////////Please: can you create a video, how to get the part number and the best websites to order parts for furnaces and how to order equivalent part if we can't find the original part? thank you
@jakesmith49579 ай бұрын
Very good video however you didn't verify furnace circuit was deenergized. I find this to be the biggest mistake. Yes, the switch SHOULD cut the power but finding out the hard way is never a good way.
@BlessedBloodline10 ай бұрын
Very true! The smallest things can cause the biggest problems. ✅✅✅ great video man! God Bless!
@Mindset973 Жыл бұрын
I don't mess around with that mess!!! Any wrong move that mess explodes 😬
@BillSW Жыл бұрын
no testing of the blower cap !
@essiemae8043 Жыл бұрын
should we have the unit on or off. I didn't hear you say to turn the furnace switch off
@shakirahmedtth Жыл бұрын
When I open the front cover for vacuuming inside the firnace, there was something like filter attached to that front cover. That filter kind of thing was very dirty and broke. What do we call that one? It is round fiber something. Where to find it. Can we turn on furnace without that? Just closing the front cover? Can I add just something fireproof there like basement wall insulation cut in to round and attach there?
@haieracexpert338 Жыл бұрын
Very good knowledge Sir
@markfreedom87322 жыл бұрын
Good info and what not.
@markfreedom87322 жыл бұрын
Comment
@atsepa2 жыл бұрын
This video just save my landlord a sue
@EnjoyCalculus2 жыл бұрын
Computer board? Bro cmon. Integrated fan control
@jasonvoorhees85452 жыл бұрын
A lot of the new high efficiency Carriers have very difficult to remove flame sensors.
@socialimpact20943 жыл бұрын
Thank you ! Thank you ! Very helpful 👍👍👍
@MyBallzGotShocked3 жыл бұрын
i just want to say thank you for cleaning the flame sensor with an abrasive. ive been told countless times to use non abrasive or "dollar bill" and not one time has an instructor been able to give me a confident or concise answer. i quit using non abrasive the first month of doing service work after the call backs started rolling in. the way i see it is if you verify low current before you clean it verify the micro amps there is no difference to a board. after 10+ years ive only ever replaced a flame sense rod because i broke it.
@zzman53063 жыл бұрын
That filter catches rocks....
@eduardorangel47123 жыл бұрын
Thanks for the video. How about checking the burners how is done?
@DanK1233 жыл бұрын
Thank you What Not.
@MrAllie-bf6zt3 жыл бұрын
Video would have been perfect if the camera man would zoom in to each part he talks about. Can't see anything from that distance.
@GreenGateTV3 жыл бұрын
11.34 Satan?
@eagle18hls3 жыл бұрын
Good tips. My inducer motor is heating up and not spinning freely. Makes a squeaky sound. Where is the maintenance tip for that on a new Lenox Heater?
@pauljoynt13343 жыл бұрын
at 11:35 there is the faint whisper and it does not sound like a human at all you really have to turn up the audio to hear it but its low key creepy. But the video was very informative as well.
@baybocukcu3 жыл бұрын
12:46 Perfect explanation of how it works! Thank you.
@confuzler69854 жыл бұрын
Thank you very much. and what not :)
@2Truth4Liberty4 жыл бұрын
After my blower shuts off, it starts back up in a minute or two and run for another 30-60 seconds. I presume that is because it cools the sensor but the heat exchanger still has quite a bit of heat in it and eventually heats the sensor back up to run the blower some more.
@joemug40794 жыл бұрын
Great
@mega4084 жыл бұрын
Very well done
@sjnichani4 жыл бұрын
good job john
@laylaogolf64514 жыл бұрын
good detail thank
@richardquinn1164 жыл бұрын
right before 9:00. The oils of your fingers on the igniter switch tip will cause tip to crack, furnace not to work and new part needed & installed. that fact should be emphasized for sustainability.
@livincincy44984 жыл бұрын
A home owner should keep a spare flame sensor and an igniter for their furnace. These items are available via the Internet for about 1/10 of what a service company will charge you. You can also purchase the fans for your furnace. Fans last a long time, 10-15-20 years typically. They normally only die when you have house guests during the holidays.
@michaelodonnell23344 жыл бұрын
Thankyou!! At 11:37 I think you have a ghost reaching out!! It says something I can’t make it out lol. No I’m not crazy lol
@mariajara67914 жыл бұрын
Mikey O’Donnell yes!!!
@scottabrams54943 жыл бұрын
I hear it too.
@scottabrams54943 жыл бұрын
Look inside...
@IDVDalot3 жыл бұрын
mamma mia! How fast can you get out of that attick!
@djesquire123 жыл бұрын
Its at 11:35. I definitely hear it.
@crypto_creep82224 жыл бұрын
They wanted 185.00 dollars to do what u just showed us thank u
@groznyentertainment4 жыл бұрын
There is also the humidifier filter
@integrityrules81054 жыл бұрын
This guy must have said "what not" about 150 times in this video.
@MsLincos4 жыл бұрын
Thanks for the video John. Greetings from Holland;-)
@wamiquef51925 жыл бұрын
What-not.
@gnarleyric32895 жыл бұрын
Lol I’m sure you recommend I call a professional :/ like this is rocket science. I’ll find another video
@vjw655 жыл бұрын
The care taker here told me if I hold the filter up to a light bulb and I can see the light it is a good filter [ the filter black as tar not changed for two years, two rays of light shone through.] Can this be right? I took care of my home furnace and this is exactly 180 degrees from what I learned years ago.
@spencerhansen83742 жыл бұрын
Two rays of light isn't "seeing the light", just replace it twice a year minimum and call it good.
@jayjayevans88165 жыл бұрын
I love all the WHAT NOTS!
@jackpowell22075 жыл бұрын
I don't have gas/ oil
@TheGuitaronfire765 жыл бұрын
I agree with other viewers that the cameraman sucks. He is way too far away and you cannot see the details of the Flame sensor or the burners and other things. Get up in that furnace his face. It’s almost like a cameraman couldn’t get close because he had some contagious disease and the HVAC tech didn’t want to get sick.
@klow66285 жыл бұрын
Good video and whatnot
@marcellocfp5 жыл бұрын
Thank you Sir for sharing your knowledge!!!!!!!!!
@theknottyoaktree10175 жыл бұрын
Thank you so much for this you don't know how much of a blessing this was!!!
@emperorsanders57445 жыл бұрын
Cleaned system so half the things you mentioned were not done by you or what not.
@sabertoothcsc90445 жыл бұрын
anyway around not sniffing it lol like soap or something
Пікірлер
You suck!
Красавчик!
////////Please: can you create a video, how to get the part number and the best websites to order parts for furnaces and how to order equivalent part if we can't find the original part? thank you
Very good video however you didn't verify furnace circuit was deenergized. I find this to be the biggest mistake. Yes, the switch SHOULD cut the power but finding out the hard way is never a good way.
Very true! The smallest things can cause the biggest problems. ✅✅✅ great video man! God Bless!
I don't mess around with that mess!!! Any wrong move that mess explodes 😬
no testing of the blower cap !
should we have the unit on or off. I didn't hear you say to turn the furnace switch off
When I open the front cover for vacuuming inside the firnace, there was something like filter attached to that front cover. That filter kind of thing was very dirty and broke. What do we call that one? It is round fiber something. Where to find it. Can we turn on furnace without that? Just closing the front cover? Can I add just something fireproof there like basement wall insulation cut in to round and attach there?
Very good knowledge Sir
Good info and what not.
Comment
This video just save my landlord a sue
Computer board? Bro cmon. Integrated fan control
A lot of the new high efficiency Carriers have very difficult to remove flame sensors.
Thank you ! Thank you ! Very helpful 👍👍👍
i just want to say thank you for cleaning the flame sensor with an abrasive. ive been told countless times to use non abrasive or "dollar bill" and not one time has an instructor been able to give me a confident or concise answer. i quit using non abrasive the first month of doing service work after the call backs started rolling in. the way i see it is if you verify low current before you clean it verify the micro amps there is no difference to a board. after 10+ years ive only ever replaced a flame sense rod because i broke it.
That filter catches rocks....
Thanks for the video. How about checking the burners how is done?
Thank you What Not.
Video would have been perfect if the camera man would zoom in to each part he talks about. Can't see anything from that distance.
11.34 Satan?
Good tips. My inducer motor is heating up and not spinning freely. Makes a squeaky sound. Where is the maintenance tip for that on a new Lenox Heater?
at 11:35 there is the faint whisper and it does not sound like a human at all you really have to turn up the audio to hear it but its low key creepy. But the video was very informative as well.
12:46 Perfect explanation of how it works! Thank you.
Thank you very much. and what not :)
After my blower shuts off, it starts back up in a minute or two and run for another 30-60 seconds. I presume that is because it cools the sensor but the heat exchanger still has quite a bit of heat in it and eventually heats the sensor back up to run the blower some more.
Great
Very well done
good job john
good detail thank
right before 9:00. The oils of your fingers on the igniter switch tip will cause tip to crack, furnace not to work and new part needed & installed. that fact should be emphasized for sustainability.
A home owner should keep a spare flame sensor and an igniter for their furnace. These items are available via the Internet for about 1/10 of what a service company will charge you. You can also purchase the fans for your furnace. Fans last a long time, 10-15-20 years typically. They normally only die when you have house guests during the holidays.
Thankyou!! At 11:37 I think you have a ghost reaching out!! It says something I can’t make it out lol. No I’m not crazy lol
Mikey O’Donnell yes!!!
I hear it too.
Look inside...
mamma mia! How fast can you get out of that attick!
Its at 11:35. I definitely hear it.
They wanted 185.00 dollars to do what u just showed us thank u
There is also the humidifier filter
This guy must have said "what not" about 150 times in this video.
Thanks for the video John. Greetings from Holland;-)
What-not.
Lol I’m sure you recommend I call a professional :/ like this is rocket science. I’ll find another video
The care taker here told me if I hold the filter up to a light bulb and I can see the light it is a good filter [ the filter black as tar not changed for two years, two rays of light shone through.] Can this be right? I took care of my home furnace and this is exactly 180 degrees from what I learned years ago.
Two rays of light isn't "seeing the light", just replace it twice a year minimum and call it good.
I love all the WHAT NOTS!
I don't have gas/ oil
I agree with other viewers that the cameraman sucks. He is way too far away and you cannot see the details of the Flame sensor or the burners and other things. Get up in that furnace his face. It’s almost like a cameraman couldn’t get close because he had some contagious disease and the HVAC tech didn’t want to get sick.
Good video and whatnot
Thank you Sir for sharing your knowledge!!!!!!!!!
Thank you so much for this you don't know how much of a blessing this was!!!
Cleaned system so half the things you mentioned were not done by you or what not.
anyway around not sniffing it lol like soap or something
Good video make more