stuff dun n gettin dirty. Be safe.

• 
  @johnnybegood62282 күн бұрын

  Always repack your bearings with grease, you can do it old school, Or you can buy a bearing buddy, Rotation Hand Bearing Packer Tool, Inject Bearing Grease into Bearing, I like old school the best you can see all the grease going to all the parts of the bearing. And watch all the old grease coming out! Always run your wires close to the frame, that way you want rip them out. Other than that, I thank you done a great job! Keep up the good work

• 
  @lwwarren2 күн бұрын

  Great job but you're putting too much tension on those wire joints and not enough support on the wires. They'll pull free or break after enough time and road vibration.

• 
  @jOHNJEFF-q2d3 күн бұрын

  Great video, how did you get such a smooth paint job, i saw the grinding of the old paint but when i grinding my trailer, the old paint was still their and the paint came out bumpy.

• 
  @thomasbradley48683 күн бұрын

  Where is your safety glasses and mask my brother at the age 27 lost his eyes spray paint !

• 
  @user-qt7bs2qr8f3 күн бұрын

  I have a project car that’s sezied idk if that’s the same a locked but if I sling the crank pulley will it b unseised.

• 
  @BradenBuildz3 күн бұрын

  Don’t do it the way I did it. I unlocked mine like this because I saw signs that it had been over heated and it would need rebuilt anyways. If it’s locked from sitting out some marvel mystery oil or atf innit and let it sit awhile. Then start moving it back and forth slowly and try to work it free

• 
  @shopdoc3 күн бұрын

  I really enjoyed that!

• 
  @rosbelmendiola45684 күн бұрын

  I'm a new subscriber hope to see much more of this kind of videos

• 
  @michaelwhite61104 күн бұрын

  I bought a 610 like this and did the same thing. best investment ever! I love it

• 
  @stevenmoore25144 күн бұрын

  It would have been a good idea to put some lube in the cylinders before all that cranking.

• 
  @BradenBuildz4 күн бұрын

  Yes but not as bad as you think. Oil pressure builds while cranking not just by running. The only damage done was the first few rotations after that oil pressure should have been up. Damage very minimal and probably unmeasurable.

• 
  @stevenmoore25144 күн бұрын

  @@BradenBuildz You are correct, the damage was done. There is a right way and a wrong way to do things. You made a poor choice.

• 
  @BradenBuildz4 күн бұрын

  I also said damage is most likely immeasurable. Meaning next to none. If you want me to put on a lab vest and some gloves and do everything by the book your on the wrong channel.

• 
  @This0is0pointless4 күн бұрын

  Do you still have this?

• 
  @BradenBuildz4 күн бұрын

  Yep

• 
  @This0is0pointless4 күн бұрын

  @BradenBuildz i would send you a message but I don't think I can on yt, I was wondering if you where interested in selling parts

• 
  @BradenBuildz4 күн бұрын

  @@This0is0pointless $800 for whole thing. If I can’t get that I’m better off making more videos on it

• 
  @This0is0pointless4 күн бұрын

  @BradenBuildz don't blame you, I'll look out for future vids on it, that would be too far of a road trip for me 👌

• 
  @EnGammalAmazon4 күн бұрын

  If you think the B7100 is small, I have 2 B6000 Kubotas with 2 cylinder diesels. One of my friends near me has a B6000 with a front end loader.

• 
  @SereneJukebox-bu7bz4 күн бұрын

  GO TO HARBOR FREIGHT AND GET YOUR TOOLS. THEY WILL REPLACE THEM TAKE BACK IN THE STORE

• 
  @freezerburn044 күн бұрын

  I have a b6100d 4x4 myself. No front pto and no front loader but the 3 point sure is useful:) Great vid , thanks. Freezer’

• 
  @stevedave1065 күн бұрын

  Love that FORD compact diesel in the background.

• 
  @MrStuffdude5 күн бұрын

  "go join your friend" - I felt that.

• 
  @spianydaro19905 күн бұрын

  What was the price for tractor

• 
  @BradenBuildz5 күн бұрын

  I gave $2000 for it and put $1500 in it. But expect to pay more like $5000 and up. Anything below that is a pretty good deal.

• 
  @spianydaro19905 күн бұрын

  What price you pay for that tractor

• 
  @spianydaro19905 күн бұрын

  Did you flush the tank I would put extra fuel filter near tank I wish to have same tractor

• 
  @abbyholland025 күн бұрын

  That’s my watering can fool

• 
  @hunterchartrand66465 күн бұрын

  Be careful when working on old equipment with Dayton style rims like that. If it was made some time in the 50s-70s it may have split rims, which are prone to failure given their old age nowadays, and when they fail they essentially explode and can kill you when you remove them from the hub. The rims are nationally outlawed due to so many people being hurt and killed, and have been properly labeled widow maker rims. The ones you have don't look to be split rims, but its still good knowledge to have

• 
  @dennissarver19635 күн бұрын

  tear it down at least !

• 
  @brianlemke36615 күн бұрын

  Great Job

• 
  @DavoPJR5 күн бұрын

  Been watching this guy for a couple of days now. Interesting, but boy does he do stupid things

• 
  @Jamie-tn5qj5 күн бұрын

  Poor starter

• 
  @bkyardmechanic50106 күн бұрын

  1st change oil, pour mystery oil in cylinders and sit for few says. Last never crank a starter for more than 20 seconds. Lastly yr running to long with no anti freeze

• 
  @lumpy16036 күн бұрын

  "Go join your friend" is so relatable 😂

• 
  @sylviaprudhomme54176 күн бұрын

  Enjoyed that. Determination❤❤❤❤❤

• 
  @johnhensley70276 күн бұрын

  The knowledge and suggestions shared in the comments section have been very valuable to me. Thanks fellas, for your input.

• 
  @jerrys92266 күн бұрын

  I have the same machine, M-610, that I bought new in 1975. Still have it and still running strong. The only thing I’ve done to the engine besides points and spark plugs is head gaskets. Those Wisconsin VH 4D engines are great. I just repainted it and you can still get the original decals for it online.

• 
  @firstname62086 күн бұрын

  that's no bobcat, that's a bobkitty! we had one years ago, scraped the isles in the free stall barn.

• 
  @rw31756 күн бұрын

  Isuzu engine are great as so are the trucks we have them here in south africa

• 
  @TheMyndzs6 күн бұрын

  Little thing is lucky to end up in your hands

• 
  @localcrew7 күн бұрын

  Wisconsin W4-1770 engine with 35 horses of fury. I worked with a guy who had the tiniest of Bobcat skid steer loaders. Powered by an 18hp Kohler twin. He used it for building demolition. They’re also popular for mucking stalls.

• 
  @Lacar2277 күн бұрын

  Put some bolts in the tank and shake it around to loosen up the rust

• 
  @nimakarimi16067 күн бұрын

  Good job boy🎉🎉

• 
  @CourtlandCronnq7 күн бұрын

  Buy a ford they said it will be fun they said well they where going wrong

• 
  @connorferguson99497 күн бұрын

  Let’s see an update video!!