Пікірлер

• 
  @jasonpierce1980Күн бұрын

  Get a small boat winch hand crank wench. Round bolt into the roof Eve trus. that way you guys can crank it up instead of lifting it. Or I think it's called the block and tackle if you get enough of them you can do it by yourself.

• 
  @Oxaca73Күн бұрын

  I wanted to find real reviews on this couch and happened across your videos. Knowing they tried to address your issues after the first video and sending you a picture of your dog really impresses me. Thank you for making these videos.

• 
  @HunterMabeeFilmsКүн бұрын

  This isn’t made of just 2x4

• 
  @jerrygonzalez5529Күн бұрын

  Does the instructions opt for a flush mount? I have a tiny house and this would be cool if flush mount is an option. Thank you in advance.

• 
  @Larry-ik7dwКүн бұрын

  On your un-removable bolts did you use some sort of thread locker?

• 
  @janetettridge4956Күн бұрын

  May I suggest that you put or spray some wd40 on the galvanised brackets to retardant corrosion. congratulations from the U.K.

• 
  @ednacano63Күн бұрын

  Beatifull momy

• 
  @jergervasi33312 күн бұрын

  Cool video! I have both products, and I was looking for something that showed the difference. The red top is going to work best for me. Thank you!

• 
  @fallguy42092 күн бұрын

  149.99 now

• 
  @rskite2 күн бұрын

  What trailer hitch do you have one your CR-V?

• 
  @MotherDaughterProjectsDIYКүн бұрын

  It was installed at the Honda dealership so I don't know the specifics. Sorry I can't help.

• 
  @arijacobs992 күн бұрын

  That is so cool!!

• 
  @supercheekykiwi2 күн бұрын

  Bigger screwdriver will make the world of difference .

• 
  @jelly_fishing3 күн бұрын

  Your videos on building the trailer were extremely helpful !!! Built mine with your tips on mind

• 
  @LD71113 күн бұрын

  I bought this product only yesterday, looking forward to trying it out. Thanks for the helpful and honest review ☺️ 👍🏼 from Scotland UK

• 
  @smarthome26604 күн бұрын

  TIP: cutting small pieces, use a sacrificial fence to keep both parts in plane so the cut off piece doesn't go flying. Clamp a 3/4" x 3 1/2" board to the back fence, then clamp the stop to that. This will trap the cut off part.

• 
  @smarthome26604 күн бұрын

  Wow, what an amazing professional video. FYI, in most states it is required that all lights work. Even if side lights are not required, if you have them, they must work. Imagine those big rig semi's with 100 lights, just one light out means a ticket, so keep it simple. Also, make sure your license plate light works too. My brother has the same trailer and lived in Florida. He added PVC pipe to encase all of the wires in, to keep mice from eating the wires. He doesn't fold his up, so he omitted the casters.

• 
  @OVHabitats5 күн бұрын

  BTW I am your newest subscriber!

• 
  @MotherDaughterProjectsDIY4 күн бұрын

  Thanks for the sub!

• 
  @OVHabitats5 күн бұрын

  I stumbled across your Harbor Freight (my favorite store, Home Depot is getting jealous) trailer video. I checked out your content and it is awesome. As for your screen door/ doggie door, which I love, there is an easy fix to the staying open problem. It appears that the screen is longer than the opening by 1/2 - 3/4 of an inch which is causing the problem. Attach a 1 inch or 1 1/2 inch steel flat bar to the door, shorten the screen and add magnets to the bottom. This way when your beautiful pup goes through the screen passes over the steel then then magnets pulls it back into place. I am also in Florida. May I borrow Mom and her sewing machine for some of my fish room projects? LOL I have to sew everything by hand. LOL

• 
  @FeasterSolutions5 күн бұрын

  You & your mom are awesome! Good job, thank you for the detailed instructions. I was having issues putting mine together! I'm a 76 & retired electronic & and mechanical engineer. The supplied manual assembly instructions were horrible. You saved me from taking having to return this trailer to Harbor Freight...! Cheers, and thanks again!

• 
  @RuossFamilyAdventures5 күн бұрын

  You need to crisscross your chains and hook to the vehicle

• 
  @dgperforms16 күн бұрын

  I see you have plenty of DeWalt Tools. DeWalt also makes great Cordless Ratchets. 😊

• 
  @dgperforms16 күн бұрын

  You need to grind/sand or file off paint to the bare metal to get a good ground. Use dilectric grease on connections

• 
  @JohnSnow-vf8jo6 күн бұрын

  I used 80% straight vinegar on my patio slab joints which are always full of strong dandelions, now one year later, they are just regrowing, probably from new windswept seeds, so I will now give them another spray with 40% this time, to see If I am needlessly using the stronger ( and pricier ) vinegar. Tune in twelve months for the update.😁😁

• 
  @johngraham87526 күн бұрын

  Good video. No wasting 10 mins talking about nothing. You got right to it! Thank you. Yes, this is a video for a fixture that is only supported by the ceiling drywall... nothing heavy and not a ceiling fan. This video was perfect for what it described.

• 
  @ClimberPD7 күн бұрын

  I built the same last winter. A few tips for anyone with that same: 1) Upgrade the casters. 2) Get (or make) a folding license plate bracket. 3) Put 2 of the old caster on the back of the trailer. Now, when you want to fold it, leave the back unfolded and tip the front up letting the back half rest of the casters and the plate fold on its hinge. This will be just a bit over half the weight. Then you can just flip the back up. I'm not particularly strong, and I can do it all by myself (barely).

• 
  @MotherDaughterProjectsDIY6 күн бұрын

  Good information. Thanks for the tip.

• 
  @deeannm84567 күн бұрын

  Thanks for the great video!

• 
  @SlotCarCast7 күн бұрын

  You can fold this by yourself using leverage. Have the trailer out flat.unhook the front locks, lift the rear end up so the tail lights are facing up. Hook a rope or strap to the rear end and the front end, then go lift the front end. As it tips back, the weight of the rear side will help you life the front end up.

• 
  @Ogstuff7 күн бұрын

  also be very careful with the wires on this thing. they love to come loose and then find tires to be ripped out by... i eventually just bought wireless magnet lights...

• 
  @Ogstuff7 күн бұрын

  absolutely COMPETE!

• 
  @StumblingBumblingIdiot7 күн бұрын

  Nice build. I am surprised it has held up as well as it has with it being so cheap! I may have to look into one as the fully built ones around here (south central PA) are $2200+. Keep the great videos coming :)

• 
  @BrandonSchram9 күн бұрын

  Anyone know how to pair a second remote? I have two remotes, one from another fan that's broke. Can it be paired?

• 
  @luzluz927810 күн бұрын

  By watching your video I was able to assemble mine in 15 min approximately, and did it all by myself. Thank you!❤

• 
  @Cash4Fruit11 күн бұрын

  Thanks ladies! I got it done 💪🏼 directions were perfect!

• 
  @mmc47211 күн бұрын

  My son has dropped a large pebble down my bathroom sink. I feel that I will need to remove the pipes to sort the blockage. 😭

• 
  @didnarivera737111 күн бұрын

  wow i am new learn from you about carpets so i had two dogs so if you can take new video about any title and woods on the pee ?

• 
  @stevenshelp110712 күн бұрын

  I've loved my trailer, it looks identical to how yours came out. I take it from Florida to the mountains near Atlanta GA (5 hour drive) of straight highway and it handles it perfectly. Best 600 dollars I've spent on a trailer. Thanks for this quick detailed maintenance video overview.

• 
  @armurano509314 күн бұрын

  I have an audio-visual tech background, and have to say the filming, editing and sound/narration mix was excellent. I can see you on HGTV.

• 
  @hans_hans14 күн бұрын

  is it worth to have this or its just another fancy fan???

• 
  @MotherDaughterProjectsDIY14 күн бұрын

  I like this one much better than the old fan. It has a cleaner look and more fan and light options.

• 
  @dennisrose503815 күн бұрын

  I'm installing this same light now. I've done such fixtures before, including one mounted on a cathedral ceiling. The instructions that come with this product are TERRIBLE. No words just drawings. I guess they believe folks can't read anymore? Anyway, I couldn't figure out what the slim disc was for as it had obvious holes in it for attachment but the drawings don't indicate how or where it attaches to. So I looked for a video. I found yours. The extra stuff about changing out a box was wasteful. That should be a separate video. You failed to mention an important detail that I encountered early on. You must FULLY remove the set screws from the down rod before threading the rod into the fixture (K) because they interfere with the threading process. Trying to force thread it will not work and likely damage the threads. You glossed over the wiring bit for beginners, kind of important. I don't need it, but kind of important.

• 
  @micheal748816 күн бұрын

  My side running lights only have 1 brown wire which is power right but no white or black wire mine doesn't come with to wires just 1 brown wire my back lights work great but my running light doesn't turn on at all any idea too get them to work with 1 brown wire

• 
  @DragonclawMakerStudio16 күн бұрын

  I love learning about these things from your channel. I have a project I want to use some caulk for one aspect of my project and use it again in a couple days for a different part. $10+ for using just a little each time.

• 
  @CaptainQueue18 күн бұрын

  I put down Scott's Triple Action twice this year on my neighbor's weedy yard with the minimum wait of 2 months between. I was skeptical that this product would make much of a dent but his lawn went from 40% grass / 60% weeds to 80/20 after 4 months. I still have to spot spray the worst of the weeds but I expected that. I am very pleasantly surprised with Scott's Triple Action using only two applications and will probably add the Ultra lawn food next year.

• 
  @PoM-MoM19 күн бұрын

  My FL neighbor must have used your DIY mailbox video four years ago. He has the exact, looks identical

• 
  @PoM-MoM20 күн бұрын

  Doing this tomorrow!

• 
  @PoM-MoM20 күн бұрын

  Wicked 😎 🆒️

• 
  @operaguy120 күн бұрын

  3 years later, $545

• 
  @dannyboy003721 күн бұрын

  Try using a 500,000 btu propane torch. I have found great success with this in my coastal hardscaped backyard. Weed wack and apply vinegar where delicate areas you would like to preserve.

• 
  @ayaanu984021 күн бұрын

  Could you give me tips on how to make a standing three panel divider with mirrors? I have pictures of the idea I am trying to create.

• 
  @malcolmmoses171821 күн бұрын

  Hey, So she mentions that the smaller, top cover didn't fit. Mine did not either so here is what I did - I took off the 4 metal support brackets for that cover, removed the plastic ends (from the end that the cover goes over) shortened them by cutting 1 inch off of each one, replaced the plastic end piece - and bam - the cover fit without any trouble 🙂