This was very helpful. Much more so than the manual. Thank you.
@mnisby768214 күн бұрын
Best video on this dang thing I’ve seen! Thank you!!!!!!
@warrenpaul599518 күн бұрын
Wow! I needed this more than anything. Thanks for thorough and detail video. Very much appreciated.
@kathrynstoker942621 күн бұрын
What is the Sensor bypass used for?
@ShadWat-gq9sw23 күн бұрын
Does this work with 5g?
@thriveos23 күн бұрын
No. The current version only works with 2.4g.
@monalisasmiles197823 күн бұрын
Listen…I’ve fought with this thing for days now so THANK YOU for being so thorough with this video!
@fallon3rockstar26 күн бұрын
Ours runs the 4 zones that we have programmed, and then it starts over again. I don’t understand. Program B and C say 0 for time. It doesn’t make any sense.
@mohammadhaidari6981Ай бұрын
Thank you so much. Was very informative.
@BosgemorsАй бұрын
Thank you This is a great help Why does non of the 5 QR codes on the packaging can give u this detail
@captaingyro3912Ай бұрын
Excellent explanation.
@Tridus1xАй бұрын
I know this is a bit late but I just wanna say thanks for the great video.
@JohnnylmillaАй бұрын
Found it! I appreciate you!
@bobsponge3747Ай бұрын
Thanks. Video helped me start. But, i am still a bit lost. Let me explain. I have 4 zones. All set and running as i want but i want zone one to run twice a day. The other 3 zones just once a day every second day. How do i set this up. Its out of my brains league. I mean how does the following sentence make sense... I have a 6 zone programer, each zone can start 4 up to four times a day and i have three programmes per @#😮😅&"** . Please help. 😂😂😂
@tellofiriometto58102 ай бұрын
Thanks for taking the time to explain it in a simple way
@jermaynefrancis82962 ай бұрын
Hi I turned off my hunter x core unit last year winter tim,but when I turned it on summer time it lost preprogrammed days so I followed your helpful video to run Tuesday and Saturday which it does do,but the front yard 3 zones come on all other days of the week when I've set them off.I've tried the reset button on side of unit and held down program button and right side arrow but now front and rear zones are coming on everyday can you please help me thank you in advance.
@thriveos2 ай бұрын
Go to "water days" and check programs B and C. There is a high chance you have days set for the other programs. Watch the video again to see how to check different programs.
@jermaynefrancis82962 ай бұрын
@@thriveos omg! You were correct it had B & C with run minutes so I turned B & C off and now have just A running the 6 stations on set minutes watering days set for Tuesday & Saturday.I will check tomorrow Friday hopefully shouldn't come on and should come on Saturday.The previous home owners must of had it set A,B,C its been doing my head in lol thank you so much, much appreciated from Perth Australia 🇦🇺 🙌👍🙂
@jermaynefrancis82962 ай бұрын
Also I have a wireless rain sensor so I'm guessing if the sprinklers come on while it's raining they would automatically turn off would I be correct? Oh! And the hunter x core unit looks hard wired as its not plugged into power socket.Just wondering that battery in the Hunter unit 2032 battery I think is that to run rain sensor or the hunter unit? Unit is running fine but I'll probably replace that battery not sure how old it is and I guess will have to reset unit again thank you again in advance
@nickinc3 ай бұрын
Nice. Great video. My system was coming on at all times of the night. Now I've got it right. Thank you
@Eddie510s3 ай бұрын
Thank you so much bro ! So what if I want to set my zone 1 ( front grass) to 10 minutes at 4:00am and 30 minutes around 7:30pm in the same day ? Can I do that ??
@bobsponge3747Ай бұрын
Bro, can we start a club for confused xcore owners.
@fallon3rockstar26 күн бұрын
I think you would then program your second run time under program B, like a second schedule?
@oterosocram253 ай бұрын
Truly appreciated
@JonnyHicksNZ3 ай бұрын
This controller is the biggest load of shit. Get s Rainbird!
@zbonicat5 ай бұрын
Excellent tutorial! Thanks!
@edkendall65225 ай бұрын
Thanks for this, it really helped. Clear and easy to understand
@shannon16365 ай бұрын
Brilliant. Huge thanks for this tutorial from Western Australia 👍
@thriveos2 ай бұрын
All the way from Australia? Glad we could help. More tutorials to come!
@dammeamnhac229 ай бұрын
Wow he is the best I got it … I was confusing and got the hard time to adjustment but now I’m going to do it …. Love it thank you for Amazing video ❤❤❤
@sabugdalantx9 ай бұрын
Can you all do a video app and weather station. This was a great video
@vincegarcia87619 ай бұрын
The Serial Number on the WAND......that has to be put in the Controller setting? you bypassed that too quick
@jimdodge576610 ай бұрын
I could piss that much
@giancarloacquista738110 ай бұрын
Thank you best explanation!
@colesnorris11 ай бұрын
Thank you, very informative.
@anngatlin215311 ай бұрын
Thank you so much!!!
@docmarty965711 ай бұрын
Great explanation. Thanks😅
@kiss718able11 ай бұрын
Well said and done!!
@aaronmatheny69511 ай бұрын
Good video - thanks for sharing this!
@1lebailey11 ай бұрын
You went waayyyy too fast
@patsyeparker8362 Жыл бұрын
I need to use the manual setting when it is programmed. How do you do that?
@jayennjr Жыл бұрын
Thanks a lot for this. 3 years later and it's still helpful. What's the sensor bypass? Mine is active but the video it looks set to off.
@cynthiastandley5742 Жыл бұрын
Great video. I'm most of the way there. It's not clear to me if say you had 4 start times on one station (for growing grass from seed) every 4 hours, (with 4 cycles each) is it important for the other stations to not overlap in time sequences. I'm thinking they shouldn't. I have 5 stations and only one is being re-seeded right now. Or, if I put the station in question on program b by itself, do I still have to make sure times don't overlap. I was going to start with 10 minutes cycle time and 50 minutes soak, so there is enough time to run other stations in between cycle times. Sort of depends on the weather and heat. Again, great job!
@user-bm5lp5wp2t9 ай бұрын
Start time only call for Strat time ,1 or2 or3 or 4 only select one time and am and that manage all the station according to the run time entered and the same for water in the afternoon PM, that's handle two time of watering a day ,AM/PM.
@jbbushon Жыл бұрын
I would strongly advise no one to buy from this company. WiFi / Bluetooth never seems to connect and impossible to get ahold of anyone for support. Just compare their app ratings to other competitive brands.
@user-el7je6xh1w Жыл бұрын
Question: at the end of season, I turn-off (OFF) my Hunter X-Core controller. Next season, I turn-on (RUN) my controller is last years settings still in the system or do I have to re-program it again?
@thriveos Жыл бұрын
When you turn it back to run, it will be good to go with the previous schedule.
@JerseyJustin88 Жыл бұрын
Holy crap, this video was unbelievably helpful. I watched like 3 videos prior to this and was still a bit confused (first time homebuyer), but after seeing this I understand my system 100%. Thanks You :)
@thriveos Жыл бұрын
Glad it helped!
@angmedina062 ай бұрын
I thought the same thing too!! lol
@vanand76 Жыл бұрын
awesome helpful tutorial, thanks for taking care in explaining everything clearly, what about B and C program, do we have any tutorial on that?
@thriveos Жыл бұрын
Program B and C are only if you are trying to water a specific zone(s) separately from everything else. So if you want to water lets say a flowerbed zone everyday, while everything else is only 2 or 3 days, then you would set the flowerbed zone on program B and set it for separate times.
@acerecedes Жыл бұрын
How long does it take to update? Mine has been updating for the past hour
@thriveos Жыл бұрын
If you find it continually updating, I would pull the Wifi Wand out, let it cool down for a minute then put it back in.
@iNOEEL Жыл бұрын
Hi. Is there any range? So if I want to control it from afar, i.e. hundreds of kilometers away, is this solution still functional in that case?
@thriveos Жыл бұрын
The controller connects to wifi, so the it must be within the range of the wifi router.
@Ls3Atomicvette Жыл бұрын
great video straight to the point and easy to understand
Пікірлер
thank you sir - i needed this one today👍👍👍👍👍
No explanation on the bypass…
Best simplest instructions by far! Thank you!
This was very helpful. Much more so than the manual. Thank you.
Best video on this dang thing I’ve seen! Thank you!!!!!!
Wow! I needed this more than anything. Thanks for thorough and detail video. Very much appreciated.
What is the Sensor bypass used for?
Does this work with 5g?
No. The current version only works with 2.4g.
Listen…I’ve fought with this thing for days now so THANK YOU for being so thorough with this video!
Ours runs the 4 zones that we have programmed, and then it starts over again. I don’t understand. Program B and C say 0 for time. It doesn’t make any sense.
Thank you so much. Was very informative.
Thank you This is a great help Why does non of the 5 QR codes on the packaging can give u this detail
Excellent explanation.
I know this is a bit late but I just wanna say thanks for the great video.
Found it! I appreciate you!
Thanks. Video helped me start. But, i am still a bit lost. Let me explain. I have 4 zones. All set and running as i want but i want zone one to run twice a day. The other 3 zones just once a day every second day. How do i set this up. Its out of my brains league. I mean how does the following sentence make sense... I have a 6 zone programer, each zone can start 4 up to four times a day and i have three programmes per @#😮😅&"** . Please help. 😂😂😂
Thanks for taking the time to explain it in a simple way
Hi I turned off my hunter x core unit last year winter tim,but when I turned it on summer time it lost preprogrammed days so I followed your helpful video to run Tuesday and Saturday which it does do,but the front yard 3 zones come on all other days of the week when I've set them off.I've tried the reset button on side of unit and held down program button and right side arrow but now front and rear zones are coming on everyday can you please help me thank you in advance.
Go to "water days" and check programs B and C. There is a high chance you have days set for the other programs. Watch the video again to see how to check different programs.
@@thriveos omg! You were correct it had B & C with run minutes so I turned B & C off and now have just A running the 6 stations on set minutes watering days set for Tuesday & Saturday.I will check tomorrow Friday hopefully shouldn't come on and should come on Saturday.The previous home owners must of had it set A,B,C its been doing my head in lol thank you so much, much appreciated from Perth Australia 🇦🇺 🙌👍🙂
Also I have a wireless rain sensor so I'm guessing if the sprinklers come on while it's raining they would automatically turn off would I be correct? Oh! And the hunter x core unit looks hard wired as its not plugged into power socket.Just wondering that battery in the Hunter unit 2032 battery I think is that to run rain sensor or the hunter unit? Unit is running fine but I'll probably replace that battery not sure how old it is and I guess will have to reset unit again thank you again in advance
Nice. Great video. My system was coming on at all times of the night. Now I've got it right. Thank you
Thank you so much bro ! So what if I want to set my zone 1 ( front grass) to 10 minutes at 4:00am and 30 minutes around 7:30pm in the same day ? Can I do that ??
Bro, can we start a club for confused xcore owners.
I think you would then program your second run time under program B, like a second schedule?
Truly appreciated
This controller is the biggest load of shit. Get s Rainbird!
Excellent tutorial! Thanks!
Thanks for this, it really helped. Clear and easy to understand
Brilliant. Huge thanks for this tutorial from Western Australia 👍
All the way from Australia? Glad we could help. More tutorials to come!
Wow he is the best I got it … I was confusing and got the hard time to adjustment but now I’m going to do it …. Love it thank you for Amazing video ❤❤❤
Can you all do a video app and weather station. This was a great video
The Serial Number on the WAND......that has to be put in the Controller setting? you bypassed that too quick
I could piss that much
Thank you best explanation!
Thank you, very informative.
Thank you so much!!!
Great explanation. Thanks😅
Well said and done!!
Good video - thanks for sharing this!
You went waayyyy too fast
I need to use the manual setting when it is programmed. How do you do that?
Thanks a lot for this. 3 years later and it's still helpful. What's the sensor bypass? Mine is active but the video it looks set to off.
Great video. I'm most of the way there. It's not clear to me if say you had 4 start times on one station (for growing grass from seed) every 4 hours, (with 4 cycles each) is it important for the other stations to not overlap in time sequences. I'm thinking they shouldn't. I have 5 stations and only one is being re-seeded right now. Or, if I put the station in question on program b by itself, do I still have to make sure times don't overlap. I was going to start with 10 minutes cycle time and 50 minutes soak, so there is enough time to run other stations in between cycle times. Sort of depends on the weather and heat. Again, great job!
Start time only call for Strat time ,1 or2 or3 or 4 only select one time and am and that manage all the station according to the run time entered and the same for water in the afternoon PM, that's handle two time of watering a day ,AM/PM.
I would strongly advise no one to buy from this company. WiFi / Bluetooth never seems to connect and impossible to get ahold of anyone for support. Just compare their app ratings to other competitive brands.
Question: at the end of season, I turn-off (OFF) my Hunter X-Core controller. Next season, I turn-on (RUN) my controller is last years settings still in the system or do I have to re-program it again?
When you turn it back to run, it will be good to go with the previous schedule.
Holy crap, this video was unbelievably helpful. I watched like 3 videos prior to this and was still a bit confused (first time homebuyer), but after seeing this I understand my system 100%. Thanks You :)
Glad it helped!
I thought the same thing too!! lol
awesome helpful tutorial, thanks for taking care in explaining everything clearly, what about B and C program, do we have any tutorial on that?
Program B and C are only if you are trying to water a specific zone(s) separately from everything else. So if you want to water lets say a flowerbed zone everyday, while everything else is only 2 or 3 days, then you would set the flowerbed zone on program B and set it for separate times.
How long does it take to update? Mine has been updating for the past hour
If you find it continually updating, I would pull the Wifi Wand out, let it cool down for a minute then put it back in.
Hi. Is there any range? So if I want to control it from afar, i.e. hundreds of kilometers away, is this solution still functional in that case?
The controller connects to wifi, so the it must be within the range of the wifi router.
great video straight to the point and easy to understand
Thank you!
what are the program B,C,E, F ?
BRAVO
Super helpful video- thank you so much!
You're welcome!
Excellent explanation, thanks 👍🏼
Glad it was helpful!