I started this channel doing guns and ammo purchases and reviews. Over the past several years I made the majority of those videos private and have mainly focused on farm and vegetable related videos.
91970 Ford 4000 Diesel and I absolutely love it energy loader on it but the loader is like way too big for it so I'm going to take that off and put it on my 895 International 4-wheel drive I think definitely be better fit but my brother's birthday brand new in 1970 same year I was born
@brianhamisigovinda25252 ай бұрын
I like and I need to buy ford 4000
@brianhamisigovinda25252 ай бұрын
Am interested, price?
@gleanerk3 ай бұрын
Wid a stick lol
@gleanerk3 ай бұрын
That is interesting coz !
@randhirmaan50323 ай бұрын
I needed ford 4000 made in England tell me
@SunsetBayBonnie4 ай бұрын
wow nice lot of plants! We still having frosts here. The day before yesterday was about 20 on the overnite.
@rodder20464 ай бұрын
Most of those flowers were started back in February. I watched after the greenhouse for 9 days back in March while my friend and his family went on a cruise. We have recently had a few overnight lows in the lower 30's with light frost. Typically our last frost date is April 15th. The greenhouse holds heat fairly well and the heater is set at 48 and fortunately it rarely comes on.
@gleanerk4 ай бұрын
Hello Rodder !
@rodder20464 ай бұрын
Hey cuz !!!
@jankotze19594 ай бұрын
Beautiful 4000, you bought a life time runner
@jankotze19594 ай бұрын
beautiful 4000, you bought a lifetime runner
@jamesguschke93387 ай бұрын
Can any one please tell me if the z145 uses positive ground? Battery was hooked up “backwards” when I found it.
@rodder20467 ай бұрын
All 12 volt systems that I have ever encountered had a negative ground.
@rodder20467 ай бұрын
What tractor model and year with the z145 are you asking about?
@jamesguschke93387 ай бұрын
@@rodder2046 sposed to be a 1975 massey ferguson 135
@JohnHBatte8 ай бұрын
Why is everyone without their colters? Seriously plows are twice as hard to pull and do rougher job.
@rodder20468 ай бұрын
We have 3 moldboard plows. Only one has coulters. If I had coulters for the other 2 plows I would use them. The plow in this video was bought new by my grandfather in 1953. Dad said that my uncle took the coulters off in the late 1950's and has no idea what my uncle did with them.
@brianmarshall16379 ай бұрын
I use a 1967 Massey Ferguson regularly on my stable in the Rossendale Valley East Lancs England.
@davidrice99029 ай бұрын
Have had my 4000 for over 25 years. Great for hay, roads and just about anything else. Take care of her and your grandchildren will enjoy her. They don't build them like that anymore
@gleanerk9 ай бұрын
A nice evening stroll “ seat time”
@gernotzemanek85310 ай бұрын
A strong tractor, I liked the one I had.
@user-os5ro8dx1i Жыл бұрын
Men i got 4600 ford tractor tings a beast
@ImranKhan-vk6sn Жыл бұрын
I like and I buyer tractr 4000
@SoybeanFarmer3300 Жыл бұрын
You can fix that it's just a bunch of nuts and bolts to take it down then there's a couple of O-rings and then it's the same nuts and bolts to put it back together. 🙂🙏🙂 Thanks for the video good to see you here🙂
@rodder2046 Жыл бұрын
I've got a service manual ordered but I have looked at a couple of parts diagrams on the ole inner web here and it looks like a pretty simple setup. I'll try and have her fixed before I start clipping the pasture later this summer. Thanks for stopping by.
@hesa3656 Жыл бұрын
Thank You Sir! Those '29 Ford wheels look solid. 👍🇺🇸
@rodder2046 Жыл бұрын
The old trailer has been stored in a shed for most of it's life. Otherwise I'm sure those spokes on the wheels would have rusted out years ago. Thanks for stopping by.
@gleanerk Жыл бұрын
👍🏻✌️🇺🇸👋
@gleanerk Жыл бұрын
A little age going to have some issues, but thankfully it can still be fixed ! Enjoyed watching buddy!
@rodder2046 Жыл бұрын
Until I remove that panel I really am not sure where the leak is. It could be an internal seal leaking and is pushing the fluid out the weep hole. A line might have a hole rubbed in it. Or the lower seal in the steering sector could be bad. What ever it is it should not be a difficult fix. Take care my friend.
@REDOCTOBEER74 Жыл бұрын
Sup Rodder
@rodder2046 Жыл бұрын
Hey Red
@SunsetBayBonnie Жыл бұрын
reminds me of my fathers old tractor. we had a bull an my pony on the farm my father worked at, but at our own farm, we had chickens, grapes and veggies. seeing your tractor made me think of it, a long time ago lol
@rodder2046 Жыл бұрын
I was 9 years old when this tractor was built. I also have some fond memories of those early years of my life. It's great to hear from you. Take care and god bless.
@SoybeanFarmer3300 Жыл бұрын
When I bought my Ford 4000 they saw me coming they had just finished painting the tractor and covered up a multitude of issues and problems that I later addressed. But back in 1997 when I bought that little 4000 I didn't know any better but we learned a lot as we were fixing things. 😊☕🧰🧰🧰🧰
@rodder2046 Жыл бұрын
I've been took to the cleaners so to speak a few times over the years myself. I'm to the point now where fresh paint makes me a bit suspicious that the seller is trying to hide something. It's great to hear from you my long time friend. And I also want you to know that you are still in my prayers. Take care of yourself and may god bless you and your family.
@SoybeanFarmer3300 Жыл бұрын
@@rodder2046 thank you very much for keeping me in your prayers. I went last Friday for the first CT scan to determine if the treatments were effective the doctors reported there had been a 50% reduction in the size of the tumor🥳🥳🥳 The next treatment plan has been laid out but in my mind God has the final word thank you very much for continuing to pray for my 100% recovery, my longtime friend. 🙂
@lewismcpeake2211 Жыл бұрын
Nice!
@rodder2046 Жыл бұрын
The next time you come over to grandmother and granddaddy's I'll let you take her for a little spin.
@gleanerk Жыл бұрын
Looks to be in great shape!
@rodder2046 Жыл бұрын
So far all I've found is a couple of minor leaks and and a missing bolt or two. I'm gonna work her a bit before I service the fluids and filters. When I get a chance I'd like to go over her with some polishing compound. I'm pretty sure that old original dull paint has just a bit of shine left in it.
@RodderFiles Жыл бұрын
i bet that comes in handy, good to hear from yah brotha Merry Christmas just incase ;)
@rodder2046 Жыл бұрын
Hey Kenny. Merry Christmas brother
@SoybeanFarmer3300 Жыл бұрын
Thanks for sharing the story on how you ended up with the piece of equipment.
@rodder2046 Жыл бұрын
Thanks for stopping by
@johnhayes3111 Жыл бұрын
Case Ih 1300 I had one good mowers
@rodder2046 Жыл бұрын
After looking at several pictures online I do believe that is what we have. The old New Holland dealer is also a Case IH dealer. That would explain why the former owner bought a new cutter bar there. Thanks !!!
@vborg001 Жыл бұрын
I still use my old 9' sickle mower, works great for trimming around ponds and fence rows.
@rodder2046 Жыл бұрын
They are still very useful machines.
@gleanerk Жыл бұрын
Hope it turned out well 👍🏻👋🇺🇸✌️
@SunsetBayBonnie Жыл бұрын
nice to 'see ' you again.
@rodder2046 Жыл бұрын
Hello Ms Bonnie. Good to hear from you !!!
@badbilly429 Жыл бұрын
Pro tip- if you have to use rtv on something permatex makes a product called “the right stuff” and it works! 12 years as a auto shop service manager talking!
@rodder2046 Жыл бұрын
It has been so long since I have used that I had forgotten all about it. Yes Permatex "the right stuff" works .
@metthem88 Жыл бұрын
Good to hear you again. Life can be a bitch at times. Keep on keeping on.
@rodder2046 Жыл бұрын
Hey , what's up man. Good to hear from ya.
@buckbuster6213 Жыл бұрын
Welcome back!
@rodder2046 Жыл бұрын
Thanks buckbuster. Good to hear from ya !!!
@T.A.B.Videos Жыл бұрын
Welcome back
@rodder2046 Жыл бұрын
Thanks Mr Don. Hope all is well with you !!!
@vborg001 Жыл бұрын
Good to hear from you my friend, thanks for the update!!
@rodder2046 Жыл бұрын
Hello my friend. Good to hear from you as well !!!
@badbilly429 Жыл бұрын
Good to see you around sir! Sorry about the trials and tribulations and health issues for your family!
@rodder2046 Жыл бұрын
Thanks Billy. You never know what life will throw at you some times. Thanks for stopping by.
@PopsQuest Жыл бұрын
Good to hear from you! Beautiful scenery there my friend
@rodder2046 Жыл бұрын
I haven't been commenting but I have keeping up to date on your videos. Thanks brother !!!
@indyme2 Жыл бұрын
Life comes at you hard and fast sometimes. Glad you are hanging in there. BTW, our garden wasn't too good this year. Still don't understand why. We'll do better in 2023.
@rodder2046 Жыл бұрын
Yes it does my friend. My garden was excellent this year. But due to family obligations I was only able to harvest about 25% of it. I told numerous folks to just come and take what they wanted. Unfortunately only one person stopped by so most of my garden went to waste this past summer. Good to hear from you !!!
@SoybeanFarmer3300 Жыл бұрын
Got a cool evening Wind out of the North here right now supposed to get down to about 30° here tonight. I am delighted you're dad decided to get up out of that bed and tell himself he was not sick anymore. So many of our problems come from what we let come out of our mouth. It pained me greatly in that last video to actually let the words "I'm sick" come out of my mouth. But it was the truth the doctor agreed with me and the antibiotics have done me some good so I'm on the road to recovery. I'd look forward to the stories concerning how you acquired equipment sometimes they're almost unbelievable, I know my dump truck story is. Take care my friend, sure glad to hear from you🙂
@rodder2046 Жыл бұрын
I do believe that they forecasted 25 to our low for tonight with a small chance of rain for the next few days. Glad to hear that you are feeling better. It took a few days but I'm almost back to feeling 100% healthy. Take care my friend and thanks for stopping by.
@Motorman-dl1sc Жыл бұрын
Good to see you On you tube Family has priority Good to here your dad doing ok sorry to here your mother in law passed Do verify On your channel not Justin's that is what I do Take care my friend
@rodder2046 Жыл бұрын
Good to hear from you my friend. My old computer was compromised severely. I am posting from a spare computer that will be "wiped" as soon I'm done posting on this channel. I have a brand new computer that is set up but not linked to any of my old accounts. I am hoping that I can move most of my previous videos to my new channel. It remains to be seen if that is possible. So until I get the new channel up and going I will be posting here. Thanks for stopping by my friend .
@Motorman-dl1sc Жыл бұрын
ok when you get your new channel up post video here I your old channel to let us know where Your new channel is
@rodder2046 Жыл бұрын
@@Motorman-dl1sc I plan on posting up more than one videos as to where you guys can find me in the future.
@gleanerk Жыл бұрын
Good to hear from you!
@rodder2046 Жыл бұрын
Thanks my friend. Glad you stopped by to say hello.
@suttonsplash14 Жыл бұрын
Well.. time to start eating squirrels lol
@tgdr73472 жыл бұрын
Nice!
@richardnix1362 жыл бұрын
It that plow 3 16"
@rodder20462 жыл бұрын
yes
@turkeyman4102 жыл бұрын
It doesn't take much to keep blades clean. Mine doesn't have scrapers but I have cable looped loosely around the frame and axle between each disk. Works great. Just an idea
@danagoglia14062 жыл бұрын
Great tractor! What type of soil is that? I'm in Tennessee and I have the continental z145 in my 135. It's all clay soil and I'm wondering if my massey can pull it through the clay.
@rodder20462 жыл бұрын
Your 135 has the same horsepower but it weighs about 500 pounds less than a 150. I was plowing in what we call sandy loam soil (about 40% sand). But we have some pure clay soil in a few places on the farm. The 150 would pull through the 3 bottom ok, but the 165 that we had would pull through with no problems. However, dad has a MF 245 which is about the same as a MF 135, just a little newer. It has no extra weigh (fluid) in the rear tires and it just will not pull that 3 bottom plow very deep. So if I am going to plow in clay soil with the 245 I always use a 2 bottom plow. Back about 20 years ago I had a 135 that had fluid in the tires. It would pull the 3 bottom plow just fine. I guess what I'm trying to say is if you are planning on doing a lot of deep plowing you need to have fluid in the rear tires and/or rear wheel weights if you are going to use a 3 bottom plow. Even a 2 bottom plow is hard pull sometimes in clay soil without the extra weight in the tires. Thanks for watching and I hope my info was helpful !!!
@danagoglia14062 жыл бұрын
@@rodder2046 thanks for that reply. All 4 tires have fluid in them. I have a 2 bottom that I will try in the clay. Hope it pulls with no problems.
Пікірлер
91970 Ford 4000 Diesel and I absolutely love it energy loader on it but the loader is like way too big for it so I'm going to take that off and put it on my 895 International 4-wheel drive I think definitely be better fit but my brother's birthday brand new in 1970 same year I was born
I like and I need to buy ford 4000
Am interested, price?
Wid a stick lol
That is interesting coz !
I needed ford 4000 made in England tell me
wow nice lot of plants! We still having frosts here. The day before yesterday was about 20 on the overnite.
Most of those flowers were started back in February. I watched after the greenhouse for 9 days back in March while my friend and his family went on a cruise. We have recently had a few overnight lows in the lower 30's with light frost. Typically our last frost date is April 15th. The greenhouse holds heat fairly well and the heater is set at 48 and fortunately it rarely comes on.
Hello Rodder !
Hey cuz !!!
Beautiful 4000, you bought a life time runner
beautiful 4000, you bought a lifetime runner
Can any one please tell me if the z145 uses positive ground? Battery was hooked up “backwards” when I found it.
All 12 volt systems that I have ever encountered had a negative ground.
What tractor model and year with the z145 are you asking about?
@@rodder2046 sposed to be a 1975 massey ferguson 135
Why is everyone without their colters? Seriously plows are twice as hard to pull and do rougher job.
We have 3 moldboard plows. Only one has coulters. If I had coulters for the other 2 plows I would use them. The plow in this video was bought new by my grandfather in 1953. Dad said that my uncle took the coulters off in the late 1950's and has no idea what my uncle did with them.
I use a 1967 Massey Ferguson regularly on my stable in the Rossendale Valley East Lancs England.
Have had my 4000 for over 25 years. Great for hay, roads and just about anything else. Take care of her and your grandchildren will enjoy her. They don't build them like that anymore
A nice evening stroll “ seat time”
A strong tractor, I liked the one I had.
Men i got 4600 ford tractor tings a beast
I like and I buyer tractr 4000
You can fix that it's just a bunch of nuts and bolts to take it down then there's a couple of O-rings and then it's the same nuts and bolts to put it back together. 🙂🙏🙂 Thanks for the video good to see you here🙂
I've got a service manual ordered but I have looked at a couple of parts diagrams on the ole inner web here and it looks like a pretty simple setup. I'll try and have her fixed before I start clipping the pasture later this summer. Thanks for stopping by.
Thank You Sir! Those '29 Ford wheels look solid. 👍🇺🇸
The old trailer has been stored in a shed for most of it's life. Otherwise I'm sure those spokes on the wheels would have rusted out years ago. Thanks for stopping by.
👍🏻✌️🇺🇸👋
A little age going to have some issues, but thankfully it can still be fixed ! Enjoyed watching buddy!
Until I remove that panel I really am not sure where the leak is. It could be an internal seal leaking and is pushing the fluid out the weep hole. A line might have a hole rubbed in it. Or the lower seal in the steering sector could be bad. What ever it is it should not be a difficult fix. Take care my friend.
Sup Rodder
Hey Red
reminds me of my fathers old tractor. we had a bull an my pony on the farm my father worked at, but at our own farm, we had chickens, grapes and veggies. seeing your tractor made me think of it, a long time ago lol
I was 9 years old when this tractor was built. I also have some fond memories of those early years of my life. It's great to hear from you. Take care and god bless.
When I bought my Ford 4000 they saw me coming they had just finished painting the tractor and covered up a multitude of issues and problems that I later addressed. But back in 1997 when I bought that little 4000 I didn't know any better but we learned a lot as we were fixing things. 😊☕🧰🧰🧰🧰
I've been took to the cleaners so to speak a few times over the years myself. I'm to the point now where fresh paint makes me a bit suspicious that the seller is trying to hide something. It's great to hear from you my long time friend. And I also want you to know that you are still in my prayers. Take care of yourself and may god bless you and your family.
@@rodder2046 thank you very much for keeping me in your prayers. I went last Friday for the first CT scan to determine if the treatments were effective the doctors reported there had been a 50% reduction in the size of the tumor🥳🥳🥳 The next treatment plan has been laid out but in my mind God has the final word thank you very much for continuing to pray for my 100% recovery, my longtime friend. 🙂
Nice!
The next time you come over to grandmother and granddaddy's I'll let you take her for a little spin.
Looks to be in great shape!
So far all I've found is a couple of minor leaks and and a missing bolt or two. I'm gonna work her a bit before I service the fluids and filters. When I get a chance I'd like to go over her with some polishing compound. I'm pretty sure that old original dull paint has just a bit of shine left in it.
i bet that comes in handy, good to hear from yah brotha Merry Christmas just incase ;)
Hey Kenny. Merry Christmas brother
Thanks for sharing the story on how you ended up with the piece of equipment.
Thanks for stopping by
Case Ih 1300 I had one good mowers
After looking at several pictures online I do believe that is what we have. The old New Holland dealer is also a Case IH dealer. That would explain why the former owner bought a new cutter bar there. Thanks !!!
I still use my old 9' sickle mower, works great for trimming around ponds and fence rows.
They are still very useful machines.
Hope it turned out well 👍🏻👋🇺🇸✌️
nice to 'see ' you again.
Hello Ms Bonnie. Good to hear from you !!!
Pro tip- if you have to use rtv on something permatex makes a product called “the right stuff” and it works! 12 years as a auto shop service manager talking!
It has been so long since I have used that I had forgotten all about it. Yes Permatex "the right stuff" works .
Good to hear you again. Life can be a bitch at times. Keep on keeping on.
Hey , what's up man. Good to hear from ya.
Welcome back!
Thanks buckbuster. Good to hear from ya !!!
Welcome back
Thanks Mr Don. Hope all is well with you !!!
Good to hear from you my friend, thanks for the update!!
Hello my friend. Good to hear from you as well !!!
Good to see you around sir! Sorry about the trials and tribulations and health issues for your family!
Thanks Billy. You never know what life will throw at you some times. Thanks for stopping by.
Good to hear from you! Beautiful scenery there my friend
I haven't been commenting but I have keeping up to date on your videos. Thanks brother !!!
Life comes at you hard and fast sometimes. Glad you are hanging in there. BTW, our garden wasn't too good this year. Still don't understand why. We'll do better in 2023.
Yes it does my friend. My garden was excellent this year. But due to family obligations I was only able to harvest about 25% of it. I told numerous folks to just come and take what they wanted. Unfortunately only one person stopped by so most of my garden went to waste this past summer. Good to hear from you !!!
Got a cool evening Wind out of the North here right now supposed to get down to about 30° here tonight. I am delighted you're dad decided to get up out of that bed and tell himself he was not sick anymore. So many of our problems come from what we let come out of our mouth. It pained me greatly in that last video to actually let the words "I'm sick" come out of my mouth. But it was the truth the doctor agreed with me and the antibiotics have done me some good so I'm on the road to recovery. I'd look forward to the stories concerning how you acquired equipment sometimes they're almost unbelievable, I know my dump truck story is. Take care my friend, sure glad to hear from you🙂
I do believe that they forecasted 25 to our low for tonight with a small chance of rain for the next few days. Glad to hear that you are feeling better. It took a few days but I'm almost back to feeling 100% healthy. Take care my friend and thanks for stopping by.
Good to see you On you tube Family has priority Good to here your dad doing ok sorry to here your mother in law passed Do verify On your channel not Justin's that is what I do Take care my friend
Good to hear from you my friend. My old computer was compromised severely. I am posting from a spare computer that will be "wiped" as soon I'm done posting on this channel. I have a brand new computer that is set up but not linked to any of my old accounts. I am hoping that I can move most of my previous videos to my new channel. It remains to be seen if that is possible. So until I get the new channel up and going I will be posting here. Thanks for stopping by my friend .
ok when you get your new channel up post video here I your old channel to let us know where Your new channel is
@@Motorman-dl1sc I plan on posting up more than one videos as to where you guys can find me in the future.
Good to hear from you!
Thanks my friend. Glad you stopped by to say hello.
Well.. time to start eating squirrels lol
Nice!
It that plow 3 16"
yes
It doesn't take much to keep blades clean. Mine doesn't have scrapers but I have cable looped loosely around the frame and axle between each disk. Works great. Just an idea
Great tractor! What type of soil is that? I'm in Tennessee and I have the continental z145 in my 135. It's all clay soil and I'm wondering if my massey can pull it through the clay.
Your 135 has the same horsepower but it weighs about 500 pounds less than a 150. I was plowing in what we call sandy loam soil (about 40% sand). But we have some pure clay soil in a few places on the farm. The 150 would pull through the 3 bottom ok, but the 165 that we had would pull through with no problems. However, dad has a MF 245 which is about the same as a MF 135, just a little newer. It has no extra weigh (fluid) in the rear tires and it just will not pull that 3 bottom plow very deep. So if I am going to plow in clay soil with the 245 I always use a 2 bottom plow. Back about 20 years ago I had a 135 that had fluid in the tires. It would pull the 3 bottom plow just fine. I guess what I'm trying to say is if you are planning on doing a lot of deep plowing you need to have fluid in the rear tires and/or rear wheel weights if you are going to use a 3 bottom plow. Even a 2 bottom plow is hard pull sometimes in clay soil without the extra weight in the tires. Thanks for watching and I hope my info was helpful !!!
@@rodder2046 thanks for that reply. All 4 tires have fluid in them. I have a 2 bottom that I will try in the clay. Hope it pulls with no problems.
Looking good
Thanks Bro !!!