Its alot of shit. I wonder if it's that hard on Lexus Es300 97
@eloymontoya92008 ай бұрын
Yea it was a lot of "fanagaling"
@ChrisWilliams-lt8lq8 ай бұрын
Took mine off riding on 5100s and medium spring. Improved off-road but too much body roll for me on. I upgraded to an adjustable (compression/rebound not ride height) external reservoir shock which basically gave me the ability to "tune'' the ride and tame the body roll significantly. I believe the safety aspect of removing it depends on your IFS set-up.
@joetrueblood766311 ай бұрын
The easiest way to get to the front EGR nuts is to remove the battery 👍
@jorgewong910 Жыл бұрын
Did your pickup truck pass inspection after you deleted the EGR?
@taterchipwheeling11 ай бұрын
We don't have to do emission testing here so that wasn't a concern for me.
@mer25able Жыл бұрын
11:05 Can you give me the specifications of the installed resistor?
@douglas1982b11 ай бұрын
10k and 5.6k resistor.
@brandonhoweth926 Жыл бұрын
You forgot a socket on the manifold 😂
@ec7945 Жыл бұрын
Should have deleted it when you lifted the truck, I want to delete mine on my Mazda b4000
@GabrielGonzalez-fr9yf Жыл бұрын
Where do the resistors go?
@taterchipwheeling Жыл бұрын
I mentioned it at 3:38 in the video. The resistor goes into the sensor plug that you unplug.
@GabrielGonzalez-fr9yf Жыл бұрын
@Tater Chip Wheeling i went and rewatched the video, thank you for replying anyway!
@JalenRose02 Жыл бұрын
So I'm deleting my egr valve considering isn't working properly and i don't think it's worth buying oem egr valve so i don't see the check engine light. Do you have any issues on the engine temperature?
@taterchipwheeling Жыл бұрын
I have not had any issues with temps. My truck essentially performs the same as before.
@JalenRose02 Жыл бұрын
@@taterchipwheeling i done deleted my egr engine bays looks a lot cleaner now. just bout to replace knock sensor out though.
@taterchipwheeling Жыл бұрын
@@JalenRose02 Nice! Yeah, it clears up a lot of space!
@JalenRose02 Жыл бұрын
@@taterchipwheeling well the motor decided to take shit today, it sounds like its knocking like a mf or the knock sensor would not let it start. seen the smoke in the oil cap
@Bad1nfluence88 Жыл бұрын
How’s the sway bar now 1 year after? Still off?
@taterchipwheeling Жыл бұрын
Yup, it's still off! Haven't wanted to put it back on.
@ER--jq8tz Жыл бұрын
so what are the advantages of the egr delete?
@taterchipwheeling Жыл бұрын
People say it can make the engine run cleaner, improve MPG, or increase power.
@jeekboi Жыл бұрын
@@taterchipwheeling all of the above
@dadgarage79665 ай бұрын
@@jeekboi By how much?
@usca3981 Жыл бұрын
So did you gain hourse power by doing all this what are all the benifits you got by doing all this. ?
@taterchipwheeling Жыл бұрын
I haven't noticed any differences. I just did it as easy little project, not for any specific reason. People say it can make the engine run cleaner, improve MPG, or increase power.
@dadgarage79665 ай бұрын
It's a cheap alternative to fixing the EGR system if it malfunctions plus the plugs are easier to change.
@AnotherRandomPoser2 жыл бұрын
Those 14mm bolts are making me hate life at the moment but your vid is helping me thru it all, greatly appreciate it!
@douglas1982b2 жыл бұрын
nice yota ! here are two of my videos with the EGR delete... kzread.info/dash/bejne/f4ds2LNupreZnaQ.html 😊 kzread.info/dash/bejne/hn2gqayzhJzYnpM.html
@tedvargovich50202 жыл бұрын
I like how every video I've watched on this delete process says to put that bottom plate back on because there's a brake line attached to it 🤨 it's the same as a brake line but it's actually for your clutch!
@johnhenderson64072 жыл бұрын
Thank you
@RealShosko2 жыл бұрын
yo I know this dude
@Matt-np6nq2 жыл бұрын
What’s the go with the crack in your lower control arm?
@taterchipwheeling2 жыл бұрын
what crack?
@texasforever3.0252 жыл бұрын
How’s it running now ? How has it held up ? Any regrets ?
@taterchipwheeling2 жыл бұрын
Running great still with no issues. Honestly couldn't really tell the difference after I did it, but it was a nice little project. It's inexpensive to do so I have no regrets.
@dcngp70672 жыл бұрын
Can you do a video on the vacuum lines I’m having a hard time
@douglas1982b2 жыл бұрын
get them figured out ? when dealing with a lot of vacuum lines use multi-colored zip zies. one on the hose, and one where it goes. you can souble up for more color variations too. snip them for a clean look and just leave them on for future maintenance! 😎
@santosj22742 жыл бұрын
I took off mine of my SUV. Honestly it rode way better off road. No noticeable difference on road except a bit more body roll on corner at higher speed..
@aaronwhitefoot2 жыл бұрын
I broke mine hunting and my buddie said just to take it off.
@herby3752 жыл бұрын
IM doing that for sure, Thanks! where did you get those front headlights, looks great!
@drivewaytruck25612 жыл бұрын
Would also like to know about the headlights.
@user-fw3wx8rz6r2 жыл бұрын
На русском где?
@taterchipwheeling Жыл бұрын
I got them from CarID.com
@marvmarv90272 жыл бұрын
how's it running so far? and how many miles does your engine have currently bro?
@taterchipwheeling2 жыл бұрын
Running great as always. Honestly doesn't run any different than before, but my engine is probably happier. I'm at 216k miles right now.
@marvmarv90272 жыл бұрын
@@taterchipwheeling sounds good man, do an update at 230k!!!
@idrisu12 жыл бұрын
Just finished this job with the help of your video, unfortunately the top egr stud snapped and now the car runs terrible..
@taterchipwheeling2 жыл бұрын
Happy I could help. You gotta be careful with these old bolts. Hopefully you can get it all squared away.
@drivewaytruck25612 жыл бұрын
Check out 3.slow gang. That happened to them I believe and they welded it all shut with good results if I remember correctly. You can also probably weld a nut to the stud and extract it that way if you’re already going to be doing some welding.
@Sefiarnold2 жыл бұрын
My suggestion for a cleaner resistor installation would be to get the other end of the PAIR valve electrical plug (off the removed hardware) cut the wires short and solder the resistor into the circuit and cover it in heat shrink or something, and just plug that in.
@taterchipwheeling2 жыл бұрын
That's a good idea. I thought about doing something like that.
@ThisOldYota2 жыл бұрын
Did the resistor come from LCE?
@ThisOldYota2 жыл бұрын
Good looking truck, glad you’re keeping the 3VZE going
@taterchipwheeling2 жыл бұрын
Yes, the kit came with 2 resistors.
@taterchipwheeling2 жыл бұрын
@@ThisOldYota Thank you!
@renerivas36192 жыл бұрын
When. You take out the. Egr the engine work. Ok. ❓
@taterchipwheeling2 жыл бұрын
Yup, works perfectly good. The EGR is not an important part of the engine.
@thomaspharazyn3 жыл бұрын
If you still have the parts I'll buy them!
@taterchipwheeling2 жыл бұрын
I'm holding onto them just in case for now. I'll keep you in mind though.
@thomaspharazyn2 жыл бұрын
@@taterchipwheeling I found one mate, lol that was a month ago
@user-fi1xu1pp7p3 жыл бұрын
What if you just pull out the hoses and cap them off like you did, but leave the 3 valves in the engine bay which you have removed in the video but also cap the valve ports to just avoid getting block off plates ? Or do you think it won't work and just get the block off plates and remove all 3 valves. Lol my lazy ass trying to do the least amount of work possible 🤣 .... But man great video. It is clear and so understandable. But I mean $20 for the LC kit is not bad. But I just want to avoid taking those hard to reach bolts off lol 😂
@taterchipwheeling3 жыл бұрын
I don't know for sure and don't want to miss lead you. I'd just get the kit. Removing everything gives you more space in your engine bay too which is nice. Makes doing your spark plugs much easier.
@tmaxrecer3 жыл бұрын
Thank you. What you do with the fuel pressure regulator
@taterchipwheeling3 жыл бұрын
That's the first thing I go over at the 17 second mark. You basically just take it and the bracket it sits in off with a 12mm, cap off the vacuum lines that went into it, and the put the 12mm bolt back in the engine so there isn't a whole.
@Mendozabmx3 жыл бұрын
Whats the bulb size for the ac control?? My doesn’t light up:/
@taterchipwheeling3 жыл бұрын
Are you talking about the ac button or the back lighting for the sliders?
@mason3vze7403 жыл бұрын
Brooo you gotta do more KZread your videos are dope
@taterchipwheeling3 жыл бұрын
Thank you! I plan to
@mybackhurts70203 жыл бұрын
The only reason to take it off is if your rock crawling a lot you’re way more likely to roll without it I should know there’s a reason my back hurts
@user-iq3kt4nb3q3 жыл бұрын
👍
@taterchipwheeling3 жыл бұрын
🤘
@user-iq3kt4nb3q3 жыл бұрын
✋
@taterchipwheeling3 жыл бұрын
✋ high five
@ThisOldYota3 жыл бұрын
Good looking truck young man. How does it handle when at speeds on the highway?
@taterchipwheeling3 жыл бұрын
Besides a little more tilt around corners, it's basically the same. I think I get a little more flex without it too.
@ThisOldYota3 жыл бұрын
@@taterchipwheeling I may just have to remove mine. Also will have less bushings to worry about lol
@taterchipwheeling3 жыл бұрын
@@ThisOldYota Less parts, less problems
@alexquiring24373 жыл бұрын
ifs boys are at it again
@taterchipwheeling3 жыл бұрын
you know it
@zacksmith32703 жыл бұрын
You need a sas
@taterchipwheeling3 жыл бұрын
Yeah, I am very much aware. I want one so bad. I'll get around to it eventually.
@wyattsamson7023 жыл бұрын
Can I have your autograph🤤
@taterchipwheeling3 жыл бұрын
Of course bud
@kohlgossler70833 жыл бұрын
Damn this is way better than Instagram posts🤣
@taterchipwheeling3 жыл бұрын
For real! I'm gonna be making a lot more videos like this.
@Leo-db4sl3 жыл бұрын
I can say first?
@ethanliu85554 жыл бұрын
moraine lake in lake louise alberta is better imo very beautiful, but there is no place to stay, could also visit banff. would recommend, but this lake look beautiful as well great vid
@RealShosko4 жыл бұрын
Awesome job on the video taylor!
@puffy69754 жыл бұрын
is it me or did i go their last week lake weetanchee in wa state?
@jonmccoy66714 жыл бұрын
Good video Taylor was happy to see u and shosko be happy doing this stuff
Пікірлер
I don’t even got swgay bars 1985 1gen 37”
Its alot of shit. I wonder if it's that hard on Lexus Es300 97
Yea it was a lot of "fanagaling"
Took mine off riding on 5100s and medium spring. Improved off-road but too much body roll for me on. I upgraded to an adjustable (compression/rebound not ride height) external reservoir shock which basically gave me the ability to "tune'' the ride and tame the body roll significantly. I believe the safety aspect of removing it depends on your IFS set-up.
The easiest way to get to the front EGR nuts is to remove the battery 👍
Did your pickup truck pass inspection after you deleted the EGR?
We don't have to do emission testing here so that wasn't a concern for me.
11:05 Can you give me the specifications of the installed resistor?
10k and 5.6k resistor.
You forgot a socket on the manifold 😂
Should have deleted it when you lifted the truck, I want to delete mine on my Mazda b4000
Where do the resistors go?
I mentioned it at 3:38 in the video. The resistor goes into the sensor plug that you unplug.
@Tater Chip Wheeling i went and rewatched the video, thank you for replying anyway!
So I'm deleting my egr valve considering isn't working properly and i don't think it's worth buying oem egr valve so i don't see the check engine light. Do you have any issues on the engine temperature?
I have not had any issues with temps. My truck essentially performs the same as before.
@@taterchipwheeling i done deleted my egr engine bays looks a lot cleaner now. just bout to replace knock sensor out though.
@@JalenRose02 Nice! Yeah, it clears up a lot of space!
@@taterchipwheeling well the motor decided to take shit today, it sounds like its knocking like a mf or the knock sensor would not let it start. seen the smoke in the oil cap
How’s the sway bar now 1 year after? Still off?
Yup, it's still off! Haven't wanted to put it back on.
so what are the advantages of the egr delete?
People say it can make the engine run cleaner, improve MPG, or increase power.
@@taterchipwheeling all of the above
@@jeekboi By how much?
So did you gain hourse power by doing all this what are all the benifits you got by doing all this. ?
I haven't noticed any differences. I just did it as easy little project, not for any specific reason. People say it can make the engine run cleaner, improve MPG, or increase power.
It's a cheap alternative to fixing the EGR system if it malfunctions plus the plugs are easier to change.
Those 14mm bolts are making me hate life at the moment but your vid is helping me thru it all, greatly appreciate it!
nice yota ! here are two of my videos with the EGR delete... kzread.info/dash/bejne/f4ds2LNupreZnaQ.html 😊 kzread.info/dash/bejne/hn2gqayzhJzYnpM.html
I like how every video I've watched on this delete process says to put that bottom plate back on because there's a brake line attached to it 🤨 it's the same as a brake line but it's actually for your clutch!
Thank you
yo I know this dude
What’s the go with the crack in your lower control arm?
what crack?
How’s it running now ? How has it held up ? Any regrets ?
Running great still with no issues. Honestly couldn't really tell the difference after I did it, but it was a nice little project. It's inexpensive to do so I have no regrets.
Can you do a video on the vacuum lines I’m having a hard time
get them figured out ? when dealing with a lot of vacuum lines use multi-colored zip zies. one on the hose, and one where it goes. you can souble up for more color variations too. snip them for a clean look and just leave them on for future maintenance! 😎
I took off mine of my SUV. Honestly it rode way better off road. No noticeable difference on road except a bit more body roll on corner at higher speed..
I broke mine hunting and my buddie said just to take it off.
IM doing that for sure, Thanks! where did you get those front headlights, looks great!
Would also like to know about the headlights.
На русском где?
I got them from CarID.com
how's it running so far? and how many miles does your engine have currently bro?
Running great as always. Honestly doesn't run any different than before, but my engine is probably happier. I'm at 216k miles right now.
@@taterchipwheeling sounds good man, do an update at 230k!!!
Just finished this job with the help of your video, unfortunately the top egr stud snapped and now the car runs terrible..
Happy I could help. You gotta be careful with these old bolts. Hopefully you can get it all squared away.
Check out 3.slow gang. That happened to them I believe and they welded it all shut with good results if I remember correctly. You can also probably weld a nut to the stud and extract it that way if you’re already going to be doing some welding.
My suggestion for a cleaner resistor installation would be to get the other end of the PAIR valve electrical plug (off the removed hardware) cut the wires short and solder the resistor into the circuit and cover it in heat shrink or something, and just plug that in.
That's a good idea. I thought about doing something like that.
Did the resistor come from LCE?
Good looking truck, glad you’re keeping the 3VZE going
Yes, the kit came with 2 resistors.
@@ThisOldYota Thank you!
When. You take out the. Egr the engine work. Ok. ❓
Yup, works perfectly good. The EGR is not an important part of the engine.
If you still have the parts I'll buy them!
I'm holding onto them just in case for now. I'll keep you in mind though.
@@taterchipwheeling I found one mate, lol that was a month ago
What if you just pull out the hoses and cap them off like you did, but leave the 3 valves in the engine bay which you have removed in the video but also cap the valve ports to just avoid getting block off plates ? Or do you think it won't work and just get the block off plates and remove all 3 valves. Lol my lazy ass trying to do the least amount of work possible 🤣 .... But man great video. It is clear and so understandable. But I mean $20 for the LC kit is not bad. But I just want to avoid taking those hard to reach bolts off lol 😂
I don't know for sure and don't want to miss lead you. I'd just get the kit. Removing everything gives you more space in your engine bay too which is nice. Makes doing your spark plugs much easier.
Thank you. What you do with the fuel pressure regulator
That's the first thing I go over at the 17 second mark. You basically just take it and the bracket it sits in off with a 12mm, cap off the vacuum lines that went into it, and the put the 12mm bolt back in the engine so there isn't a whole.
Whats the bulb size for the ac control?? My doesn’t light up:/
Are you talking about the ac button or the back lighting for the sliders?
Brooo you gotta do more KZread your videos are dope
Thank you! I plan to
The only reason to take it off is if your rock crawling a lot you’re way more likely to roll without it I should know there’s a reason my back hurts
👍
🤘
✋
✋ high five
Good looking truck young man. How does it handle when at speeds on the highway?
Besides a little more tilt around corners, it's basically the same. I think I get a little more flex without it too.
@@taterchipwheeling I may just have to remove mine. Also will have less bushings to worry about lol
@@ThisOldYota Less parts, less problems
ifs boys are at it again
you know it
You need a sas
Yeah, I am very much aware. I want one so bad. I'll get around to it eventually.
Can I have your autograph🤤
Of course bud
Damn this is way better than Instagram posts🤣
For real! I'm gonna be making a lot more videos like this.
I can say first?
moraine lake in lake louise alberta is better imo very beautiful, but there is no place to stay, could also visit banff. would recommend, but this lake look beautiful as well great vid
Awesome job on the video taylor!
is it me or did i go their last week lake weetanchee in wa state?
Good video Taylor was happy to see u and shosko be happy doing this stuff
‘The shittttter!’