Пікірлер

• 
  @sifuhotman6551Күн бұрын

  So it can send ir signals to multiple devices at once?

• 
  @boboso567621 сағат бұрын

  @sifuhotman6551 yes, it can spam the power button for every make and model tv in just a few seconds. So while it is technically spaced out in Milliseconds rather than being simultaneous... it does appear to be simultaneous.

• 
  @Hackdaplanet-lp1ex2 күн бұрын

  Are u in the bathroom while someone's showering,,lol 😯😆😆😯😂

• 
  @cyberdoctors4 күн бұрын

  What was your config Can’t get this to work

• 
  @boboso56764 күн бұрын

  I have my entire pre-configured and setup sd card with everything youd ever want posted on my blog, nothing much has changed since last year when I posted it other than maybe a few TV IR remotes but thats about it. Find it pinned here: www.damnedmodders.com/group/flipper-zero/discussion Once you have copied all that to your sd card and installed Xtreme or Momentum CFW , everything should work perfectly 👌

• 
  @HoneandGrind7 күн бұрын

  HELP PLEASE : so everything is done right , but when I select the and load the evil portal and hit start it doesn’t broadcast

• 
  @boboso56766 күн бұрын

  Try different firmware, i like and recommend momentum

• 
  @nickwaah270214 күн бұрын

  If I install the firmwares I like one by one in the usual manner, then I can select them your way when I need to switch

• 
  @boboso567611 күн бұрын

  Exactly!

• 
  @zombieslayer1994115 күн бұрын

  Fake

• 
  @boboso567615 күн бұрын

  Its a proof of concept, i dont live by any opticom lights to try it, but it should work at night with an unencrypted opticom system, just good luck finding one...

• 
  @user-sg2yt6nc1z16 күн бұрын

  Now try it at the DMV to get your number called sooner

• 
  @kurupt213Ай бұрын

  Your dogs squeaky toys are fucking annoying as fuck

• 
  @sh4baАй бұрын

  eveyrtime i try to open it on my phone there is these wierd numbers and letters so it looks glitched

• 
  @shannondixon3767Ай бұрын

  Someone needs to do AMI Jukeboxes

• 
  @boboso5676Ай бұрын

  I agree!

• 
  @AlexAlfariiАй бұрын

  Could you clarify for me what I can really do? I have a flipper but I still haven't been able to take advantage of its potential. Today I got a CC1101 antenna. please help

• 
  @boboso5676Ай бұрын

  This video demonstrates an amplified c1101, The flipper has an internal c1101 already so just a regular c1101 wont be much of a difference

• 
  @mohamed_yahya_1Ай бұрын

  I'm glad you found the video helpful! If you’re looking for your advice on the best board for pass Wi-Fi , I can certainly help with that. There are several board and i am so confused. so need your help please.

• 
  @hugomaximilian9401Ай бұрын

  tysm!!!!!!!!!!😃

• 
  @blissbane8448Ай бұрын

  I got an Eye Of Horus from rabbit labs and I’ve done everything in this video but even after I turn the 5v power on in GPIO settings, when I open the PWM generator the power light on my ir board turns off. I can’t get the 5v power to stay on

• 
  @boboso5676Ай бұрын

  Thats really wierd, i would contact them on their discord...

• 
  @blissbane8448Ай бұрын

  @@boboso5676 it gets hot quick though. Fast configuration, short burst, exit app

• 
  @boboso5676Ай бұрын

  @blissbane8448 I have never played with that version, I have a Masta Blasta and an original IR blaster, but have not had any experience with that particular board

• 
  @blissbane8448Ай бұрын

  @@boboso5676 The masta blasta seems comparable though that should be strong enough

• 
  @tehrabbitt8 күн бұрын

  Eye of Horus is a COPY-CAT product made by "Dtech" who is not affiliated with Rabbit-labs. Power being turned off by the flipper means you are exceeding the safe limits of the 1A fuse on the 5v pin and you risk damaging your flipper.

• 
  @carllarsen7822 ай бұрын

  Get off the drugs

• 
  @mgscheueАй бұрын

  Has that worked for you?

• 
  @carllarsen7822 ай бұрын

  Sloooooooooooooooooooooooooooooooooooooooooooooooooommmmmmmmmmmmmmmmmmmmmmmmmmooooooooooooooooooooooooooooooooooooooo

• 
  @onepunchman61652 ай бұрын

  May i know what are all the things i need to may a DIY mayhem board? Getting one directly isnt an option in my country.

• 
  @Atmatan_Kabbaher2 ай бұрын

  As others have said, its weird how obvious and overlooked this is. Now ill be able to easily test my cfw without using my phone to update back to ofw every time. And as always: plenty of people proving why they shouldn't own one 😂

• 
  @austingarland82422 ай бұрын

  Good way to go to jail

• 
  @boboso56762 ай бұрын

  Yup, prison is full of the poor souls that got caught shining a light that is not detectable by the human eye. Gotta watch out for those darn cops roaming around with night vision goggles!

• 
  @austingarland82422 ай бұрын

  @@boboso5676prison is different than jail for 1. 2, most opticom enabled streetlights where I’m from also have a camera now. If you didn’t know, cameras don’t need night vision to see IR light. 3. Every activation of an opticom is logged whether it has a camera nearby or not. Opticom activations not coinciding with an emergency nearby can also be flagged. ;)

• 
  @boboso56762 ай бұрын

  @austingarland8242 ok, but 1. I don't live where you live. The worst case for me is a $40 bribe to the cop. 2. Not a single light where I live have cameras. However, even if they did, how would they identify me unless I was in a car pointing my DL plate at the camera? I originally made this video based off of Peter Fairlie's fake video, I wanted to see if anyone else could replicate it... didn't know his video was an outright fake. 3. You would have to be drawing quite a bit of attention to yourself to get yourself in trouble trying to play with an opticom unless your a complete ding dong and stand in the middle of the street flashing the thing, I don't really see the cops putting out an APB for someone with something not much more powerfull than a TV remote, pointing it in the general direction of a stop light. 4. Don't worry, most are encrypted, but very few in old parts of the US have been reported to work, especially on the east coast which is a shame cuz thats far from me. 5. In the USA, Prison generally refers to a state or federal facility whereas Jail generally refers to a county ran facility, but with the prop 36 re-alignment in California, you've got people serving up to 16 years in LA county jail which is about as rough as it gets...

• 
  @austingarland82422 ай бұрын

  @@boboso5676 kzread.infokPGs-EwdGvs?si=CzGgI9tDVS1vAYG2

• 
  @jmac8219Ай бұрын

  😂😂😂😂😂😂

• 
  @user-mi3cc8tg5p2 ай бұрын

  where can i get pins from? because it says the pins don't come with the order

• 
  @boboso56762 ай бұрын

  Any pins will do, Amazon, Aliexpress, Ebay, Walmart... they all have them

• 
  @nikopapas32162 ай бұрын

  you arent going to mess with any opticon sensors. This may fool some internet people but if you did absolutely any real research yourself you would know this will never work. A quick look at the spec sheet for opticon you would see their IR receivers only receiv the 890nm wavelength which LEDs for this spectrum are hard to find and expensive... Pretty much nothing else uses them. The IR LEDs on the IR blaster are 940nm which is what pretty much everything IR is these days with the exception of some 850nm use cases, but even those WILL NOT activate the traffic preemption devices receivers. (Not to mention almost ALL preemption devices these days use either some form of encoding in tyhe IR signal used to identify department and vehicle number within this 14hz signal through manipulating the duty cycle and tying it toreal time temperature data and/or timestamp, or using a combnation of IR and GPS signals that are broadcasted to the opticon and verified through a database or cloud structure.) You either did this for clicks in which case SHAME ON YOU or you really thought this would work because you did zero research yourself (your generation is lazy and thats too much work, we get it) in which case youre another script kiddy google warrior with a cool hacker toy you dont understand any of because you want to appear to be an elitist amongst your also uneducated social circle in which case, again... SHAME ON YOU. Proof of concepts actually work... that cute little chuckle you did as you nutted yourself on camera when you thought you hacked the secrets of the universe... PRICELESS hahahahahahahahahahaha

• 
  @user-mi3cc8tg5p2 ай бұрын

  i have no idea how to use said files to order the air mouse, so if someone could help with that i would appreciate it

• 
  @boboso56762 ай бұрын

  Oh dude, If your in the United States, I can sell you one of the ones I ordered, I tried to make a video on how to order the airmouse but it was a shitty video and I think I mighta missed some parts, but if your interested, its: kzread.info/dash/bejne/hnitsKd_eKW7mLQ.htmlsi=7bGuLPTP6BAVbc99

• 
  @HobieFish2 ай бұрын

  This does not work and it’s a felony to try. Do better children.

• 
  @grc_whale13042 ай бұрын

  Is this with the official or unofficial firmware? For some damn reason it just says file empty in my flipper.

• 
  @boboso56762 ай бұрын

  You will need to be on a third party firmware like Xtreme or Momentum, I recommend downloading the latest dev builds from their respective discords

• 
  @grc_whale13042 ай бұрын

  I downloaded the Flipper IRDB off of UberGuidoZ GitHub. It was 28k items 😂 I literally have any remote ever made lol. Get it if you haven’t yet.

• 
  @SenSawada3 ай бұрын

  hi, I added all folders and files from the archive, but when logging in with flipper zero, it does not see files, but only folders, as if all files are hidden, how can I fix it?

• 
  @alexson4073 ай бұрын

  What does the infrared do?

• 
  @boboso56763 ай бұрын

  A TV/VCR/PS5/LED screen and more use InfraRed to emit a signal

• 
  @SuperXayahJinx3 ай бұрын

  Can u tell me which accessory is good key enxteder i live super high in aparment and there motorcycle triggers alarm ajd need something to turn off by distance

• 
  @boboso56763 ай бұрын

  Rabbit labs "flux capacitor" is an amplified c1101 and is good for that

• 
  @SuperXayahJinx3 ай бұрын

  @boboso5676 ohh thanks im see if i get it, i berly order a flipper zero i ordered to have fun nothing else 😅 and about the car alarm to make extend hate to hear neighbors knowking to shut up my car... and believe me once i put on silence and my car baterry got stolen and some bounches of stuff i had in there

• 
  @SuperXayahJinx3 ай бұрын

  @boboso5676 its gone there is no more at the store any other store u recommend

• 
  @boboso56763 ай бұрын

  @SuperXayahJinx I have not had any positive experiences buying those 433mhz power outlet switches but they do sell them for a bit more on Amazon if ya wanna go that route

• 
  @KennethKidGamingPlus3 ай бұрын

  Love the cart on the right😭🤣

• 
  @boboso56763 ай бұрын

  Iykyk🤣

• 
  @juliusdamanauskas6623 ай бұрын

  Hi what sowtware you using

• 
  @boboso56763 ай бұрын

  I was using Xtreme for this video but now I use Momentum which is now made by the same devs as xtreme was...

• 
  @worgle1233 ай бұрын

  You could also just pin the installer to your favourites, so you don't need to find it each time.

• 
  @Sosa4x3 ай бұрын

  I got extream only the red light works cant get mine to all light up

• 
  @boboso56763 ай бұрын

  Go into GPIO and turn on the 5v power

• 
  @Sosa4x3 ай бұрын

  @@boboso5676 Still only one none of the 12

• 
  @Sosa4x3 ай бұрын

  @@boboso5676 Did that still only one red led works, i had it for 2 days been trying to get all the other 12 legs to light up

• 
  @Sosa4x3 ай бұрын

  @@boboso5676 Still only one led working but yours is doing the same thing not all 12 leds are turning on

• 
  @mrcencei7273 ай бұрын

  but... are you installing a fw and when you change to the other fw, also this is installed again ! so you will flash / install the fw once and once again ?

• 
  @boboso56763 ай бұрын

  Yes , so basically you can keep multiple versions of firmware on your flipper sd card and flash the flipper directly from the device

• 
  @Atmatan_Kabbaher2 ай бұрын

  'flashing' literally means rewriting all data on the chip. Until the cpu burns out, you can reflash as many times as you want.

• 
  @mr.s19613 ай бұрын

  lol @ calling it a china knockoff when they both made in china, just one doesn't have the name of a capitalistic company/brand name you know. lol

• 
  @mgscheueАй бұрын

  Is it made in China? Is it a knockoff?

• 
  @lafpaf.3 ай бұрын

  video starts (minecraft glass breaking in the background)

• 
  @hugomaximilian9401Ай бұрын

  your right🤣

• 
  @andlykwan3 ай бұрын

  this is awesome!

• 
  @zsoltibitter87614 ай бұрын

  I have just read some interesting stuff about counterfeit NRF24 ICs. Nordic has made a mistake in their datasheet of NRF24 and who copied it copied with the mistake and implemented it in the fake ones. So all the fake ones have some problem in a register during communication and it can cause issues. I just wanted to let you know that this might be the issue. If you are not lazy try to desolder the shielding and swap the NRF24 ICs from a working one and see if it helps.

• 
  @boboso56764 ай бұрын

  Ill have to check that out, Thanks!

• 
  @emmcee73334 ай бұрын

  What kind of canary do you have?

• 
  @boboso56764 ай бұрын

  So the story is that we had a love bird fly into our apartment one day that must have escaped from its cage nearby. A few days later we found another one (probably its mate) dead outside. Of course we kept the bird and gave it a cage and toys and everything but it seemed lonely. So we went to the pet store and bought her a new boyfriend. Only problem now is that she wont stop having babies lol. So now we have 3 bird cages full of birds all from that one pair!

• 
  @paranoidzkitszo4 ай бұрын

  At 8:45 -- you dis your kid so hard- it's such a bummer..you're pretty much just looking at a progress bar and in your head going "hurry up hurry up" then your kid asks you a question...the most important question the kid has ever had in his world...every question is the most important question for a kid in that moment..and you are just...like.... "yeh-yeh-yeh"... Then you see how bummed he is- sulking back onto the bed instead of continuing to be inquisitive. Pay attention to your kid- not a progres bar- I'm not tryna tell a parent on how they should- parent- you seem like a "cool" dad- with a Flipper and birds etc- but, how stoked do you think your kid would have been if instead you took your attention offa the progress bar and turned towards your kid and: "Can you ask your question again, i didn't catch that" and actually listened to him and given him a proper answer with the dignity and respect that should have been given... It's a bit of an over exaggeration- especially for our adult brains but at that moment you pretty much did the equivalent of saying; 'shut up kid, you are not worth the time so stop asking questions. We 'adults' don't get it because we can rationalize...we can go(some of us) in our heads and be like;" oh he is busy..i'll ask again once the download is finished and I'll re-ask the question in another form". And you know why that is? Because our parents, in similar situations, would have either addressed us by giving us attention and answering or letting us know they are busy, so that way we could ask again when they weren't but in most cases that question wasn't relevant for us kids so we moved on... This "yeh yeh yeh whatever kid..here is what i thought you asked and now stop talking" response will get you report cards back where once you saw A's B's and stars with comments like" Jimmy is so inquisitive-always first to raise their hand..." to C+, then D's to teacher notes that write,"Jimmy is very shy and sits at the back of the class- barely making eye contact- then "Jimmy doesn't interact much with the other students and is always alone on the play ground"... ... .......worst case Ontario; "Jimmy is an adult now, but years have gone by since you'd seen him- he dropped out and you heard that someone saw Jimmy on skidrow-"--- why? Because there he found substance and others that come from broken situations that give each other that "attention"- mind you it's short lived- how ever long that welfare cheque lasted...but it's that attention that deep inside Jimmy didn't get from a **wholesome**- definitions vary- **attentive** parenting environment. He now gets from either substance or other "Jimmy's". Give kids the time of day- and some. Let them play. Make sure they have a clean room- do their chores/ give 'em a break once in awhile from responsibilities and let them do what they wanna do- but yeah give them the time of day- we may not see it that way but it's just oh so important. Much love and thanks for the content, but yeah, was a bummer to see that.....

• 
  @boboso56764 ай бұрын

  Fair point 🫡

• 
  @chilinvive86834 ай бұрын

  Excellent info , 💯💯💯

• 
  @MrXtahsee4 ай бұрын

  You have any videos on how to solder the pins?

• 
  @boboso56764 ай бұрын

  The pinout instructions can be found in the GPIO section of Uberguidos Github: github.com/UberGuidoZ/Flipper/tree/main/GPIO

• 
  @bearwolffish4 ай бұрын

  Hi, might I ask which Bambu you suggest? If I'm interested taking the printing seriously would you say it is worth investing in the Lab X1-Carbon Combo?

• 
  @boboso56764 ай бұрын

  I have the p1s combo and frikkin LOVE IT! I actually havent been making any videos lately because I have started an Etsy store that is actually making me money. The X1C has a higher quality camera and it has lidar for automatically adjusting the filament settings, but the P1S can do the same things with just an extra couple clicks of the mouse or cell phone using the bambu app. The P1S is so far and above anything else I have ever used, that I really can't see the need for a better camera or AI spaghetti detection since I have only had maybe 3-4 failed prints since I got mine and have already but about 1500 hours on my printer since I bought it, non-stop with just minor clean and Lube every 500 hours or so. If you can afford the X1C then by all means I think it IS worth it, but the P1S will do literally everything the X1C can do print-wise so if making money is your goal, then the P1S will be more cost effective.

• 
  @bearwolffish4 ай бұрын

  ​@@boboso5676 Oh thank you, that is such an inspiration. Ye I work as a tech advisor in finance, building long tail trading systems on the side. Been quietly saving with an idea in mind, and that is a boost to confidence. At worst should end up with an expensive toy I have some personal use for, and at best a potential physical business. Will be taking your suggestion and really appreciate you taking the time for a response. Much love.

• 
  @xXvisualcortexXx4 ай бұрын

  2:17 hoooooooooonk

• 
  @boboso56764 ай бұрын

  Ya, Mexico is a loud place! I was just lucky it wasn't one of the local vendors coming by with their truck-mounted mega-phones to announce they are selling TAAAAAAMAAAAAALES! 🤣

• 
  @evanbrown73254 ай бұрын

  Can you post a link to the USB GPS jammer? I can't seem to find it on AliExpress.

• 
  @boboso56764 ай бұрын

  Whoa! Thats crazy! It looks like Aliexpress has stopped selling them, but good ol Amazon is still selling them 😆, here is a 12v version that is much stronger than the one i used in the video, just be careful not to use it around an airport or you could get busted by the FCC for interfering with the signals there. I read a news story about this type of jammer not long ago. www.amazon.com/HEARSO-Cigarette-Unidirectional-Compatible-Anti-Location/dp/B0CRY95R6C/ref=mp_s_a_1_7?dib=eyJ2IjoiMSJ9.Gg-n6AIDA-LX0CFvHSesrG-PRE3KvoWekgqTnpzACcDgbq3GqpWPIYBM1Wkv022fiKdQVv82kdWYdDe8VhkEChwjBEuilVz4-3QKrxNK1Aa09LsaWgHKxHfiC01k7lr0tBKRsnHbgAF4LwJcl7jBBK-d3tbl2wRhxEYOVqTvXh-Ys0o_Fd-vv5tUQsrhlvr6mgCI91Rq39iM3TJvFCKISg.jH702Gz6Zda7KhxbdtbPEQJweUexu_yrTeNwAihze1c&dib_tag=se&keywords=gps+jammer&qid=1708278957&sr=8-7

• 
  @fliptheworld71644 ай бұрын

  How would I merge the files on linux?

• 
  @boboso56764 ай бұрын

  Im still a noob on linux tbh... i always use my windows pc for stuff like that, just drag and drop...

• 
  @alexsnow33194 ай бұрын

  Give you $100 to make me one...

• 
  @boboso56764 ай бұрын

  You can buy one of these and its waay better: kzread.info/dash/bejne/dph8tJevYcyxhZc.htmlsi=OpbfTPwRXF6gqCbZ

• 
  @fliptheworld71644 ай бұрын

  When talking about the files are you talking about the ".tgz" files?

• 
  @boboso56763 ай бұрын

  Yes

• 
  @john-sf9mq4 ай бұрын

  I'm fairly inexperienced but I wanted to hack my Deathadder v3 pro, and someone said that only the nrf24l01 chip can be hijacked, and I was wondering if can you validate this claim? I thought that modern mice simply encrypt and decrypt from a firmware/driver level.

• 
  @boboso56764 ай бұрын

  Most mice made after 2016 are not vulnerable

• 
  @john-sf9mq4 ай бұрын

  @@boboso5676 How come? They still operate over RF

• 
  @boboso56764 ай бұрын

  @@john-sf9mq they became encrypted

• 
  @john-sf9mq4 ай бұрын

  @@boboso5676 Could we in theory dump the encryption keys from the Windows driver or would you need to open up the mouse and extract it from the MCU?

• 
  @boboso56764 ай бұрын

  @john-sf9mq you can potentially downgrade certain logitek dongles but i never had success with that, its just software encoding on the chip needs to be reverted to a hackable software version. I went thru about 20 amazon mice and garage sale mice before i decided to buy one from shopgoodwill dot com and found an old logitek that uses the dongle with the orange asterix from 2007 and it works great. If the device was made after 2016 then theres a good chance that it can not be downgraded as they can usually only revert back to the lowest firmware they came with. Now i have heard of people flashing them, but i havent been able to do it myself as much as I have tried.

• 
  @Dtr1464 ай бұрын

  There's a restaurant near me that I pick up food from every once in awhile and you have to press a little Honeywell doorbell to ring them in the back to let them know you're there. I'm finding conflicting information online of what frequency it uses. I use the analyzer that they are using in the video but I can't get it to pick up anything from the doorbell

• 
  @boboso56764 ай бұрын

  Then it is not 433mhz, the place in thisbvideo changed theirs as well and it no longer works since it is a wifi signal now instead of 433mhz

• 
  @Dtr1464 ай бұрын

  @@boboso5676 well I looked up the exact model of the doorbell cuz they have it on Velcro. I looked up the model number and I'm getting two completely different results. I was looking for the FCC ID. But I guess that's on the receiver

• 
  @Dtr1464 ай бұрын

  @@boboso5676 The first result I was getting was in the 900s and then the other result was in the 400. I tried capturing the signal underneath both frequencies even in the raw signal but I'm not capturing anything. I can't just stand there and click it forever because it's a doorbell in the middle of a restaurant. But I don't know what else I can do to swiftly go in grab it and walk out. I just like collecting them. I have like 10 McDonald's door sensors and like 10 doorbells so far

• 
  @boboso56764 ай бұрын

  @Dtr146 you might also get yourself an amplified board like the flux capacitor for better reach