Пікірлер

• 
  @sepesanayagodamu28843 күн бұрын

  How many parameters are enabled on a grandMA3 Light console when it is operated in Mode 3 with software version 1.7 or higher?

• 
  @lightologyau3 күн бұрын

  With the release of grandMA 3 Version 1.7, The parameter count was increased to the following: • grandMA3 full-size - 12,288 --> 20,480 • grandMA3 light - 8,192 --> 16,384 • grandMA3 compact - 4,096 --> 8,192 • grandMA3 onPC command wing - 2,048 --> 4,096 Follow this link : www.malighting.com/files/malighting/user_upload/Stories/grandMA3/grandMA3_SW/MA_grandMA3_Parameter_comparison_2022-03.pdf For the official document from MA Lighting about the upgrade.

• 
  @jayhergen4 күн бұрын

  First of all, thank you for making this. I find there are so many things in MA3 Phasers that do not come inherently to me unlike in MA2 effects. In this video at one point you mentioned for step 1, you added a width of 160 only for the tilt, why? I mean not so much you need to answer that specific question, it's more how am I supposed to know that when sitting down on the console? Is there any video you know of that goes threw step by step about what each tool in the phaser window is used for and why they would be used? MA and ACT seem to have no interest in making anything available and it's just crazy to me since phasers are one of the biggest changes in the MA universe.

• 
  @lightologyau3 күн бұрын

  You're absolutely right, adjusting to the Phaser workflow can definitely be challenging! And we appreciate your question and feedback - it's exactly this kind of engagement that's inspired us to start creating more targeted tutorial videos based on what the KZread community wants to know, including the Phaser Toolbar. We understand that the limited official training materials can be frustrating. MA3 is a vast and rapidly evolving software, and producing high-quality, accurate content takes time. This might be one reason why there isn't as much official content as we'd like. While MA Lighting and their distributors are always the most reliable source of information, we're happy to share our knowledge and experience too! If you have any more questions, we'd love to hear from you at [email protected].

• 
  @Lightguycalvin15 күн бұрын

  Riiight…..😂 0:07

• 
  @thesupremegi227521 күн бұрын

  NICEEE

• 
  @kylealbuquerque481026 күн бұрын

  You look a little like Conor Mcgregor, nice video btw

• 
  @lightologyau3 күн бұрын

  You think so? 🤔 - Thanks for supporting our Channel!

• 
  @FHNeditsHDАй бұрын

  Can you make more in-depth tutorials on phasers, timecoding etc on the Grandma3 computer version?

• 
  @lightologyauАй бұрын

  Hi! Thanks for supporting our Channel - Yes we can, New Longer format episodes coming soon!

• 
  @OLLHATESLAGАй бұрын

  Cool !!!!

• 
  @mthembubukhosi7962Ай бұрын

  It is so helpful I wish you could have made a longer video and explained it precisely.

• 
  @lightologyauАй бұрын

  Thanks for your comment! - We have heard you Fam, and we have longer videos coming to the channel this year!

• 
  @FREQUENCIES369Ай бұрын

  Great video! thanks for sharing. I have a question, is possible to stop a phaser in the last step? To stop the loop. Thx anyway!

• 
  @lightologyauАй бұрын

  Thanks for your comment!, Unfortunately as of V2.x.x.x there is not currently a tool that would act as a "One Shot" Hopefully that feature is not too far away!

• 
  @longbeach41d2 ай бұрын

  the title is TO STOMP OR NOT TO STOMP......can u tell us WHEN TO STOMP and WHEN NOT TO STOMP please?

• 
  @lightologyau2 ай бұрын

  Sure! thats a great question, A good example of when you would need to use stomp is if you are trying to use a preset to replace a phaser in a cue that does not share the same attributes that are currently in your phaser.. In your workflow, it's always best practice to try use presets that can contain the attribute data you are working with, this way you might find you will only need to use stomp as a last resort.

• 
  @lucasstory2 ай бұрын

  This channel is so good. Quick demos and explanations of very very useful MA3 features.

• 
  @lightologyau2 ай бұрын

  Thanks! We are so appreciative of the support from everyone,

• 
  @ellismarkman2 ай бұрын

  Great explanation and right to the point.

• 
  @lightologyau2 ай бұрын

  Thanks! - We are working on new videos for features added in Version 2, Let us know if there are any topics you want us to cover!

• 
  @ditzkickz2 ай бұрын

  Great video 😁

• 
  @lightologyau2 ай бұрын

  Thanks! Your Deadzone video rocks. 🔥

• 
  @cobralyoner2 ай бұрын

  I know that may sounds weird but.. really appreciate you tuning down on the gesturing in this video (: As always great content, thanks you very much!

• 
  @lightologyau2 ай бұрын

  We really appreciate the support! KZread and being on-camera is a whole new adventure, and we're so grateful for the community's encouragement as we grow.

• 
  @alexanderfdj2 ай бұрын

  What happened witht the rest of the tutorial??😅

• 
  @lightologyau2 ай бұрын

  Hi Alexander, Thanks for your Sub! - This video and more full length videos are available over at www.lightologyacademy.net.au/p/grandma3-core-concepts

• 
  @kaywon19722 ай бұрын

  👍👍👍👍👍

• 
  @genkides20112 ай бұрын

  This was a great video! TY. I am a not traditional student and just finished my Adv Lighting class. Our final was programming the MA3 console to a song of our choosing. The Prof just wanted to see us be able to program some simple cues/phasers to the song. There were a few students who had prev MA 2 experience and had some great shows. I understand basic phasers but have so many questions! This was a great explanation of how to get the lights to create this look. I found myself wondering if a idea I have is more of a cue to cue, or if its a phaser effect. Maybe how to get the moving lights to do what I want them to do. Anyways, this was a great vid. TY

• 
  @lightologyau2 ай бұрын

  Congratulations on finishing your Class!, When you have time put your other questions in a comment below, that will really help us build more content that will help you become the best grandMA programmer you can be! - and don't forget to share you pre-viz work with us so we can support your work too!

• 
  @ellismarkman2 ай бұрын

  I’m having problems understanding why this is a better solution than just updating the cue entirely with the desired position without any phaser. What is especially confusing me is why you only used half the selection in this example (in cue 3). Also, why did you choose "add new content?" I tested this out on my own and achieved the desired result using "original content only."

• 
  @lightologyau2 ай бұрын

  Hi! Great question! Stomp isn't better, just a different approach to working with your cue and tracking data. Use Stomp to clear lingering values when needed, then when you update - Choosing 'Original Content Only' or 'Add New Content' based on whether you want to change your data from earlier cues or just the current one.

• 
  @J-Gx2 ай бұрын

  Here I go thinking that I know everything about a stomp, but I had no clue about Add New Content! Thank you, again!

• 
  @lightologyau2 ай бұрын

  You're Welcome! - Thanks for watching our Content!

• 
  @centeredmovement2 ай бұрын

  This is such an excellent explanation of measure and why its such a breakthrough with MA3. Thanks so much!

• 
  @lightologyau2 ай бұрын

  You're very welcome!

• 
  @longbeach41d2 ай бұрын

  1:12. EDIT to load the cue back to programmer.....can u please tell us more about this function?

• 
  @lightologyau2 ай бұрын

  Sure, That's a great Idea - New episodes are coming every month!

• 
  @rustam_babaiev2 ай бұрын

  Thanks a lot, thats what i am really needed

• 
  @lightologyau2 ай бұрын

  Glad it helped

• 
  @ellismarkman3 ай бұрын

  This is a great explanation on the concept.

• 
  @lightologyau3 ай бұрын

  Thanks! Let us know which other concepts and features you want us to cover on the channel!

• 
  @J-Gx3 ай бұрын

  Great video! Makes me hate Art-net just a little less

• 
  @lightologyau3 ай бұрын

  Awesome! We are glad our video could help you!

• 
  @TheRJH13 ай бұрын

  Great video! Keep these coming

• 
  @lightologyau3 ай бұрын

  We have more videos coming all year!

• 
  @Bingbanglightingdesinger3 ай бұрын

  Why using Dummy channels . Can you make a video

• 
  @lightologyau3 ай бұрын

  Sure thing, We would be happy to do that for you.

• 
  @kevinnorthrup84853 ай бұрын

  This is the best explanation of this feature that I have seen. To top it off, assigning an alignment to the transition is brilliant.

• 
  @lightologyau3 ай бұрын

  Hey Kevin, Thanks for the great feedback! Now that we all have v2, we have more episodes coming that take a closer look into how we are using phasers.

• 
  @eriklarsenlt4 ай бұрын

  Looking forward to future videos!

• 
  @lightologyau4 ай бұрын

  Thanks! We have many more exciting videos planned for the year

• 
  @AktinaProductions4 ай бұрын

  Thanks for the video, I have a question. I have an onpc command wing set up and I want to add a separate line in artnet tab but the buttons aren’t visible. Also the New artnet data below the line is not existing. Do you know what’s going on ? I I probably missing something.

• 
  @lightologyau4 ай бұрын

  You're welcome! Can you let us know which software version you are using?

• 
  @AktinaProductions4 ай бұрын

  1.9.7

• 
  @lightologyau4 ай бұрын

  If you reach out to us at [email protected] one of our team will be able to guide you on how to solve your network troubles.