Пікірлер

• 
  @jaggass10 күн бұрын

  Rob looks better with no wig.

• 
  @hemantonarzary507615 күн бұрын

  😮 ok

• 
  @MrThairacer29 күн бұрын

  fantastic and great homage to the legendary GM 😅 , hope see him one day fingers crossed 🤞

• 
  @angor17463 ай бұрын

  in this system, the valve is removed by turning it counterclockwise, without unscrewing the nut or anything else. Another one is placed in the same way

• 
  @Bleeuu20004 ай бұрын

  You amazing person!! Fixed my day was literally about to throw it. Thank you

• 
  @ianellis4 ай бұрын

  Aw thank you

• 
  @rosemarypurvis48244 ай бұрын

  Hi mines is a newer machine and has another bit here so how do i sort it thanks

• 
  @berry_ave1234 ай бұрын

  Went to see him last night absolutely brilliant my second time 😊

• 
  @user-dm8wf9kn7h4 ай бұрын

  Великолепно ,Талантище,люблю,восхищаюсь

• 
  @user-no9yc8wr8g4 ай бұрын

  Saw Saturday colchester fantastic

• 
  @NR-rv8rz6 ай бұрын

  The bulbs do go quickly. I bought a two pack for around £40 so quite cheap. Two of the three bulbs went in one and one of the three went in the other. I took one apart to remove the single working bar but despite being the same basic model in the video with just different branding, the bulbts are fixed in to the housing and wired up in a way that the wires can't be un-jacked and if I put gentle pressure to pull the bulb out, it just cracks the glass. It was worth a try and fun taking it to pieces. But probably just better buy another one or a set as they are currently going for £38.95 for two. The reason I like them is that as it gets dark by 4pm in the UK winter, the bulbs are not a dull orange as shown in the pictures but an almost white yellow. So the heat radiating from them soaking into the body and the bright light feels a bit like hot sunlight and cheers me up.

• 
  @stylistxxx6 ай бұрын

  My first bulb gone in 1 week ));

• 
  @user-uv1wj5vi6b7 ай бұрын

  Always,,

• 
  @user-nd5jc8xv8v7 ай бұрын

  they cant even say what size of bulb for these or where to get them. dont buy their crap simple

• 
  @user-nd5jc8xv8v7 ай бұрын

  its brainless idiots that sell these. it doesnt enter their tiny brains that people need to know sizes of bulbs but they make it impossible to find out.

• 
  @iant94618 ай бұрын

  It should be criminal that it isn’t easier to change these bulbs. Most people will just throw them out and buy a new one. What a waste of plastic and materials. Manufacturers should be held accountable.

• 
  @cooltechno3608 ай бұрын

  For the size of wall plug, those holes were drilled excessively long, I'd use masking tape on the drill bit to avoid going too deep in future. And a centre punch is great for getting the drill bit started in the right place, it avoids having to screw in at an angle. Otherwise, the video is really well edited so props for that and pleasant to watch. 👍👍

• 
  @hakunchristiansen974511 ай бұрын

  No satellite signal. Sky+HD and Sky Q Sky Q use a type of LNB called Wideband and Sky+HD use LNB called universal LNB. Universal can be used by almost all ku band satellite. Wideband LNB reads more data from the satellite

• 
  @hakunchristiansen974511 ай бұрын

  It is a lot easier to lose signal with mesh satellite dish. Get solid satellite dish, and you will not have to align the dish for over 15 years again.

• 
  @stewarthaddon3219 Жыл бұрын

  Top little video that Ian, cheers pal.

• 
  @DominicOrtiz-lv1ri Жыл бұрын

  "promosm" ✌️

• 
  @keithjones7156 Жыл бұрын

  Well done getting a signal.

• 
  @speedyboishan87 Жыл бұрын

  Was it easy to do can it bd done in under 10 mins😊

• 
  @bhight100 Жыл бұрын

  That unit looks the same as mine, I'm trying to find a replacement heating element in the middle of that unit, would you be able to help me with any info you have on it?

• 
  @ianellis Жыл бұрын

  Yes I got the parts from Mspa Web site, they list all parts fir any model. I repaired it during lockdown a few years ago, but have now sold the hot tub. Mspa were helpful at the time. Hope this helps

• 
  @juliemclaren8982 Жыл бұрын

  Ahhh I bought a heater not a jigsaw puzzle !! Can't remove the connectors & now the heater looks fit for the bin!!. Probably end up blowing myself up!!

• 
  @ianellis Жыл бұрын

  To be honest, I think they are cheaper to buy new than changing the bulbs in them.

• 
  @juliemclaren8982 Жыл бұрын

  @@ianellis honestly what an absolute carry on!! My daughter cut her self at her attempt and now got my cousin having ago! Why send replacement bulbs with the unit of you got to basically pull it apart to "attempt " to replace the flaming bulbs! Absolute madness 🥶🤬

• 
  @allanwatson2359 Жыл бұрын

  Where can I buy replacement halogen tubes?

• 
  @ianellis Жыл бұрын

  Amazon sell them

• 
  @EnglishSaxons Жыл бұрын

  Dont buy them these imo are garbage, I got 2 and they just go fast 1,2,3each bulb blew I've 2 of these things over 3 months all bulbs are out

• 
  @pa_maj.MARTINI-van-MAN Жыл бұрын

  You would almost think that they want you not to replace the bulbs but buy a new heater. Some of these halogen heaters have removable side covers for easy bulb replacement. Since these bulbs are consumables, they should be easy and quickly (1 to 2 minute job) to replace. Cheers for the demonstration.

• 
  @bigcat2679 Жыл бұрын

  I need help! I inflated my tub filled it with water and the bubbles won’t work but I can hear a click when I press the button. So I let the air out and drained it and now it won’t inflate but I have no codes and all the buttons light up. Is this a air or a valve issue? It’s weird now it won’t inflate either.

• 
  @ianellis Жыл бұрын

  It may simply be that your tub's inflation valve or deflation valve adapter is faulty, or that it's too loose. A loose inflation valve is likely to be a key cause of air escaping through a Lay-Z-Spa.

• 
  @ianellis Жыл бұрын

  Skip to content  Lay Z Spa Deflating But No Puncture: 5 Steps To Follow July 29, 2022 Some links on this page may lead to us receiving a small commission at no additional charge to you. Read More One of the biggest problems inflatable spa owners may face is a deflating inflatable hot tub. Unfortunately, as a fully inflatable system, there may come a time when you find that your spa springs a leak. The best tubs and spas should hold up for years to come. However, even owners of Lay-Z-Spa tubs, considered some of the best in the world, may struggle with deflating issues every now and again. What should you do - and what should you check for if your Lay-Z-Spa starts deflating? We have a full guide on how to fix any kind of deflating tub - but right here and now, let’s take a look at Lay-Z-Spa deflating problems, and what you need to keep in mind. Related: Lay Z Spa Has a Leaking Pump  1) Have You Got A Puncture? This is normally the first thing you should think of when there is a spa deflation. A puncture could occur for any reason. Why Lay-Z-Spa tubs are generally very robust and durable, they are still susceptible to sharp points and objects likely to tear. You should be very careful to check the full lining once completely deflated. Punctures can be hard to spot if they are only slight. 2) Inspect While In Use Another thing you can do to head a deflating tub off at the pass is to carefully inspect it while in use. Check the outside of your tub, including the bottom surface and cover when inflated, for noises - such as air escaping from the pump or inflation hose, for example. If not on the outside of your tub, try to listen carefully for air leaks on the inside - just don’t fill it up with water! Here is a guide to inflating a spa with water in it. 3) Checking The Inflation Valve Thankfully, there’s an easy solution to many Lay-Z-Spa deflation problems. It doesn’t always have to be a puncture that’s causing air to shoot out of your tub. It may simply be that your tub’s inflation valve or deflation valve adapter is faulty, or that it’s too loose. A loose inflation valve is likely to be a key cause of air escaping through a Lay-Z-Spa. Once again, it can be uncommon for problems like this to arise in the most robust of tubs. However, it’s easy to fix. Make sure that your inflation valve is secure, tight, and fully in place. Otherwise, you’re going to leak air in spades. 4) Check Your Warranty Lay z spa deflation can be an issue and there seem to be a few claims on the web that Lay-Z-Spa tubs have warranties which won’t protect you against punctures. In our collective opinion, it’s worth checking these details if your tub deflates. We assume puncturing a jacuzzi is classed as accidental damage. Therefore, you may actually be able to claim and order the necessary products or part as a replacement for it through wear and tear on your contents insurance. Please note, as we’re not insurance carriers, this might vary - look carefully at your options. Good inflatable hot tubs have a warranty and will protect you if any deflating issues or usage problems arise and they’re of no fault of your own. You should always check the warranty details and inclusions before you buy. It’s worth knowing what you can claim for. 5) Don’t Replace Outright It’s tempting to just fix a hot tub, even a lazy spa, by just buying a whole new one. Is this really the best thing to do if you have a puncture or a loose-fitting? At upwards of £400-£500 for Lay-Z-Spa’s more affordable systems, you’re going to be wasting an awful lot of money. Therefore, make sure to check out an inflatable hot tub repair kit to see if you can fix it and to tighten up your inflation valves. Check out our full guide, for example, and never be ready to throw in the towel until you’ve given your tub the full once-over. Trust us on this! More Hot Tub Advice It’s important you find out what type of maintenance a UK hot tub needs before purchasing. Looking after a spa takes time and money, so we would advise doing your research before buying one. We have a number of useful guides, from cleaning to installation to get you started. Sources support.bestwayaftersales.co.uk/faq/help-with-your-lay-z-spa-inflatable-liner/ Share this post Share on facebook Share on twitter Share on pinterest Share on linkedin Share on tumblr  John Devlin Hello, Welcome to my website. I’m John, and I created the InflatableHotTubGuide while researching these spas nearly a decade ago. Since its creation, the site has become the leading UK resource for many models. As a passionate hot tub user, I love to test and explore all the latest machines this industry keeps creating. I hope you find our content helpful.  Amazon Associates Disclaimer As an Amazon Associate, I earn from qualifying purchases. Inflatable Hot Tub Guide. Portable spa news, opinions and breakdowns of all products relating to these hot tubs. We do not provide medical advice or treatments from using these spas. If unsure, please refer to the manufacturer. Learn Hot Tubs Accessories Installation Maintenance Important Pages About Us Contact Privacy © 2022 InflatableHotTubGuide. All Rights Reserved This website uses cookies to ensure you get the best experience on our website. GOT IT

• 
  @lesleymcgillick3039 Жыл бұрын

  Great video it’s going to make it so much easier to build thanks

• 
  @ianellis Жыл бұрын

  Aw thank you very much for your lovely comment.

• 
  @ferencszabo2931 Жыл бұрын

  Thank you for the guide, in my case, not just the pod piercer was blocked, but once I removed it there was another injector I had to unblock behind the pod piercer. Your video was quite helpful in removing the pod piercer, thank you Ian!

• 
  @ianellis Жыл бұрын

  Thank you very much for your comment , glad the video work out . Ian

• 
  @paulacardwell8367 Жыл бұрын

  On off button lights up but all zeros on box. So god knows what's up.any ideas anybody reading this? So can't even inflate it.do I throw it away and buy new???

• 
  @ianellis Жыл бұрын

  Try contacting Mspa , think their number is 0353 1800 851 353.

• 
  @paulacardwell8367 Жыл бұрын

  Well used for few years.aint used for few years .stored it safely in dry place and won't inflate. Not happy as cost quite alot.

• 
  @alexjaybrady2 жыл бұрын

  thanks!

• 
  @mutleyeng2 жыл бұрын

  it didnt look like any of what you sensed was electric cable - it should rapidly flash with live cables. You could just have been picking up screws or nails in the studs

• 
  @ianellis2 жыл бұрын

  I didn't know that, best being careful that's all. H & S lol

• 
  @TheBiosanity20 күн бұрын

  It's a concrete wall so I think that's unlikely.

• 
  @certifiedballer84372 жыл бұрын

  Had Same error E1, changed the temperature sensor, works great 👍🏼

• 
  @George-iy8dd2 жыл бұрын

  How did you manage to get that metal top bar on AFTER you screwed the back on? It looks longer.

• 
  @ianellis2 жыл бұрын

  If I remembered, I pushed the metal bar in on one side then having to unscrew the other side to pull out to get metal bar in. Hope this helps.

• 
  @parrotyee2 жыл бұрын

  Thank you so much, foreign parents always need a hand.

• 
  @paulchristy78042 жыл бұрын

  Hi Ian, I have the same Spa as you have demonstrated on, can you tell me the the make etc of the heat sensor please. Many thanks Paul C.

• 
  @ianellis2 жыл бұрын

  Hi Paul, temperature sensor i bought was from Mspa.com Sku number B9300983 mspaservice.co.uk/mspa-parts.html hope this is ok for you. Ian

• 
  @jamespaternoster69182 жыл бұрын

  Hi Iv got the same pump unit as you I’m not getting any error codes the heater light is on but the temperature just stays on 11 degrees any ideas if it’s them temperature sensor or the heating element

• 
  @ianellis2 жыл бұрын

  It sounds like your temperature sensor. That controls your water temperature. They aren't expensive. You can order them at mspa.com

• 
  @derekelford49242 жыл бұрын

  That’s a very easy valve change,a lot of cistern s now ,you can’t see the underneath of the cistern & have to dismantle the cistern ,& take it off the wall,to change the float valve,& takes 3times longer to change the float valve😡😡

• 
  @tonyfields95532 жыл бұрын

  hi got the same Beldray unit you don't recall size and type of tube required? TIA

• 
  @ianellis2 жыл бұрын

  Hi there, they are Halogen 400w tubes (230v ) on amazon for £7:99 , and suitable for most makes of Halogen heaters.

• 
  @ianellis2 жыл бұрын

  Hope this helps out.

• 
  @ianellis2 жыл бұрын

  215mm fire bar element bulb lamp 400w.

• 
  @tonyfields95532 жыл бұрын

  Than you

• 
  @betinalrke34692 жыл бұрын

  What do I do when I have done yhis and it still doesnt poor Water?

• 
  @ianellis2 жыл бұрын

  Perhaps your pump has broken. Then it's time to replace it unfortunately. Ian

• 
  @atonewithnature_ Жыл бұрын

  Try the actual pin. Mine wasn’t working and the pin that breaks the pod was blocked. I soaked in hot water and then blew through the small hole once the part was out. Worked immediately after and I’d tried everything

• 
  @garymoore87022 жыл бұрын

  I had this issue and i replaced the water pump and now works prefect

• 
  @SARFIELD1002 жыл бұрын

  Legend thanks mate!

• 
  @lynndoyle95442 жыл бұрын

  Where do you buy the replacement. Tried Screwfix and Plumb base. No good, don’t sell them anymore. Help.

• 
  @ianellis2 жыл бұрын

  Have you tried amazon, look for ballcock assembly. Or Ebay, try your local wilkos. Hope this helps. Ian

• 
  @ianellis2 жыл бұрын

  Think I used my local plumb centre

• 
  @lynndoyle95442 жыл бұрын

  Thanks Ian, found the very same one on Amazon. Job done.

• 
  @ozyboy15232 жыл бұрын

  Hi I have the mspa lite silver . Filter pump seems to be coming on and off every 10 mins or so all of a sudden. No error messages. Is this a sign the pump could be on its way out? At same time heating element light is on but nit drawing any current.

• 
  @ianellis2 жыл бұрын

  It does sound like your pump is on its way out, so this will need replacing, before you even touch the heating element, try and get a new temperature sensor first, and if this works its a lot cheaper than a new heater.

• 
  @shaygandhi25802 жыл бұрын

  Great video I where did you buy the kit from.

• 
  @barbarasevenoaks68213 жыл бұрын

  Hi, I can't undo the first big plastic nut! It's been there 40 years and doesn't want to move. My adjustable spanner is too small.

• 
  @ianellis3 жыл бұрын

  Have you tried a large adjustable wrench. You can get a cheap pair from wilkos. Hope this helps.

• 
  @brendaowen063 жыл бұрын

  Love your dog demo was really easy to follow

• 
  @ianellis3 жыл бұрын

  Thank you

• 
  @nanita-vs9lh3 жыл бұрын

  Por favor dónde puedo conseguir la bomba de filtro

• 
  @manuelsauri38313 жыл бұрын

  Ian, where you bay the new filter pump !?

• 
  @ianellis3 жыл бұрын

  Hello Manuel I bought the filter pump from Mspa online they sell everything you need for a Mspa hot tub. Thanks

• 
  @ianellis2 жыл бұрын

  MSpa online .