I am retired, decided to start cutting my hair at home to save some money. I know very little on changing blades. Thank you for posting this very informative video. Steve Balistreri
@daryncook5 күн бұрын
Glad to help
@raloraccz142412 күн бұрын
Wassup Daryn Great product you created I have purchase two mods already my andis’s are spittin crack appreciate what you do big dawg..now I have a question do you have a mod for the Babybliss FX3 trimmer blade for the andis corded trimmer ?
@daryncook10 күн бұрын
Hey! I don't have any mod for the fx3 blade. Other than the Vgr 192 trimmer
@kingdevine737415 күн бұрын
So when u do that so u want it flush 0 or slightly under zero
@daryncook10 күн бұрын
Slightly under zero so you don't leave marks
@shaunrichardson2440Ай бұрын
July 24 and still works, you aboslute legend. This has saved me an awful lot of pain with my 2 year old wanting to try every tractor :)
@daryncookАй бұрын
Thanks man!
@BigEasycutzАй бұрын
Will this mod work on the supreme trimmer T shaper?
@daryncookАй бұрын
Yes. It will work with the supreme
@oskarolchowik4532Ай бұрын
From 100 vids this is the only one with farming sim 21😂
@daryncookАй бұрын
Sweet, did it help at all?
@hossamalharbi21162 ай бұрын
I just ordered it 🎉
@daryncook2 ай бұрын
You won't be disappointed! The other 600 weren't!
@witefalcon442 ай бұрын
Can you put and andis t outliner blade on the kemei 2275? And if so, show us pleaseee
@daryncook2 ай бұрын
I don't have anything for that specific model
@julencastelo65592 ай бұрын
Podrías mandar el enlace para comprarlos ?
@daryncook2 ай бұрын
Eliteclippermods.com
@julencastelo65592 ай бұрын
Donde consigo esos corchetes?
@daryncook2 ай бұрын
Eliteclippermods.com
@ItsMe-dk9pl2 ай бұрын
Same here
@DanRangel-js4rz2 ай бұрын
Does the part fist a Tpob Ghost trimmer ?
@daryncook2 ай бұрын
Yes. Same thing
@Pee_cuts2 ай бұрын
Can normal wahl detailer blade comfollower work for this mod
@daryncook2 ай бұрын
No it does not.
@the_original_Versastyles3 ай бұрын
This is wild… before any mods were even out… I saw that this was possible… but I used a mini dremmel and a soddering iron and carefully sculpted the actual plastic that came with the fx3 down to fit the original design babyliss blade. It happened to be the gold fx but the best blade set I ever had until my son dropped it was b.Clarks custom Koncreate cerakote baked graphite 2.0 blade… I am going to try to replicate a cerakote baked H series coated blade baked at 300f for one hour… it should work
@daryncook2 ай бұрын
I'd rather just use the cleanly made saddle then hackjob some ugly stuff together.
@daryncook2 ай бұрын
I made the first mod for the fx3 Dec 2021. It's time stamped on my insta. Then copied of course
@Larkintv3 ай бұрын
Can you tell please What part do you need to put wahl t blade to Renpho? Special Plastic part ?
@daryncook3 ай бұрын
Can follower , it's available on the website Eliteclippermods.com
@oledevon3 ай бұрын
Can the sc x pro blade fit with no mod?
@daryncook3 ай бұрын
No
@tonylepley73663 ай бұрын
Someone unplugged all the connectors, cleaned them and put them back and that fixed the overload issue.
@daryncook2 ай бұрын
I ended up selling the junk for a couple hundred bucks and bought a Honda and haven't had any issues.
@tonylepley73663 ай бұрын
Same issue
@barberchips1224 ай бұрын
Is it worth it because the power is not there
@daryncook4 ай бұрын
Works great for all my customers with zero complaints.
@LipeDucort4 ай бұрын
Queria saber o nome dessa peça preta aí que você trocou ?
@daryncook4 ай бұрын
Eliteclippermods.com babyliss blade mod ONLY available there
@AfonsoBarber4 ай бұрын
Faz envio internacional para o Brasil ou tem link no EBay?
@daryncook4 ай бұрын
I don't sell on eBay. Eliteclippermods.com
@savedonthebeat4 ай бұрын
Where can I purchase that mod saddle?
@daryncook4 ай бұрын
Eliteclippermods.com
@user-ggkkiiyy45444 ай бұрын
What is your best trimmers ?
@daryncook4 ай бұрын
It's a hard choice. I like the GTX exo with the graphite blade that I have.
@user-ggkkiiyy45444 ай бұрын
@@daryncook Yes, this is an excellent trimmer, it would be cool if Andis made it in a standard gray color,
@Biggcityvisions4 ай бұрын
Was there a purpose for removing those two rectangular screws on the blade slide? Did u put them back the same way?
@daryncook4 ай бұрын
If possible. Leave the cutting blade flat on the comb blade so the rectangular screws don't fall out.
@gibbi_arte4 ай бұрын
Onde vc arrumou essa peça dos parafusos pra fazer essa adaptação?
@daryncook4 ай бұрын
Eliteclippermods.com
@elblancobarber81654 ай бұрын
Se escucha algo ruidosa como que no quedaran bien las cuchillas
@daryncook4 ай бұрын
It's the microphone
@moneysignclubboss5 ай бұрын
Can we put in a special request?
@daryncook5 ай бұрын
Send the website a message
@moneysignclubboss5 ай бұрын
@@daryncook THE BARBERS ON KZread WILL GO NUTZ FOR THIS ONE
@moneysignclubboss5 ай бұрын
@@daryncook and I was asking for a video
@daryncook5 ай бұрын
No worries send me a message
@Angelmatos-sr5re5 ай бұрын
Donde consigo la base para colocarle las cuchillas encima
@daryncook5 ай бұрын
Eliteclippermods.com
@ianmelancon34035 ай бұрын
My screws not fitting in the adapter
@daryncook5 ай бұрын
You should probably send them an email. They respond quickly and can get you pointed in the right direction.
@medbal29895 ай бұрын
Still working March 2024- thanks man!!!
@medbal29895 ай бұрын
You can use the D pad
@SRTFYDGaming5 ай бұрын
Where do I get the attachment/mod?
@daryncook5 ай бұрын
Go to eliteclippermods.com and it's in the kemei ect section
@djfraco94985 ай бұрын
hi bro I have a question about a 1949 kemei mower and the Cam Followers is indentic . will be compatible?? thank you
@daryncook5 ай бұрын
Yes it is the same modification. Select that one.
@tdawgdouglas48315 ай бұрын
Can we see that MFer cut?
@daryncook5 ай бұрын
Go look at my insta. Got plenty of people on there slicing with them!
@THBFADEZ015 ай бұрын
Sou do Brasil como faço pra comprar e ser enviado até aqui?
@daryncook5 ай бұрын
Eliteclippermods.com
@eloycruzado98245 ай бұрын
Question.... can you make a MOD to place the Blur Blade on a cordless master ?
@daryncook2 ай бұрын
Not right now.
@kingdevine73746 ай бұрын
Corded t out liners ?
@daryncook5 ай бұрын
I have them available on the website. Eliteclippermods.com
@kingdevine73745 ай бұрын
@@daryncook yeah my bad I saw them right after the message. Have u made one to put the 2.0dlc say (fx blade or stylecraft blade ) on the slime line pro li?
@daryncook5 ай бұрын
No sir I have not
@kingdevine73745 ай бұрын
@@daryncook is that something you think you would consider taking on ? I think it would be cool especially if the motor is strong enough
@eloycruzado98246 ай бұрын
I just got mine fits the lopro fx trimmer perfect and the mod for black skeleton andis gtx exo fx bracket is the best . Thank you going to order more
@daryncook6 ай бұрын
Thank you for the support! Most all of the money goes strait to a special needs baseball team and a children's special Olympics.. your money is going to a good cause
@eloycruzado98246 ай бұрын
@@daryncook question on the special fx blade $58 what is mainly the difference one from Babyliss fx trimmer blade? And in the future when blade needs sharpening professionally will be have to set a particular way? I'm thinking of getting one
@daryncook6 ай бұрын
The babyliss blade is sloppy as heck. My ECM blade is a little tighter and quieter. And lightly sharpened and precision gapped.
@2demtribezelakh6136 ай бұрын
Will the trimmer cut sharper with the mod?
@daryncook6 ай бұрын
Night and day difference
@2demtribezelakh6136 ай бұрын
Thanks will consider it.
@daryncook6 ай бұрын
Thank you for the support
@dgo_f1506 ай бұрын
Would this work for a corded T-liner ?
@daryncook6 ай бұрын
Yes they have one for the corded t outliner on the website eliteclippermods.com
@jamesdean56776 ай бұрын
What does this actually do? Thanks.
@daryncook6 ай бұрын
It adapts the Babyliss Fx. And other FX like blades to the andis
@jamesdean56776 ай бұрын
@@daryncook Got that but does it cut better? I have the Andis T Outliner cordless and I use it to cut the area around my bald spot every day or two since I had SMP done. It stopped cutting correctly after just over a years use and started pulling. I cleaned it up and adjusted the blades but all it will do is cut my beard. I was thinking of going this route but wasn't sure if it cut better or something. For now I am using my 5 year old corded wahl balder but just in case I want to travel I'd like to use the Andis. Thanks!
@daryncook6 ай бұрын
Yeah. Controversy with the andis blade vs the babyliss blade. I think the. Babyliss is a night and day difference .
@brotherofzion6 ай бұрын
Will this work on a skeleton t outliner ?
@daryncook6 ай бұрын
Yes, it will be a direct fit.
@energizer._.3746 ай бұрын
It works thanks
@daryncook6 ай бұрын
Enjoy
@yahshuasaves82926 ай бұрын
What does it do ?? More horse 🐴 power??
@daryncook6 ай бұрын
Better blade
@eduardocisneros93247 ай бұрын
Can you use the psycho blade with the mod?
@daryncook7 ай бұрын
Yes you can
@kingdevine73747 ай бұрын
Have you done a mood to make the style Craft x blade fit yhe Andis slimline pro LI?
Пікірлер
Where are you located
I am retired, decided to start cutting my hair at home to save some money. I know very little on changing blades. Thank you for posting this very informative video. Steve Balistreri
Glad to help
Wassup Daryn Great product you created I have purchase two mods already my andis’s are spittin crack appreciate what you do big dawg..now I have a question do you have a mod for the Babybliss FX3 trimmer blade for the andis corded trimmer ?
Hey! I don't have any mod for the fx3 blade. Other than the Vgr 192 trimmer
So when u do that so u want it flush 0 or slightly under zero
Slightly under zero so you don't leave marks
July 24 and still works, you aboslute legend. This has saved me an awful lot of pain with my 2 year old wanting to try every tractor :)
Thanks man!
Will this mod work on the supreme trimmer T shaper?
Yes. It will work with the supreme
From 100 vids this is the only one with farming sim 21😂
Sweet, did it help at all?
I just ordered it 🎉
You won't be disappointed! The other 600 weren't!
Can you put and andis t outliner blade on the kemei 2275? And if so, show us pleaseee
I don't have anything for that specific model
Podrías mandar el enlace para comprarlos ?
Eliteclippermods.com
Donde consigo esos corchetes?
Eliteclippermods.com
Same here
Does the part fist a Tpob Ghost trimmer ?
Yes. Same thing
Can normal wahl detailer blade comfollower work for this mod
No it does not.
This is wild… before any mods were even out… I saw that this was possible… but I used a mini dremmel and a soddering iron and carefully sculpted the actual plastic that came with the fx3 down to fit the original design babyliss blade. It happened to be the gold fx but the best blade set I ever had until my son dropped it was b.Clarks custom Koncreate cerakote baked graphite 2.0 blade… I am going to try to replicate a cerakote baked H series coated blade baked at 300f for one hour… it should work
I'd rather just use the cleanly made saddle then hackjob some ugly stuff together.
I made the first mod for the fx3 Dec 2021. It's time stamped on my insta. Then copied of course
Can you tell please What part do you need to put wahl t blade to Renpho? Special Plastic part ?
Can follower , it's available on the website Eliteclippermods.com
Can the sc x pro blade fit with no mod?
No
Someone unplugged all the connectors, cleaned them and put them back and that fixed the overload issue.
I ended up selling the junk for a couple hundred bucks and bought a Honda and haven't had any issues.
Same issue
Is it worth it because the power is not there
Works great for all my customers with zero complaints.
Queria saber o nome dessa peça preta aí que você trocou ?
Eliteclippermods.com babyliss blade mod ONLY available there
Faz envio internacional para o Brasil ou tem link no EBay?
I don't sell on eBay. Eliteclippermods.com
Where can I purchase that mod saddle?
Eliteclippermods.com
What is your best trimmers ?
It's a hard choice. I like the GTX exo with the graphite blade that I have.
@@daryncook Yes, this is an excellent trimmer, it would be cool if Andis made it in a standard gray color,
Was there a purpose for removing those two rectangular screws on the blade slide? Did u put them back the same way?
If possible. Leave the cutting blade flat on the comb blade so the rectangular screws don't fall out.
Onde vc arrumou essa peça dos parafusos pra fazer essa adaptação?
Eliteclippermods.com
Se escucha algo ruidosa como que no quedaran bien las cuchillas
It's the microphone
Can we put in a special request?
Send the website a message
@@daryncook THE BARBERS ON KZread WILL GO NUTZ FOR THIS ONE
@@daryncook and I was asking for a video
No worries send me a message
Donde consigo la base para colocarle las cuchillas encima
Eliteclippermods.com
My screws not fitting in the adapter
You should probably send them an email. They respond quickly and can get you pointed in the right direction.
Still working March 2024- thanks man!!!
You can use the D pad
Where do I get the attachment/mod?
Go to eliteclippermods.com and it's in the kemei ect section
hi bro I have a question about a 1949 kemei mower and the Cam Followers is indentic . will be compatible?? thank you
Yes it is the same modification. Select that one.
Can we see that MFer cut?
Go look at my insta. Got plenty of people on there slicing with them!
Sou do Brasil como faço pra comprar e ser enviado até aqui?
Eliteclippermods.com
Question.... can you make a MOD to place the Blur Blade on a cordless master ?
Not right now.
Corded t out liners ?
I have them available on the website. Eliteclippermods.com
@@daryncook yeah my bad I saw them right after the message. Have u made one to put the 2.0dlc say (fx blade or stylecraft blade ) on the slime line pro li?
No sir I have not
@@daryncook is that something you think you would consider taking on ? I think it would be cool especially if the motor is strong enough
I just got mine fits the lopro fx trimmer perfect and the mod for black skeleton andis gtx exo fx bracket is the best . Thank you going to order more
Thank you for the support! Most all of the money goes strait to a special needs baseball team and a children's special Olympics.. your money is going to a good cause
@@daryncook question on the special fx blade $58 what is mainly the difference one from Babyliss fx trimmer blade? And in the future when blade needs sharpening professionally will be have to set a particular way? I'm thinking of getting one
The babyliss blade is sloppy as heck. My ECM blade is a little tighter and quieter. And lightly sharpened and precision gapped.
Will the trimmer cut sharper with the mod?
Night and day difference
Thanks will consider it.
Thank you for the support
Would this work for a corded T-liner ?
Yes they have one for the corded t outliner on the website eliteclippermods.com
What does this actually do? Thanks.
It adapts the Babyliss Fx. And other FX like blades to the andis
@@daryncook Got that but does it cut better? I have the Andis T Outliner cordless and I use it to cut the area around my bald spot every day or two since I had SMP done. It stopped cutting correctly after just over a years use and started pulling. I cleaned it up and adjusted the blades but all it will do is cut my beard. I was thinking of going this route but wasn't sure if it cut better or something. For now I am using my 5 year old corded wahl balder but just in case I want to travel I'd like to use the Andis. Thanks!
Yeah. Controversy with the andis blade vs the babyliss blade. I think the. Babyliss is a night and day difference .
Will this work on a skeleton t outliner ?
Yes, it will be a direct fit.
It works thanks
Enjoy
What does it do ?? More horse 🐴 power??
Better blade
Can you use the psycho blade with the mod?
Yes you can
Have you done a mood to make the style Craft x blade fit yhe Andis slimline pro LI?
No I have not yet
Do you have a contact number or email?
Yeah it's on the website. Eliteclippermods.com
do you have 1 for skeleton cut?
It will fit both normal and skeleton
Still works 2024