@@d-rell8135 LS. It's an LQ4 with a 200 shot of nitrous
@ThibauxMellow17 күн бұрын
I got a lt1 in my caprice too, what else did you have to upgrade? Has it been reliable?
@355LT117 күн бұрын
Engine •355CI •Hypereutectic KB pistons(5cc dish) •Refreshed Stock Crank and Rods •LE1 Heads •~11.4:1 Compression •Llyod Spec 227/235 110LSA Camshaft •1.6 Comp Pro Magnum Rocker arms •Comp High energy lifters •Hand Ported Intake •58mm Throttle body(PP) •Accel #150830 (30lb) injectors •Walbro 255lph w/ Hotwire kit • Flowtech Longtube headers 1 5/8" primaries • Stock MAF with a straight 3.5" tube and Spectre Air filter Transmission/Rear •32-3500 Protorque converter (single disk lockup) •Performance 4l60e Rebuilt with .500 boost valve and typical upgrades • 3.73 gears(Stock G80 LSD and axles) • 28" 275 60r15 Tires Additional info: •Air pump deleted •EGR deleted •Would like to keep a 6300rpm rev limit •91 octane •I am running the 2 factory knock sensors •TB idle hole has been drilled out slightly
@355LT117 күн бұрын
Posted all the specs in a different comment. It was pretty reliable for 6 years, but unfortunately I had a failure last year while spraying a 100 shot of nitrous. I ran out of nitrous mid pull and it hydrolocked cylinder 5 and cracked the piston ring land
@aubreywright912119 күн бұрын
ill take an lt1 gen 2 over an ls any day my lt1 with comp cam 503 aft heads and 36 lb injectors makes 400 wheel hp on opti still.
@355LT118 күн бұрын
@@aubreywright9121 Hell yeah! That's badass
@byronjones557325 күн бұрын
I was try to see if you could help me ls swap my 95chevy caprice pls 🙏
@355LT124 күн бұрын
@byronjones5573 What kind of help are you hoping for? I can definitely help you with what parts are needed. This is a 95 too 😎
@byronjones557324 күн бұрын
What all tools I will need to do my first LS swap I want to put 6.0 cam with a l480e
@ThaDirtyBubble28 күн бұрын
My rear bumper looks almost identical, no joke! The sun is really hard on these cars.
@355LT128 күн бұрын
Yep, this one sat for 8 years in my folks back yard. My new place has a paint booth though, so I'll get it fixed up this fall/winter
@jerrylyons3945Ай бұрын
Tha Heartbeat of America
@MatthewAudАй бұрын
So you boosted up an old Caprice,nice but not really exciting.
@355LT1Ай бұрын
Yeah, pretty lame tbh 😴
@user-xx4so8fu9yАй бұрын
Loved those Shamu Caprices. My favorite police car of my 31 year career. Always thought they'd make an awesome sleeper with an LS. And the trailer hitch .😜
@355LT1Ай бұрын
Yep, we want to get a big rear window graphic with an Orca lol. We call this the LSX ORCA
@blackmambaz2850Ай бұрын
Sounds amazing cant wait to see what it does !
@355LT1Ай бұрын
Thanks, man. Check out my new video to see a couple drags and burnouts kzread.info/dash/bejne/fXib285me6yqaZM.htmlsi=QVIOG6kcF9ZhlN5S
@blackmambaz2850Ай бұрын
@@355LT1 No problem just watched it that thing runs awesome
@jerrylyons3945Ай бұрын
Tha Heartbeat of America
@JoeStill-un9gpАй бұрын
Nice, but you gotta run 9"s these days, or u are slow😢
@355LT1Ай бұрын
True hahaha. First year with the LS and plenty of room to turn it up more 😈 Just need all the not-so-fun safety equipment
@JoeStill-un9gpАй бұрын
@@355LT1 love those cars too. Peace out
@Jordy-927Ай бұрын
Love the B-bodies.
@sampayton2225Ай бұрын
That was U hauling ass
@355LT1Ай бұрын
Good one lol
@pjxpjch7607Ай бұрын
Back on the lt1 what did you used to get the 2step ?
@355LT1Ай бұрын
I bought a used Mallory 685 Ignition box for my 2Step and Nitrous RPM switch
@pjxpjch7607Ай бұрын
@@355LT1thank you
@nikothevirgoАй бұрын
Car never fails to make me smile 🔥
@355LT1Ай бұрын
Thanks, man. Me too, honestly 😎
@ztwntyn8Ай бұрын
Word
@KuwadBasedАй бұрын
i said i neeed it
@rickyhernandez2150Ай бұрын
Please go next year!! I wanna see this thing in person!
@355LT1Ай бұрын
I'll be there every year 👌😎
@AstroCreepSpeedShackАй бұрын
Not bad for a big old Cheby 😎 Some of the Impala SS Club guys want you to come to our annual National event this year in Ohio. All B/D bodies- road course HPDE/TimeTrial, Autocross, Drag Racing and car show. It’s always a blast.
@355LT1Ай бұрын
@AstroCreepSpeedShack Thank you! I'm certainly sold on the LS platform after this showing. I will definitely be there in the next 3 years for the NATS event. Financially not in the cards this year sadly, but I know it's a blast.
@rickyhernandez2150Ай бұрын
@@355LT1 cool cool, maybe I’ll have my caprice done by then 😎 your caprice is one of my biggest inspirations and hope to drag and drive with mine one day as well!
@355LT1Ай бұрын
Hell yeah, man. That means a lot to me, thanks. I'm rooting for you. Be awesome to meet you out there at an event 😎 Get to work and feel free to ask any questions
@Alss383Ай бұрын
How much were you spraying at the time?
@355LT1Ай бұрын
This would have been about 100 shot jets
@cloutchasingkev5779Ай бұрын
♥️🖤💙😳 MY 5.7 LT1 DOSENT SOUND LIKE THIS WTF 😂♥️🖤💙
@355LT1Ай бұрын
Put a cam in there 😎❤️
@SparkyBuiltАй бұрын
Nice one!
@355LT1Ай бұрын
Thank you! Forgot your channel name, so I'm glad you commented 😊
@intermissionbuffaloАй бұрын
I love the bounce
@BanditsTAАй бұрын
Sweet!👍
@brucepaschall5628Ай бұрын
You guys know that the Chevy Caprice LS was a cop car
@355LT1Ай бұрын
Yep, the 9C1. I want one
@eddierivera89102 ай бұрын
WI 😎 💪
@dieselapegarage2 ай бұрын
That thing sounds amazing definitely not the average grocery getter nice ride 👀🍿💪
@355LT12 ай бұрын
Thanks, man. I'm having a blast with it 😎
@dieselapegarage2 ай бұрын
@@355LT1 I bet keep it coming
@MONKMIKE2 ай бұрын
Plus with a Hitch. 😆 Bowtie all the way guy's. 👍🏻😎👍🏻
@355LT12 ай бұрын
Yes sir 👌😎
@jeffham9442 ай бұрын
Speedo missed a few numbers KEKW
@355LT12 ай бұрын
Not the greatest refresh rate hahaha
@jarmaljackson2 ай бұрын
Sounds good, bro. What 355 kit did u use for ur lt1?
@355LT12 ай бұрын
Thanks. On the LT1 I used some Hypereutectic pistons from Jegs and had the stock rods and crank reconditioned. For the top end, it was Lloyd Elliott LE1 heads and his 227/235 110LSA cam
@joecooper78032 ай бұрын
That’s what I’m talking about! You running a 4L80?
@355LT12 ай бұрын
Nah, I have a TH400, the 4L80s grandpa lol
@anthonymiller66962 ай бұрын
what is the camera car? to settle a debate with a friend
@355LT12 ай бұрын
My buddies big turbo Eagle Talon DSM
@Alss3832 ай бұрын
Wow that thing still has some chop even the wider LSA .
@355LT12 ай бұрын
Yeah, I'm very happy with it
@lssleepers64642 ай бұрын
Whats ur motor specs bro
@355LT12 ай бұрын
370CI LQ4, stock crank, forged pistons and rods, 799 heads, holley single plane intake, cam motion 238/254 .621/.604 lift
@lssleepers64642 ай бұрын
@@355LT1 where did u get the carb fuel injection setup
@lssleepers64642 ай бұрын
@@355LT1 nice setup bro...I may need to head that ls way
@355LT12 ай бұрын
@lssleepers6464 Holley has a 4150 single plane intake with fuel rail provisions. And I grabbed an Accufab 1250cfm 4bbl throttle body that comes with the GM IAC and TPS
@lssleepers64642 ай бұрын
@@355LT1 sounds pretty nice does do pretty good for the setup ..u thinking Bout superchargering it procharger done the line
@user-qd9mi7ey6t2 ай бұрын
93 Caprise I have the same car ❤❤
@user-km6oj1og7t2 ай бұрын
93 Caprise I have the same car
@lssleepers64642 ай бұрын
That sounds beautiful
@355LT12 ай бұрын
Thank you 😎
@reggin81122 ай бұрын
You ever dyno this with the old motor? Great looking caprice with real work done to it not all donked out lmao. Sure sounds great for a 5.7
@355LT12 ай бұрын
No, never did unfortunately. Using one of the online calculators based on 1/4 mile time and weight, it was right around 340whp on motor and 450ish on the nitrous
@reggin81122 ай бұрын
@@355LT1 That’s pretty good. The only thing that holds these cars back is the weight really.
@355LT12 ай бұрын
@reggin8112 Yeah, for sure and it's hard to really lose any weight. New motor should make 400+whp and I'll be able to spray upto a 300shot
@reggin81122 ай бұрын
@@355LT1 That will get that boat moving lmao. Plus the interiors are nice in them no need to strip them if your going to make that kind of power.
@355LT12 ай бұрын
@@reggin8112 Exactly lol. I just need to get those nice bolstered Bonneville seats.
@benmondragon78382 ай бұрын
Sounds good goals for my 94 Impala
@355LT12 ай бұрын
Thanks man 😎 What color Imp do you have??
@benmondragon78382 ай бұрын
Black BBB 84 original miles not an everyday driver only when it's nice in Denver
@ludslawrenzeogog2 ай бұрын
hell yeah man!!!
@ouulou60312 ай бұрын
Is that the original engine that came in it
@355LT12 ай бұрын
Original block, yes. With a .030" over bore and pistons and ported aluminum heads.
@nickash84742 ай бұрын
Sounds great
@355LT12 ай бұрын
Thanks man. Was hoping to go to generation gap today, but didn't get my shifter in. Did you go?
@lssleepers64642 ай бұрын
What made u go ahead and go ls...im thinking about doing a swap in my impala ss
@355LT12 ай бұрын
@lssleepers6464 I hurt a piston in my LT1 last year and with the power level I want, the LS will be able to handle it much easier
@georgemcfly12053 ай бұрын
I miss those old big body on frame boats
@wyattdinwiddie79443 ай бұрын
I’ve got a LC9 5.3 with 799 heads that’s going in mine. I thought about going the nitrous route but have decided to do a single turbo set up instead. My caprice is stock for now though haha
@355LT13 ай бұрын
Awesome 😎 LC9s are great. I don't blame you for going single turbo. Nice not to have to fill bottles and turbo noises are cool. I just put my motor together and bolted it in last weekend, so I should have a first start video coming soon 🤞
@wyattdinwiddie79443 ай бұрын
Just picked up a 96 caprice today. I enjoy your videos!
@355LT13 ай бұрын
Sweet, what color is your 96? Does that mean you have the floor shifter too then? 😎
@Djpuncho3 ай бұрын
That Hitch !!!
@355LT13 ай бұрын
It comes in handy haha. Used it for a drag and drive event last year and towed my golfcart to the track for a different event 😎
@avantgardeaclue3 ай бұрын
Subway and the dollar store??? This guy must be rollin' in it.
@355LT13 ай бұрын
We roll deep hahaha 🤣🤣🤣
@paulhare6623 ай бұрын
I remember when these things were brand new cop cars. Cops totalled 2-3 a weekend for a while. A bitch to tune up and maintain but fun to drive.
@1hunda1004 ай бұрын
Could you beef up my 96 lt1 ?
@355LT14 ай бұрын
I don't run a shop or anything, just working on my own stuff for now. I could give you advice though. Are you local to Minnesota?
@kylepeters62974 ай бұрын
What’s the exhaust setup? Wanna do something similar to a 94 Fleetwood
@355LT14 ай бұрын
Flowtech Afterburner Long tubes, 2.5" x-pipe I built then electric cutouts from jegs and cherry bomb turbo mufflers that tame it down when I don't want to be obnoxious
@pacos59714 ай бұрын
Nice Sound! Next you should invest in the suspension..... ;)
@355LT14 ай бұрын
Thanks! Yessir, It's on lowering springs and monroe severe service shocks now with air bags in the rear
Пікірлер
Moving good
@@d-rell8135 Thank you
@@355LT1 is this the ls1 or lt
@@d-rell8135 LS. It's an LQ4 with a 200 shot of nitrous
I got a lt1 in my caprice too, what else did you have to upgrade? Has it been reliable?
Engine •355CI •Hypereutectic KB pistons(5cc dish) •Refreshed Stock Crank and Rods •LE1 Heads •~11.4:1 Compression •Llyod Spec 227/235 110LSA Camshaft •1.6 Comp Pro Magnum Rocker arms •Comp High energy lifters •Hand Ported Intake •58mm Throttle body(PP) •Accel #150830 (30lb) injectors •Walbro 255lph w/ Hotwire kit • Flowtech Longtube headers 1 5/8" primaries • Stock MAF with a straight 3.5" tube and Spectre Air filter Transmission/Rear •32-3500 Protorque converter (single disk lockup) •Performance 4l60e Rebuilt with .500 boost valve and typical upgrades • 3.73 gears(Stock G80 LSD and axles) • 28" 275 60r15 Tires Additional info: •Air pump deleted •EGR deleted •Would like to keep a 6300rpm rev limit •91 octane •I am running the 2 factory knock sensors •TB idle hole has been drilled out slightly
Posted all the specs in a different comment. It was pretty reliable for 6 years, but unfortunately I had a failure last year while spraying a 100 shot of nitrous. I ran out of nitrous mid pull and it hydrolocked cylinder 5 and cracked the piston ring land
ill take an lt1 gen 2 over an ls any day my lt1 with comp cam 503 aft heads and 36 lb injectors makes 400 wheel hp on opti still.
@@aubreywright9121 Hell yeah! That's badass
I was try to see if you could help me ls swap my 95chevy caprice pls 🙏
@byronjones5573 What kind of help are you hoping for? I can definitely help you with what parts are needed. This is a 95 too 😎
What all tools I will need to do my first LS swap I want to put 6.0 cam with a l480e
My rear bumper looks almost identical, no joke! The sun is really hard on these cars.
Yep, this one sat for 8 years in my folks back yard. My new place has a paint booth though, so I'll get it fixed up this fall/winter
Tha Heartbeat of America
So you boosted up an old Caprice,nice but not really exciting.
Yeah, pretty lame tbh 😴
Loved those Shamu Caprices. My favorite police car of my 31 year career. Always thought they'd make an awesome sleeper with an LS. And the trailer hitch .😜
Yep, we want to get a big rear window graphic with an Orca lol. We call this the LSX ORCA
Sounds amazing cant wait to see what it does !
Thanks, man. Check out my new video to see a couple drags and burnouts kzread.info/dash/bejne/fXib285me6yqaZM.htmlsi=QVIOG6kcF9ZhlN5S
@@355LT1 No problem just watched it that thing runs awesome
Tha Heartbeat of America
Nice, but you gotta run 9"s these days, or u are slow😢
True hahaha. First year with the LS and plenty of room to turn it up more 😈 Just need all the not-so-fun safety equipment
@@355LT1 love those cars too. Peace out
Love the B-bodies.
That was U hauling ass
Good one lol
Back on the lt1 what did you used to get the 2step ?
I bought a used Mallory 685 Ignition box for my 2Step and Nitrous RPM switch
@@355LT1thank you
Car never fails to make me smile 🔥
Thanks, man. Me too, honestly 😎
Word
i said i neeed it
Please go next year!! I wanna see this thing in person!
I'll be there every year 👌😎
Not bad for a big old Cheby 😎 Some of the Impala SS Club guys want you to come to our annual National event this year in Ohio. All B/D bodies- road course HPDE/TimeTrial, Autocross, Drag Racing and car show. It’s always a blast.
@AstroCreepSpeedShack Thank you! I'm certainly sold on the LS platform after this showing. I will definitely be there in the next 3 years for the NATS event. Financially not in the cards this year sadly, but I know it's a blast.
@@355LT1 cool cool, maybe I’ll have my caprice done by then 😎 your caprice is one of my biggest inspirations and hope to drag and drive with mine one day as well!
Hell yeah, man. That means a lot to me, thanks. I'm rooting for you. Be awesome to meet you out there at an event 😎 Get to work and feel free to ask any questions
How much were you spraying at the time?
This would have been about 100 shot jets
♥️🖤💙😳 MY 5.7 LT1 DOSENT SOUND LIKE THIS WTF 😂♥️🖤💙
Put a cam in there 😎❤️
Nice one!
Thank you! Forgot your channel name, so I'm glad you commented 😊
I love the bounce
Sweet!👍
You guys know that the Chevy Caprice LS was a cop car
Yep, the 9C1. I want one
WI 😎 💪
That thing sounds amazing definitely not the average grocery getter nice ride 👀🍿💪
Thanks, man. I'm having a blast with it 😎
@@355LT1 I bet keep it coming
Plus with a Hitch. 😆 Bowtie all the way guy's. 👍🏻😎👍🏻
Yes sir 👌😎
Speedo missed a few numbers KEKW
Not the greatest refresh rate hahaha
Sounds good, bro. What 355 kit did u use for ur lt1?
Thanks. On the LT1 I used some Hypereutectic pistons from Jegs and had the stock rods and crank reconditioned. For the top end, it was Lloyd Elliott LE1 heads and his 227/235 110LSA cam
That’s what I’m talking about! You running a 4L80?
Nah, I have a TH400, the 4L80s grandpa lol
what is the camera car? to settle a debate with a friend
My buddies big turbo Eagle Talon DSM
Wow that thing still has some chop even the wider LSA .
Yeah, I'm very happy with it
Whats ur motor specs bro
370CI LQ4, stock crank, forged pistons and rods, 799 heads, holley single plane intake, cam motion 238/254 .621/.604 lift
@@355LT1 where did u get the carb fuel injection setup
@@355LT1 nice setup bro...I may need to head that ls way
@lssleepers6464 Holley has a 4150 single plane intake with fuel rail provisions. And I grabbed an Accufab 1250cfm 4bbl throttle body that comes with the GM IAC and TPS
@@355LT1 sounds pretty nice does do pretty good for the setup ..u thinking Bout superchargering it procharger done the line
93 Caprise I have the same car ❤❤
93 Caprise I have the same car
That sounds beautiful
Thank you 😎
You ever dyno this with the old motor? Great looking caprice with real work done to it not all donked out lmao. Sure sounds great for a 5.7
No, never did unfortunately. Using one of the online calculators based on 1/4 mile time and weight, it was right around 340whp on motor and 450ish on the nitrous
@@355LT1 That’s pretty good. The only thing that holds these cars back is the weight really.
@reggin8112 Yeah, for sure and it's hard to really lose any weight. New motor should make 400+whp and I'll be able to spray upto a 300shot
@@355LT1 That will get that boat moving lmao. Plus the interiors are nice in them no need to strip them if your going to make that kind of power.
@@reggin8112 Exactly lol. I just need to get those nice bolstered Bonneville seats.
Sounds good goals for my 94 Impala
Thanks man 😎 What color Imp do you have??
Black BBB 84 original miles not an everyday driver only when it's nice in Denver
hell yeah man!!!
Is that the original engine that came in it
Original block, yes. With a .030" over bore and pistons and ported aluminum heads.
Sounds great
Thanks man. Was hoping to go to generation gap today, but didn't get my shifter in. Did you go?
What made u go ahead and go ls...im thinking about doing a swap in my impala ss
@lssleepers6464 I hurt a piston in my LT1 last year and with the power level I want, the LS will be able to handle it much easier
I miss those old big body on frame boats
I’ve got a LC9 5.3 with 799 heads that’s going in mine. I thought about going the nitrous route but have decided to do a single turbo set up instead. My caprice is stock for now though haha
Awesome 😎 LC9s are great. I don't blame you for going single turbo. Nice not to have to fill bottles and turbo noises are cool. I just put my motor together and bolted it in last weekend, so I should have a first start video coming soon 🤞
Just picked up a 96 caprice today. I enjoy your videos!
Sweet, what color is your 96? Does that mean you have the floor shifter too then? 😎
That Hitch !!!
It comes in handy haha. Used it for a drag and drive event last year and towed my golfcart to the track for a different event 😎
Subway and the dollar store??? This guy must be rollin' in it.
We roll deep hahaha 🤣🤣🤣
I remember when these things were brand new cop cars. Cops totalled 2-3 a weekend for a while. A bitch to tune up and maintain but fun to drive.
Could you beef up my 96 lt1 ?
I don't run a shop or anything, just working on my own stuff for now. I could give you advice though. Are you local to Minnesota?
What’s the exhaust setup? Wanna do something similar to a 94 Fleetwood
Flowtech Afterburner Long tubes, 2.5" x-pipe I built then electric cutouts from jegs and cherry bomb turbo mufflers that tame it down when I don't want to be obnoxious
Nice Sound! Next you should invest in the suspension..... ;)
Thanks! Yessir, It's on lowering springs and monroe severe service shocks now with air bags in the rear