I'm David and welcome to Deathproof Productions. I'm a certified Harley Davidson mechanic, certified welder, certified millwright, a gunsmith, and a fine connoisseur of good-ass beer. With this channel I plan to pass on my 27+ years of experience wrenching on bikes, fabricating, reloading, shooting, and riding.
In 2014 I wrecked on my Heritage Softail without a helmet that left me with a severe TBI that affects my ability to consistently form new memories. Back in 2021, it occurred to me that after I have worked on a project I should keep a log of what was done. So I would have something to reference. After mentioning this to one of my sons he said "Well Dad, I know how to edit so we could just film it and put it on youtube and you could reference that. Plus it might be a way to help others."
So if you like bikes, guns, cinematic tutorials, and restoring old Harley's then consider Subscribing.
Пікірлер
Que chulada de arma amigo. Aunque sea de espérame tantito para cargar
...and thus met the fate of the American buffalo. 😥
Hermosa arma 🤩
I have one just like it.Wonderful weapon.
I agree.
The inner shoe is difficult to check, and WAY more difficult to replace if you want to keep the original pushrods. I wonder why Harley-Davidson didn't at least make the cam-to-cam connection gear-to-gear. I doubt that it would have added to the noise that much, and the amount of pinion run-out shouldn't matter.
The inner shoe really isn't that difficult, just lift it with a screw driver or something simular and check it out. The part of the shoe that would wear is gonna be facing towards the screw driver and Really it's not that much work to pull the push rods, just remove the tank and top of the rocker boxes then rockers but I personally prefer adjustable.
@@DeathProofProductions Pulling the gas tank, rocker covers, rockers, cam plate, tensioner, and then putting it all back together is a two-way job for an inexperienced, shade-tree mechanic, who is paranoid about forgetting something or messing something up! 😄
Remember it's just a lawn mower engine between our legs. Even if your going slow to make sure it's right it's not hard work just be cool and take your time, Really it's nothing to it.
Also watch my vids they show how to do the rockers, just go to the play list.
Hermosa arma..
Thanks
Une vraie beauté sésame rien à redire
Muito bom, 👏👍
Le bordel en France 🇫🇷 pour acheter des munitions sent permis peuffff… ta le droit d’acheter l’arme avec un ☝️ kit de munitions et poudre et amorce graisse mais après interdiction 🚫 d’acheter des munitions une fois que t’a usé tai munitions faut un permis ! 🪪 pour une carabine à plomb faudra le permis aussi si sa continue 😂😂😂😂😂😂😂 le gouvernement à tellement peur 😨 à une guerre civile ou soulèvement populaire qu’il on ramasser tout les armes non déclaré les moutons fil le fusil bé bé bé oui 😂😂😂😂😂😂😂😂
Shooting: 2 seconds Reloading: 2 minutes
Very true.
Big bore ,44! The magnum of the time. Big saddle gun.
С това ли избихте бизоните на индианците???? 🤮🇺🇲👿🤮🇺🇲👿🤮🇺🇲👿
Rewolwer mu się wyrewolwerował
Do you have any experience with the percussion caps just falling off while the cylinder rotates?
Yes, some brands of nipples are not really the right size for certain brands of caps. Older Italian brands were more know for this. Remington caps I've had really good luck with, they have a little better design than some others. One trick I have used on loose caps is to pinch them on the end just a little than put them on ,lets them hold a little more tension.
The legend
😵💨面倒くさい・・・・・。
The design on the weapon is very beautiful
I agree
The big iron himself
I actually think I might tackle this on my own. Thank you sir
It's easy.
I have a 2011 superglide with a hd screaming eagle intake, fp3 fuel pack, and Vance and Hines big shots (although I might make the change to a bassani road rage 2). The bike already feels like it pulls good to me but since the cams will give me more power I want to do that upgrade. Do you happen to have any recommendations on what cams would be a good fit? Thanks
What riding style do you do most of the time.
Not sure if this answers the question correctly but I like low to mid range power the best. I Like quick acceleration. I just got the moons 3/4 turn throttle and I like the quicker response.
I thought to begin with he was building a squirrel death machine 😂
Hermoso!!!
Thanks
Я подумал вначале что это Кольт Уокер
There very simular looking
Protip, get a tub of crisco and smear a fingers worth over the chambers to ensure you never lose fingers to a chain fire.
Thanks
Gonna send some Tylenol PM down range
You know what they say waste not want not.
Bella pistola io o un fucile cosi
#1 Never put your finger inside the trigger guard unless you have a positive aiming. #2 Never cowboy shut the cylinder. Push the center of the cylinder firmly with your weak hand thumb. #3 Watch Jerry Miculek videos at least 3000 times. An example of how revolvers should not be treated in this manner.
#1 It's a video and KZread makes us edit shorts to only 60 seconds I drew the gun that was pointed down my range and fired, just chose not to use the footage of me shooting double action.. #2 it's not a watch, it won't break closing it like that once every 10 years that I take it out to shoot it. What if I was in a shoot out closing it slow would defeat the purpose of the speed loader. #3 stop wasting your time watching video's and go out and practice and you can win state and national championships like me and Jerry. An example of how not to comment
👍👍💪
Можно двойной зарядки сделать😮, во пуля полетит😮😂
M-16
Моя прелесть.хочу
What is this, a Wal-Mart commercial?
What you meah
Joking ,when you lay out the gun powder one bottle is a wall mart prescription bottle. I like the older gun's, always interesting.
Yeah I use my old prescription bottles for my bullets I cast
You can guess how many I have in my barn, some kind of leafey substance!?!
ده انا ممكن اتصاحب على اللى حقتله فى المده دى
Eta bacamarte lindo! 🤩💥
А чо в это время делал лявша Расейский, блоху насильничал
Walmart logo on that box is something
With the twin cam Harley should have put in better cranks that were straight and stayed straight and used gear drive from the factory.
N'oubliez pas de graisser les devant du barillet car il se peut que deux chambres partent ensemble...suif ou graisse sur les balles😢
Just like that...looks like Billy Jack. Cool.
POV: Red dead redemption
Thanks took alot of work to get that scene
@DeathProofProductions you are welcome
Funny thing is my name on gunbroker is red dead revolver.
Nice
"completely miss and nail the neighbours dog because it's a smooth bore"
It's not a smooth bore and I live on 100 acres of land.
O lindo do revólver eh o estralado do gatilho único 👏🏾👏🏾👏🏾👏🏾
Yep
Not very bright
What you mean.
@@DeathProofProductions Not the way to handle a revolver. You are just a show off.
What do you mean.
Dumb ass for flipping cylinder close.
Beautiful.
It only takes one shoot to end the fight against one opponent
Oooh it’s even got the engraved cylinder, nice
Thank you for all your tips and education!!
Thanks for the compliment means alot to know your work is appreciated.
I winder if you could just carry around 3 extra cylinders? Similar to carrying extra mags, but older.
from the reading i have done over the years some people used to during the civil war.
Shaky much
loaded its a 5.5 pound gun almost as much as a sporter hunting rifle and im holding it with one hand, using the other to hold the camera and still made good hits at 25 yards.
Most stupid gun ever made.
what's the reason you say that.