Пікірлер

• 
  @yardboy395521 сағат бұрын

  Tried the reset method with the key, blinking light went away for a little time then came back again. It’s some other problem like the Infiniti service guy said on the phone.

• 
  @Akanematcha2 күн бұрын

  If these go bad can you get the code P2A00??? Please let me know cause the code keeps coming back and after clearing it runs fine but later it comes back after an 1hr

• 
  @Breetati2 күн бұрын

  Saved me 🎉

• 
  @xdvblack79474 күн бұрын

  What's the brand of passport radar you use? Awesome video, I'm taking notes.

• 
  @RetroidFuture4 күн бұрын

  Lmao this made my idle worse 😂😂😂💀💀💀 kill me

• 
  @josu3_vq355 күн бұрын

  Help me out my 04 g35 6mt has been overheating I’ve already done the coolant flush bleeding, changed the temp sensor, thermostat I don’t know what else to do😢

• 
  @sandwichinthebuilding87765 күн бұрын

  Song in 0:27 plz 😢

• 
  @g35s7 күн бұрын

  I cleaned the throttle body on my 06 G35x (107k miles). After doing so, I noticed that the rpm was a bit higher than usual on decel and idle. The car would propel itself and maintain speed on its own if you caught the rpm at the right time around 1300. After doing this the idle immediately went back to normal and the car decels normal. Thanks as always, your vids are easy to follow, informative and entertaining. Been watching for 4+ years :)

• 
  @jesselirias14037 күн бұрын

  What if I already used my finger to move the butterfly?💀 what do I do, I did it to clean it up

• 
  @Kaijuvq9 күн бұрын

  2 days n 2 nights later 😂😂 but those tail lights are flawless 😍

• 
  @lordzed839 күн бұрын

  Need to check my fuse think i blown it cause my z standing with disconected battery since driven once a week. And now after i drive it and stop start up code comes on car drives

• 
  @doncosner261110 күн бұрын

  Thank you so much!

• 
  @jonathanrosales360710 күн бұрын

  Hello I had the same problem I changed my ipdm box as well my car started for like 30 minutes and then it died on me again like yours did but I checked all my coil packs and they were good my fuses arnt being blown tho would that mean I have a bad ecu ? Since it’s not getting any power

• 
  @Suex003 күн бұрын

  Any fixes yet?

• 
  @jonathanrosales36073 күн бұрын

  @@Suex00 I ended up checking the fuses again and it turned out the fuse was blown it started up but the car is starting to turn off sometimes when I’m js at a complete stop. I’m pretty sure it’s the ignition coils I did forget to check 2 of them maybe one of them was bad 😅 I will be changing them tomorrow

• 
  @Suex002 күн бұрын

  @jonathanrosales3607 hope it's just that. Keep me updated. I'm having the same issues too. Gonna change out the IPDM here in a bit to see if it works.

• 
  @jonathanrosales36072 күн бұрын

  @@Suex00 I changed all the coils and I seem to still have the same problem sometimes my g just starts to idle very low as if it’s about to turn off I just spent 340 on the coil packs 🥲

• 
  @Suex002 күн бұрын

  @jonathanrosales3607 yours could be an ECU problem. I changed out my IPDM. I'm getting a no crank no start situation.

• 
  @jvparts-zc6pj10 күн бұрын

  Greetings from Brazil! I did the procedure on my 2010 fx35 awd and worked great! Thank you so much for the video!

• 
  @guachito3311 күн бұрын

  seems to work but they don’t have anything in stock , everything has to be special order and they don’t have anything for my new car. so useless

• 
  @pierresmith817512 күн бұрын

  just got my car dynoed, ended up making 235wtorque and 245whp , running 550cc injectors 75mm trottle, 340lph40psi fuel pump and 3’ z1 single exit exhaust past the y-pipe with no cats, shi ion know how isn touch at least 275

• 
  @legendarypestcontrol972212 күн бұрын

  lol torque converter was in the transmission not the motor in booklet

• 
  @MrLaloman1815 күн бұрын

  These are freaking amazing because there is another company that makes their own anti-theft wheel locks that are custom made and designed to be impossible to break and have your wheels stolen and they guaranteed it buying you new rims if they do but they tested them with real thieves using all available tools these pro lowlifes use and they FAILED big time! You will get 2 special removal keys in which one will be send to the dealer of your choice (don't know why the fugg this needs to be) and the other key you keep! The downfall is that these cost a freaking $400+ and this was a few years ago... Compare to these bad boys that I never knew existed for $150 or less for a Toyota corolla makes these a freakin' bargain and worth every penny! ps... They DON'T make them for BMWs!

• 
  @joefreezyttv171815 күн бұрын

  LOVE how well you documented everything, awesome! Thanks for great video!

• 
  @monsesgarza495516 күн бұрын

  Anyone find the part number for a 03 auto ?

• 
  @FraxinusExelsior18 күн бұрын

  The correct tool makes all the difference.

• 
  @tonymccoy76121 күн бұрын

  My car amp keeps flickering red light and green light on the amp

• 
  @TheTruelakersfan23 күн бұрын

  How to easily remove these lol @6:15 kzread.info/dash/bejne/hmxomKlskrGtl9Y.htmlsi=VcjCXwq9fQ8KM2Oz

• 
  @vqcommunity24 күн бұрын

  Why dose it say push in clutch when he’s not pushing the clutch in ???

• 
  @thomasharris515125 күн бұрын

  Where’s the new videos?! Nice channel!!!👌🏾💎♦️🔥 buying a G35 for my kid and using your video as the buyers guide.

• 
  @callydvincy26 күн бұрын

  Tried so many versions of the reset on a V33 engine and bone worked

• 
  @thuycheriefrederick142326 күн бұрын

  My husband has been working on this same car & its still not working. Any advice?

• 
  @AyoDave60227 күн бұрын

  I am following your steps but when i hold down the pedal, the check engine doesnt blink??

• 
  @juanplus332428 күн бұрын

  Old but gold. Thank you for this detailed how to! Me saving a lot at the same time putting premium parts!

• 
  @aaronrimmington1569Ай бұрын

  For anyone looking on here works on an import z11 03. Well it actually gets the eml to blink 😂

• 
  @seanramdhanie3235Ай бұрын

  i love you

• 
  @ogonbio8145Ай бұрын

  I hate to say it but I got a 2002 Nissan pathfinder from the original owner, bought it at 119,000 KILOMETRES. It burns about a quart of oil every thousand kilometres. I do not rev my engine, when I am accelerating onto the highway I allow the vehicle to go through its gears without going above 3,000 rpm’s. It seems like these engines just burn oil. Vq35de

• 
  @theanimeotaku2794Ай бұрын

  It doesn't need to be specific, just 5W-30 or 10W-30 mobile one from Walmart

• 
  @angmccarty4621Ай бұрын

  Wiring does look like that stock

• 
  @angmccarty4621Ай бұрын

  I dealt with the same exact I mean exactly the same thing and sad u weren't around then 😢😢😢

• 
  @zeperf88Ай бұрын

  Tried to replace the hard line with a braided one, but stripped the top fitting even with the special brake line wrench. Bleeding was a pain. Tried a bunch of different methods and could never get more than a little bit of pressure. I gave up and took the car off the stands. I started pumping the pedal with my foot and after a few minutes had good pressure. After a few days I had perfect pressure. So idk what advice to give me except pump the shit out of it.

• 
  @alrightymmkay_Ай бұрын

  You swerving at people is super uncool dude and a weak man can’t control his anger.

• 
  @angelisaliveАй бұрын

  I fucken love this guy 🤣🤣😂😂

• 
  @stopher1971Ай бұрын

  I truly do not understand how people mix up the coil pack plugs mine absolutely will not reach any other coil pack, then designated pack and it’s even formed in that position, I mean, I couldn’t even stretch it to another coil pack, but whatever ‘06 coupe

• 
  @edricstegall2088Ай бұрын

  Thanks Bro🤝

• 
  @preloven8411Ай бұрын

  How do you avoid codes with a exhaust

• 
  @TimeAttack9Ай бұрын

  Thank you, brother. Followed your instructions and worked perfectly.

• 
  @los7948Ай бұрын

  Did you use racing Sparks?

• 
  @letsgetcookin566Ай бұрын

  Wow man, this really helped a lot. I recently finished fixing up my 2006 g35 coupe and realized that it the idle was being very weird. It jumped from 600 rpm’s to 1000 back down to 600, and made the car annoying at times. I found this video without realizing I had to relearn the idle, since I did remove the throttle body to replace valve covers. This video helped a lot and I just finished the relearn.

• 
  @sixpestАй бұрын

  Texas plate says it all.

• 
  @dazeboy79Ай бұрын

  I love the Infiniti.. Thanks for sharing!

• 
  @ryanschultz1658Ай бұрын

  No drain plug crush gasket, I went to my local Infiniti and they sell them .50 / piece. Good vid though thanks.

• 
  @GurillaRonАй бұрын

  Ya they were doing the same shit to mine

• 
  @michael2652Ай бұрын

  5 years later and your vid is still helping people. thanks got my g to finally stop overheating i think… great vid