Пікірлер

• 
  @gabrielv.43589 күн бұрын

  I Expected to see it mounted and working

• 
  @gabrielv.43589 күн бұрын

  Incrivel

• 
  @gabrielv.43589 күн бұрын

  Wow its been 11 years! Nice video

• 
  @AyernSun16 күн бұрын

  Super merci, j'ai réussi a la refaire fonctionner

• 
  @rbagulha127 күн бұрын

  Robert: very good explanation - 10! Doubt: how can I lubrificate this clock oin order to have it working good - no delay? Help, Please?

• 
  @josemfalmeidaАй бұрын

  👍

• 
  @BeckyC-hz6er2 ай бұрын

  Best explained video for large wall clocks.

• 
  @godfreyhamshire2 ай бұрын

  A heartfelt thank you, for your detailed how to, I had one of these mechanisms get acid in it and after that it stopped working, I decided to take a chance and open it and give it a clean, after I opened it the whole thing fell into pieces on my desk. I was mystified as to how to put it back together. I managed to reassemble it, with the help of your video after cleaning the contacts. Again thank you very much for your explanation and the how to. Regards.

• 
  @francoisdaponte57963 ай бұрын

  Thank you Robert, I managed to repair my workshop clock! 🧐

• 
  @simonprice86383 ай бұрын

  I thought he might be a Kiwi, then he said Texta!

• 
  @Iamkdyt3 ай бұрын

  Thanks Man kudos to you 😊

• 
  @user-fr5b3w7343 ай бұрын

  Alarm Clocks clock

• 
  @bushdoctorheadgrowshop25334 ай бұрын

  why does the rotor moves in one direction. can i make it turn other way round!? Thanx!!!

• 
  @kevinngonzalez7834 ай бұрын

  Amazing video! It helped me with some issues inside the mechanisms. Thanks!

• 
  @XX_GGBOIZ_XX4 ай бұрын

  Very helpful, 5:07 shows the 2 prongs that connected to yhe battery, from there to the quartz circuit on his left hand which have 2 tin coated squares correspond to those pins, in my case the pad was scratched off but a quick retin the pads fixed the "dead" mechanism, also the prongs on the box needs to be push down instead of upwards (from my experience, not in the video) to ensure a good connection

• 
  @michaelantony63954 ай бұрын

  H-Bridge beautifully explained

• 
  @rivkiebenedikt29244 ай бұрын

  This video is amazing!exactly what I was looking for. Is the Arduino code still available anywhere?

• 
  @surendrakverma5555 ай бұрын

  Very good. Thanks 👍

• 
  @cyndykiolbasa51276 ай бұрын

  i have wires attached. Is that a problem?

• 
  @sobouljean-luc62737 ай бұрын

  Salutation i am french Can you explain me how to inverse the mecanisme movement of a clock thank you gratitude

• 
  @genna1creek7 ай бұрын

  Just fix mine.😂. Thanks man.

• 
  @venecovlogs49768 ай бұрын

  Todos los mecanismos son diferentes van en otras posiciones

• 
  @EmilySuiEmily8 ай бұрын

  complex to ABC 😀 Thank you!

• 
  @waffle_chair926910 ай бұрын

  That’s a shame, it was the taking apart bit, that k was wanting to see

• 
  @Doctor_Haeresys10 ай бұрын

  This video was made 9 years ago... but oh my THANK YOU DEAR FELLOW, thank you SO MUCH, I watched so many tutorials but you happened to be the only one who saved me and teached me to repair such t68 mechsnism! And to repair it I had to watch WHOLE video, trying to assemble it wrong way all along ahaha... but finally! It's an amazing feeling! I was really in a despair but - finally! It's a miracle! Thank you and bless you!

• 
  @creativeflame_11 ай бұрын

  Man thank you so much. My mom’s analog clock fell apart when changing the battery and I got everything else but couldn’t figure out those 2 bottom pieces. This was extremely helpful!

• 
  @PrantikNoor Жыл бұрын

  Thank you for your awesome explanation ♥

• 
  @meherbabagod3732 Жыл бұрын

  💕💕❤❤💘💘

• 
  @SuperLittleTyke Жыл бұрын

  The reason I'm watching this is to glean information about battery orientation when the battery compartment is not marked plus or minus. I have such a clock from IKEA with a clock mechanism just like in this video. I removed the old battery, then forgot about the clock for a few weeks. So some time later I wanted to reinstate the clock and got a new AA battery ready to insert. Usually this a matter of a second or two, but there was a problem. I could not see a + marking anywhere! I got a torch. I got a magnifying glass. No + symbol evident. Eventually I just put the battery in and hoped for the best. It didn't work. So I inserted the battery the other way around and the clock started working. But how can a manufacturer produce a clock mechanism without marking the + end? Weird. I have now put my own + marking on the case.

• 
  @sridharrajagopal Жыл бұрын

  Nicely done! 👏👏

• 
  @jakstrieder Жыл бұрын

  my kid popped apart a moment I have and need, no parts fell out because I caught it before he could open it fully but things got knocked loos and there's a little sliver clip I don't know how to find the location of. all the gears are in place but the clip must do something to help the second hand engage because it's not moving at all

• 
  @classydays43 Жыл бұрын

  Finally, an explanation I can get behind. As much as clockmakers and watchmakers hate quarts movents, it's hard not to acknowledge how elegant these simple mechanisms really are. I especially love that these things can run continuously for twenty years or more without any maintenance, and longer if it is, and still keep relatively accurate time for less than a few dollars.

• 
  @chrisball3634 Жыл бұрын

  Thank you. Very informative. Another point to note, is the battery contacts. Make sure they actually make good contact with with the circuit board. Mine were not. Bent the contact and away it went.

• 
  @jt9498 Жыл бұрын

  Unfortunately, your voice has a guttural tone to it that makes it difficult to hear you properly.

• 
  @AbhinavKumarSahai Жыл бұрын

  How does the Electromagnet Change the polarity when we a DC

• 
  @ManiVaradarajan Жыл бұрын

  Using your video I was able to fix an HR 1688 clock mechanism. Thank you!

• 
  @MacysShopLifter Жыл бұрын

  Fixed my mom's old clock. Thanks! Great video.

• 
  @bentayman Жыл бұрын

  I rebuilt my moms clock using this this vid ! Thanks

• 
  @CAPT742000 Жыл бұрын

  My clock runs slow. How can I speed it up?

• 
  @foilcap Жыл бұрын

  Thank you

• 
  @borisdzhanov5573 Жыл бұрын

  You spend,t you,rtime FOR NOTHING.

• 
  @majeedkoya1759 Жыл бұрын

  My old citizen clock was dead. I found its solenoid coil was open. I made coil and clock working. The problem it's battery draining very fast .lasting only 4 month.may be my coil is not sufficient. Please give me what is the normal coil resistance..thanks

• 
  @majeedkoya1759 Жыл бұрын

  Hello Robert can you please tell me what is the normal resistance of the solenoid coil

• 
  @johnfox9780 Жыл бұрын

  fantastic video.....chilled out, a really good walk through on how these work. Simple as......but omg how clever are the people who invent and MAKE these things!!

• 
  @billfurlow6941 Жыл бұрын

  Very cool... You Sir Are An Amazing Person... The Detail In This Video Is So In Depth And Very Easy To Follow.. Thank You For Taking The Time To Explain How The Clock Mechanism Works !!! 🙋👍💯

• 
  @noelaruldas1152 Жыл бұрын

  Thank you very much for your demonstration and explanation! The video is really helpful for it gives ideas about the function of small electronic circuit board in which quartz crystal resonator in a form of small tuning fork is connected and how the circuit board receives power from battery and causes the tuning fork to vibrate and then how the circuit converts the vibration into one second electric pulse and drives the peizo electric motor and drives the motion work of the clock (12 : 1 reduction gear train that drives the clock hands). So that people will no more get tempted to throw the old unfunctioning clocks into garbage or by the side of road but they get idea to repair and use the clock again.

• 
  @siddiqmasih533 Жыл бұрын

  Thanks for good guidence.

• 
  @pjj.5649 Жыл бұрын

  Thank you, very, very helpful!!!💯👍👍

• 
  @diannaflores1617 Жыл бұрын

  How do u remove it out of the clock 🕰

• 
  @lillyminutolo5716 Жыл бұрын

  For a error i used a 9v battery instead of 1,5v. For the seconds it goes. Now the watch not works. I've to change the cristal and capacitors or the clock engine (motor) is fault, dead?