Пікірлер

• 
  @MG-cd9ek2 күн бұрын

  Really would of helped if you mentioned the clips say top front and are thinner up top and thicker going downward which is why the clips must say top so the shelf slides down and stays in place. Spent all this time because the shelves kept falling through. Thanks ugh If your clips are old regardless what you try, they are not going to stay still. Avoid it it's awful

• 
  @MG-cd9ek2 күн бұрын

  The clips are sliding even when on proper notch these are crap once the clips get old this is ABSOLUTELY useless. I wouldn't buy these again for anything. Avoid it like the plague

• 
  @big.booty.judy.15 күн бұрын

  I’ve been banging on both sides. She’s STUCK. I’ll go try again lol.

• 
  @JamesP462018 күн бұрын

  Let's load DOUBLE the weight of the shelf rating and watch it fail. But lets also load it unevenly and STAND on the thing while doing it. Funny, there is no video of you loading one of your shelves the same way. Why is that?? Thank you for the demonstration, I will never buy form your company.

• 
  @cesarvazquez465819 күн бұрын

  Thank you 👍🏻

• 
  @nicolenorman742429 күн бұрын

  Any suggestions when the posts will not twist or budge?

• 
  @colouashaАй бұрын

  Thank you ! 😊

• 
  @eudymc58922 ай бұрын

  How to remove the bushing connectors when they are stuck inside the pole ?please

• 
  @ShelvingIncorporatedАй бұрын

  They might be cross threaded. They unscrew to the left; a gripping tool could assist, such as pliers or vice grips.

• 
  @larrysouders20602 ай бұрын

  Thank you

• 
  @harpirishdance2 ай бұрын

  I can’t put the second 90° angle in the corner. Theres not room.

• 
  @debonaire2573 ай бұрын

  Thank you. Very helpful! 😊

• 
  @jacshe32913 ай бұрын

  Can this shelf be double stacked with another shelf like this?

• 
  @BigFarm_ah3654 ай бұрын

  I have a set of the large casters, not the threaded ones. How do I remove the threaded insert that the leveling feet go into?

• 
  @rswow4 ай бұрын

  Seville Classic's 48" wire shelving -- is actually 47 13/16" (47.8125") as measured at home. Why don't they list the true width online? It matters cuz I need to buy another brand's shelves to fit into that and vice-versa. E.g. Style Selection's is listed online as 47.7". I wonder if the 0.1125" would make a difference in interchangeability between the two models.... I wish manufacturers would use a '48"' width that's compatible across brands!!!

• 
  @MARKHENSTROM5 ай бұрын

  Made it possible to disassemble what is quite possibly the single worst designed wire shelf on the market - IKEA's OMAR.

• 
  @heatherhoneyy5 ай бұрын

  What if metal poles got bent during a move and you want to adjust rack. I have this issue. I cannot bend metal pole back to the center.

• 
  @zell8635 ай бұрын

  Put pole in some hole to point where it is bend and press. Or find someone who can do it.

• 
  @mikekoivusalo59625 ай бұрын

  Will the mallet method work if it cannot be turned upside down?

• 
  @emlodi23106 ай бұрын

  Thank you for posting this, I was wondering how I was going to level it! QUERY: Is it ok to transport the shelving units intact or should I take them apart?

• 
  @tomhristovski50686 ай бұрын

  SPLIT SLIVES FOR SHELVING TO ORDER

• 
  @lorette24437 ай бұрын

  My shelf is wobbling like a cradle, and all the shelfs just sit over the clips, even after all the pressing and pushing they don't go over the clips as shown in the pictures. Can I replace the clips with something else? Please help 🙏

• 
  @MG-cd9ek2 күн бұрын

  These are crap the clips don't wedge into place going back ASAP

• 
  @truthseekerKJV8 ай бұрын

  How do you remove the threads from the posts ?

• 
  @1456Sassy8 ай бұрын

  I was hoping I'd be able to transport my wire shelving units while still assembled. I'm moving to another town. My daughter informed me that when she tried that, they fell apart. Sooooooooooooo here I am! Thanks for the video on how to disassemble them. I did order a rubber mallet.

• 
  @SSJvegito5013 ай бұрын

  Same here. I thought that maybe I could put it inside a moving truck but I fear it's gonna break apart during driving and all stuff breaking and hell all inside. A rubber mallet just costs 5 dollars so I'll just follow the video and save possible trouble instead of being lazy.

• 
  @geraldtbyrdii40308 ай бұрын

  Where does the pole separate?? I see numbers but they're not twisting?

• 
  @nikkydalby71268 ай бұрын

  This video was a life saver - thank you!! There’s only me & 1 other woman in my department & asking the guys from other departments to help with anything is such a headache! Now I can just adjust the shelves on all the carts in my department on my own - yay!! 🎉

• 
  @griseldasantoyochavez86469 ай бұрын

  You just save me a headache

• 
  @donsides17769 ай бұрын

  The assembly is ridiculous. If I ever get another one it will have to be assembled at the store,. I have spent an hour on three separate nights this week and still don't even have the bottom shelf on correct. I get one part right and then another part slips off. If a try a tool, I try will be a sledge hammer.

• 
  @lady20029 ай бұрын

  Thanks 😊

• 
  @PinkgloRadio9 ай бұрын

  Thank you 🙌🏼

• 
  @WaxmanHenry10 ай бұрын

  do these clips ever come apart?

• 
  @katewolman407611 ай бұрын

  Great video thank you.

• 
  @ak-rillo11 ай бұрын

  Love your acting

• 
  @gwaynegraydon309711 ай бұрын

  What do I use on clips that have been in a restaurant and have greace on them and made them stuck?

• 
  @ShelvingIncorporated11 ай бұрын

  This video may be helpful: kzread.info/dash/bejne/o65qraulk9nXcrA.html. A degreaser product or vinegar/warm water may help. You can also try to use a flat blade or screwdriver to pry the two sides apart.

• 
  @chuckiek897211 ай бұрын

  I have to move 30 of these using a van. I have to put them on their side and when I do that they come apart. Any tips to move them without spending hours to disassemble and reassemble? Ty

• 
  @ShelvingIncorporated11 ай бұрын

  We would suggest using a rubber mallet to tap all shelves firmly in place, in order to ensure they hold better. You could also perhaps use masking tape to keep the shelves in place.

• 
  @sukryvan1975 Жыл бұрын

  Amazing

• 
  @ShelvingIncorporated11 ай бұрын

  Thanks!

• 
  @sukryvan1975 Жыл бұрын

  ❤

• 
  @herminehyatt42 Жыл бұрын

  I am putting a unit together I want to know if all the clips are the same sizes.

• 
  @ShelvingIncorporated11 ай бұрын

  Our wire shelving posts have a 1" diameter and use these shelf clips: www.shelving.com/1-Diameter-Shelf-Clips-4-Pack-p/si-apsc.htm. However, we also offer 3/4" diameter shelf clips for customers who have existing 3/4" posts.

• 
  @noelpensock4421 Жыл бұрын

  After disassembling and reassemblig my mtro shelf, the locking levers for the top shelf will not close. Had no problems with the other sheves. How can I fix this?

• 
  @daleunderdue6935 Жыл бұрын

  Great video. What if you don't have access to a rubber mallet or a hammer? Is there any other tool that can be safely used?

• 
  @ShelvingIncorporated11 ай бұрын

  You can use another durable striking instrument, as long as you place a towel or cloth at the striking point. This will prevent you from causing any damage to the supporting truss underneath the shelf.

• 
  @user-sz6rb6io1s Жыл бұрын

  is there a video on how to adjust the shelves once you've made the racks

• 
  @ShelvingIncorporated11 ай бұрын

  We sure do! Please check out this video on how to adjust your wire shelving: kzread.info/dash/bejne/epN4k62mc9GWncY.html

• 
  @irenethomas8034 Жыл бұрын

  What are the blue things for?

• 
  @ShelvingIncorporated11 ай бұрын

  We would be happy to help! Can you please elaborate on what blue things you are referring to?

• 
  @guillenf1965 Жыл бұрын

  HAHAHAHA WE'RE JUST GOING TO PUT THE SPLIT SLEEVES IN A BAG OUT TO THE SIDE.... then he tosses them so me lol

• 
  @gwaynegraydon3097 Жыл бұрын

  What If this is an industrial one that has been used and now I need to get it in my greenhouse. I have turned over and tapped. Nothing.

• 
  @ShelvingIncorporated11 ай бұрын

  You could try a lubricant like grease or WD-40, letting it sit for 30+ minutes before tapping with a rubber mallet evenly around the shelf collars. You can also try applying heat onto the shelf collars.

• 
  @melasonbelizaire1185 Жыл бұрын

  Thanks, very useful

• 
  @ShelvingIncorporated11 ай бұрын

  We're glad to hear that!

• 
  @SopranoVictoria Жыл бұрын

  Yeets the split sleeve 💀💀💀

• 
  @lahkye89 Жыл бұрын

  Can the bottom shelf be adjusted to halfway up the poles?

• 
  @ShelvingIncorporated11 ай бұрын

  While all shelves are fully adjustable and can be placed on any 1” notch along the posts, we do recommend keeping one shelf near the bottom and one shelf near the top for stability. If you choose not to have a bottom shelf, we recommend that you support the posts with 3 or 4 hanger rails along the depth and width of the bottom. Installing triangle footplates and/or post wall brackets can also help to stabilize a unit without a bottom shelf.

• 
  @sandrapelaez4473 Жыл бұрын

  Thank you😊

• 
  @ShelvingIncorporated11 ай бұрын

  You're very welcome!

• 
  @typhoons91 Жыл бұрын

  How do I buy more plastic holders for the shelves? I bought a shelf that was short a few.

• 
  @ShelvingIncorporated11 ай бұрын

  On our website, we sell 1" diameter shelf clips that fit our wire shelving posts (www.shelving.com/1-Diameter-Shelf-Clips-4-Pack-p/si-apsc.htm) as well as 3/4" diameter shelf clips, if you have smaller diameter posts (www.shelving.com/3-4-Diameter-Shelf-Clips-4-Pack-p/si-apss.75.htm).

• 
  @1456Sassy8 ай бұрын

  If the packaging was short a few holders, you should contact the place you bought it and let them know. They'd probably send you an entire package.

• 
  @CarolStaab-rl4dw Жыл бұрын

  Do i have to disassemble the shelf completely if i move it to another area in the garage? Or how can i make adjustments so it stands firm?

• 
  @guillenf1965 Жыл бұрын

  You shouldn't have to disassemble it at all just move it. Not being a smartie just saying I would think the only time you would disassemble would be if you move to a different house or something.

• 
  @ShelvingIncorporated11 ай бұрын

  We would recommend using a rubber mallet to tap all shelves firmly into place, ensuring that they stay put when moving.

• 
  @EmilyR48 Жыл бұрын

  Can you combine two units together to make a taller one?

• 
  @ShelvingIncorporated11 ай бұрын

  No, our individual wire shelving posts do not connect to create a taller unit.

• 
  @qubit0002 Жыл бұрын

  what if one side is stuck and wont come loose after hitting with mallet?

• 
  @ShelvingIncorporated11 ай бұрын

  You could try a lubricant like grease or WD-40, letting it sit for 30+ minutes before tapping with a rubber mallet evenly around the shelf collars. You can also try applying heat onto the shelf collars.

• 
  @1456Sassy8 ай бұрын

  @@ShelvingIncorporated Thanks for that tip. I'll try the lubricant if need be.