What is name of this string? Can I buy this kit online?
@ceciletou49572 ай бұрын
Thank you for this video,and for sharing.😃
@ceciletou49572 ай бұрын
Another great video.Thank you so...much for sharing.😃
@aydaguillen2 ай бұрын
desde Colombia muchas gracias lo hice para mamá 😍😍😍😍😍
@ceciletou49572 ай бұрын
Another great video.Thank you for sharing.This is my second bracelet that I made.You are number one teacher.Thank you so.....much.😃Have a nice day.
@ceciletou49572 ай бұрын
I am so....happy that I found your video.Thank you so much for sharing.I have made my first bracelet.You are a good teacher.😃
@santoshinidas20633 ай бұрын
Ty❤❤
@mokuho4 ай бұрын
How to adjusting this on wrist without help? 😢
@sherrieowens91954 ай бұрын
Beautiful
@wrenbyrd10935 ай бұрын
I learned how to make the bracelets like this with the same string as the bracelet as the barrel knot, but you could only adjust the knot on one side. So I see you need an extra piece of string to have a double sided adjustment. 👍👍 I’d put a dab of the glue on the hanging ends too.
@nawangmiracles1296 ай бұрын
Thanks❤
@mayakareem58047 ай бұрын
Very nice i love it so
@khaye097 ай бұрын
what kind of string did you used
@onesmilestone7775 ай бұрын
26 gauge wires
@mazadan7 ай бұрын
Bonny
@catherinegrout15138 ай бұрын
The beads are beautiful. Are they amethyst? Thank you for your generosity in sharing your designs that newbies like me feel up to doing... 😊
@onesmilestone7775 ай бұрын
thanks! yes they are lavender amethyst
@catherinegrout15138 ай бұрын
What beads are you using? Amethyst?
@sofiacardenas560010 ай бұрын
😊hermosa
@jinnmi25110 ай бұрын
Can we use gear wire (tigertail wire) for making this?
@onesmilestone7775 ай бұрын
you can use tiger-tail wire but you would need an end cap since the tigertail wire are not able to twist and close the ending.
@jinnmi25110 ай бұрын
Can we use 0.3mm wire?
@angiem469211 ай бұрын
Brilliant simple tutorial 🙏 love it without all the chatter …. It helps you concentrate more on looking at what you’re actually doing …. 👏
@user-yr5kv9iz2f11 ай бұрын
Si
@balvindertiwana734911 ай бұрын
I m just a beginner I made it Thanks a lot
@shood3511 ай бұрын
I just love it when actual measurements are given. So many don't do that. You're just supposed to watch and "figure it out". Loved this. It was fabulous. Will be fun to try later. Thank you so much!
@meljanerodaje39153 ай бұрын
haha
@alynacastorena1428 Жыл бұрын
where did you get the charms ?
@vaniangelinaa Жыл бұрын
how long that cords?
@onesmilestone7775 ай бұрын
approximately 45 inches or longer. You can always cut the extra cord in the end.
@wiloka28 Жыл бұрын
Just what I was looking for. Thank you 😊 ❤
@mrssabir2089 Жыл бұрын
Thanks 😊
@patriciagaddy7710 Жыл бұрын
It would be nice if you can tell many time do you twist the wires.
@ClaudieCaracol8 ай бұрын
It states to twist 3-4 times right in the video caption
@debbijay Жыл бұрын
Thank you so so much for this most excellent tutorial!! LOVING your beginning and ending!!! Love it!
@debbijay Жыл бұрын
Beautiful, and easy to understand tutorial , thank you so much!!!
@nhiennguyen1680 Жыл бұрын
It beautiful but your hand blocking most of what u doing
@gisellefajardo-ye2vw Жыл бұрын
Here is how to make the simple sliding knot bracelet if you were having trouble with the video. You need 15 inches of string and one 8mm bead and 4 3mm beads. First you start by putting the 8mm bead into the string and then through each side put one of the 3mm beads and once you have done that tie a knot on each of the sides.( if your having trouble with getting the beads through use some wire to help)once you have done that measure it to your wrist and then overlap the ends to create the sliding knot once you have overlapped the string you can use some tape if your string is moving then you put a about a 8 inch string on top and tie a loose knot then take either the left side or the right over the string and then the remaining string over the top then under and through the opposite string and then pull but not tight and repeat on the opposite sides. And once you have gotten it to your desired length cut the excess string and burn it with a lighter so it wont frill or untie then tie a knot on the ends of your bracelet and take a 3mm bead and put it on the ends and tie a knot and cut and burn the remaining string to seal the bracelet . I hope this is helpful.
@thatnaingthatnaing-fg8sy Жыл бұрын
သင်ပေးပါအုံရှင်❤❤❤❤❤ 😊😊😊😊ငုဝါ
@nathaliescouvemont5454 Жыл бұрын
Merci beaucoup pour ce tutoriel très bien fait ! ❤👍
@Mulakalaky Жыл бұрын
Good loops!
@katharinebloodworth2638 Жыл бұрын
Thank you for sharing For use fledging beaders I think I can actually do this! I am so excited to give it a try.
@Sasahcute Жыл бұрын
beuty bracelet !!!
@keziahsanthoshkumar Жыл бұрын
what else could we use if we did not get the cord.
@onesmilestone777 Жыл бұрын
You can use any cord you like, waxed cord, cotton cord, nylon cord, etc. as long as the cord size are able to thread into the bead’s hole.
@lisandram.camargochacon5015 Жыл бұрын
😍😍😍😍
@precious_jam1232 Жыл бұрын
Wire size?
@onesmilestone777 Жыл бұрын
26 gauge wire
@suechambers8978 Жыл бұрын
How do I fix this knot when it comes apart?
@onesmilestone777 Жыл бұрын
if only the ending of knot comes apart then you just need to glue the ending part of the remaining knot. if the whole sliding knot is comes apart then you need to make a new one.
@KhencySaberola Жыл бұрын
Thank you so much ❤
@florangelfigueroa7860 Жыл бұрын
Gracias, estoy en la etapa de aprendizaje y tengo que repetirlos muchas veces para lograr un buen resultado, no me rendiré, Gracias de nuevo
Пікірлер
what size crimp tube was used?
Beads size pls
Medium
@@basheerclarimohamed83036mm and 3mm
6mm and 3mm beads
@@carleenscorner8287 thx sis
Also what colour of the wire and wire size pls
What is name of this string? Can I buy this kit online?
Thank you for this video,and for sharing.😃
Another great video.Thank you so...much for sharing.😃
desde Colombia muchas gracias lo hice para mamá 😍😍😍😍😍
Another great video.Thank you for sharing.This is my second bracelet that I made.You are number one teacher.Thank you so.....much.😃Have a nice day.
I am so....happy that I found your video.Thank you so much for sharing.I have made my first bracelet.You are a good teacher.😃
Ty❤❤
How to adjusting this on wrist without help? 😢
Beautiful
I learned how to make the bracelets like this with the same string as the bracelet as the barrel knot, but you could only adjust the knot on one side. So I see you need an extra piece of string to have a double sided adjustment. 👍👍 I’d put a dab of the glue on the hanging ends too.
Thanks❤
Very nice i love it so
what kind of string did you used
26 gauge wires
Bonny
The beads are beautiful. Are they amethyst? Thank you for your generosity in sharing your designs that newbies like me feel up to doing... 😊
thanks! yes they are lavender amethyst
What beads are you using? Amethyst?
😊hermosa
Can we use gear wire (tigertail wire) for making this?
you can use tiger-tail wire but you would need an end cap since the tigertail wire are not able to twist and close the ending.
Can we use 0.3mm wire?
Brilliant simple tutorial 🙏 love it without all the chatter …. It helps you concentrate more on looking at what you’re actually doing …. 👏
Si
I m just a beginner I made it Thanks a lot
I just love it when actual measurements are given. So many don't do that. You're just supposed to watch and "figure it out". Loved this. It was fabulous. Will be fun to try later. Thank you so much!
haha
where did you get the charms ?
how long that cords?
approximately 45 inches or longer. You can always cut the extra cord in the end.
Just what I was looking for. Thank you 😊 ❤
Thanks 😊
It would be nice if you can tell many time do you twist the wires.
It states to twist 3-4 times right in the video caption
Thank you so so much for this most excellent tutorial!! LOVING your beginning and ending!!! Love it!
Beautiful, and easy to understand tutorial , thank you so much!!!
It beautiful but your hand blocking most of what u doing
Here is how to make the simple sliding knot bracelet if you were having trouble with the video. You need 15 inches of string and one 8mm bead and 4 3mm beads. First you start by putting the 8mm bead into the string and then through each side put one of the 3mm beads and once you have done that tie a knot on each of the sides.( if your having trouble with getting the beads through use some wire to help)once you have done that measure it to your wrist and then overlap the ends to create the sliding knot once you have overlapped the string you can use some tape if your string is moving then you put a about a 8 inch string on top and tie a loose knot then take either the left side or the right over the string and then the remaining string over the top then under and through the opposite string and then pull but not tight and repeat on the opposite sides. And once you have gotten it to your desired length cut the excess string and burn it with a lighter so it wont frill or untie then tie a knot on the ends of your bracelet and take a 3mm bead and put it on the ends and tie a knot and cut and burn the remaining string to seal the bracelet . I hope this is helpful.
သင်ပေးပါအုံရှင်❤❤❤❤❤ 😊😊😊😊ငုဝါ
Merci beaucoup pour ce tutoriel très bien fait ! ❤👍
Good loops!
Thank you for sharing For use fledging beaders I think I can actually do this! I am so excited to give it a try.
beuty bracelet !!!
what else could we use if we did not get the cord.
You can use any cord you like, waxed cord, cotton cord, nylon cord, etc. as long as the cord size are able to thread into the bead’s hole.
😍😍😍😍
Wire size?
26 gauge wire
How do I fix this knot when it comes apart?
if only the ending of knot comes apart then you just need to glue the ending part of the remaining knot. if the whole sliding knot is comes apart then you need to make a new one.
Thank you so much ❤
Gracias, estoy en la etapa de aprendizaje y tengo que repetirlos muchas veces para lograr un buen resultado, no me rendiré, Gracias de nuevo
Bellissimo 🥰🥰
Nice 😊🥰
Thanks, helpful!
Wow, love it. Again excellent camera work!
Your camera work is excellent 😊