Id richen the Bottom end off a tad too. If it were mine . 😊 Nice to see the thing you created out and running .
@rcnitroflux23616 күн бұрын
Cheers bro yeah still gotta figure out some problems with it like finding 2mm 16 inch rods for brake and throttle don't no if glue gonna hold on them lol
@hybrid324947 күн бұрын
Hey bro! Great first run with this super innovative build! Too bad the brakes failed, probably something small I'd say. Good think we had no run aways and it's safe.. NitroGang!!!!
@rcnitroflux23617 күн бұрын
Yeah bud grub screw in front drive shaft come off bud
@Big-Mike8 күн бұрын
Sounds like your from the west country me old mate! Take it easy brother cheers
@rcnitroflux23618 күн бұрын
Bristol bro thanks for watching
@chicagorc39678 күн бұрын
Looks good💪
@rcnitroflux23618 күн бұрын
Cheers bro
@hybrid324948 күн бұрын
super innovative and great solution bro! you're literally making nitros GREAT out there!! I will try this also on my other savages.!!
@rcnitroflux23618 күн бұрын
Can get 3 pack for 5 bucks I just looked for 15 pounds delivered can get real light bar from model sport UK bud
@chicagorc396711 күн бұрын
💪
@rcnitroflux236110 күн бұрын
Cheers bro
@hybrid3249412 күн бұрын
wow bro! amazing work! You're the only I know with a true 1/5 scale savage at this point! Amazing!!
@rcnitroflux236112 күн бұрын
Cheers bro
@rawrc13 күн бұрын
Behemoth!!
@rcnitroflux236113 күн бұрын
Yeah it's huge bud it's bigger than Baja thanks for watching
@mark-1rc50214 күн бұрын
Oh i hated them roto starts
@rcnitroflux236114 күн бұрын
Yeah perfur the pull start bud change the motor to ansmann .28 no comparison in old motor gonna bake and repinch the sleeve soon see if got any life left in it bud
@JosePereira-nr1vy15 күн бұрын
Did you need modify the engine mount?
@rcnitroflux236115 күн бұрын
Only for bigger pinion bell bud just need to remove side of chassis and make mount holes longer bud
@hybrid3249415 күн бұрын
very nice run bro!! Is that an axial engine? looks like a green color cooling head from here to me.
@rcnitroflux236115 күн бұрын
It's ansmann .21 same as force .21 bud
@CrazyDadNitro-2.015 күн бұрын
Nice. 👍always . Thank you for sharing. 😊
@rcnitroflux236115 күн бұрын
Cheers bro
@offsetrc15 күн бұрын
Runs nice don't it man that's right on the sweet spot that
@rcnitroflux236115 күн бұрын
Cheers bro
@allaspectsrc417816 күн бұрын
Hell yeah brother
@rcnitroflux236116 күн бұрын
Cheers bro
@mark-1rc50218 күн бұрын
I had one of them too back in the day. Shoved picco 28 init
@rcnitroflux236118 күн бұрын
Nice bud I recently brought couple of new lrp
@mark-1rc50218 күн бұрын
@@rcnitroflux2361 Sorry picco 26. Yeah them Lrp seem good engines too.
@hybrid3249418 күн бұрын
Hey bro! Happy to see you getting some new Vintage nitros!! Im sure this took some work to repair, usually in my case most hot bodies models have a hard life, lol, you know.
@rcnitroflux236118 күн бұрын
Yeah bro was covered in rust engine was seized carb was seized engine compression is not the best bud
@mark-1rc50221 күн бұрын
What is he ? A chihuahua
@rcnitroflux236121 күн бұрын
Tea cup Chihuahua my mum got for me for me birthday bud
@mark-1rc50221 күн бұрын
@@rcnitroflux2361 Wow they’re not cheap. £1000/£1200 Just think how many nitro cars that could of bought 😝 .
@mark-1rc50222 күн бұрын
Lol😂 nice . Thanks for the shout out spike .
@offsetrc22 күн бұрын
Think it looks good with that truck body on it
@rcnitroflux236120 күн бұрын
Yeah Ford f150 looks great bud
@hybrid3249422 күн бұрын
Running great my dude! Love thats Ford F-150 body, I have the same one but without stickers unfortunately. NItroGang!..
@rcnitroflux236122 күн бұрын
Could only get half throttle in that park bud every time I got it had to brake
@TexasHill21 күн бұрын
Kyosho Pure Ten V One Gang !!! I have a couple too !! Think its small block summer time !!!
@rcnitroflux236121 күн бұрын
@TexasHill yeah bud I've just brought pure ten kyosho to go with my vone and other kyosho road car I got very fast for small block time I got up to speed had to break
@hybrid3249425 күн бұрын
awesome new hobao bro, and finally a normal reliable engine on one of these, unlike the thirsty and tough to tune hyper 30 engines. Congrats!!
@rcnitroflux236125 күн бұрын
It's brand new thunder tiger.28 I brought of ebay new old stock
@michaelgraham294325 күн бұрын
Excellent 👍
@rcnitroflux236125 күн бұрын
Cheers bud
@offsetrc27 күн бұрын
That slow mo jump did look really cool man nice 👍
@rcnitroflux236127 күн бұрын
Yeah pretty fast for brushed car
@user-ok5qz7xm2d27 күн бұрын
Cool
@rcnitroflux236127 күн бұрын
Cheers bro
@michaelgraham294328 күн бұрын
Sounds good
@hybrid3249428 күн бұрын
Hey my dude! Happy to see you putting that 3D printer to use, I'm doing the same!
@rcnitroflux236128 күн бұрын
Put new plug in it old one kept turn on and of
@rawrc28 күн бұрын
👍
@rcnitroflux236128 күн бұрын
Cheers bud
@mcjdubpower29 күн бұрын
Gud vid 😊
@rcnitroflux236129 күн бұрын
Cheer's bro
@mcjdubpower29 күн бұрын
@@rcnitroflux2361 More than welcome bud 😃
@michaelgraham2943Ай бұрын
Excellent 👍
@rcnitroflux2361Ай бұрын
Cheers bro
@chicagorc3967Ай бұрын
Can't wait to see her rip!
@chicagorc3967Ай бұрын
Glad you figured it out
@rcnitroflux2361Ай бұрын
Had take it a part bud lucky I found ball spring on eBay bud
@janapier8990Ай бұрын
No jumps ...nuthin just runnin 'er around 4the sweet SOUND!...❤
@rcnitroflux2361Ай бұрын
Bud I don't really no how to jump my dad gonna make me a ramp I can to grass to learn this summer
@mcjdubpowerАй бұрын
Gud vid
@rcnitroflux2361Ай бұрын
Cheers bro
@chicagorc3967Ай бұрын
Looks like a near little rc! Good job cleaning it up!
@rcnitroflux2361Ай бұрын
Cheers bud it had grey over spay all over it bud used nitro fuel to clean it of bud
@MayhemandMirthRCАй бұрын
Nice truck mate 👍 our channel always has love for the nitro gang, sub given 👌
@MayhemandMirthRCАй бұрын
Edit - already subscribed but the thought was there 😜
@rcnitroflux2361Ай бұрын
Cheers bud
@mcjdubpowerАй бұрын
Gud vid 👍
@Richard-jv9pwАй бұрын
Mine is only running backwards and I have swapped the diffs over but still not going forward any ideas
@offsetrcАй бұрын
Make sure you one way bearing is the right way round
@Richard-jv9pwАй бұрын
@@offsetrc okay thanks
@Richard-jv9pwАй бұрын
It's in the right way engine runs mint just can't get it too go forward
@rcnitroflux2361Ай бұрын
Sounds like motor going wrong way turn one way bearing around make sure motor is spinning counter clock wise bud
@Richard-jv9pwАй бұрын
@@rcnitroflux2361 okay I will give it a go
@chicagorc3967Ай бұрын
Those are nice 👌
@rcnitroflux2361Ай бұрын
Cheers bro
@chicagorc3967Ай бұрын
@@rcnitroflux2361 🍻
@2nd_gear_driftingАй бұрын
Nice
@rcnitroflux2361Ай бұрын
Cheers bro
@offsetrcАй бұрын
Counter stair and Throttle Is how its done my man oh dab of the e brake helps to 👍
@rcnitroflux2361Ай бұрын
Gonna put rubber on tomorrow give it a run
@offsetrcАй бұрын
@rcnitroflux2361 for sliding around bout bud as the car don't have e brake yous Scandinavian flick to start the slide bud then counter steer to keep it going with throttle inputs to keep it going longer 👍
Пікірлер
Nice truggy!
Cheers bro got little bit leen in end bud
Ya man it's a good un that bud definitely liking your hpi buggy
Cheers bro
Very cool
Cheers bro
Basically they’re the same i think
Slightly better servos in hot bodies HPI use sf1 and sf2 hot bodies are bit more powerful bud
@@rcnitroflux2361 Argh ok , i was more in general referring to the actual car . As things like servo’s are personal taste in most cases .
@@mark-1rc502 yes bud they are same I got 6 hot bodies RC now only show 4 on channel so far bud
Looks bad ass! 👍
Cheer's bro
Awesome build bro !!! NWO !!!! #makenitrogreatagain
Cheer's bro
Id richen the Bottom end off a tad too. If it were mine . 😊 Nice to see the thing you created out and running .
Cheers bro yeah still gotta figure out some problems with it like finding 2mm 16 inch rods for brake and throttle don't no if glue gonna hold on them lol
Hey bro! Great first run with this super innovative build! Too bad the brakes failed, probably something small I'd say. Good think we had no run aways and it's safe.. NitroGang!!!!
Yeah bud grub screw in front drive shaft come off bud
Sounds like your from the west country me old mate! Take it easy brother cheers
Bristol bro thanks for watching
Looks good💪
Cheers bro
super innovative and great solution bro! you're literally making nitros GREAT out there!! I will try this also on my other savages.!!
Can get 3 pack for 5 bucks I just looked for 15 pounds delivered can get real light bar from model sport UK bud
💪
Cheers bro
wow bro! amazing work! You're the only I know with a true 1/5 scale savage at this point! Amazing!!
Cheers bro
Behemoth!!
Yeah it's huge bud it's bigger than Baja thanks for watching
Oh i hated them roto starts
Yeah perfur the pull start bud change the motor to ansmann .28 no comparison in old motor gonna bake and repinch the sleeve soon see if got any life left in it bud
Did you need modify the engine mount?
Only for bigger pinion bell bud just need to remove side of chassis and make mount holes longer bud
very nice run bro!! Is that an axial engine? looks like a green color cooling head from here to me.
It's ansmann .21 same as force .21 bud
Nice. 👍always . Thank you for sharing. 😊
Cheers bro
Runs nice don't it man that's right on the sweet spot that
Cheers bro
Hell yeah brother
Cheers bro
I had one of them too back in the day. Shoved picco 28 init
Nice bud I recently brought couple of new lrp
@@rcnitroflux2361 Sorry picco 26. Yeah them Lrp seem good engines too.
Hey bro! Happy to see you getting some new Vintage nitros!! Im sure this took some work to repair, usually in my case most hot bodies models have a hard life, lol, you know.
Yeah bro was covered in rust engine was seized carb was seized engine compression is not the best bud
What is he ? A chihuahua
Tea cup Chihuahua my mum got for me for me birthday bud
@@rcnitroflux2361 Wow they’re not cheap. £1000/£1200 Just think how many nitro cars that could of bought 😝 .
Lol😂 nice . Thanks for the shout out spike .
Think it looks good with that truck body on it
Yeah Ford f150 looks great bud
Running great my dude! Love thats Ford F-150 body, I have the same one but without stickers unfortunately. NItroGang!..
Could only get half throttle in that park bud every time I got it had to brake
Kyosho Pure Ten V One Gang !!! I have a couple too !! Think its small block summer time !!!
@TexasHill yeah bud I've just brought pure ten kyosho to go with my vone and other kyosho road car I got very fast for small block time I got up to speed had to break
awesome new hobao bro, and finally a normal reliable engine on one of these, unlike the thirsty and tough to tune hyper 30 engines. Congrats!!
It's brand new thunder tiger.28 I brought of ebay new old stock
Excellent 👍
Cheers bud
That slow mo jump did look really cool man nice 👍
Yeah pretty fast for brushed car
Cool
Cheers bro
Sounds good
Hey my dude! Happy to see you putting that 3D printer to use, I'm doing the same!
Put new plug in it old one kept turn on and of
👍
Cheers bud
Gud vid 😊
Cheer's bro
@@rcnitroflux2361 More than welcome bud 😃
Excellent 👍
Cheers bro
Can't wait to see her rip!
Glad you figured it out
Had take it a part bud lucky I found ball spring on eBay bud
No jumps ...nuthin just runnin 'er around 4the sweet SOUND!...❤
Bud I don't really no how to jump my dad gonna make me a ramp I can to grass to learn this summer
Gud vid
Cheers bro
Looks like a near little rc! Good job cleaning it up!
Cheers bud it had grey over spay all over it bud used nitro fuel to clean it of bud
Nice truck mate 👍 our channel always has love for the nitro gang, sub given 👌
Edit - already subscribed but the thought was there 😜
Cheers bud
Gud vid 👍
Mine is only running backwards and I have swapped the diffs over but still not going forward any ideas
Make sure you one way bearing is the right way round
@@offsetrc okay thanks
It's in the right way engine runs mint just can't get it too go forward
Sounds like motor going wrong way turn one way bearing around make sure motor is spinning counter clock wise bud
@@rcnitroflux2361 okay I will give it a go
Those are nice 👌
Cheers bro
@@rcnitroflux2361 🍻
Nice
Cheers bro
Counter stair and Throttle Is how its done my man oh dab of the e brake helps to 👍
Gonna put rubber on tomorrow give it a run
@rcnitroflux2361 for sliding around bout bud as the car don't have e brake yous Scandinavian flick to start the slide bud then counter steer to keep it going with throttle inputs to keep it going longer 👍
Cheers bro
🔥👍🏽👍🏽🔥 nice platform
great run
traxxas parts not come yet