Пікірлер

• 
  @xavierstapleton97802 күн бұрын

  what's the name of the stand you are you here?

• 
  @videographerstuff5392 күн бұрын

  It’s a beast of a short stand by Godox. GODOX SA5015 HD STEEL ROLLER STAND 168cm

• 
  @AMLagoni7 күн бұрын

  Hi! Is it possible to use the Mics directly when filming on an iPhone, instead of the Build in mic on the phone?

• 
  @videographerstuff5397 күн бұрын

  Hello, yep you sure can, there’s a supplied cable you get with the kit that you plug the receiver into your iPhone, then the two mics are ready to work straight on your phone. The cable is usbc to lighting. New iphones is usbc to usbc. 1 × SC21 USB-C to Lightning cable

• 
  @glockmaster779 күн бұрын

  you can correct it in post

• 
  @videographerstuff5396 күн бұрын

  Have you seen any good presets for it?

• 
  @marcopocetta865417 күн бұрын

  Congratulations on the video. I found it very interesting, I have a Rode Wireless Pro with a COS 11D It seems to be going into saturation, What sensitivity do you recommend setting on the TX to avoid this saturation? In your opinion, what are the best settings to pair the Rode Wireless Pro with a COS 11D?

• 
  @videographerstuff5392 күн бұрын

  Hey there, Does the onboard recording seem over saturated as well?

• 
  @marcopocetta86542 күн бұрын

  @@videographerstuff539 yes

• 
  @fluff199120 күн бұрын

  awesome man. good to know. i mic 2 rugby players up with lav in a GPS sports bra and the signal cuts in and out but that was expected. sometimes i can hear the audio and they are 50meters away.

• 
  @videographerstuff53918 күн бұрын

  Nice work! Do they ever get damaged from tackles? Brilliant that the onboard can cover the gaps though 😄

• 
  @mahutaproductions849820 күн бұрын

  Hey man, just playing with mine I just got. I'm surprised to hear a brushing sound from the belt that changes with the speed setting. It's more noticeable at slow speeds. It's not loud or anything but in a silent room you definitely hear it. Does yours also do that? I think I faintly hear it in the video but not sure.

• 
  @videographerstuff53918 күн бұрын

  I wonder if there’s a batch that’s been louder than others? With mine I can hear it but not enough to catch in lav or boom mic. How heavy is rig you’re putting on?

• 
  @mahutaproductions849818 күн бұрын

  @@videographerstuff539 I talked with them and apparently it was because I was using DC power too strong (like an idiot..). I've ordered some NP-F to test, with a less powerful but still too powerful supply it was doing it much less already.

• 
  @videographerstuff53918 күн бұрын

  Wow I didn’t expect that as a reason! Glad it was something simple!,

• 
  @FluidPrompter24 күн бұрын

  Thanks for the simple demo of the new bracket! I have a residential ceiling height and want a low profile hair light. This mount looks to be the best option. My only remaining concern is fan noise on the F22x. But may give it a go.

• 
  @videographerstuff53924 күн бұрын

  Thanks! I don’t think I’ve ever had a problem with the fan noise for that one. It has a good length head lead between the controller box and the light, So you can keep it away from the mic.

• 
  @Tech4YourNeeds25 күн бұрын

  What happened to the backup? I own the Rode Wireless Go II.

• 
  @videographerstuff53925 күн бұрын

  Yes the backup is totally an option but I wanted to monitor the audio as we were shooting. So not hearing it as we went wasn’t an option.Plus I hadn’t done the timecode sync.

• 
  @a_n_u_r_o_o_p28 күн бұрын

  Thanks for the video 👍🏻

• 
  @videographerstuff53928 күн бұрын

  My pleasure! It’s a pretty amazing lens. I pretty much use it on every shot now. I love it

• 
  @melodychest902029 күн бұрын

  Good comparison and presentation .. this is the FL prime that is beckoning me for my old 5D IV set up. I have good Canon and Zeiss wide angle prime lenses and this one I should get. Canon it will be for the colours, just looks more right. Cheers, nice one.

• 
  @videographerstuff53928 күн бұрын

  Thanks! Yeah she is a beauty, and paired with the mark 4 you’d be a very happy human!

• 
  @TimSladeeLearningАй бұрын

  Did you have any issues with the calibration? I just got mine and when I turn it on, the calibration squeals the motor and vibrates the belt.

• 
  @videographerstuff539Ай бұрын

  Hey mate, nah, it should be near silent. Have you checked the screws that hold the belt on? Maybe they are loose, or maybe they sent you a dud. I’ll pop an example of my ones calibrating up shortly. Sorry to hear that btw!

• 
  @TimSladeeLearningАй бұрын

  @@videographerstuff539 No worries! I appreciate it! I suspect it’s a dud. I tried everything and it sounds like it just grinding the motor when it gets to the far end of the track, as if it doesn’t detect it’s at the end.

• 
  @videographerstuff539Ай бұрын

  What a pain, hopefully it’s an easy return and swap to another one!

• 
  @creativegreatsvisualsАй бұрын

  you stated using the 1+2 on a single output works quite well.. how does it work when you use the zoom sound recorder into the c70 ? what cables are u using from the zoom into the c70 and what cables are you using from the zoom into the diety theos receiver ?

• 
  @videographerstuff539Ай бұрын

  Hey, when I refer to the zoom recorder, I mean that separately to the c70, as in, the zoom recorder is taking the audio and not the c70. I would then sync the audio with the c70 footage in Final Cut. The cables I’m using from Theos to the zoom f6 are 3.5mm to xlr cables from deity.

• 
  @mahutaproductions8498Ай бұрын

  I was looking for vids about using RS3 pro with sliders and here you are with the exact slider I had in mind. I guess this is the poor man's motion control. I've been wanting a slider for a while and a change in my business focus might justify finally getting one, but I was wondering if I could pair it with the gimbal like here and achieve repeatable movements, or would I need something like the Zeapon with Pan/Tilt head for that (or is there another alternative I'm not thinking of).

• 
  @videographerstuff539Ай бұрын

  Yeah the value proposition was there for me with this slider. I haven’t had time to test if you could do repeatable gimbal moves. The start timing for the gimbal and slider would be hard to execute. I think it would just be pressing go and the same time. Hopefully it’s that simple and works well. Once I get a day off I’ll try give it a go.

• 
  @mahutaproductions8498Ай бұрын

  ​@@videographerstuff539Thanks for the quick reply. That would be great! I'd love a longer vid with a bit more detail on operating these two together?

• 
  @bramhamohate9510Ай бұрын

  Sir I'm going to begin my career in photography and I'm from India and think to purchase new camera as canon rp with samyang 85mm 1.8 or 1.4

• 
  @videographerstuff539Ай бұрын

  Hi, the general benefit to the 1.4 is that you can take photos in darker situations as well as the great look for portraits of the really blurry background. The sweet spot for the 1.4 would be using it at 1.8 or 2. Generally with lenses 1 or 2 stops up from wide open is the sharper spot. Hope that helps. Best of luck on your journey!

• 
  @larswannop5942Ай бұрын

  Thanks, this is great. Currently assesing a job offer of 3 day per week pro-rata or freelance at a higher rate. Great video helpful to break down the details to work out how to know which is best for my situation and blend of work, freedom, security.

• 
  @videographerstuff539Ай бұрын

  Great to hear! Best wishes for which ever way you go with :)

• 
  @jcharlesguichardАй бұрын

  Great video. I've got the same problem setting up Theos with FX3 or A7S3+K3M audio unit. Line level is way too low. And mic level brings tons of noise because I have to crank up the gain so much on the TX.

• 
  @videographerstuff539Ай бұрын

  Thanks! Hopefully they fix it with a firmware update soon

• 
  @DADA-wn2ojАй бұрын

  do you have any thoughts on the actual transmitter / receiver system quality? I already have the sanken cos 11d and a couple of sets of sennheiser g4 wireless packs.. just wondering if you have found any quality difference between this and the rode go pro packs? (not taking into consideration the 32 bit float - just purely the quality of audio it sends into the camera)

• 
  @videographerstuff539Ай бұрын

  Hey, I haven’t used the G4’s, but I had the g3 set. My biggest problem with those were getting interference every now and then, like that short ‘spark’ kinda sound. Used to kill me having to hand audio in with that. Since having the RØDE’s I’m yet to have an interference problem (without pushing distance) and I’m 100% happy with the quality the cos 11 into it gives me. It really is a good combination in my opinion. I set the rx unit to ‘split’ so that I get each channel on its own track on the camera. If I stuff up and bump the audio dials on the camera during a take I love having the safety on the onboard recording as back up.

• 
  @darrencoatesАй бұрын

  Do they offer an option with a curved spigot part?

• 
  @videographerstuff539Ай бұрын

  It’s only a straight one coming straight out the back, you can use the ‘tilting stand mount’ that comes with the original kit. I used that today and it’s fine for basic right angle use at 45degree angle but I wouldn’t trust it over head or anything like that. Much safer to use it with a grip head instead. That’s what I do most of the time

• 
  @gordonyoung1970Ай бұрын

  Can it be powered by a seperate power bank ? od must you use a battery fitted

• 
  @videographerstuff539Ай бұрын

  You can use a barrel connector into a d-tap cable and power it that way via a battery. Or just use the dummy battery into d-tap as well.

• 
  @fluff1991Ай бұрын

  just a suggestion, it might be silly but it may good to have the current price (not on special) of each mic so we know if its worth it.

• 
  @videographerstuff539Ай бұрын

  Thanks for the suggestion 😀

• 
  @petercofrancesco9812Ай бұрын

  I'll save you the trouble the best sound one is the most expensive (Sanken Cos11)

• 
  @rogerk9021Ай бұрын

  Fire 3 shots and put them together in Adobe. Much better.

• 
  @videographerstuff539Ай бұрын

  Sounds like a plan 👍

• 
  @patricioderito37222 ай бұрын

  The next camera is gonna be the C70 but full frame. Can't wait

• 
  @videographerstuff5392 ай бұрын

  Me either 🤞

• 
  @LonzosStudios4 күн бұрын

  prophet

• 
  @Bruce-Weinberg2 ай бұрын

  Mine should arrive Friday. Thanks for showing me what I’ll be doing this week!

• 
  @videographerstuff5392 ай бұрын

  Hope it has arrived safely:)

• 
  @itsgthompson2 ай бұрын

  Appreciate this comparison, the Cos 11 are workhorse labs and built to last, they can really take a beating. The difference seems small but the clarity and punchiness are big improvements for me, If placing a lab the difference sounds similar to a burried mic vs one that has some 'air' to it and much more desirable. I'm sure some EQ could reduce those muddier tones in the Rode Lav but bang for buck if audio is your thing, the Sunken Cos 11 is a no brainer. I really wished the Rode wireless pro TX's provided enough power for my DPA 6060's but the Cos 11 is a great mic and mic nicer to hide because of the smaller form factor despite the thicker cable.

• 
  @videographerstuff539Ай бұрын

  I haven’t tried a dpa6060, I’ll have to find one to test one day!

• 
  @queenb7032 ай бұрын

  Hi, Will it work on DJI RS3 Gimbal? 😊

• 
  @videographerstuff5392 ай бұрын

  Yeah I’m sure it would, as long as you took the battery off the gimbal and used the adapter to power it otherwise the gimbal would be too high in the centre of balance would be out of place.

• 
  @TheRabidmilkman2 ай бұрын

  This is way better than the setup instructions they included. Thank you!

• 
  @videographerstuff5392 ай бұрын

  Glad it helped :)

• 
  @umberto83832 ай бұрын

  Se ti avvicini troppo è normale che non mette a fuoco!!!

• 
  @videographerstuff5392 ай бұрын

  Minimum focus distance is ok. Great focal length

• 
  @maheshgvelly2 ай бұрын

  Can you do a dolly zoom ( vertigo shot) on this slider ?

• 
  @videographerstuff5392 ай бұрын

  Haven’t had a chance to try

• 
  @247.mp4Ай бұрын

  Should be possible in 2 ways but with limited effect range due to the short length of 60cm. One way would be to slide the Camera towards you and adjust the zoom in post, the other using a focus motor for the zoom.

• 
  @Lookacademy2 ай бұрын

  Thanks!

• 
  @videographerstuff5392 ай бұрын

  Cheers

• 
  @lewiswright40382 ай бұрын

  I have found with the small rig cage because of the flex and no lock River on the right side/shooting button side after a day of taking pictures due to wiggle and flex squeezing that grip the cage can become lose and you have to ret tighten the base

• 
  @videographerstuff5392 ай бұрын

  Is it enough to make you change to a different one, or are you going to bear with it?

• 
  @matadormartin2 ай бұрын

  I have the Rode Wireless Pro at the moment and I find the Lav II to be ok, but if you want to hide the mic under clothing I find it pretty tricky. Have you tried that? I will likely buy a Sanken in the future but in the meantime would be good to hear any tips if you've every tried to hide the Rode Lav II.

• 
  @videographerstuff5392 ай бұрын

  Hey mate. Yeah very tricky with the forward facing capsule and the back that pulls off with rode lav ii, but I’ll pop up a video in the coming days with a work around for you.

• 
  @matadormartin2 ай бұрын

  @@videographerstuff539 Oh that would be great! Thanks!

• 
  @kenhuang38202 ай бұрын

  Does anyone know for Canon version the high speed sync which use to have an issue with older version, does pro version fix the issue wil lthe high speed sync work with TTL now? Connecting the Godox V1 Pro to canon camera especially to mirrorless R series camera, if high-speed sync and TTL combine effectively to achieve the correct exposure?

• 
  @videographerstuff5392 ай бұрын

  I haven’t had any issues with high speed sync using it on r5. But I’m generally shooting in manual mode on the flash and not TTL. I’ll give them both a go in TTL and report back.

• 
  @mahutaproductions84982 ай бұрын

  There's no need to chase the latest versions of everything, skipping as many generations as you can get away with is the smart way. Purchase something when you know you're gonna need it, if you don't need it right now maybe wait for the newest models to come out if the current ones are due a refresh, but otherwise just get the gear you need when you need it.. As for the adjustment on the RS3 pro I agree the lateral one is a weak point and feels strangely low-tech compared to the other ones. It requires a strong but precise grip but eh, it's a mild inconvenience at worst, I'll be sticking with mine for many more years I'm sure, or until it breaks.

• 
  @videographerstuff5392 ай бұрын

  You are 100% right on!

• 
  @AllThingsFilm12 ай бұрын

  I currently run with the Sony FX30. I've been looking at the C70 for a while as a possible upgrade. I am looking at other cameras/brands as well. But, the C70 has a lot of great features for the price.

• 
  @videographerstuff5392 ай бұрын

  Do you think you’d keep the fx30 as well as getting another camera?

• 
  @fotografkennethlund2 ай бұрын

  DJI seems to have dropped the RS4 right now :)

• 
  @videographerstuff5392 ай бұрын

  Thanks heads up, just viewed. I think I can keep my credit card in my wallet for this one :)

• 
  @fotografkennethlund2 ай бұрын

  @@videographerstuff539 right, but brace yourself - "THIS CHANGES EVERYTHING" videos are coming.......

• 
  @videographerstuff5392 ай бұрын

  And they would have been recorded days ago hahaha 🤣

• 
  @fotografkennethlund2 ай бұрын

  I'm sure the giant Aputure bag is for your light assistant !! Imagine how easy it would be to bring them on a shoot ! :D Just roll'em in, jump out and get going within minutes of unfolding their legs 🙈

• 
  @videographerstuff5392 ай бұрын

  Haha I love this!

• 
  @fotografkennethlund2 ай бұрын

  @@videographerstuff539 Right - it's not the unfolding we asked for, but the unfolding we need :D

• 
  @akseft2 ай бұрын

  What about LUTs? Did you install custom? I had facing with program and Program ID. I should to send it ID to manufacture, that they to send me key for use program and install LUTs.

• 
  @videographerstuff5392 ай бұрын

  I could load luts on but they just looked green or purple, so not useable. Still trying to work out if it’s me that done it wrong 😑

• 
  @akseft2 ай бұрын

  @@videographerstuff539 Nailed it. MAnufactire sended me key. First I got the same problem. But I tried to change size of LUT from 17 to 33, and it began to work. Not perfect, but not green, yellow or purple.

• 
  @videographerstuff5392 ай бұрын

  Ok so you had better luck with 33, I’ll give each of them a try

• 
  @yaronharel84632 ай бұрын

  What body did you use? And is the lens EF or RF?

• 
  @videographerstuff5392 ай бұрын

  Both lenses are the EF version and I used the canon adapter to use on the canon r5c.

• 
  @judittoth44402 ай бұрын

  Are theese wheels compatible with any brand, or Just the neewer c stands? Thank you 😊

• 
  @videographerstuff5392 ай бұрын

  Hey! In the product description for these Neewer wheels it says ‘only for neewer c stands’. I think you can buy generic ones. What brand of stands do you have?

• 
  @TOM-wn3sc2 ай бұрын

  Whats with the music? Are reviewing a lens or cows?

• 
  @videographerstuff5392 ай бұрын

  Haha! Country is so in right now, gotta get onboard 🤠

• 
  @zboyjoker2 ай бұрын

  Dude your video are good Keep the work mate

• 
  @videographerstuff5392 ай бұрын

  Very kind!

• 
  @DroseMr2 ай бұрын

  Sounds like a great journey! Thank You

• 
  @videographerstuff5392 ай бұрын

  Thanks heaps! Enjoy the ride 😀

• 
  @Thedroneborneo872 ай бұрын

  Good video👍

• 
  @videographerstuff5392 ай бұрын

  Cheers mate!

• 
  @rosaeoldacre26342 ай бұрын

  Cleannn❤

• 
  @CINEMAWORX2 ай бұрын

  The tilts cages are wack!! Small rig is way better!!

• 
  @videographerstuff5392 ай бұрын

  Thanks for the comment! I like what you’re putting down 😀

• 
  @jonagreyphoto3 ай бұрын

  I just got the S60 today! Do you know if you can set ‘A-B’ points on loop on the RS3 Pro? Would be a cool robot arm feature if you could sync them 🤩

• 
  @videographerstuff5393 ай бұрын

  Great to hear! I’m not sure if you could sync them together, but you could try the ‘create’ menu in the DJI app and set up a ‘track’. It would be pretty hard to time it so it repeated at the exact same time though. Definitely worth a crack though!

• 
  @_burd3 ай бұрын

  The mics are certainly on a par quality-wise, but it would be mistaken to compare them as 'apples to apples' as they use fundamentally different approaches to achieve the same quality. But I don't think that makes the lav2 a writeoff by any means... The Rode uses a larger, cheaper capsule that achieves that quality through its sheer size but then their industrial engineers have to pay for that quality vs cost saving deal by being limited to orienting the capsule off-axis to the cable only. The COS11 instead uses a tiny but much more expensive capsule to achieve (basically) the same quality. By approaching that way, they are able to maintain the much more versatile 'on-axis' design and make it even smaller than standard lav mics. All decisions and compromises considered, the RODE still has a very unique selling point and that's the price, but if you can afford to deal with the off-axis capsule. Currently their approach is 'just don't mount it internally' but that's half the purpose of a lav to begin with. However, I actually think there is scope to make it work, and work well! It just needs a mount. I've talked to RODE about this issue (amongst others) on the Lav II and for the 'off-axis' compromise, I suggested they make a new Invisilav product (that's also not made of silicone because it sticks to nothing, including their own adhesives 😅) for the Lav II that would create separation infront of the capsule to prevent any contact noise, whilst still being able to tape both sides of the mount. They're gonna take the idea to the team and see what can be done, so here's hoping! :) If they can do it well, it would effectively remove 90% of the remaining selling points still in favour of the COS11 (the remaining 10% being rigging situations where having a really tiny lav is just needed), and at a much more competitive price!

• 
  @videographerstuff5393 ай бұрын

  Thanks for the comment. Maybe they could look at an option that inserts under the skin 🤣 jokes, But I agree, it is a great mic especially if you are happy to mount externally. For the price it’s a great option. I wonder if URSA is working on any options for them?

• 
  @davidp1583 ай бұрын

  As with many side-by-side comparisons, the Sanken Cos 11 does sound marginally better. By themselves, few people would ever know the difference, myself included. I suspect the smaller size, top mounted capsule and longer/more durable (?) cable are more important advantages. Still, I'm not disappointed by what I hear from the Rode mic, especially considering Rode includes two of them with the Rode Wireless Pro.

• 
  @videographerstuff5393 ай бұрын

  They are a well priced option for sure and do have a sound quality that is usable in a lot of situations. Next time im on set with a soundo I’ll get their opinion as well.

• 
  @LucioBusaPhotography3 ай бұрын

  hi, how much time works with the lights led of 120w or 220w (also just at about 50% of power) for example? thank you.

• 
  @videographerstuff5393 ай бұрын

  Hey there! I’ve only had time to test the following: Battery half full at 48% on a 60w light at 100% brightness- it lasted 34mins. I’ll do more tests in coming weeks.

• 
  @LucioBusaPhotography3 ай бұрын

  @@videographerstuff539 good, Aldo with a more powered lamps?.

• 
  @MichaelRyannz3 ай бұрын

  I have the smallrig cage you show and the Battery Grip Cage.. Both where frustrating to use and by the looks the Tilta one could present a lot of problems as well. They both block the lense release button for a start. On the other hand I purchased the Kondor Blue R5C cage, should have done that from the get go. Super rigid, zero twisting, the lense release is easy to access. Very well thought out.. I only ran into issues when I brought the Cotton Carrier Vest (Super Awesome) because the arcus plate they supply does not exactly match the V mount plate that I have for smallrig.. won't slide in..

• 
  @videographerstuff5393 ай бұрын

  Thanks for the comment! Yeah I haven’t had a chance to try the kondor blue cage. That clearance around the lens release look great on the kondor. I agree that is a pain point for me on both Tilta and Smallrig. Man that cotton carrier looks awesome, so you rate yours?

• 
  @MichaelRyannz3 ай бұрын

  @@videographerstuff539 It's been the best way to carry my camera period, I have fallen down stairs lol with the camera attached to it and fallen off my bike . Really random incidents but the camera and lenses survived.. I am looking at attaching a Focusrat to the safety clips to extend its use even further.. I have a cheaper option to test my theory for that arriving soon.. that will mount to the vest..

• 
  @videographerstuff5393 ай бұрын

  Glad you and your gear survived the falls! Sounds like with the rat, it will be an all purpose beast!