What’s the tire size? Front and rear? Does the front tires rub? Ghx
@michaelphelps50642 ай бұрын
When moving the flaps allow the air to blow through. It will allow the engine to stay cool at idle and driving down the road.
@Nova.19716 ай бұрын
Good job.... need to see more on your Nova. I have done ton's of work to mine on my channel also !!!!
@Nova.19716 ай бұрын
Excellent job. I put QA1 coil overs and a sway bar in my Nova and did it ever improve the handling.......Just finished the rear set up.
@GreybeardGarage19727 ай бұрын
This is pretty much the exact situation with my chevelle, replaced the suspension all the way around and front disk conversion. I was on the fence about an ls swap and decided that i'm just going to build up the 350
@jonscriffignano10 ай бұрын
Not sure if i catched it but what size rear tires and back spacing?
@musclekingmedia11 ай бұрын
Your car sound like it needs timing. But that sputter could be few things. Check your plugs and if timing is good, play with the PV and squirters.
@bacwardzgarage11 ай бұрын
Appreciate it man! Just added 91 into the tank that day and was mixing so I will be adjusting timing soon when it’s only 91/93 in it 🍻
@djuanjames962211 ай бұрын
Front tires 15x7 or 15x8?
@bacwardzgarage11 ай бұрын
Front Wheels are 15x8. Same as the rears just different tire sizes. 🍻🛞
@djuanjames962211 ай бұрын
@@bacwardzgarage what size tire on the front?
@josh_71chevy11 ай бұрын
Where did you get your hood and is that a 4 or 6 inch cowl? Im trying to find a 4 inch steel cowl hood with no mesh holes in the top i like having it all open
@bacwardzgarage11 ай бұрын
The car currently has a 6inch fiberglass cowl with steel framing inside. Hopefully you find the one you are looking for! 🍻
@jasoncoequyt413111 ай бұрын
Is it for sale ?
@bacwardzgarage11 ай бұрын
Fortunately for me, Never for sale 🍻🛞
@stevenfan121811 ай бұрын
You'll tare that tire up ...novas rearends are offset more on the right..right side will rub..
@bacwardzgarage11 ай бұрын
Haven’t had any rubbing concerns so far but we are keeping a close eye on it!
@user-um5cj5di4z11 ай бұрын
You Guys Inspire Me ....Still Have My First Car 70 Nova ... Now that Life has gotten in the Way At 52 I need to Get Her back on the Road My has been sitting for 25 Yrs ....
@bacwardzgarage11 ай бұрын
You can do anything you put your mind to! Make it happen cap’n🙌
@musclekingmedia Жыл бұрын
Gotta learn the carb with the big cam! Couple pumps, and when she start rev her up a bit to 2-2500 after a few she’ll idle!
@bacwardzgarage11 ай бұрын
She can be a little cold blooded sometimes but eventually it gets moving!
@musclekingmedia11 ай бұрын
@@bacwardzgarage same as my motor.
@musclekingmedia Жыл бұрын
Gotta learn the carb with the big cam! Couple pumps, and when she start rev her up a bit to 2-2500 after a few she’ll idle!
@musclekingmedia Жыл бұрын
Good stuff my man! Have a 69 and heads up, those arms being cheap, best to change the ball joints to moog.. there are some horror stories of the cheap stuff braking.
@bacwardzgarage11 ай бұрын
Not a bad idea! Appreciate the idea and thanks for sharing
@sergiodeodato3150 Жыл бұрын
Que vídeo legal parabéns
@MikeWolf-427 Жыл бұрын
Looks good. What size are those wheels?
@bacwardzgarage Жыл бұрын
Appreciate it! Front and rear wheels are 15x8 4.5in bs. Link for them is in the description as well!🍻🍻
@Kato1559 Жыл бұрын
Keep it up.. getting some vice grip garage vibes lol but over all keep up the inspiration.. cant wait to start my channel for my 72 nova
@bacwardzgarage Жыл бұрын
Thank you for the support, we are big fans of Vice Grip Garage and glad we can inspire as well! Hope to see your channel up soon! 🍻
@Conner438 Жыл бұрын
Love the nova. Reminds me of my 72. You got an Instagram?
@bacwardzgarage Жыл бұрын
Hey thank you for the support! Our Instagram is BacwardzGarage as well as our tiktok. 🍻
@jdub929 Жыл бұрын
Need to lower front end a bit. Otherwise looking good
@bacwardzgarage Жыл бұрын
Thank you!
@USMC_BABE38 Жыл бұрын
badass nova nice well done!
@bacwardzgarage Жыл бұрын
Thank you for the support much appreciated!
@pontiac411 Жыл бұрын
Yes the flaps seal the shroud at low driving speeds and open up to allow more air to pass through the radiator at higher driving speeds
@bacwardzgarage Жыл бұрын
You and one other commented explaining this. I was pretty close with my “educated guess” thank you for sharing the information much appreciated!
@BBBILLY86 Жыл бұрын
30A fuse for the fan. The rubber flaps force air to be drawn across the whole face of the radiator by the fan from behind. But if cruising at highway speeds the pressure of frontal air is high so flaps open to allow frontal air to push thu radiator.
@bacwardzgarage Жыл бұрын
I was pretty close as far as my guess, we appreciate the information!
@kevinvansandt9117 Жыл бұрын
Fremont car show next weekend you should join us
@CanarysHotRodGarage Жыл бұрын
If your timing is spot on try running a lower thermostat it’ll help lowering your temp. Try a 170.
@user-pl6dw6wq7q Жыл бұрын
Thing sounds good, should make it louder 😂 Keep posting the classic car stuff, it’s great seeing young guys making them great again!
@bacwardzgarage Жыл бұрын
Appreciate that, we will have more with classics soon as well so stay tuned! Much love 🍺
@reaper10mm17 Жыл бұрын
I'm in the process of building a 74 with my daughter. Keep the information coming.👍
@bacwardzgarage Жыл бұрын
We certainly will! We hope the information was helpful🙌
@RWildekrav66 Жыл бұрын
Nice rims ! But I’m an old Cragar chrome 5 spoke mag wheel fan Nice car
@CanarysHotRodGarage Жыл бұрын
You have a nice one to be fixing up. And you got it going in the right direction. Can’t wait to see what you do to it next!👍
@chrisaraiza2868 Жыл бұрын
Z’s suck ass. Easy to gap🥸
@PaulRhodes420 Жыл бұрын
This Nova is Bad Ass! Love the wheels, they made her look so much meaner!! I just found y'all and I had to Sub this channel, I wanna see her on the strip!! I watch a lot of car videos, have you heard of SRC, Billy the kid, & Old Man's Garage? You can learn a lot from them, a little bit of a lot of everything! Good luck guys! See ya next video!! Needs a Turbo!! 😁or 2!
@bacwardzgarage Жыл бұрын
Thank you for the support Paul! The wheels make a world of difference! Once we get some of the body stuff taken care of we would love to take this down the drag strip. Turbo’s hopefully down the line too! We look forward to seeing more of your comments👍
@PaulRhodes420 Жыл бұрын
@@bacwardzgarage Right on! I'm looking forward to watching this Nova get faster & faster! She's already mean, let her dig her claws in that pavement and tear that track up!! ✌😎💨
@paulpowell195 Жыл бұрын
Nice job love it
@markharper6183 Жыл бұрын
All you had to do was count the threads on your old ones and copy it over to the new one.
@bacwardzgarage Жыл бұрын
We plan on doing a proper alignment so lining them up on the ground and then adjusting on the car as close as possible will work for the time being!
@MS-yp2uy Жыл бұрын
Ohh you contributed to the C.C.P. Chinese communist party on buying them wheels, what happened to being more USA....😢
@bacwardzgarage Жыл бұрын
We were having a hard time finding wheels to run this brake kit so these wheels were what worked the best!
@brotherskrillrc6042 Жыл бұрын
Really 8 think you need the bracket it keeps the line from flexing and you stop quicker instead of a loose line that moves and dosent ad that extra force to STOP!😂😂😂
@bacwardzgarage Жыл бұрын
A brake line will flex slightly when pressing the brake pedal but it should not move excessively. With this particular line, it’s so short that there isn’t much movement. Worse case, we use our ziptie certification!
@brotherskrillrc6042 Жыл бұрын
You found it the tallest air filter ever yes😂😂😂😂😂
@bacwardzgarage Жыл бұрын
Gotta let her breathe!
@brotherskrillrc6042 Жыл бұрын
I know I know, I put a 2 1/2 inch low profile filter on my 69 camaro 396 SS and it studders and stalled not enough air went back to 4 inch filter barely could close the hood still works like a champ was just saying it was yr all hope no feelings where hurt 🤣🤣🤣🤣🤣
@LifewithMario44 Жыл бұрын
Nice build man your car sounds and looks good🤟🏾
@bacwardzgarage Жыл бұрын
Thank you Mario! More is coming so stay tuned!!
@aaroncaplinger4407 Жыл бұрын
Don’t dis Eminem he gon come after you and put you in a album
@bacwardzgarage Жыл бұрын
Not meant to be a diss, we love Slim Shady👍
@yolocuhh2706 Жыл бұрын
Badass 🙌
@bacwardzgarage Жыл бұрын
It definitely pulls! Stay tuned for more to come👍
@lordbluebaron2270 Жыл бұрын
American cars please. None of this jap or kraut shit
@onegodapostolic2149 Жыл бұрын
Are you sure about that?
@bacwardzgarage Жыл бұрын
According to all the 350z forums, all they do is blow up🤷🏻♂️
@timothynelson239 Жыл бұрын
Love it Bailey!
@bacwardzgarage Жыл бұрын
Thank you Tim!
@kevinvansandt9117 Жыл бұрын
Nice job guys
@bacwardzgarage Жыл бұрын
Thank you for the support Kevin!
@kevinvansandt9117 Жыл бұрын
Where you located I'll come get the old parts
@bacwardzgarage Жыл бұрын
We are hanging onto the old parts for now
@kevinvansandt9117 Жыл бұрын
Great car I have a 71 nova it is my dream car anxious to see what you do with yours so I'll subscribe
@bacwardzgarage Жыл бұрын
We appreciate you subscribing! This Nova is will more than likely be on this channel as long as it’s still running and driving.
@WolfParadisePlus Жыл бұрын
Yo how'd you do the dash suede that's freaking awesome I gotta do mine
@bacwardzgarage Жыл бұрын
I didn’t do anything with the dash, that is just how the car came…wish I could be more help!
@ablejohnson Жыл бұрын
Put a Boss 351C in it!
@bacwardzgarage Жыл бұрын
We are hoping to do an LS with some sort of forced induction down the line since it’s a chevy. But that is a good idea for another future build we have planned!
@musclekingmedia Жыл бұрын
😂
@tonywest8140 Жыл бұрын
Cool Nova. Great story on the engine. Keep up the good work. Keep the videos coming. Oh, get you a Nova hoodie, lol .
@bacwardzgarage Жыл бұрын
Thank you! Glad you are enjoying the videos. Plenty more to come!
@jasoncoequyt4131 Жыл бұрын
That engine was built for a Camaro originally.
@bigsracingchannel Жыл бұрын
Great video guys! What do you think of a carbon hood to match your black wing? Would look really cool with the black and red contrast! Maybe even do a wrap for the hood
@bacwardzgarage Жыл бұрын
That’s not a bad idea! With the wing and hyperblack wheels it could bring that contrast and look super nice. Appreciate the idea!
Пікірлер
What’s the tire size? Front and rear? Does the front tires rub? Ghx
When moving the flaps allow the air to blow through. It will allow the engine to stay cool at idle and driving down the road.
Good job.... need to see more on your Nova. I have done ton's of work to mine on my channel also !!!!
Excellent job. I put QA1 coil overs and a sway bar in my Nova and did it ever improve the handling.......Just finished the rear set up.
This is pretty much the exact situation with my chevelle, replaced the suspension all the way around and front disk conversion. I was on the fence about an ls swap and decided that i'm just going to build up the 350
Not sure if i catched it but what size rear tires and back spacing?
Your car sound like it needs timing. But that sputter could be few things. Check your plugs and if timing is good, play with the PV and squirters.
Appreciate it man! Just added 91 into the tank that day and was mixing so I will be adjusting timing soon when it’s only 91/93 in it 🍻
Front tires 15x7 or 15x8?
Front Wheels are 15x8. Same as the rears just different tire sizes. 🍻🛞
@@bacwardzgarage what size tire on the front?
Where did you get your hood and is that a 4 or 6 inch cowl? Im trying to find a 4 inch steel cowl hood with no mesh holes in the top i like having it all open
The car currently has a 6inch fiberglass cowl with steel framing inside. Hopefully you find the one you are looking for! 🍻
Is it for sale ?
Fortunately for me, Never for sale 🍻🛞
You'll tare that tire up ...novas rearends are offset more on the right..right side will rub..
Haven’t had any rubbing concerns so far but we are keeping a close eye on it!
You Guys Inspire Me ....Still Have My First Car 70 Nova ... Now that Life has gotten in the Way At 52 I need to Get Her back on the Road My has been sitting for 25 Yrs ....
You can do anything you put your mind to! Make it happen cap’n🙌
Gotta learn the carb with the big cam! Couple pumps, and when she start rev her up a bit to 2-2500 after a few she’ll idle!
She can be a little cold blooded sometimes but eventually it gets moving!
@@bacwardzgarage same as my motor.
Gotta learn the carb with the big cam! Couple pumps, and when she start rev her up a bit to 2-2500 after a few she’ll idle!
Good stuff my man! Have a 69 and heads up, those arms being cheap, best to change the ball joints to moog.. there are some horror stories of the cheap stuff braking.
Not a bad idea! Appreciate the idea and thanks for sharing
Que vídeo legal parabéns
Looks good. What size are those wheels?
Appreciate it! Front and rear wheels are 15x8 4.5in bs. Link for them is in the description as well!🍻🍻
Keep it up.. getting some vice grip garage vibes lol but over all keep up the inspiration.. cant wait to start my channel for my 72 nova
Thank you for the support, we are big fans of Vice Grip Garage and glad we can inspire as well! Hope to see your channel up soon! 🍻
Love the nova. Reminds me of my 72. You got an Instagram?
Hey thank you for the support! Our Instagram is BacwardzGarage as well as our tiktok. 🍻
Need to lower front end a bit. Otherwise looking good
Thank you!
badass nova nice well done!
Thank you for the support much appreciated!
Yes the flaps seal the shroud at low driving speeds and open up to allow more air to pass through the radiator at higher driving speeds
You and one other commented explaining this. I was pretty close with my “educated guess” thank you for sharing the information much appreciated!
30A fuse for the fan. The rubber flaps force air to be drawn across the whole face of the radiator by the fan from behind. But if cruising at highway speeds the pressure of frontal air is high so flaps open to allow frontal air to push thu radiator.
I was pretty close as far as my guess, we appreciate the information!
Fremont car show next weekend you should join us
If your timing is spot on try running a lower thermostat it’ll help lowering your temp. Try a 170.
Thing sounds good, should make it louder 😂 Keep posting the classic car stuff, it’s great seeing young guys making them great again!
Appreciate that, we will have more with classics soon as well so stay tuned! Much love 🍺
I'm in the process of building a 74 with my daughter. Keep the information coming.👍
We certainly will! We hope the information was helpful🙌
Nice rims ! But I’m an old Cragar chrome 5 spoke mag wheel fan Nice car
You have a nice one to be fixing up. And you got it going in the right direction. Can’t wait to see what you do to it next!👍
Z’s suck ass. Easy to gap🥸
This Nova is Bad Ass! Love the wheels, they made her look so much meaner!! I just found y'all and I had to Sub this channel, I wanna see her on the strip!! I watch a lot of car videos, have you heard of SRC, Billy the kid, & Old Man's Garage? You can learn a lot from them, a little bit of a lot of everything! Good luck guys! See ya next video!! Needs a Turbo!! 😁or 2!
Thank you for the support Paul! The wheels make a world of difference! Once we get some of the body stuff taken care of we would love to take this down the drag strip. Turbo’s hopefully down the line too! We look forward to seeing more of your comments👍
@@bacwardzgarage Right on! I'm looking forward to watching this Nova get faster & faster! She's already mean, let her dig her claws in that pavement and tear that track up!! ✌😎💨
Nice job love it
All you had to do was count the threads on your old ones and copy it over to the new one.
We plan on doing a proper alignment so lining them up on the ground and then adjusting on the car as close as possible will work for the time being!
Ohh you contributed to the C.C.P. Chinese communist party on buying them wheels, what happened to being more USA....😢
We were having a hard time finding wheels to run this brake kit so these wheels were what worked the best!
Really 8 think you need the bracket it keeps the line from flexing and you stop quicker instead of a loose line that moves and dosent ad that extra force to STOP!😂😂😂
A brake line will flex slightly when pressing the brake pedal but it should not move excessively. With this particular line, it’s so short that there isn’t much movement. Worse case, we use our ziptie certification!
You found it the tallest air filter ever yes😂😂😂😂😂
Gotta let her breathe!
I know I know, I put a 2 1/2 inch low profile filter on my 69 camaro 396 SS and it studders and stalled not enough air went back to 4 inch filter barely could close the hood still works like a champ was just saying it was yr all hope no feelings where hurt 🤣🤣🤣🤣🤣
Nice build man your car sounds and looks good🤟🏾
Thank you Mario! More is coming so stay tuned!!
Don’t dis Eminem he gon come after you and put you in a album
Not meant to be a diss, we love Slim Shady👍
Badass 🙌
It definitely pulls! Stay tuned for more to come👍
American cars please. None of this jap or kraut shit
Are you sure about that?
According to all the 350z forums, all they do is blow up🤷🏻♂️
Love it Bailey!
Thank you Tim!
Nice job guys
Thank you for the support Kevin!
Where you located I'll come get the old parts
We are hanging onto the old parts for now
Great car I have a 71 nova it is my dream car anxious to see what you do with yours so I'll subscribe
We appreciate you subscribing! This Nova is will more than likely be on this channel as long as it’s still running and driving.
Yo how'd you do the dash suede that's freaking awesome I gotta do mine
I didn’t do anything with the dash, that is just how the car came…wish I could be more help!
Put a Boss 351C in it!
We are hoping to do an LS with some sort of forced induction down the line since it’s a chevy. But that is a good idea for another future build we have planned!
😂
Cool Nova. Great story on the engine. Keep up the good work. Keep the videos coming. Oh, get you a Nova hoodie, lol .
Thank you! Glad you are enjoying the videos. Plenty more to come!
That engine was built for a Camaro originally.
Great video guys! What do you think of a carbon hood to match your black wing? Would look really cool with the black and red contrast! Maybe even do a wrap for the hood
That’s not a bad idea! With the wing and hyperblack wheels it could bring that contrast and look super nice. Appreciate the idea!