I have 4 different sizes of the irwins, i really do like them a lot. I have the medium size knipex, and i love them. I use the irwins more, because i usually use the smaller sizes or the bigger sizes, but no doubt the knipex is the superior product. The teeth bite so much better and they are much harder. Its easier to wear the teeth on the irwins. I havent warn them to the point they dont work, they still work well, but the knipex have broke stuff free the irwins couldnt, and much easily at that. But i do still really like the irwins and reach for them more often. The knipex i use if im ina pinch and the irwins wont bite hard enough, or i need the slimmer profile of the knipex. Being more than double the price doesnt bother me because they really are better. Like how the knipex bite better then the irwins and the teeth wear more on the irwins, i would imagine the teeth on the irwins bite better than the doyles and the teeth wear more on the doyles. But i havent used the doyles so i cant say for sure, but i have seen some review videos that did verify the teeth are more soft w the doyles. Being the irwins are cheaper and more slim design, its a no brainer to get the irwins
@jacksmith23155 сағат бұрын
The adjustable...adjustable...would be good for tie rods n tie rod ends.
@jacksmith23155 сағат бұрын
Thats not a knife...this is a knife!
@saintsx195818 сағат бұрын
Your channel is the reason i am pursuing atuo tech. looking past the bs and any drama, getting paid to make sure i get people home safe and making sure they have reliable transportation just feels so damn good !!!
@shadow779619 сағат бұрын
I have some of the Icon pliers, and they're good. But I don't like the Doyle brand so far. The first pair I bought was the needle nose wire stripping pliers, and the hinge had play in it out of the package. It's just enough to make wire stripping a pain with them. It's a shame, too, because I enjoy the Icon pliers I have. I may try to exchange them sometime in the future. I believe I'll invest in a few different pairs of Knipex off Amazon. They've got that pair for around $40. I don't mind paying a little more for something that performs well. There's just some name brand stuff that isn't copied very well. Those Milwaukee pliers look good. I've completely stopped buying Irwin. I've got those same 8" ones and the jaws don't even line up closed. Their quality has dipped too much.
@jacksmith23154 сағат бұрын
I have all 4 sizes of the irwins, i have no problems with them at all, and i use them professionally for a couple years now. Jaws line up fine. The knipex definitely performs better in stubborn fasteners and pipe fittings, but as long as its not really stubborn, like really rusted tight, the irwins work just fine. I actually reach for them more often then the knipex. I only use the knipex when i have to, like a tighter spot or too tight/stubborn for the irwins.
@ramboharrisons191720 сағат бұрын
The 1/2” Pittsburg expandable ratchet I use all the time to torque down lug nuts. On 1 3/4 ton pickup truck the lug nut would not back off for any reason because someone loctited JB welded and flared the bolt behind the nut, so only using the 1/2” ratchet I tightened the nut until the bolt snapped, no cheater bar used, the stud in 2 pieces so they are strong. That was 7 years ago and I am still using the same ratchet to this day.
@KeysdwjКүн бұрын
Yeah the knife would be better associated with Rambo rather than crocodile Dundee. In the movie Rambo he used the compass, and sowed up his arm after being wounded. Both movie knives were similar in size and shape thoug.
@adammosher1115Күн бұрын
I would buy the gold ratchet in 3/8 and definitely get the extended crescent wrench
@haroldneely2572Күн бұрын
The knife crocodile Dundee had was a solid knife I do remember Rambo having a survival knife but his compass was on the outside. By the way new sub and I'm enjoying you guys channel
@JediKidLAКүн бұрын
I like the newer Craftsman Overdrive wrenches too!
@andrewjordan2590Күн бұрын
If yall had the 4amp for Hercules it will better the 35 pft
@shadow7796Күн бұрын
I may have to pick up the mirror and wrench on my next visit to hf.
@RolandMorris-tf7bqКүн бұрын
I don't like the 1/4 and 3/8 combo extension ratchet. I prefer them to be separated. I've got a cheap Amazon 1/4, 3/8 EZ Red, Pittsburgh 1/2, and 3/4 EZ red all extension ratchets. They are awesome.
@wolfhound1aКүн бұрын
I've had the Bauer electric screw driver for about 5 years, and it works great.
@deedle6073Күн бұрын
The benefit of the flexible inspection mirror is that you can coil and prop it somewhere on the ground or surface and have it pointed to where you need to see hands free.
@joshdane5657Күн бұрын
I got that same craftsman jack. I bought it from a friend. I was gonna go with a daytona or Pittsburgh but he gave me a good deal and it came with some jack stands! Awesome video.
@aarondillon1958Күн бұрын
I think the long reach 3/8 Pittsburgh ratchet, the Quinn spark plug sockets set are the two I would add.
@donaldsartain6264Күн бұрын
Rambo knife...duh
@craigdave32662 күн бұрын
Im going to recommend the gearwrench locking flex head 1/4 then u warranty it and its not even broken but they don't ask for the old one then sell it 😂
@jocarr17912 күн бұрын
My favorites from Harbor Freight would be the swivel / roto head ratchets. I cut the plastic handle off of the 1/2" and slide a pipe over the end when I really need to motivate something. Also, the PITTSBURGH PRO 1/4 in, 3/8 in. Drive Long-Reach Dual Flex Head Ratchet is amazing and can take a beating too.
@jocarr17912 күн бұрын
That adjustable wrench might be useful for steering components.
@fuelandfreedom1892 күн бұрын
That’s not a Knife , this is a knife
@jackmoe16512 күн бұрын
maybe changing your ball hitch
@user-yj7yn4fi4l2 күн бұрын
I have a big aftermarket visor mirror I keep in my toolbox to give a wider field of view in unassailable areas as well as stick mirrors. I've also started labeling things because I've had some tools 50 years and when I'm carried from my house feet first, I hope my tools and equipment don't get thrown away because someone doesn't know what it is.
@sethpinson46942 күн бұрын
I found the icon 3/8 gold ratchet at a pawn shop for $15, so then I had to have the 1/4 gold ratchet to complete the set 😂
@brotheradam2 күн бұрын
I used to own several of the survival knives but got mine t Army/Navy stores.. usually blade took weeks to sharpen but it would cut tree branches with an effort..
@michaelphillipsBoogie12 күн бұрын
I need one yesterday, and did not have the size
@matt10743 күн бұрын
Rambo had that knife. Dundee had a Bowie knife..you guys are great
@RevolutionRoad3 күн бұрын
snapon is overpriced JUNK!! 👎👎
@w8lvradio3 күн бұрын
Wile that 8 inch knife looks diabolical and ominous, it's primary purpose is actually for cutting wood. If a fire starter that they also sell can fit in the handle of that knife, that might be quite a good survival item, indeed. You can use it to cut larger pieces of wood by "battoning" the knife. One piece blades are always more reliable than folders. While Multitools are great and you'd certainly want one as well, that large knife is just more robust in every way. Off topic, but a small hatchet is also quite useful. Weight is everything, as is durability in the field, where the tool MUST work without failing. I've been looking for something lighter than a hatchet, maybe a tomahawk as the best solution.
@monteglover41333 күн бұрын
Take a look at the Channellock 410 and/or 414 absolutely one of my favorites. Works on round and round nuts/bolts
@donaldholderby46803 күн бұрын
In my opinion doyle make s the best pliers on the market for the price
@Vaultdweller9973 күн бұрын
These guys are stoned 😎
@adampullen54873 күн бұрын
You can make the Rambo knife a lot more sturdy if you epoxy and pin the blade to handle.
@adampullen54873 күн бұрын
Love the show. Keep it up. Thanks for sharing.
@timmy45393 күн бұрын
Never repeat NEVER buy battery powered tools like drills ' sawsalls ' or Circular saws from harbor freight !! The tools work just fine but in three months when the batteries won't take or hold a charge anymore youll find out that the replacement batteries that you need have been discontinued and are no longer available !! No batteries = useless tools !! Its a scam that they pull just to get you to buy new replacement tools !!!
@TinyTerrorist-u4h3 күн бұрын
Hearing the person mumble behind a camera is annoying as fuck. If the person is going to be a part of the video, put them in front of the camera and buy a tripod for fuck sake
@browntacks7083 күн бұрын
Good content. And the vibe is the truth Blessed more ways then 1🔧😎💨
@e-train64024 күн бұрын
Links to items you review please
@jakebevington73194 күн бұрын
Reminds me of Rambo’s knife not crocodile dundees
@PriceKustoms3 күн бұрын
Yeah it does
@fredcsensits44764 күн бұрын
Craftsman also did a b gold plated rachet celebrating an anniversary
@PriceKustoms3 күн бұрын
We have a gold craftsman ratchet
@fredcsensits44764 күн бұрын
The extending handle adjustable HUSKY also.makes but have been unable to find at any home depot
@PriceKustoms3 күн бұрын
We didn’t know they had one
@general51044 күн бұрын
Nice video and THANKS for dedicating your channel to the Lord! Get the 36" D-handle MAGNET. I wish the magnet can was aluminum, because you CAN'T pick up anything you just cut. You have to let it cool off before using it or it will burn in! But it's really nice. Yiu can pick up your parts from the floor and drop them on your table, without touching tgem. Yiu can pick up tools, hammers, etc and release with a squeeze in tge handle. (It's an old tool that we used to use, made with a magnet with a hardwood dowel screwed to it and had it sitting inside a spray-paint can lid, sitting on our machines. You set the lid on your machine and move it around, then pick it up and the shavinga would follow it. Then, position it ocer a 5 gallon can and pick up the dowel snd the space diminishes between the magnet and the shavings and tgey fall off into the bucket. We, as Machinists, used tge poo out of that. This new tool is that old one on steroids..
@jontnoneya34044 күн бұрын
Another fun episode - your excitement is contagious To me - that's a Rambo knife!! That's like Sly Stalone had in First Blood. remember when he was living in the woods, running from the small town sheriff? Yeah I do remember Crocodile Dundee also but I always associated that kind of knife with Rambo.....especially since it came with matches, a compass and fishing line.
@ernestsharkey28674 күн бұрын
That’s Rambo knife 😂
@PriceKustoms3 күн бұрын
Yeah it does look like it
@DavidJohnstone-hi9kr4 күн бұрын
The DoD (government) would go for the gold plated ratchets in a heartbeat, however the price would have to be much, much higher. They would match those gold plated hammers and toilet seats we have been paying for.
@davez59414 күн бұрын
Just a few things I bought because I needed them for recent projects. The Icon Steel dead blow hammer, the 3/4" breaker bar, i am cheap so went with the Pittsburgh one, one of the blue silicone trays, because I end up always using the battery for a tool holder which isn't wise.
@charlie07420014 күн бұрын
You guys are very entertaining and wholesome, God bless!
@PriceKustoms3 күн бұрын
Thank you buddy, God bless you
@bobrhodes66524 күн бұрын
The gold ratchet is intended to use to fasten that "last" bolt or nut in a project that you finally finished that took, way way to long to complete. The anticipation of finally getting to use the gold ratchet that's been patiently waiting in your ratchet drawer pushing you to finally complete the project. It's almost symbolic.
@charlie07420014 күн бұрын
I like that explanation!
@PriceKustoms3 күн бұрын
Good point
@bulldogmack3 күн бұрын
Now I want to buy one 😂😂
@akbychoice4 күн бұрын
Waiting for the extendable extensions to become a thing.
Пікірлер
I have 4 different sizes of the irwins, i really do like them a lot. I have the medium size knipex, and i love them. I use the irwins more, because i usually use the smaller sizes or the bigger sizes, but no doubt the knipex is the superior product. The teeth bite so much better and they are much harder. Its easier to wear the teeth on the irwins. I havent warn them to the point they dont work, they still work well, but the knipex have broke stuff free the irwins couldnt, and much easily at that. But i do still really like the irwins and reach for them more often. The knipex i use if im ina pinch and the irwins wont bite hard enough, or i need the slimmer profile of the knipex. Being more than double the price doesnt bother me because they really are better. Like how the knipex bite better then the irwins and the teeth wear more on the irwins, i would imagine the teeth on the irwins bite better than the doyles and the teeth wear more on the doyles. But i havent used the doyles so i cant say for sure, but i have seen some review videos that did verify the teeth are more soft w the doyles. Being the irwins are cheaper and more slim design, its a no brainer to get the irwins
The adjustable...adjustable...would be good for tie rods n tie rod ends.
Thats not a knife...this is a knife!
Your channel is the reason i am pursuing atuo tech. looking past the bs and any drama, getting paid to make sure i get people home safe and making sure they have reliable transportation just feels so damn good !!!
I have some of the Icon pliers, and they're good. But I don't like the Doyle brand so far. The first pair I bought was the needle nose wire stripping pliers, and the hinge had play in it out of the package. It's just enough to make wire stripping a pain with them. It's a shame, too, because I enjoy the Icon pliers I have. I may try to exchange them sometime in the future. I believe I'll invest in a few different pairs of Knipex off Amazon. They've got that pair for around $40. I don't mind paying a little more for something that performs well. There's just some name brand stuff that isn't copied very well. Those Milwaukee pliers look good. I've completely stopped buying Irwin. I've got those same 8" ones and the jaws don't even line up closed. Their quality has dipped too much.
I have all 4 sizes of the irwins, i have no problems with them at all, and i use them professionally for a couple years now. Jaws line up fine. The knipex definitely performs better in stubborn fasteners and pipe fittings, but as long as its not really stubborn, like really rusted tight, the irwins work just fine. I actually reach for them more often then the knipex. I only use the knipex when i have to, like a tighter spot or too tight/stubborn for the irwins.
The 1/2” Pittsburg expandable ratchet I use all the time to torque down lug nuts. On 1 3/4 ton pickup truck the lug nut would not back off for any reason because someone loctited JB welded and flared the bolt behind the nut, so only using the 1/2” ratchet I tightened the nut until the bolt snapped, no cheater bar used, the stud in 2 pieces so they are strong. That was 7 years ago and I am still using the same ratchet to this day.
Yeah the knife would be better associated with Rambo rather than crocodile Dundee. In the movie Rambo he used the compass, and sowed up his arm after being wounded. Both movie knives were similar in size and shape thoug.
I would buy the gold ratchet in 3/8 and definitely get the extended crescent wrench
The knife crocodile Dundee had was a solid knife I do remember Rambo having a survival knife but his compass was on the outside. By the way new sub and I'm enjoying you guys channel
I like the newer Craftsman Overdrive wrenches too!
If yall had the 4amp for Hercules it will better the 35 pft
I may have to pick up the mirror and wrench on my next visit to hf.
I don't like the 1/4 and 3/8 combo extension ratchet. I prefer them to be separated. I've got a cheap Amazon 1/4, 3/8 EZ Red, Pittsburgh 1/2, and 3/4 EZ red all extension ratchets. They are awesome.
I've had the Bauer electric screw driver for about 5 years, and it works great.
The benefit of the flexible inspection mirror is that you can coil and prop it somewhere on the ground or surface and have it pointed to where you need to see hands free.
I got that same craftsman jack. I bought it from a friend. I was gonna go with a daytona or Pittsburgh but he gave me a good deal and it came with some jack stands! Awesome video.
I think the long reach 3/8 Pittsburgh ratchet, the Quinn spark plug sockets set are the two I would add.
Rambo knife...duh
Im going to recommend the gearwrench locking flex head 1/4 then u warranty it and its not even broken but they don't ask for the old one then sell it 😂
My favorites from Harbor Freight would be the swivel / roto head ratchets. I cut the plastic handle off of the 1/2" and slide a pipe over the end when I really need to motivate something. Also, the PITTSBURGH PRO 1/4 in, 3/8 in. Drive Long-Reach Dual Flex Head Ratchet is amazing and can take a beating too.
That adjustable wrench might be useful for steering components.
That’s not a Knife , this is a knife
maybe changing your ball hitch
I have a big aftermarket visor mirror I keep in my toolbox to give a wider field of view in unassailable areas as well as stick mirrors. I've also started labeling things because I've had some tools 50 years and when I'm carried from my house feet first, I hope my tools and equipment don't get thrown away because someone doesn't know what it is.
I found the icon 3/8 gold ratchet at a pawn shop for $15, so then I had to have the 1/4 gold ratchet to complete the set 😂
I used to own several of the survival knives but got mine t Army/Navy stores.. usually blade took weeks to sharpen but it would cut tree branches with an effort..
I need one yesterday, and did not have the size
Rambo had that knife. Dundee had a Bowie knife..you guys are great
snapon is overpriced JUNK!! 👎👎
Wile that 8 inch knife looks diabolical and ominous, it's primary purpose is actually for cutting wood. If a fire starter that they also sell can fit in the handle of that knife, that might be quite a good survival item, indeed. You can use it to cut larger pieces of wood by "battoning" the knife. One piece blades are always more reliable than folders. While Multitools are great and you'd certainly want one as well, that large knife is just more robust in every way. Off topic, but a small hatchet is also quite useful. Weight is everything, as is durability in the field, where the tool MUST work without failing. I've been looking for something lighter than a hatchet, maybe a tomahawk as the best solution.
Take a look at the Channellock 410 and/or 414 absolutely one of my favorites. Works on round and round nuts/bolts
In my opinion doyle make s the best pliers on the market for the price
These guys are stoned 😎
You can make the Rambo knife a lot more sturdy if you epoxy and pin the blade to handle.
Love the show. Keep it up. Thanks for sharing.
Never repeat NEVER buy battery powered tools like drills ' sawsalls ' or Circular saws from harbor freight !! The tools work just fine but in three months when the batteries won't take or hold a charge anymore youll find out that the replacement batteries that you need have been discontinued and are no longer available !! No batteries = useless tools !! Its a scam that they pull just to get you to buy new replacement tools !!!
Hearing the person mumble behind a camera is annoying as fuck. If the person is going to be a part of the video, put them in front of the camera and buy a tripod for fuck sake
Good content. And the vibe is the truth Blessed more ways then 1🔧😎💨
Links to items you review please
Reminds me of Rambo’s knife not crocodile dundees
Yeah it does
Craftsman also did a b gold plated rachet celebrating an anniversary
We have a gold craftsman ratchet
The extending handle adjustable HUSKY also.makes but have been unable to find at any home depot
We didn’t know they had one
Nice video and THANKS for dedicating your channel to the Lord! Get the 36" D-handle MAGNET. I wish the magnet can was aluminum, because you CAN'T pick up anything you just cut. You have to let it cool off before using it or it will burn in! But it's really nice. Yiu can pick up your parts from the floor and drop them on your table, without touching tgem. Yiu can pick up tools, hammers, etc and release with a squeeze in tge handle. (It's an old tool that we used to use, made with a magnet with a hardwood dowel screwed to it and had it sitting inside a spray-paint can lid, sitting on our machines. You set the lid on your machine and move it around, then pick it up and the shavinga would follow it. Then, position it ocer a 5 gallon can and pick up the dowel snd the space diminishes between the magnet and the shavings and tgey fall off into the bucket. We, as Machinists, used tge poo out of that. This new tool is that old one on steroids..
Another fun episode - your excitement is contagious To me - that's a Rambo knife!! That's like Sly Stalone had in First Blood. remember when he was living in the woods, running from the small town sheriff? Yeah I do remember Crocodile Dundee also but I always associated that kind of knife with Rambo.....especially since it came with matches, a compass and fishing line.
That’s Rambo knife 😂
Yeah it does look like it
The DoD (government) would go for the gold plated ratchets in a heartbeat, however the price would have to be much, much higher. They would match those gold plated hammers and toilet seats we have been paying for.
Just a few things I bought because I needed them for recent projects. The Icon Steel dead blow hammer, the 3/4" breaker bar, i am cheap so went with the Pittsburgh one, one of the blue silicone trays, because I end up always using the battery for a tool holder which isn't wise.
You guys are very entertaining and wholesome, God bless!
Thank you buddy, God bless you
The gold ratchet is intended to use to fasten that "last" bolt or nut in a project that you finally finished that took, way way to long to complete. The anticipation of finally getting to use the gold ratchet that's been patiently waiting in your ratchet drawer pushing you to finally complete the project. It's almost symbolic.
I like that explanation!
Good point
Now I want to buy one 😂😂
Waiting for the extendable extensions to become a thing.
That would be funny