Hey! I got almost the same built!! but for half the price. :p But to be fair, I already have the cooler (ASUS ROG Ryujin III), SSDs (Samsung 990 pro), PSU (Asus ROG THOR P2), Fans (Lian Li UNI TL) and the case (HYTE Y70) from my previous build. I simply got the CPU, MOBO, GPU, and the DDR5 rams for the new update. If you're building something this expensive, you should definitely invest in a cpu contact frame.
@xUltimatex9 күн бұрын
Capture card just came in, plan to record the benchmark video hopefully by next week! Recommend any games in particular that you want to be benchmarked.
@RakkinMuhtasib211 күн бұрын
Omg it’s my brother 😳
@user-ty4dm3ow4f15 күн бұрын
let me get that
@RetainedInnerG16 күн бұрын
I get nervous watching people put CPUs in and press on them lol.
@user-jh8ev6ul8p17 күн бұрын
Bryce Papenbook: Link Start
@Krang_Fart1118 күн бұрын
For a tip not as long clips and add transitions in between. Hope this helps 🎉
@WarCentralWT18 күн бұрын
Dad: DONT PUT THE GPU OVER THE BA.... nvm
@Kaelleonm491322 күн бұрын
any updates on this build? i have the same motherboard is it bad to use multiples m.2 nvme ssds on this board? i wanted to use a 2tb samsung 990 pro ssd on the cpu side nvme slot and two other 4tb m.2 nvme ssds on the 2 slots under which i think is on the motherboard chipset
@xUltimatex20 күн бұрын
Only problem I faced was with RAM, got new ones and went from 6400-7200 and it ran more stable. You should be fine using multiple m.2's. Currently, I run 2, but I avoided putting them in the 1st m.2 slot that's gen 5 nvme it cuts the GPU from 16gb to 8gb (from what I read). Aside from that, I faced so issues. Goodluck to you.
@Kaelleonm491319 күн бұрын
@@xUltimatex wouldnt it only cut the gpu if i use a gen 5 ssd? or will it do the same with a gen 4 ssd?
@xUltimatex17 күн бұрын
@@Kaelleonm4913 I forgot where I read it, however, I am pretty sure for as long as that lane is occupied by whtv gen it impacts the gpu.
@Cosmonaut.22 күн бұрын
welcome to another chapter of "things that i can't afford"
@Tatoebot23 күн бұрын
Look the same pc built again for the 1000th time nice.
@TMK89924 күн бұрын
You are going to quit for 3 years again?
@BenWilliamson-xh4et24 күн бұрын
Good Video. I'm not the one to get this in about 10yrs. I'm 3652 days old
@AliProo1919Ай бұрын
damn pc
@t-ks3zhАй бұрын
wowsers
@flaviog141Ай бұрын
Not really overkill at all, it is just high end consumer-grade hardware. Next step would be to invest in some proper watercooling parts, not an AIO. If done well it will significantly cut down the amount of fan noise and the hardware will run cooler as a bonus.
@JukkaMadonnaАй бұрын
congrats you can now play crysis
@xulifar4243Ай бұрын
bro got the top everything
@iikatinggangsengii2471Ай бұрын
they need to be 'assemblied' first though, still hasnt done and its been almost 2 years
@iikatinggangsengii2471Ай бұрын
out of the box they were just as bad as your typical budget devices
@gabrielplays511Ай бұрын
Kinda a overkill gaming pc for your first pc.... Good pc anyways.
@user-fl3ux4fq5wАй бұрын
죄송한데요. 주인님 제가 사실은 연구를 하는데요. 이건 한가지 안고 가세요. 사실은 컴퓨터 업그레이드 또는 컴퓨터를 조립 하잖아요. 그럼 어디든 컴퓨터 조립 이니까? 아무데서나 A/S 되겠구나 1년 무상 그런데 실제로는 컴퓨터 조립 에 관련된 법률이 사실은 분해 해서 A/S 검토 하잖아요. 그런데요. 커스텀 수냉 쿨러 조립 컴퓨터는 A/S 가 안되요. 또는 대기업 에서는 공장 출고가 된 제품은 업그레이드 조립 불가 에요. 고객 과실로 인한 것은 유상 으로 하겠데요. 그럼 진흥원 에서요. IMF 를 전화를 걸어서 상의하는데 장사 하는 분이 피해가 커요.
@drex024Ай бұрын
In brazil when a live here , all this setup cost R$15.000 (coin from brazil)
@kishoreabrahamАй бұрын
only thing, bend corrector is missing
@LEL7567-ABCDEFАй бұрын
mom, it's for study
@xUltimatexАй бұрын
Google classroom at 10,000 fps!
@user-dt8zv6bz6zАй бұрын
Hi, I am a 12 yr old boy who is building my own pc with a TUF 4070 rtx, AMD ryzen 7 etc And this video inspire me to
@ExplosiveTowel88Ай бұрын
Most normal corsair fan
@potatooooo650Ай бұрын
NO DONT EVER PUSH DOWN ON THE CPU OMG THATS WHAT THE METAL BAR IS FOR. IF U DO THAT AND U MESS A PIN UP CANT SAY I AINT WARN U
@xUltimatexАй бұрын
Thank you for this, got a lot of comments about pressing on the CPU. I didn't press it that hard and thankfully it's fine, but next time i'll let the metal bar to its job.
@potatooooo650Ай бұрын
@@xUltimatex thank you, with your hands you align the cpu and drop it in and make any adjustments to it to make sure it’s in, then take the metal bar and shove it down into the little hook.
@potatooooo650Ай бұрын
shoulda gotten a dual chambered case
@MattSS9Ай бұрын
2016.. This brings me many memories
@legendsofbouchmohsАй бұрын
See u xultmatex next 3 years later bye we well miss u so much 😢
@xUltimatexАй бұрын
Noooo :( I'll be back soon once I set up everything to benchmark!!!
@Diszzy2savvАй бұрын
Would this build be good with 98gb of ram?
@xUltimatexАй бұрын
You can run a whole companies database. Most definitely.
@sewercellАй бұрын
Not overkill
@Dishrag_vrАй бұрын
Tip: next time don’t press down on the cpu ,let it fall in it self
@winnik23Ай бұрын
I have the same screwdriver. everything else remains to be collected
@xUltimatexАй бұрын
That's progress! A screw driver can take you to lots of places.
@user-cf6yr9lg1cАй бұрын
your gonna have to reseat the ram your meant to push it down until the clips go into the notches
@ThebossreserveАй бұрын
Beautiful construction. Guys, I'm also building my first PC, I'm having doubts about which CPU to use, I know that both brands have qualities and defects, but is it safe to go with Intel even though I know that the 14th generation is gone?
@user-bz8sg8yk2gАй бұрын
go with amd, the 7800x 3D is the most powerful
@AkronicalMCАй бұрын
parents money
@tomorpedreiro3032Ай бұрын
shame about slow rams
@daddyfrank2010Ай бұрын
love it, would love to know cost of the build. waiting on Benchmark video
@xUltimatexАй бұрын
I'm trying to determine if I should get a capture card for the benchmark video or simply use the application. It would save performance getting a capture card but 4k60 or 120 costs a nice amount. If I make up my mind, I'll try to get the benchmark video out ASAP.
@xUltimatexАй бұрын
Total cost of the build I never calculated, but it was 6 thousand something Canadian dollars *before tax.
@official_exprismАй бұрын
that 4090 grafics card is like $2k 💀
@NixohcАй бұрын
okay ur point?
@mxvexluvsyou4326Ай бұрын
SICK BRO IM ALSO BUILDING MY PC TOMMOW WITH ALL THE NEW PARTS JS LIKE YOURS
@apherial394526 күн бұрын
How you liking the pc?
@corvus2663Ай бұрын
This should be enough for roblox :)
@xUltimatexАй бұрын
Definitely enough for roblox
@Helios.vfx.Ай бұрын
Cannot wait to get my build done, to learn at night and working in construction at day lol
@Helios.vfx.Ай бұрын
I'd go air coming any day
@mo0rkszz94Ай бұрын
I JUST FOUND OUT THE THING THAT COMES WITH THE GRAPHICS CARD ALSO DOUBLES DOWN AS A GODDAMN SUPPORT OMG AND IT'S ALSO AN SCREWDRIVER OMG
@michagysin3082Ай бұрын
you also have a tuf card?
@Helios.vfx.Ай бұрын
I'm gonna wait 5090 and 9950x
@xUltimatexАй бұрын
That's a good choice, wait a little longer and it will be so much more worth it.
@acey5804Ай бұрын
dream build right here
@hydraintel9498Ай бұрын
I literally have the same exact v build. Same case and even the motherboard😂
@rebeccamiron1820Ай бұрын
your fastest ssd should be in the slot m2_2 to be linked to the cpu and no to the chipset. Don't put anything in the slot m2_1 because it will cut the pcie lanes from your gpu in half (from 16 to 8). And connect the second 8 pin cpu cable to the motherboard.
@Helios.vfx.Ай бұрын
Even at 8 lines, the graphics won't ever be used way that'd ever be limited by it
@pachecooliveira427Ай бұрын
O cara faz um video de 15 minutos pra mostrar o pc montando por 2 segundos. Que merda em?
Пікірлер
Does the motherboard support XMP well with ram ?
Hey! I got almost the same built!! but for half the price. :p But to be fair, I already have the cooler (ASUS ROG Ryujin III), SSDs (Samsung 990 pro), PSU (Asus ROG THOR P2), Fans (Lian Li UNI TL) and the case (HYTE Y70) from my previous build. I simply got the CPU, MOBO, GPU, and the DDR5 rams for the new update. If you're building something this expensive, you should definitely invest in a cpu contact frame.
Capture card just came in, plan to record the benchmark video hopefully by next week! Recommend any games in particular that you want to be benchmarked.
Omg it’s my brother 😳
let me get that
I get nervous watching people put CPUs in and press on them lol.
Bryce Papenbook: Link Start
For a tip not as long clips and add transitions in between. Hope this helps 🎉
Dad: DONT PUT THE GPU OVER THE BA.... nvm
any updates on this build? i have the same motherboard is it bad to use multiples m.2 nvme ssds on this board? i wanted to use a 2tb samsung 990 pro ssd on the cpu side nvme slot and two other 4tb m.2 nvme ssds on the 2 slots under which i think is on the motherboard chipset
Only problem I faced was with RAM, got new ones and went from 6400-7200 and it ran more stable. You should be fine using multiple m.2's. Currently, I run 2, but I avoided putting them in the 1st m.2 slot that's gen 5 nvme it cuts the GPU from 16gb to 8gb (from what I read). Aside from that, I faced so issues. Goodluck to you.
@@xUltimatex wouldnt it only cut the gpu if i use a gen 5 ssd? or will it do the same with a gen 4 ssd?
@@Kaelleonm4913 I forgot where I read it, however, I am pretty sure for as long as that lane is occupied by whtv gen it impacts the gpu.
welcome to another chapter of "things that i can't afford"
Look the same pc built again for the 1000th time nice.
You are going to quit for 3 years again?
Good Video. I'm not the one to get this in about 10yrs. I'm 3652 days old
damn pc
wowsers
Not really overkill at all, it is just high end consumer-grade hardware. Next step would be to invest in some proper watercooling parts, not an AIO. If done well it will significantly cut down the amount of fan noise and the hardware will run cooler as a bonus.
congrats you can now play crysis
bro got the top everything
they need to be 'assemblied' first though, still hasnt done and its been almost 2 years
out of the box they were just as bad as your typical budget devices
Kinda a overkill gaming pc for your first pc.... Good pc anyways.
죄송한데요. 주인님 제가 사실은 연구를 하는데요. 이건 한가지 안고 가세요. 사실은 컴퓨터 업그레이드 또는 컴퓨터를 조립 하잖아요. 그럼 어디든 컴퓨터 조립 이니까? 아무데서나 A/S 되겠구나 1년 무상 그런데 실제로는 컴퓨터 조립 에 관련된 법률이 사실은 분해 해서 A/S 검토 하잖아요. 그런데요. 커스텀 수냉 쿨러 조립 컴퓨터는 A/S 가 안되요. 또는 대기업 에서는 공장 출고가 된 제품은 업그레이드 조립 불가 에요. 고객 과실로 인한 것은 유상 으로 하겠데요. 그럼 진흥원 에서요. IMF 를 전화를 걸어서 상의하는데 장사 하는 분이 피해가 커요.
In brazil when a live here , all this setup cost R$15.000 (coin from brazil)
only thing, bend corrector is missing
mom, it's for study
Google classroom at 10,000 fps!
Hi, I am a 12 yr old boy who is building my own pc with a TUF 4070 rtx, AMD ryzen 7 etc And this video inspire me to
Most normal corsair fan
NO DONT EVER PUSH DOWN ON THE CPU OMG THATS WHAT THE METAL BAR IS FOR. IF U DO THAT AND U MESS A PIN UP CANT SAY I AINT WARN U
Thank you for this, got a lot of comments about pressing on the CPU. I didn't press it that hard and thankfully it's fine, but next time i'll let the metal bar to its job.
@@xUltimatex thank you, with your hands you align the cpu and drop it in and make any adjustments to it to make sure it’s in, then take the metal bar and shove it down into the little hook.
shoulda gotten a dual chambered case
2016.. This brings me many memories
See u xultmatex next 3 years later bye we well miss u so much 😢
Noooo :( I'll be back soon once I set up everything to benchmark!!!
Would this build be good with 98gb of ram?
You can run a whole companies database. Most definitely.
Not overkill
Tip: next time don’t press down on the cpu ,let it fall in it self
I have the same screwdriver. everything else remains to be collected
That's progress! A screw driver can take you to lots of places.
your gonna have to reseat the ram your meant to push it down until the clips go into the notches
Beautiful construction. Guys, I'm also building my first PC, I'm having doubts about which CPU to use, I know that both brands have qualities and defects, but is it safe to go with Intel even though I know that the 14th generation is gone?
go with amd, the 7800x 3D is the most powerful
parents money
shame about slow rams
love it, would love to know cost of the build. waiting on Benchmark video
I'm trying to determine if I should get a capture card for the benchmark video or simply use the application. It would save performance getting a capture card but 4k60 or 120 costs a nice amount. If I make up my mind, I'll try to get the benchmark video out ASAP.
Total cost of the build I never calculated, but it was 6 thousand something Canadian dollars *before tax.
that 4090 grafics card is like $2k 💀
okay ur point?
SICK BRO IM ALSO BUILDING MY PC TOMMOW WITH ALL THE NEW PARTS JS LIKE YOURS
How you liking the pc?
This should be enough for roblox :)
Definitely enough for roblox
Cannot wait to get my build done, to learn at night and working in construction at day lol
I'd go air coming any day
I JUST FOUND OUT THE THING THAT COMES WITH THE GRAPHICS CARD ALSO DOUBLES DOWN AS A GODDAMN SUPPORT OMG AND IT'S ALSO AN SCREWDRIVER OMG
you also have a tuf card?
I'm gonna wait 5090 and 9950x
That's a good choice, wait a little longer and it will be so much more worth it.
dream build right here
I literally have the same exact v build. Same case and even the motherboard😂
your fastest ssd should be in the slot m2_2 to be linked to the cpu and no to the chipset. Don't put anything in the slot m2_1 because it will cut the pcie lanes from your gpu in half (from 16 to 8). And connect the second 8 pin cpu cable to the motherboard.
Even at 8 lines, the graphics won't ever be used way that'd ever be limited by it
O cara faz um video de 15 minutos pra mostrar o pc montando por 2 segundos. Que merda em?