Printing this right now on Ender v3 se, scaled it up to 150 so we shall see how. Turns out
@tylerphom4 ай бұрын
I ve subscribed😮😮😮😮😮😮
@rackmasterh4 ай бұрын
Great idea for the drone shot.
@scottbrandt38144 ай бұрын
i printed this with a Ender 3 V3 SE and everything but the Steering wheel turend out great i can not get the steering wheel to print
@terryhenderson39594 ай бұрын
what is the purpose of the skin? to reflect some heat away during daytime shooting? no info on these anywhere
@isaiahsdad4 ай бұрын
Yes, to reflect the heat from the sun while doing solar photography.
@terryhenderson39594 ай бұрын
@@isaiahsdad Did you cut a sheet filter to get yours or where did you get them that fit the s50? Thanks
@hugovinicius20684 ай бұрын
I printed mine on 0.1 and DAMN those fittings were tight hahahaha But it worked. Just a lot of force and sore/red thumbs needed to fit everything together! Thanks for the tutorial, mate! <3
@Jeffgold234544 ай бұрын
Skins are Available at Michaels Store
@terryhenderson39594 ай бұрын
Michaels who? The art store?
@vivim1385 ай бұрын
Wyze cams keep getting disconnecting , this app is no good
@ct8106 ай бұрын
Doing this tomorrow! Thanks!!
@cliffwiebe2076 ай бұрын
Please, where did you get the skins? Has anyone found out?
@NGC0086 ай бұрын
Nice video and thanks for sharing Don. Where did you get the skins?
@TC-bq5ri6 ай бұрын
e hey! I didn't know you had a youtube channel
@monzillamusic6 ай бұрын
Hi where do you buy the skins? Cheers great vid😊
@ticoq1796 ай бұрын
hi, doesn't fall after is dring?
@MotoInsanity9 ай бұрын
Hi man, may I use this video in my next episode? Credited of course (watermark and link to your channel).
@isaiahsdad9 ай бұрын
Absolutely, please feel free to use it.
@MotoInsanity9 ай бұрын
Thanks a lot!@@isaiahsdad
@therealbikerz9 ай бұрын
Hey man. All good to use it? Full credits will be given to you, of course, thank you so much!
@isaiahsdad9 ай бұрын
Of course, please feel free.
@MotoMaxi9 ай бұрын
How are you!? May I share this video for my youtube project? Thanks in advance!
@isaiahsdad9 ай бұрын
Absolutely, please feel free.
@Motorcycle-Moments9 ай бұрын
Hello! Can I feature this video for a youtube edit that I'm working on? Thanks in advance.
@isaiahsdad9 ай бұрын
Absolutely, please feel free.
@moto-stars10 ай бұрын
Thanks!
@driveinstructordrivingscho823310 ай бұрын
Hi Don Price, hello, can I use this video on my channel? Any comment about what or where did this happen? Thanks and stay safe.
@isaiahsdad9 ай бұрын
Please do!
@dirtbikelunatic10 ай бұрын
Hello! Thanks for submitting it :)
@RRBDDrivingSchool10 ай бұрын
Hi Don Price, can I use this video "Near miss!" in my compilation of dashcam clips?with credit (name on screen).Any comment?update?
@isaiahsdad10 ай бұрын
Absolutely. Feel free.
@RRBDDrivingSchool10 ай бұрын
thank you@@isaiahsdad
@holliesmith714310 ай бұрын
Lyles Performance and Lenny Neal’s paint job are top notch. Beautiful machine! ❤️
@johndoe7109 Жыл бұрын
So heres a question. I have a second home in another country with wyze cams but im not there at the time, is the setup the same? Or do i have to be physically there to portforward or do that kind of stuff?
@JerryFallwell-bt3py Жыл бұрын
hey don is okcdrone club still up online what happened?
@dosdont Жыл бұрын
It worked, thanks, hopefully it's just as easy with the V3's also
@Eat_More_Possum Жыл бұрын
Good quality video. Draper?
@SloDwn1135 Жыл бұрын
In doing the math, I’m thinking he hit you at somewhere around 90+/- when you popped into sight, but you’re lucky he wasn’t up the road a mile because you were going faster between the 18 and 54 second mark. That dude that passed you must have really been booking. It’s too bad he wasn’t the target. He had to have been pacing you at minimum, or catching you when you were targeted. Another few seconds past that spot might have made for a different story.
@GrayRaceCat Жыл бұрын
"No fancy editing, no frills," no volume. I've turned it up as far as it will go and still cannot hear you.
@shaneleach3834 Жыл бұрын
The AMS is not a filament dryer.
@isaiahsdad Жыл бұрын
I updated the description to reflect that. Thanks.
@morbus5726 Жыл бұрын
true, it isn't an active filament dryer, but it will keep filament relatively dry for a longer amount of time because of the dessicant.
@MichaelThompson77 Жыл бұрын
Thanks for doing this video almost all the videos I have watched don’t go into and details about features or anything just show unboxing and printing.
@RicardoHernandez-ih1fp Жыл бұрын
Congrats!! I got mine on Monday, and I love it!!!
@Eat_More_Possum Жыл бұрын
Nice machine. Thanks for the tour, Don.
@SuperYoko1977 Жыл бұрын
Thank you!
@bernadettethomas4725 Жыл бұрын
Excellent, you explained this so well. I thank you so much
@heybear33 Жыл бұрын
Hey would we be able to feature this in our next reaction video if we credit your channel on the screen? thanks (Biker Girls React)
@isaiahsdad Жыл бұрын
Absolutely, be my guest!
@onHaze72 жыл бұрын
Hello! Can i use your video to my future compilation? Of course, full credits and watermark given
@isaiahsdad2 жыл бұрын
Of course, go right ahead!
@onHaze7 Жыл бұрын
@@isaiahsdad Thanks man <3
@bikelunatic35962 жыл бұрын
Hey, can i use this video in my new compilation? I will credit you with watermark ofc Thx in advance
@isaiahsdad2 жыл бұрын
You sure can. Go right ahead.
@bikelunatic3596 Жыл бұрын
@@isaiahsdad thank you sir
@Valrog_RC_3D2 жыл бұрын
Thanks very much! It works great!
@LifeOnMotorcycle2 жыл бұрын
Hey mate, can i use this video in my new compilation? credit in the description, comment & your channel name in compilation
@isaiahsdad2 жыл бұрын
Absolutely, go right ahead.
@LifeOnMotorcycle2 жыл бұрын
@@isaiahsdad thanks alot mate :) I really appreciate it!
@MotoEducation2 жыл бұрын
Hey man, good to feature it? Full credits will be given to you, of course, thank you!
@isaiahsdad2 жыл бұрын
Absolutely! Go right ahead.
@MotoEducation2 жыл бұрын
Hey man, I've used it. Feel free to check it out and thank you! THAT BIKE IS GONE! | BIKE, MOTORCYCLE CRASHES & CLOSE CALLS 2022 [Ep.#69]
@hellfirebikerz2 жыл бұрын
Hey brother, mind if I use it in my compilation :)? Fully credited of course~ and the dog is adorable !
@isaiahsdad2 жыл бұрын
Go right ahead!!
@moto-stars2 жыл бұрын
Thanks a lot bro!
@dirtbikelunatic2 жыл бұрын
Hello! Thanks for submitting it :)
@BlessTheFuture2 жыл бұрын
Are looking for the key! The key that will open the door, to liiiiiiiife! Silly lost drivers.
Пікірлер
No GPS reception issues with metallic vinyl?
Printing this right now on Ender v3 se, scaled it up to 150 so we shall see how. Turns out
I ve subscribed😮😮😮😮😮😮
Great idea for the drone shot.
i printed this with a Ender 3 V3 SE and everything but the Steering wheel turend out great i can not get the steering wheel to print
what is the purpose of the skin? to reflect some heat away during daytime shooting? no info on these anywhere
Yes, to reflect the heat from the sun while doing solar photography.
@@isaiahsdad Did you cut a sheet filter to get yours or where did you get them that fit the s50? Thanks
I printed mine on 0.1 and DAMN those fittings were tight hahahaha But it worked. Just a lot of force and sore/red thumbs needed to fit everything together! Thanks for the tutorial, mate! <3
Skins are Available at Michaels Store
Michaels who? The art store?
Wyze cams keep getting disconnecting , this app is no good
Doing this tomorrow! Thanks!!
Please, where did you get the skins? Has anyone found out?
Nice video and thanks for sharing Don. Where did you get the skins?
e hey! I didn't know you had a youtube channel
Hi where do you buy the skins? Cheers great vid😊
hi, doesn't fall after is dring?
Hi man, may I use this video in my next episode? Credited of course (watermark and link to your channel).
Absolutely, please feel free to use it.
Thanks a lot!@@isaiahsdad
Hey man. All good to use it? Full credits will be given to you, of course, thank you so much!
Of course, please feel free.
How are you!? May I share this video for my youtube project? Thanks in advance!
Absolutely, please feel free.
Hello! Can I feature this video for a youtube edit that I'm working on? Thanks in advance.
Absolutely, please feel free.
Thanks!
Hi Don Price, hello, can I use this video on my channel? Any comment about what or where did this happen? Thanks and stay safe.
Please do!
Hello! Thanks for submitting it :)
Hi Don Price, can I use this video "Near miss!" in my compilation of dashcam clips?with credit (name on screen).Any comment?update?
Absolutely. Feel free.
thank you@@isaiahsdad
Lyles Performance and Lenny Neal’s paint job are top notch. Beautiful machine! ❤️
So heres a question. I have a second home in another country with wyze cams but im not there at the time, is the setup the same? Or do i have to be physically there to portforward or do that kind of stuff?
hey don is okcdrone club still up online what happened?
It worked, thanks, hopefully it's just as easy with the V3's also
Good quality video. Draper?
In doing the math, I’m thinking he hit you at somewhere around 90+/- when you popped into sight, but you’re lucky he wasn’t up the road a mile because you were going faster between the 18 and 54 second mark. That dude that passed you must have really been booking. It’s too bad he wasn’t the target. He had to have been pacing you at minimum, or catching you when you were targeted. Another few seconds past that spot might have made for a different story.
"No fancy editing, no frills," no volume. I've turned it up as far as it will go and still cannot hear you.
The AMS is not a filament dryer.
I updated the description to reflect that. Thanks.
true, it isn't an active filament dryer, but it will keep filament relatively dry for a longer amount of time because of the dessicant.
Thanks for doing this video almost all the videos I have watched don’t go into and details about features or anything just show unboxing and printing.
Congrats!! I got mine on Monday, and I love it!!!
Nice machine. Thanks for the tour, Don.
Thank you!
Excellent, you explained this so well. I thank you so much
Hey would we be able to feature this in our next reaction video if we credit your channel on the screen? thanks (Biker Girls React)
Absolutely, be my guest!
Hello! Can i use your video to my future compilation? Of course, full credits and watermark given
Of course, go right ahead!
@@isaiahsdad Thanks man <3
Hey, can i use this video in my new compilation? I will credit you with watermark ofc Thx in advance
You sure can. Go right ahead.
@@isaiahsdad thank you sir
Thanks very much! It works great!
Hey mate, can i use this video in my new compilation? credit in the description, comment & your channel name in compilation
Absolutely, go right ahead.
@@isaiahsdad thanks alot mate :) I really appreciate it!
Hey man, good to feature it? Full credits will be given to you, of course, thank you!
Absolutely! Go right ahead.
Hey man, I've used it. Feel free to check it out and thank you! THAT BIKE IS GONE! | BIKE, MOTORCYCLE CRASHES & CLOSE CALLS 2022 [Ep.#69]
Hey brother, mind if I use it in my compilation :)? Fully credited of course~ and the dog is adorable !
Go right ahead!!
Thanks a lot bro!
Hello! Thanks for submitting it :)
Are looking for the key! The key that will open the door, to liiiiiiiife! Silly lost drivers.
Yup!
Get it Poncho!!!🤪
1561
208
405