You appear to have lost weight. Good coupler lock.
@MrTruckTVКүн бұрын
Thanks
@duggydoКүн бұрын
@@MrTruckTV Looking good. If I can ask, what diet did you use to get the results?
@markb.1259Күн бұрын
3:40- Is it me or is that trailer hitch latch NOT in the down and latched position??
@Rider.WhiteHorse3 күн бұрын
Despite not having the ,massive tow and payload numbers of other 2500 trucks, it is actually a class 2b vehicle which makes it a 2500.
@MrTruckTV3 күн бұрын
Except for full floating axle
@Rider.WhiteHorse3 күн бұрын
@@MrTruckTV a truck class is determined by GVWR not axles, which is why it's a class 2b vehicle.
@MrTruckTV2 күн бұрын
@@Rider.WhiteHorse I argued for years with Nissan that they should have put full floating axles on their HD and called it a HD 3/4 ton truck, it would have sold better. It has the same steering as a HD
@robertevans88125 күн бұрын
Hey! now for someone that doesn't have a tilting trailer, could i use this hitch to make my trailer angle less for loading? kinda like a "tilt-a-hitch"? hook the trailer up, jack the trailer up with the rhino hitch not pinned, pin it at a higher then needed height for loading and then lower the jack down and put pin back after loading?
@Smallppstillgethoes6 күн бұрын
I think the Frontier is one of the best Midsize trucks out right now. Tacoma is too pricey, Chevy has some reliability issues, and Ford might be comparable with the Frontier but it just got redesigned so who knows how it will do.
@rayray_x28 күн бұрын
Thats a subwofer under the seat behind you
@MrTruckTV8 күн бұрын
I think part of the Hard Body package
@cherieharvey51610 күн бұрын
I wonder if you could use something like this regular winch, to winch up a drum of 400lbs of corn in a corn feeder.
@mikemurphy995315 күн бұрын
Hey Chad..........smile!!!! :-)
@abacojack1320 күн бұрын
i have one but my ryobi drill will not raise my dump trailer. it lowers fine but wont raise.
@MrTruckTV13 күн бұрын
Hi, we only use Flex drill hammer drill for the most power
@garysarratt124 күн бұрын
Congratulations, God bless the Truck family!
@MrTruckTV23 күн бұрын
Yes, thank you
@PlayWaves124 күн бұрын
This was a really clever product. Unfortunately it seems backup cameras put it out of business.
@MrTruckTV23 күн бұрын
Yes
@2151abell24 күн бұрын
Watch you on TFL Mr Truck.... CONGRATS on the misses.... !
@MrTruckTV23 күн бұрын
Thanks
@spyder00006924 күн бұрын
Never considered a nissan before this generation. I am about due for a midsize truck and have looked at the frontier several times. The low payload is a bummer but the main thing that stops me is the old infotainment and cameras. I do like that is a slightly smaller truck compared to the others (but with more capability than a maverick). I heard there is a possibility of a refresh so I am holding off to see if 2025 frontier models bring anything new. Otherwise 2.7 ranger is probably going to take the win for me. Love the looks of the GM twins so they are not completely out of the running.
@MrTruckTV23 күн бұрын
I like the Colorado, then Ranger, then Frontier
@RonnN-gf8tm25 күн бұрын
I think shes great Kent...A wonderful young lady. Right On Bro..
@MrTruckTV25 күн бұрын
Thanks
@emmanuelcharles3825 күн бұрын
good to see you Mr and Mrs Truck.
@MrTruckTV25 күн бұрын
Thanks 👍
@Aarononautos25 күн бұрын
That is a great-lookin truck, IMO. I like the Hardbody look.
@MrTruckTV25 күн бұрын
I agree!
@johnoksys771325 күн бұрын
Congratulations on your Marriage
@MrTruckTV25 күн бұрын
Thank you so much 😀
@someguy4476Ай бұрын
Great product, horrible video.
@onefastcyclistАй бұрын
I own a 2019 PRO4X King Cab. The stock Hankook tires are not load rated - mine lasted about 20k pulling a 2,200lb trailer with a 300lb tongue weight. I upgraded with General Gatter AT tires. In addition, an Old Man Emu Suspension lifted the back of the truck 1" higher then the front; allowing it to set level when towing. The 4600 shocks that come standard on the PRO4X are much lighter them the OME units I replaced them with. They will last a lot longer when towing
@MrTruckTVАй бұрын
Good deal
@thomasjefferson3552Ай бұрын
can you make the display stay on tpms psi and not cycle?
@MrTruckTVАй бұрын
Yes
@thomasjefferson3552Ай бұрын
How are the ball sensors holding up? Considering installing on my 98 4runner without any tpms system
@MrTruckTVАй бұрын
Doing well, have them on my trailer. Customers saying how well they work on trucks
@thomasjefferson3552Ай бұрын
@@MrTruckTV ty for the update
@MrsineauctoreАй бұрын
Why is the camera so close? learn to use a zoom...
@nn431xru1Ай бұрын
Is she special? She sounds like a 5yr old.
@wurly164Ай бұрын
I've got a 2020 Ridgeline and it's great
@slmjake2 ай бұрын
Mr. Truck a long time fan of yours from your TFL work. This is a great video. But i wonder how the RAS compares to a full contact helper spring like the Hellwig product where you have two points of contact instead of one on the RAS? Bump stops dont excite me as the impact is localized on the axle tube. Seems like more springs and a hellwig sway bar are the best way to hamdle load safely
@MrTruckTV2 ай бұрын
Thanks, I'm a fan of RAS. On heavy duty trucks, they also help the empty ride from bouncing.
@RustyShackleford420952 ай бұрын
Mr Truck, thank you for your years of dedication. I prefer your reviews to TFL's frankly, you speak from experience, humility, and add a dash of comedy. I especially appreciate your being brand agnostic, I'm the same way.
@MrTruckTV2 ай бұрын
Thanks
@johnoksys77132 ай бұрын
Congratulations
@MrTruckTV2 ай бұрын
Thanks
@benjaminbrown71272 ай бұрын
hi
@MrTruckTV2 ай бұрын
Hi
@mitchaudet23942 ай бұрын
Good review. Congratulations Mr truck!
@MrTruckTV2 ай бұрын
Thanks
@garysarratt12 ай бұрын
Congratulations!!
@MrTruckTV2 ай бұрын
Thanks
@InstinctiveThinking2 ай бұрын
Congratulations to you and Carol, Kent! And a fantastic review as per usual!
@MrTruckTV2 ай бұрын
Glad you enjoyed it!
@RonnN-gf8tm2 ай бұрын
Right On. Congratulations Kent n Carol !!!
@MrTruckTV2 ай бұрын
Thanks
@RonnN-gf8tm2 ай бұрын
Right On Kent!!! A lovely young lady!! Congratulations Bro!!
@MrTruckTV2 ай бұрын
Thanks
@velikijoxotnik2 ай бұрын
Actually, Newton's second law is the conversation of momentum. The sum of forces is equal to the change in momentum over time. However, when mass is constant, it (Newton's 2nd Law) can be reduced to (sum of forces) = m (dm/dt) = ma. Sorry, I'm an aerospace engineer and was geeking out for a bit. The over simplification of Newton's 2nd Law is a bit of a pet peeve of mine. I got a haul gauge the other day, for use with my new 3/4 ton Chevy. I like it so far. I was a bit disappointed that the new '24 Chevy 2500 High Countrys are not in the Haul Gauge's database, and I had to calibrate it (the Haul Gauge) myself. It does seem to match up pretty closely with the weight of my empty truck and truck-and-trailer, from Cat Scale measurements. I like that the Haul Gauge can give you tongue weight, and you don't have to try to figure it out from the Cat Scale readings for the three axles (truck drive and steering, and trailer axle(s)). When you said that you had to do the acceleration test multiple times previously, when you were checking the truck weight, I believe that you were remembering the Calibration Test. In the Calibration process, you have to do low-accel, mid-accel, max-accel, a few times each. Then, once it's calibrated, you only have to do one mid-accel run to determine the weight of your truck.
@KyleBOLL12 ай бұрын
Love my 93- 5.2 4x4 i have had it since 2000 inherited it from my grandpa he bought it in 93 right befor the new models so no airbag no abs just old school
@gerardmacdonald71312 ай бұрын
I have been reading the reviews on this product and while most I’ve found were positive, some were a little negative. Based on Mr Truck’s review, I will purchase one here in Canada. I don’t know the man but having watched him on this site and the TFL site, my instincts tell me he is legit and would not promote or sell a substandard product.
@MrTruckTV2 ай бұрын
Thanks
@brentmcmahon81882 ай бұрын
I run 5100 Bilstiens shocks that are made for stock up to a 2 inch lift they ride a little rough but loaded they are the best on my 1 ton 4 door long bed dullay the Handel like the best road course truck out there and that’s a lot of fun !!!
@brentmcmahon81882 ай бұрын
My 1 ton dullay drives like a sports car if you tail gate me I will lite it up on exit ramps and they drive crazy trying to keep up with the dual lay and it’s funny as hell when they lose their shit trying to keep up with a dullay and they are bad ass on a drivers course ..
@Youtubeuser1aa2 ай бұрын
Ford tremor of suv
@yudey10002 ай бұрын
I'm glad to have the last generation 2024 xd pro4x loved
@1967TravisАй бұрын
very cool i bought 2017 pro 4x4 5.6 liter 8cyl etc it is an awesome truck 56 800 kms only 32000miles. it has tonneau not sure about factory goose neck on my truck bed but i do not know how to open close the tonneau cover? i can open locked tailgate but stumped at this option IT IS NOT ELECTRIC lol. it is a beauty truck it rules drivin round regina sk as there are more gm fords etc all lookin the same then comes the TITAN 4X4 TO KICKEM IN THE BALLS CREWCAB BLUE METTALIC AND ALL LEATHER INTERIOR TOW PACKAGE AND 360CAMERA. THIS THING IS A BEAST WHEN IM DONE MODDING THIS BEAST THE LIBERAL CRYBABYS GONNA BE SLAPPING THE HOOD OF MY TRUCK OH WAIT THEY DOIN THAT ALREADY I LOVE IT LIBERAL TEARS IN MY COFFEE.🦍🦍🦍🦬🦬🦬🦁🦁🦁🐷🐖🐽🐫🐪🐘🦣🦣TITAN PRO4X4 FOREVER I WILL DRIVE NISSAN TITAN FOR THE REMAINDER OF DAYS. CB PLUS POLICE SCANNER PLUS FRONT FULL BRUSH GRILLE OR BOTTOM GRILL COVER WITH SKID PLATE NOT SURE BUT ROLL BAR AND WINCH ALL THE THINGS IN A DECENT TRUCK EXCEPT THE MASSIVE BILL. 29K CDN FUNDS 56 THOUSAND KMS. TINT WINDOWS ETC.
@RonnN-gf8tm2 ай бұрын
Hey my friend.. how've you been...great video
@MrTruckTV2 ай бұрын
Hey Ronn, doing great. I'm getting married May 25. How are you doing
@RonnN-gf8tm2 ай бұрын
@@MrTruckTVHey Kent...And who is this fine young lady your marrying...im excited for you my brother!!.. iv been super busy at work
@RonnN-gf8tm2 ай бұрын
Congratulations Kent!! A big hello to Kent's young lady friend...soon to be Mrs Truck!!..Right On Kent!! - Ronn. Lot-3
@MrTruckTV2 ай бұрын
@@RonnN-gf8tm Thanks, we met on a dating site
@dustinmeier97532 ай бұрын
At 9:16, he STARTS getting to the point. You’re welcome.
@joshuacole82662 ай бұрын
Thank you very much!!
@goldeneagle_wld2452 ай бұрын
I have a 2008 nissan froomtier crew cab 4.0 i try to find somo for it but you're web site doesn't offer any for my truck
@MrTruckTV2 ай бұрын
Road Master has them for Titan but not Frontier
@goldeneagle_wld2452 ай бұрын
@@MrTruckTV thank you for your feedback
@allanulsby14333 ай бұрын
how about welding a nut on the existing jack and using a drill motor
@coryhartranft46333 ай бұрын
💃 *Promosm*
@LuisPerez-vy6bz3 ай бұрын
Thank you for sharing the video Sir! Much appreciated. I might have a question or two when it comes to these Sumo Springs. These look like the most straight forward and no drilling kit I’ve come across so far and I want to install them on my 2019 Coachmen Apex Nano, which has a dual axle. I’m not 100% sure whether I need to go with the 3000-5000 GAWR, or the 5000-8000 GAWR spring over axle configuration. Any guidance or advice would be greatly appreciated!
@joshr35013 ай бұрын
I have a 1992 short bed 103k miles now, Banzai Blue 318 magnum with the 42RH. I bought it to replace my 1992 Banzai Blue 8 ft bed with a 3.9 magnum and standar gear box that got rear ended
@Chris-ut6eq3 ай бұрын
Thanks for posting, was wondering how to add protection to the adj coupler.
@MrTruckTV3 ай бұрын
Great
@vette4life5183 ай бұрын
Just need to drill that tiny lock and you’re in.
@Chris-ut6eq3 ай бұрын
totally agree. lock is very easy to bypass. Hope version 2 is more secure, I need this type of product.
Пікірлер
Looks super stout!!
You appear to have lost weight. Good coupler lock.
Thanks
@@MrTruckTV Looking good. If I can ask, what diet did you use to get the results?
3:40- Is it me or is that trailer hitch latch NOT in the down and latched position??
Despite not having the ,massive tow and payload numbers of other 2500 trucks, it is actually a class 2b vehicle which makes it a 2500.
Except for full floating axle
@@MrTruckTV a truck class is determined by GVWR not axles, which is why it's a class 2b vehicle.
@@Rider.WhiteHorse I argued for years with Nissan that they should have put full floating axles on their HD and called it a HD 3/4 ton truck, it would have sold better. It has the same steering as a HD
Hey! now for someone that doesn't have a tilting trailer, could i use this hitch to make my trailer angle less for loading? kinda like a "tilt-a-hitch"? hook the trailer up, jack the trailer up with the rhino hitch not pinned, pin it at a higher then needed height for loading and then lower the jack down and put pin back after loading?
I think the Frontier is one of the best Midsize trucks out right now. Tacoma is too pricey, Chevy has some reliability issues, and Ford might be comparable with the Frontier but it just got redesigned so who knows how it will do.
Thats a subwofer under the seat behind you
I think part of the Hard Body package
I wonder if you could use something like this regular winch, to winch up a drum of 400lbs of corn in a corn feeder.
Hey Chad..........smile!!!! :-)
i have one but my ryobi drill will not raise my dump trailer. it lowers fine but wont raise.
Hi, we only use Flex drill hammer drill for the most power
Congratulations, God bless the Truck family!
Yes, thank you
This was a really clever product. Unfortunately it seems backup cameras put it out of business.
Yes
Watch you on TFL Mr Truck.... CONGRATS on the misses.... !
Thanks
Never considered a nissan before this generation. I am about due for a midsize truck and have looked at the frontier several times. The low payload is a bummer but the main thing that stops me is the old infotainment and cameras. I do like that is a slightly smaller truck compared to the others (but with more capability than a maverick). I heard there is a possibility of a refresh so I am holding off to see if 2025 frontier models bring anything new. Otherwise 2.7 ranger is probably going to take the win for me. Love the looks of the GM twins so they are not completely out of the running.
I like the Colorado, then Ranger, then Frontier
I think shes great Kent...A wonderful young lady. Right On Bro..
Thanks
good to see you Mr and Mrs Truck.
Thanks 👍
That is a great-lookin truck, IMO. I like the Hardbody look.
I agree!
Congratulations on your Marriage
Thank you so much 😀
Great product, horrible video.
I own a 2019 PRO4X King Cab. The stock Hankook tires are not load rated - mine lasted about 20k pulling a 2,200lb trailer with a 300lb tongue weight. I upgraded with General Gatter AT tires. In addition, an Old Man Emu Suspension lifted the back of the truck 1" higher then the front; allowing it to set level when towing. The 4600 shocks that come standard on the PRO4X are much lighter them the OME units I replaced them with. They will last a lot longer when towing
Good deal
can you make the display stay on tpms psi and not cycle?
Yes
How are the ball sensors holding up? Considering installing on my 98 4runner without any tpms system
Doing well, have them on my trailer. Customers saying how well they work on trucks
@@MrTruckTV ty for the update
Why is the camera so close? learn to use a zoom...
Is she special? She sounds like a 5yr old.
I've got a 2020 Ridgeline and it's great
Mr. Truck a long time fan of yours from your TFL work. This is a great video. But i wonder how the RAS compares to a full contact helper spring like the Hellwig product where you have two points of contact instead of one on the RAS? Bump stops dont excite me as the impact is localized on the axle tube. Seems like more springs and a hellwig sway bar are the best way to hamdle load safely
Thanks, I'm a fan of RAS. On heavy duty trucks, they also help the empty ride from bouncing.
Mr Truck, thank you for your years of dedication. I prefer your reviews to TFL's frankly, you speak from experience, humility, and add a dash of comedy. I especially appreciate your being brand agnostic, I'm the same way.
Thanks
Congratulations
Thanks
hi
Hi
Good review. Congratulations Mr truck!
Thanks
Congratulations!!
Thanks
Congratulations to you and Carol, Kent! And a fantastic review as per usual!
Glad you enjoyed it!
Right On. Congratulations Kent n Carol !!!
Thanks
Right On Kent!!! A lovely young lady!! Congratulations Bro!!
Thanks
Actually, Newton's second law is the conversation of momentum. The sum of forces is equal to the change in momentum over time. However, when mass is constant, it (Newton's 2nd Law) can be reduced to (sum of forces) = m (dm/dt) = ma. Sorry, I'm an aerospace engineer and was geeking out for a bit. The over simplification of Newton's 2nd Law is a bit of a pet peeve of mine. I got a haul gauge the other day, for use with my new 3/4 ton Chevy. I like it so far. I was a bit disappointed that the new '24 Chevy 2500 High Countrys are not in the Haul Gauge's database, and I had to calibrate it (the Haul Gauge) myself. It does seem to match up pretty closely with the weight of my empty truck and truck-and-trailer, from Cat Scale measurements. I like that the Haul Gauge can give you tongue weight, and you don't have to try to figure it out from the Cat Scale readings for the three axles (truck drive and steering, and trailer axle(s)). When you said that you had to do the acceleration test multiple times previously, when you were checking the truck weight, I believe that you were remembering the Calibration Test. In the Calibration process, you have to do low-accel, mid-accel, max-accel, a few times each. Then, once it's calibrated, you only have to do one mid-accel run to determine the weight of your truck.
Love my 93- 5.2 4x4 i have had it since 2000 inherited it from my grandpa he bought it in 93 right befor the new models so no airbag no abs just old school
I have been reading the reviews on this product and while most I’ve found were positive, some were a little negative. Based on Mr Truck’s review, I will purchase one here in Canada. I don’t know the man but having watched him on this site and the TFL site, my instincts tell me he is legit and would not promote or sell a substandard product.
Thanks
I run 5100 Bilstiens shocks that are made for stock up to a 2 inch lift they ride a little rough but loaded they are the best on my 1 ton 4 door long bed dullay the Handel like the best road course truck out there and that’s a lot of fun !!!
My 1 ton dullay drives like a sports car if you tail gate me I will lite it up on exit ramps and they drive crazy trying to keep up with the dual lay and it’s funny as hell when they lose their shit trying to keep up with a dullay and they are bad ass on a drivers course ..
Ford tremor of suv
I'm glad to have the last generation 2024 xd pro4x loved
very cool i bought 2017 pro 4x4 5.6 liter 8cyl etc it is an awesome truck 56 800 kms only 32000miles. it has tonneau not sure about factory goose neck on my truck bed but i do not know how to open close the tonneau cover? i can open locked tailgate but stumped at this option IT IS NOT ELECTRIC lol. it is a beauty truck it rules drivin round regina sk as there are more gm fords etc all lookin the same then comes the TITAN 4X4 TO KICKEM IN THE BALLS CREWCAB BLUE METTALIC AND ALL LEATHER INTERIOR TOW PACKAGE AND 360CAMERA. THIS THING IS A BEAST WHEN IM DONE MODDING THIS BEAST THE LIBERAL CRYBABYS GONNA BE SLAPPING THE HOOD OF MY TRUCK OH WAIT THEY DOIN THAT ALREADY I LOVE IT LIBERAL TEARS IN MY COFFEE.🦍🦍🦍🦬🦬🦬🦁🦁🦁🐷🐖🐽🐫🐪🐘🦣🦣TITAN PRO4X4 FOREVER I WILL DRIVE NISSAN TITAN FOR THE REMAINDER OF DAYS. CB PLUS POLICE SCANNER PLUS FRONT FULL BRUSH GRILLE OR BOTTOM GRILL COVER WITH SKID PLATE NOT SURE BUT ROLL BAR AND WINCH ALL THE THINGS IN A DECENT TRUCK EXCEPT THE MASSIVE BILL. 29K CDN FUNDS 56 THOUSAND KMS. TINT WINDOWS ETC.
Hey my friend.. how've you been...great video
Hey Ronn, doing great. I'm getting married May 25. How are you doing
@@MrTruckTVHey Kent...And who is this fine young lady your marrying...im excited for you my brother!!.. iv been super busy at work
Congratulations Kent!! A big hello to Kent's young lady friend...soon to be Mrs Truck!!..Right On Kent!! - Ronn. Lot-3
@@RonnN-gf8tm Thanks, we met on a dating site
At 9:16, he STARTS getting to the point. You’re welcome.
Thank you very much!!
I have a 2008 nissan froomtier crew cab 4.0 i try to find somo for it but you're web site doesn't offer any for my truck
Road Master has them for Titan but not Frontier
@@MrTruckTV thank you for your feedback
how about welding a nut on the existing jack and using a drill motor
💃 *Promosm*
Thank you for sharing the video Sir! Much appreciated. I might have a question or two when it comes to these Sumo Springs. These look like the most straight forward and no drilling kit I’ve come across so far and I want to install them on my 2019 Coachmen Apex Nano, which has a dual axle. I’m not 100% sure whether I need to go with the 3000-5000 GAWR, or the 5000-8000 GAWR spring over axle configuration. Any guidance or advice would be greatly appreciated!
I have a 1992 short bed 103k miles now, Banzai Blue 318 magnum with the 42RH. I bought it to replace my 1992 Banzai Blue 8 ft bed with a 3.9 magnum and standar gear box that got rear ended
Thanks for posting, was wondering how to add protection to the adj coupler.
Great
Just need to drill that tiny lock and you’re in.
totally agree. lock is very easy to bypass. Hope version 2 is more secure, I need this type of product.