Пікірлер

• 
  @kenneth_jensen2 күн бұрын

  Awesome review. So you know how to set the endpoints? 🙂

• 
  @FPVFRASHA4 күн бұрын

  you should have got the tbs fusion

• 
  @ResolandicAnimations14 күн бұрын

  Flew this rc and from my experience, it was pretty bad

• 
  @IamGygzАй бұрын

  Hi.just wanna ask. Did you just use hot glue on the wing extensions without any re enforcements?

• 
  @aqua_gt627Ай бұрын

  what material is the rim of the wheel?

• 
  @mad-b2642 ай бұрын

  Bruh you got a nice set up, I just got a t300 GT rs coz I wasn't getting any faster using the g920, Plus the t300 allow me to swop wheels, I want to know what it is like with a GT wheel, I am over the moon with the t300, I only SIM race in VR now, I can't do a TV screen again, AMS 2 is bad ass in VR, I only got a Quest 2 and a 12gb 3060, A WaveVR elite 5000mah battery strap allows me to sim race for hours with no uncomfortable feelings, AMS 2 is fantastic...

• 
  @mad-b2642 ай бұрын

  I am about to blip to the scrap yard, But I don't know if a regular car seat will fit my Rig The length is about 11 inches and width is between 13 inches and 17 inches, You couldn't tell me what the measurements is please...

• 
  @YenkTheTank3 ай бұрын

  Great video! Thanks for sharing! What’s the name of that extendable tripod/pedestal behind your racing seat?

• 
  @wilsonfrancis45723 ай бұрын

  Great rig! I think Simmagic is worthy of a look. Great quality and price with FFB almost on par with Simucube.

• 
  @FLYNVL3 ай бұрын

  Nice setup, how much has this setup cost you all up for the PC setup.

• 
  @CKone413 ай бұрын

  Probably about 5k

• 
  @user-bp9oj5ly1k3 ай бұрын

  Hello! Very nice setup video. Do you think that its good to buy fanatec base right now or wait a bit?

• 
  @CKone413 ай бұрын

  I wouldn't buy any fanatec gear at the minute

• 
  @reviewforthetube64853 ай бұрын

  Well let's say this, I'm the biggest fanstec supporters even got the dd+ I'm sure corsair will allow fanatec to do very very well. But even I decided to go with the alpha ultimate just because why not be safe? So my dd+ will be my backup unit now. Kind of sad because it's such a good base but they are also having tons of qc issues. Even the good units have issues. Even my ball bearings make a bit of noise and some coil whine which tbh idc about coil whine all brands have it. I hate that fanatec does all rma like there policy is to rma everything no matter what the issue is it's why they are in one of the situations they are in. Instead of knowing what or what isn't an actual defect. But yeah just saying be careful if you want to buy then just enjoy it and ignore everything else going on. If not then get you an alpha mini or something lol. Not gonna lie the alpha ultimate is better then the dd+ when dialed in and the alpha mini would be better then the lower offers of fanatec.

• 
  @Michael-pi8ps3 ай бұрын

  @@CKone41haven’t they been bought out already? It makes as much sense to buy Fanatec as it does to buy Elgato

• 
  @user-bp9oj5ly1k3 ай бұрын

  @@reviewforthetube6485 @CKone41 Do you recommend anything for under sub 900 euro for pedals GT3 kind of wheel adn some strong base? (please leave cammus how it is their shipping is 200)

• 
  @user-bp9oj5ly1k3 ай бұрын

  @@CKone41 Do you recommend anything for under sub 900 euro for pedals GT3 kind of wheel adn some strong base? (please leave cammus how it is their shipping is 200)

• 
  @headgrinder3623 ай бұрын

  insane

• 
  @876SIMSTREAMER3 ай бұрын

  Looking like we are mirroring each other. i have the same monitor, just cock the bmw bundle and now thinking to order the mackky wheel.

• 
  @rockybukus4 ай бұрын

  May I know long is the run time for a fullly charged battery?

• 
  @carterdavis51764 ай бұрын

  The zoom breathing is caused from having the smoothing setting rather high in gyroflow. This is the smoothest footage I've seen from this camera so far lol

• 
  @TokyoNightGirl-fk4cn4 ай бұрын

  💞Wow🤍🤍💜🤍💜💜💜💜

• 
  @BurntCarcus4 ай бұрын

  Decent quality!

• 
  @ryccahilser62994 ай бұрын

  Promo>SM 😞

• 
  @michaelmickoberhaus80094 ай бұрын

  Can you tell me where i can buy the head tracker module for these goggles?

• 
  @tombyrne11425 ай бұрын

  I can't get it to bind to my Jumper T-Lite with this protocol

• 
  @nikosmos78105 ай бұрын

  Vrai mais la jumper t14 a une meilleure prise en main... J ai des grosses mains 🙂

• 
  @kjkareemslim5 ай бұрын

  VERY GREAT RADIO I HAVE THE ELRS VER. THE TRANPARENT AND THE RECEIVERS ARE CHEAP $20 BUCKS

• 
  @Simlife1016 ай бұрын

  Can you give me some advice on settings angles and position of inverted pedals. I have the simagic p1000 inverted and never felt I have them positioned correctly?

• 
  @Ashley-tq5fj6 ай бұрын

  'promosm' 👊

• 
  @indieman68686 ай бұрын

  the shifter paddles are much better than BMW and the low weight is good for better ffb effects! For me, leather better als alcantara

• 
  @Vlamyncksken7 ай бұрын

  I needed a round wheel with funky switches. This is the only option as of today that's less than 700 euros

• 
  @single_cam91997 ай бұрын

  Vid on how to mount it

• 
  @MikaTarkela8 ай бұрын

  I'm receiving this wheel and the CSL DD 8nm set next week, can't wait!

• 
  @single_cam91998 ай бұрын

  How did you swap the clutch and gas on the v3’s

• 
  @CKone418 ай бұрын

  Really easy you just have to strip out either pedal

• 
  @thedave77608 ай бұрын

  Amazon tries to mug you off with the old crappy version fro £85. I found this new model there but it's £235. Could you post a link to the one you found please?

• 
  @CKone418 ай бұрын

  Yeah its £235 now the black Friday deal on it has ended

• 
  @ivangilbert1968 ай бұрын

  Do you prefer vr over your 3 screen setup for racing sims, or is it game dependant? Iv just got into dirt rally 2.0 on pcvr quest 3, which I absolutely love! I’m only using a Logitech on a desk but have just ordered a Fanatec cdsl bundle based on how much I enjoy vr dirt 2.0. Also like f12023 but not spent much time on it yet, was thinking I could skip the cost of triple monitor set up and just stick with vr, would I be missing out?

• 
  @CKone418 ай бұрын

  No much prefer playing on triples

• 
  @Nanoarciere8 ай бұрын

  yep realistic

• 
  @Voltomess8 ай бұрын

  I bought CSL DD 5Nm with BMW wheel ready2race combo I can't wait until I try that. I had G29 few years ago and then T300 GT I hope this one is better than T300.

• 
  @Silas-Cube8 ай бұрын

  That is insane value!

• 
  @Nick-mu9nx8 ай бұрын

  I built one with bits of wood. kzread.info/dash/bejne/gXylxrltgsy6YJc.html&ab_channel=Nick

• 
  @davidcupra49139 ай бұрын

  Yet everyone else loves it ha.

• 
  @CKone418 ай бұрын

  It's cheap tacky crap

• 
  @jhaybenztv259 ай бұрын

  whats the app ur using

• 
  @CKone418 ай бұрын

  Threw the drone away years ago

• 
  @gster1099 ай бұрын

  2:26 did you have to use a metal grinder?? it wont fit without grinding that piece off?

• 
  @CKone419 ай бұрын

  Yes I used a plasma cutter but a grinder will do

• 
  @terrybatterton30789 ай бұрын

  Why lighter this thing can fly in high winds due to the weight,your lightweight DJI toy feel drone would struggle,I have just watched a video on the DJI mini SE,that was embarrassing I’d personally compare that to to a£30 drone

• 
  @CKone419 ай бұрын

  The hubsan is utter garbage

• 
  @gster10910 ай бұрын

  Could you make a more indepth video on how you mounted it to your rig? I’d love to use an e9x seat. In the same vid you could show how you got power to work too. Thank you for this vid too.

• 
  @CKone4110 ай бұрын

  Hi mate sorry don't have the time to make a video on it

• 
  @gster1099 ай бұрын

  @@CKone41 no worries. Could you let me know what power supply you used to power the seat?

• 
  @CKone419 ай бұрын

  I just used a cheap 12v power supply from amazon

• 
  @lachlanattard308910 ай бұрын

  I got one and it is a good drone

• 
  @CKone4110 ай бұрын

  It's terrible

• 
  @DroopyLoops10 ай бұрын

  How much do you have invested in this whole rig? Minus the computer

• 
  @CKone4110 ай бұрын

  About 3000gbp

• 
  @ADX7711 ай бұрын

  The V2 makes it much harder to mount the throttle on the floor... I haven't figured it out yet.

• 
  @AndrewTSq11 ай бұрын

  there is a little plastic finger on the QR1 plastic that presses a switch in the wheel to make it low torque. You can cut it off if you dare :D but I would probably leave it on. Ive seen lots of reviews on this wheel, but had no idea about that it had the shifter light for example so thanks for the review. :)

• 
  @darkeldar1970 Жыл бұрын

  U r playing gt7 with fanatec?

• 
  @CKone418 ай бұрын

  Yes

• 
  @blakey271able Жыл бұрын

  I've just purchased one from fatstraps in America it worked out £30 to the UK which I thought was pretty good. Anyway anyone know if the dji version with the popper button would fit on the fatsharks hdo2 my thinking is it would be easier to install the trying to force the strap in the slot??

• 
  @FROZENPWR Жыл бұрын

  Has your SD card that came witg it failed yet?

• 
  @dexterk1902 Жыл бұрын

  Good lad how do you recline the seat ?

• 
  @GamerEnLinux Жыл бұрын

  one is basically a Laptop with sticks and buttons, the other one is a consol like experience and reliable... choose which one is that

• 
  @paulojamesminimoisaac7858 Жыл бұрын

  so you think rog ally isn't reliable?

• 
  @thegame8112 Жыл бұрын

  The steam deck and the asus rog ally are the same thing, have desktop mode and console mode in my opinion the asus is more reliable it just need updates in software, just as the steam deck in the start that was broke as hell.

• 
  @GamerEnLinux Жыл бұрын

  @@thegame8112 sure.

• 
  @spiritxblossom Жыл бұрын

  Purchased the other day regardless + the DD 5nm, can all of the buttons on the wheel be remapped? I saw some are for FFB changing but once I get it dialed in I am gonna try and get everything I'll need mapped to the wheel in iRacing.