Hello ive been searching for a new armed shark balisong since i bought the kraken of this brand. I am searching for one around 60 bucks, and all youtubers recommend me the nautilus or other. But i saw the Replicant. Can you give me the name of some recommendations of the best armed shark knives in your opinión? Thanks, btw nice flipa man!❤
@Ambatufakingnat19 сағат бұрын
Does the di blade fit the b+ v4 handle without modification?
@OilyBalisongКүн бұрын
great video, but people please remember: NEVER CUT TOWARD YOURSELF
@user-yl3no8ct7e4 күн бұрын
Ok octane
@lukas98584 күн бұрын
Smoooooth
@darkangel9994 күн бұрын
I would like to see a vid on the DI Gaboon there isn’t one on hole KZread yet besides a short from bbksbalisong. Very curious to see if he managed to improve on some of the critic’s and also think it is his first full Balisong clone.
@SimonKnowsNothing5 күн бұрын
Stock tune??
@robinesch294 күн бұрын
@@SimonKnowsNothing nah, it’s tuned
@s_adrian22416 күн бұрын
What the fuck? The clones have better sound than the original.
@inres3736 күн бұрын
Dam bro don't cut your fingers
@alexanderlund-jackson68648 күн бұрын
do you know if there’s a way to get the b+ blade without the handles
@robinesch298 күн бұрын
@@alexanderlund-jackson6864 there is no way to buy it separately at this moment
@alexanderlund-jackson68648 күн бұрын
@@robinesch29 well that sucks… might put it on the bucket list though if it’s really that big of a step up from the AS trainer nami
@bruulbrainsmasher12108 күн бұрын
I just ordered the polished Di blade for my AS Nami. Any idea if the maker fixed the bushing issue the first batch had?
@alexanderlund-jackson68648 күн бұрын
not sure about the bushings but kotlin sent me a few extras with my order to be safe. hoping the polished finish means less pain getting it set up
@robinesch298 күн бұрын
@@bruulbrainsmasher1210 from what I’ve heard they fixed that right after the first few shipped orders. So you should be fine now
@vladx35398 күн бұрын
nice
@robinesch298 күн бұрын
Thanks
@Semga12 күн бұрын
16:06 he was a bit slow to pull out
@gynophobia-00216 күн бұрын
Where do you buy the hardware?
@robinesch2916 күн бұрын
@@gynophobia-002 it’s the original hardware, just polished
@Skwabadoodles17 күн бұрын
That custom krake raken looks fire
@DUCK-gq2hd20 күн бұрын
Its been 7 months and yet no one made this typa comparison but for nautilus
@robinesch2920 күн бұрын
@@DUCK-gq2hd that’s cuz the og nautilus is supposedly worse than the clone I guess. I’m definitely not wasting money on it 😂
@DUCK-gq2hd20 күн бұрын
@@robinesch29 dang then can you made between b+ and armed shark?
@robinesch2919 күн бұрын
@@DUCK-gq2hd im sorry but I probably won’t. I can make a video on just the armed shark naut but I don’t like the naut so much that I’ll order another one. But in my personal opinion the armed shark is the better one from what I’ve seen.
@DUCK-gq2hd19 күн бұрын
@@robinesch29 it's alright the choice is still yours so no problem at all
@kirop728 күн бұрын
Blade rub? Sounds like it's a perfect clone of a BRS product lol
@bangenkaram2748Ай бұрын
Which acid u used and concentration?
@robinesch29Ай бұрын
@@bangenkaram2748 at what point do you mean? At the start to remove the Ano? Titanetch
@bangenkaram2748Ай бұрын
@@robinesch29 thanks... Which acid and concentration used for polishing and which acid and concentration used before anodization? Best regards...
@spyroclone152Ай бұрын
Really debating on getting one of these guys to close my vacation. Considering you've got both, which do you think is better? The Madko or Tsunami by AS? I've been itching to get my first titanium balisong ... without paying grail level prices.
@alexblake1406Ай бұрын
Отлично 😎
@axguo2kАй бұрын
If you don't mind me asking, how did you get silver screws/pivots for your Armed Shark Tsunami?
@robinesch2916 күн бұрын
@@axguo2k sorry for the late reply, I didn’t see your comment. It’s the original hardware, just polished
@LdogflpАй бұрын
SSv3 is a good ti bali for 150
@bocomer2706Ай бұрын
So how do I get a tutorial on that tweak fan now? 😁
@robinesch29Ай бұрын
I could make one 😁 I feel confident in the trick so I don’t mind. I‘ll try to film it this weekend
@bocomer2706Ай бұрын
You are amazing. It's one of those tricks that the second I saw it, I wanted it. So far I've failed lol. I can rev fan but I can't do it continuously. I don't think that's a pre req is it? If so I'll start practicing
@bocomer2706Ай бұрын
You've actually helped me more than you know. And thank you. Aside from me setting out to learn the shortstop, parabolic, and tweak fan bc I saw you do it, the fact that you review clones has helped my choices at every step. I'm js, I appreciate your work and that you took the time to help me
@Light-bd1gmАй бұрын
che stile
@CrowFlipsАй бұрын
Does the Asgard zangetsu come with a trainer blade?
@robinesch29Ай бұрын
Yes, but I don’t recommend it. I tried that at first and didn’t like the flipping at all. Flips much better with the live Blade.
@-p0op0oАй бұрын
SUBBED! Do a review of the G10ST hom from B+ vs AS! :)
@dumChloeАй бұрын
I really like how the prysma looks the only experience I had with balisongs before is like a very cheap one from a random store that's basically only holding together with tape rn, barely flips and was just in a drawer for few years now so I want to get a nice balisong to try and get back into it, I can't decide between getting the vulp or prysma clone because I like the look slightly more but can't find many opinions on it, is there a big difference between them? and which one is better?
@rodent66Ай бұрын
there are other really good clones too, i dont really like the vulp because the crazy handle bias, and clones have better value
@rodent66Ай бұрын
the prysma might be the same handle bias idk i dont have it
@robinesch29Ай бұрын
I agree with rodent66. If you’re looking for your first good Bali that can also take a good beating I would recommend the armed shark kraken v3. It‘ll do you good and has a very standard balance. The prysma clone is nice but not grippy enough imo for a first good Bali.
@epicnoah2284Ай бұрын
wow i just did it lol
@patrick1700Ай бұрын
thx, often see this in IG reels to end combos, and tryed to replicate. i done it a view times randomly but couldnt figure it out how. this video helped a lot
@bocomer2706Ай бұрын
Thank you! Picked it up quicker than I thought. Now to drill it to muscle memory. Youre the man!
@bruulbrainsmasher1210Ай бұрын
Thank you for making this. I tried to figure it out when I saw it.
@hellojuggalosАй бұрын
bro this is easy and cool and fun. Thanks for teaching me a trick.
@benshaminflipsАй бұрын
Interesting, I have always done this trick using the method where you squeeze and twist both handles while throwing it. It is cool to see another way to do it though!
@robinesch29Ай бұрын
I didn’t even know you could do it like this 😂 I used to tre flip my phone this way and it kind of carried over to Balis I guess lol
@benshaminflipsАй бұрын
@@robinesch29 It's pretty cool how you can do the same trick in different ways 👌
@robinesch29Ай бұрын
@@benshaminflips yeah I think so too. I need some new tricks for my videos so I gotta hit up some of your tutorials now.
@benshaminflipsАй бұрын
@@robinesch29 hit me up if you have any questions 🫡
@Velo271Ай бұрын
W tutorial
@robinesch29Ай бұрын
Thanks G 🙏🏼
@leydeldecastro2716Ай бұрын
🤘🏻
@pez_flipsАй бұрын
Im just praying they release the AS false edge
@robinesch29Ай бұрын
Same bro. If it’s stonewash I’ll cop 100%. It’s also a good chance for them to rework the pivots and bushings to make them more like the real one as they did with the Madko
@pez_flipsАй бұрын
@@robinesch29 to fit real squid hardware would be nuts
@nguyenquanganhl2012Ай бұрын
I thought the DI blade is flase edge?
@pez_flipsАй бұрын
@@nguyenquanganhl2012 it is. I’m talking about armed shark releasing a full false edge nami blade and all
@nguyenquanganhl2012Ай бұрын
@@pez_flips yeah. No live blade at all
@bocomer2706Ай бұрын
Anyone know if the zippy stuff fits the as nami?
@robinesch29Ай бұрын
It does. You‘ll need the s35vn zippy inserts for it. It’s a bit snug but you can fit them. I have them too
@bruulbrainsmasher1210Ай бұрын
I have the AS Nami, where do I get the re-blade? Link?
@SkullFlipper15Ай бұрын
You can get it at the kolisong website
@robinesch29Ай бұрын
You can get it from kolisong. I can’t post links here but his IG is kotlin_balisongs
@jillrussell3593Ай бұрын
yo can I ask, how long did it take for you to get the as tsunami?
@robinesch29Ай бұрын
Depends on where you are located. To Europe mostly just 2 weeks max
@bocomer2706Ай бұрын
How do you only have that many subs? Wtf! You have amazing reviews on clones, and one of my favorite flows to watch. SUBSCRIBE PEOPLE! What is that aerial where it's a toss from open underhand to open normal? Must learn this.....
@robinesch29Ай бұрын
Thanks bro, means a lot 🙏🏼 I’m trying to work on expanding my truck portfolio to make the videos better. The trick you’re talking about is a parabolic I think. I could make a tutorial if you want
@bocomer2706Ай бұрын
I would love that if it's possible. I've been flinging my nami around all night trying to do it lol
@robinesch29Ай бұрын
@@bocomer2706the tutorial is up bro
@Hi_Im_DominikАй бұрын
Man i live in eu and for the price + shipment and import tax i could buy armed shark one xd cant wait to try it
@abdelilhmanfloresАй бұрын
I found out through this video that I was doing 2 spins and overshooting
@reddragongd7885Ай бұрын
What is the bias
@robinesch29Ай бұрын
Handle bias
@xmdani4165Ай бұрын
Verg nice video but what was that "china" voice lol 😂
@robinesch29Ай бұрын
Accidentally said Germany and had to cover it somehow 😂
@AtaBspАй бұрын
I was wondering if you could try installing a kraken trainer blade on the Madko. I'm curious about your thoughts on balance.
@TheLimitPointАй бұрын
I caved and ordered one lol. Thanks again for the vid. Do you plan to anodize your madko? I'm new to the process but I imagine the steel zen pins will have to be removed first?
@hellojuggalos2 ай бұрын
ayyy welcome back. A couple of your vids have helped me and i wanted to see a madko vid. I look forward to getting one.
@AbidinGubidik2 ай бұрын
nice vid and great tune on your rep. when i get that no tap after a week it starts to tap again
Пікірлер
Hello ive been searching for a new armed shark balisong since i bought the kraken of this brand. I am searching for one around 60 bucks, and all youtubers recommend me the nautilus or other. But i saw the Replicant. Can you give me the name of some recommendations of the best armed shark knives in your opinión? Thanks, btw nice flipa man!❤
Does the di blade fit the b+ v4 handle without modification?
great video, but people please remember: NEVER CUT TOWARD YOURSELF
Ok octane
Smoooooth
I would like to see a vid on the DI Gaboon there isn’t one on hole KZread yet besides a short from bbksbalisong. Very curious to see if he managed to improve on some of the critic’s and also think it is his first full Balisong clone.
Stock tune??
@@SimonKnowsNothing nah, it’s tuned
What the fuck? The clones have better sound than the original.
Dam bro don't cut your fingers
do you know if there’s a way to get the b+ blade without the handles
@@alexanderlund-jackson6864 there is no way to buy it separately at this moment
@@robinesch29 well that sucks… might put it on the bucket list though if it’s really that big of a step up from the AS trainer nami
I just ordered the polished Di blade for my AS Nami. Any idea if the maker fixed the bushing issue the first batch had?
not sure about the bushings but kotlin sent me a few extras with my order to be safe. hoping the polished finish means less pain getting it set up
@@bruulbrainsmasher1210 from what I’ve heard they fixed that right after the first few shipped orders. So you should be fine now
nice
Thanks
16:06 he was a bit slow to pull out
Where do you buy the hardware?
@@gynophobia-002 it’s the original hardware, just polished
That custom krake raken looks fire
Its been 7 months and yet no one made this typa comparison but for nautilus
@@DUCK-gq2hd that’s cuz the og nautilus is supposedly worse than the clone I guess. I’m definitely not wasting money on it 😂
@@robinesch29 dang then can you made between b+ and armed shark?
@@DUCK-gq2hd im sorry but I probably won’t. I can make a video on just the armed shark naut but I don’t like the naut so much that I’ll order another one. But in my personal opinion the armed shark is the better one from what I’ve seen.
@@robinesch29 it's alright the choice is still yours so no problem at all
Blade rub? Sounds like it's a perfect clone of a BRS product lol
Which acid u used and concentration?
@@bangenkaram2748 at what point do you mean? At the start to remove the Ano? Titanetch
@@robinesch29 thanks... Which acid and concentration used for polishing and which acid and concentration used before anodization? Best regards...
Really debating on getting one of these guys to close my vacation. Considering you've got both, which do you think is better? The Madko or Tsunami by AS? I've been itching to get my first titanium balisong ... without paying grail level prices.
Отлично 😎
If you don't mind me asking, how did you get silver screws/pivots for your Armed Shark Tsunami?
@@axguo2k sorry for the late reply, I didn’t see your comment. It’s the original hardware, just polished
SSv3 is a good ti bali for 150
So how do I get a tutorial on that tweak fan now? 😁
I could make one 😁 I feel confident in the trick so I don’t mind. I‘ll try to film it this weekend
You are amazing. It's one of those tricks that the second I saw it, I wanted it. So far I've failed lol. I can rev fan but I can't do it continuously. I don't think that's a pre req is it? If so I'll start practicing
You've actually helped me more than you know. And thank you. Aside from me setting out to learn the shortstop, parabolic, and tweak fan bc I saw you do it, the fact that you review clones has helped my choices at every step. I'm js, I appreciate your work and that you took the time to help me
che stile
Does the Asgard zangetsu come with a trainer blade?
Yes, but I don’t recommend it. I tried that at first and didn’t like the flipping at all. Flips much better with the live Blade.
SUBBED! Do a review of the G10ST hom from B+ vs AS! :)
I really like how the prysma looks the only experience I had with balisongs before is like a very cheap one from a random store that's basically only holding together with tape rn, barely flips and was just in a drawer for few years now so I want to get a nice balisong to try and get back into it, I can't decide between getting the vulp or prysma clone because I like the look slightly more but can't find many opinions on it, is there a big difference between them? and which one is better?
there are other really good clones too, i dont really like the vulp because the crazy handle bias, and clones have better value
the prysma might be the same handle bias idk i dont have it
I agree with rodent66. If you’re looking for your first good Bali that can also take a good beating I would recommend the armed shark kraken v3. It‘ll do you good and has a very standard balance. The prysma clone is nice but not grippy enough imo for a first good Bali.
wow i just did it lol
thx, often see this in IG reels to end combos, and tryed to replicate. i done it a view times randomly but couldnt figure it out how. this video helped a lot
Thank you! Picked it up quicker than I thought. Now to drill it to muscle memory. Youre the man!
Thank you for making this. I tried to figure it out when I saw it.
bro this is easy and cool and fun. Thanks for teaching me a trick.
Interesting, I have always done this trick using the method where you squeeze and twist both handles while throwing it. It is cool to see another way to do it though!
I didn’t even know you could do it like this 😂 I used to tre flip my phone this way and it kind of carried over to Balis I guess lol
@@robinesch29 It's pretty cool how you can do the same trick in different ways 👌
@@benshaminflips yeah I think so too. I need some new tricks for my videos so I gotta hit up some of your tutorials now.
@@robinesch29 hit me up if you have any questions 🫡
W tutorial
Thanks G 🙏🏼
🤘🏻
Im just praying they release the AS false edge
Same bro. If it’s stonewash I’ll cop 100%. It’s also a good chance for them to rework the pivots and bushings to make them more like the real one as they did with the Madko
@@robinesch29 to fit real squid hardware would be nuts
I thought the DI blade is flase edge?
@@nguyenquanganhl2012 it is. I’m talking about armed shark releasing a full false edge nami blade and all
@@pez_flips yeah. No live blade at all
Anyone know if the zippy stuff fits the as nami?
It does. You‘ll need the s35vn zippy inserts for it. It’s a bit snug but you can fit them. I have them too
I have the AS Nami, where do I get the re-blade? Link?
You can get it at the kolisong website
You can get it from kolisong. I can’t post links here but his IG is kotlin_balisongs
yo can I ask, how long did it take for you to get the as tsunami?
Depends on where you are located. To Europe mostly just 2 weeks max
How do you only have that many subs? Wtf! You have amazing reviews on clones, and one of my favorite flows to watch. SUBSCRIBE PEOPLE! What is that aerial where it's a toss from open underhand to open normal? Must learn this.....
Thanks bro, means a lot 🙏🏼 I’m trying to work on expanding my truck portfolio to make the videos better. The trick you’re talking about is a parabolic I think. I could make a tutorial if you want
I would love that if it's possible. I've been flinging my nami around all night trying to do it lol
@@bocomer2706the tutorial is up bro
Man i live in eu and for the price + shipment and import tax i could buy armed shark one xd cant wait to try it
I found out through this video that I was doing 2 spins and overshooting
What is the bias
Handle bias
Verg nice video but what was that "china" voice lol 😂
Accidentally said Germany and had to cover it somehow 😂
I was wondering if you could try installing a kraken trainer blade on the Madko. I'm curious about your thoughts on balance.
I caved and ordered one lol. Thanks again for the vid. Do you plan to anodize your madko? I'm new to the process but I imagine the steel zen pins will have to be removed first?
ayyy welcome back. A couple of your vids have helped me and i wanted to see a madko vid. I look forward to getting one.
nice vid and great tune on your rep. when i get that no tap after a week it starts to tap again
finalllyyy im happy too see u back
Welcome back bro