Have one of those 450 and had lots bugs when I bought it new but now I have got most of then worked out
@mattnolan51823 күн бұрын
Why make a video if you don’t know how to do it. How are we supposed to learn anything from this video.
@M1996R.Ай бұрын
Hello, which tractor is it, does it have enough power, is it difficult to work?
@andylonsdorf1294Ай бұрын
On 2020 john deere with loader 35hp plentiful power.
@jeffd.8917Ай бұрын
Good training. Thanks
@sylvan47070Ай бұрын
invest in a chain sharpener.
@andylonsdorf1294Ай бұрын
Why?
@epmcdonald45623 ай бұрын
This video is horse shit... doesnt have a clue 😂.. thats why not showing anything .. just trying get views! Smfh.
@andybortel85494 ай бұрын
We used to crimp after we mowed it with our new Holland 479 and ted!
@James-xk8dy6 ай бұрын
This video would be great if only we could see what the fuck he was talking about. Next time maybe he can look at the screen so he knows when he’s pointing his camera at fucking nothing talking about a green switch
@epmcdonald45623 ай бұрын
😂😂
@justinbieber123737 ай бұрын
Not a Bearing.. its a U JOINT.. PUT THE DAMN FITTING ON. That fitting has a ball valve so grese doesn't come out.. That U JOINT IS SUPER STRENGTH , By not putting the fitting in the middle it makes the Ujoint harder. They also make a sealed UJOINT without any fitting at all. Also you have to use a needle nose adapter to put grease in that fitting .. 👍
@alexrobinson228111 ай бұрын
Ours went last night , rattling like hell , instantly thought lots of money , had a good look and saw like filings, watched your video first and set to dismantling it thanks to your help , parts ordered , time for a beer , cheers
@djmorgan8783 Жыл бұрын
Do you think you could check that screen without draining all the fluid
@andylonsdorf12945 ай бұрын
I have heard people putting a vacuum on a hydraulic fluid chamber to do filter change, but I don't think it works on the screen.
@chandlermills6658 Жыл бұрын
Could I ask you a question about the alert stern the bale is full?
@andylonsdorf1294 Жыл бұрын
Sure
@jhowell78 Жыл бұрын
How do you prime the pump I replaced the ump and put hydro fluid in in reservoir. I have nothing happening in the system
@andylonsdorf1294 Жыл бұрын
Put fluid in tank above the pump by radiator.
@user-md4rt2ss8l Жыл бұрын
How did you get the hex bolt plug out. Mine just spins around
@johnnyholland8765 Жыл бұрын
It is a stainless steel mesh material that is rolled up inside the canister. If you look closely the bottom grid piece is held in place by some small spot welds around the outer rim. Carefully drill these out and remove it. You can then remove the mesh material. Unroll it and clean it. Also clean the canister. I used a power washer with detergent. Let everything dry then re roll it and insert it back in the canister. Insert and re weld the bottom piece and your done. Mine wasn't quite as bad as yours but had never been cleaned. You can also find a dry filter type from a later model tractor and convert. Good luck...
@Adam-wk4lj Жыл бұрын
Hey guys, if you rotate your steering wheel until the top part is facing left, you can semi get the screw driver in there at a good enough angle to get that bottom screw
@venanciocarrilloarredondo104 Жыл бұрын
Good see you from México
@matthughson1110 Жыл бұрын
Could be able density. If I run on my smaller ho (85hp) Kubota I can't make heavy density bales. As it takes too much power from the tractor to turn the bale whole wrapping and continue to turn bale while opening. But on a larger hp 110hp I can make them as tight as I want. That's adjustable via the lever on left side front that is green yellow red red being tightest. I also had to adjust the cable that runs because from the factory it was set too tight. It actually made too big of a bale and put enough pressure on the locks it wouldn't even unlock the door.
@farmrrick Жыл бұрын
Next will probably be you changing your hydraulic pump . That metal came from somewhere .
@BJSmith-ll3uw Жыл бұрын
It can be brake material also.
@lifeonthefarm60016 ай бұрын
Could be brake pads, of the clutch pads since it’s a power shift. I’ve had this happen on a 4450 quad range and a 4640 power shift.
@peles73 Жыл бұрын
Sir, please make a little bit better videos than this in the future. Thank you :)
@Dansk55 Жыл бұрын
I think quality OEM equivalent sealed are best. Serviceable ones MUST be greased no more than 3k miles and the seals aren't as good as sealed.
@jimforsyth2. Жыл бұрын
Did you have to ajust the adjuster bolt or did it.come pre adjusted
@andylonsdorf1294 Жыл бұрын
I did put another tractor on baler. It opened up just fine. The baler can bale wet hay and short hay just as good as the more expensive balers. Never did figure out the twine tying that is junk design. Wrap works excellent. 500 bales this year no other problems. I did get the 1135 Massey Ferguson checked out for hydraulic pressure. 1400psi. Had front pump rebuilt. Now at 2200psi. Working much better.
@wahoonate Жыл бұрын
Were you having hydraulic issues or why did you need or want to pull the screen?
@forrestblackwood6587 Жыл бұрын
Did you figure out the problem with the baler and do you like the baler
@andylonsdorf1294 Жыл бұрын
I did on the opening part. My tractor was only putting out 1400psi on rear hydraulic scv. Had front pump rebuilt now at 2200psi.
@citizen16752 жыл бұрын
Thank you
@DevObama4402 жыл бұрын
Did you remove the steering wheel? If not how’d you get that torx bolt near the shaft out
@thomasmiller12862 жыл бұрын
i take mine off with out unbolting all that other stuff
@JoseMedina-lm6fg2 жыл бұрын
Lube Narrow needle dispenser
@ronaldschultz11892 жыл бұрын
That’s just what I have been looking for my 1975 c65.
@scottrayhons25372 жыл бұрын
Thank you Andy! Never knew about that screen. Put in new lower shaft seals and new oil w/filter this past fall on 4320. 4020 also. These old tractors will run forever if taken care of. The new eqt. is junk to start with.
@Homeflav2 жыл бұрын
So you didn't have to remove the Steering wheel?
@sblack482 жыл бұрын
Thank you!
@mousetoad70402 жыл бұрын
I put moog joints in my front axle shafts, but the clips were the wrong size, too big in diameter. Fortunately I had two more for another job and I rob Lowe’s, but I contacted Moog and had gotten no response, I think I’ll stick to Spicer
@ghettohillbilly12 жыл бұрын
i have to do this on my 410, is rebuilding an otion or should i just buy new?
@andylonsdorf12942 жыл бұрын
Just buy new.
@andylonsdorf12942 жыл бұрын
Or rebuilt one they probably want your old one.
@brendahobbs27922 жыл бұрын
Were is this screen on a 5310 series
@andylonsdorf12942 жыл бұрын
I would go to jd parts website see if you can find your tractor. Search for screens see what comes up.
@kevinbrown71302 жыл бұрын
if your hydraulic fluid gets water in it, the fluid can develop an algea problem and coat the screen with a gelatinous goo that can starve your pump and you may loose some or all of your lift and even steering problems may develop. Run your fluid through a few times plug it and pull the plug 3 or 4 times to flush algea or particules out then put a fresh filter on and run it with a mower on it to get it warm and flush the system and another new filter and new fluid. i regained all smooth lifting on 3 point and super smooth steering .
@nancychapman86653 жыл бұрын
Where can i get screens for a snowco cleaner
@andylonsdorf12943 жыл бұрын
I would watch for auctions. Or make them.
@storminnormanz3 жыл бұрын
I have the same problem, I can't find a puller that will fit to save my life lol
@andylonsdorf12943 жыл бұрын
What do you need a puller for?
@storminnormanz3 жыл бұрын
@@andylonsdorf1294 those bearings and carriers you used a slide hammer on, I ended up getting them a few minutes ago with some homemade tools haha. I'm going ahead and replacing 4 bearings and 2 carriers that were worn. I lifted that thing out by hand boy that was a heavy mother im not doing that again
@andylonsdorf12943 жыл бұрын
@@storminnormanz O yah. I used forks on skid steer to lift that out. A long rod with slight bend would work also.
@robertman933 жыл бұрын
Okay so I have a 2011 Mini I've replaced the main seal 3 times it's still leaking,do ya have any ideas on why it's still leaking,if so please share Thank ya
@BigBoom922 жыл бұрын
Try using some good quality gasket sealer. Their might be a slight uneven part of the surface allowing oil to get out under pressure.
@ronaldcarson23623 жыл бұрын
Km
@pighiyo3 жыл бұрын
Hello. How far apart do the elephant ears have to be from the vanes?
@sergioe.j.r64033 жыл бұрын
Me puedes mandar un video de la rotación de los platós por fabor de esta maquina
@chrischristopher593 жыл бұрын
What type of bulbs does it take
@joshbenck37223 жыл бұрын
Hi I just wondering what part number is
@peterroberts34533 жыл бұрын
Just today had ours done at MINI Main Dealers.£570.. Luckily had a mini backed warranty. Also window mechanism replaced. total cost £931.00 Even though it’s a Mini it’s not cheap to repair.
@cryipticcreep55863 жыл бұрын
Thanks
@melindacash12683 жыл бұрын
What are you making?
@jesserousseau24813 жыл бұрын
So what valve was bad 1 or both 1 an 3
@andylonsdorf12943 жыл бұрын
I believe both. There not very expensive to just replace or rebuild them. But a good annual cleaning would keep it running when you need it. Normally it quits when its colder then normal. O and get the newer solenoid for up and down. That's the one near your battery with big wire on it. My plow guy in my area reconmend it.
@DylanJoyceFarms3 жыл бұрын
How do you like the yield monitor since you have run it?
@andylonsdorf12943 жыл бұрын
Its good very basic. The only thing I don't like is the chain link switch attached to header. So on the headland you lift up the header the switch goes off and when put header down it pull on switch with a spring to on. Well if you have head up to high for some reason it shut off the yield readings. So this year I just wired it to a lighted switch when on, in the cab. I turn it on when I'm harvesting and off when I'm not. Much better just have remember to turn on and off. Very easy to install, I see they updated some hardware on the newer system. I dont need all stuff. I take the hardware out of combine in winter put in house keep out of the cold and moisture. Out the 10 months I'm not using it.
@DylanJoyceFarms3 жыл бұрын
@@andylonsdorf1294 thanks for the reply. We are looking at the newer elite system that they have now. We are wanting to do more with variable rate and build out management zones. We have an old ag leader pf3000 but it is starting to get unreliable. Does it stay pretty accurate and calibrated?
Пікірлер
Have one of those 450 and had lots bugs when I bought it new but now I have got most of then worked out
Why make a video if you don’t know how to do it. How are we supposed to learn anything from this video.
Hello, which tractor is it, does it have enough power, is it difficult to work?
On 2020 john deere with loader 35hp plentiful power.
Good training. Thanks
invest in a chain sharpener.
Why?
This video is horse shit... doesnt have a clue 😂.. thats why not showing anything .. just trying get views! Smfh.
We used to crimp after we mowed it with our new Holland 479 and ted!
This video would be great if only we could see what the fuck he was talking about. Next time maybe he can look at the screen so he knows when he’s pointing his camera at fucking nothing talking about a green switch
😂😂
Not a Bearing.. its a U JOINT.. PUT THE DAMN FITTING ON. That fitting has a ball valve so grese doesn't come out.. That U JOINT IS SUPER STRENGTH , By not putting the fitting in the middle it makes the Ujoint harder. They also make a sealed UJOINT without any fitting at all. Also you have to use a needle nose adapter to put grease in that fitting .. 👍
Ours went last night , rattling like hell , instantly thought lots of money , had a good look and saw like filings, watched your video first and set to dismantling it thanks to your help , parts ordered , time for a beer , cheers
Do you think you could check that screen without draining all the fluid
I have heard people putting a vacuum on a hydraulic fluid chamber to do filter change, but I don't think it works on the screen.
Could I ask you a question about the alert stern the bale is full?
Sure
How do you prime the pump I replaced the ump and put hydro fluid in in reservoir. I have nothing happening in the system
Put fluid in tank above the pump by radiator.
How did you get the hex bolt plug out. Mine just spins around
It is a stainless steel mesh material that is rolled up inside the canister. If you look closely the bottom grid piece is held in place by some small spot welds around the outer rim. Carefully drill these out and remove it. You can then remove the mesh material. Unroll it and clean it. Also clean the canister. I used a power washer with detergent. Let everything dry then re roll it and insert it back in the canister. Insert and re weld the bottom piece and your done. Mine wasn't quite as bad as yours but had never been cleaned. You can also find a dry filter type from a later model tractor and convert. Good luck...
Hey guys, if you rotate your steering wheel until the top part is facing left, you can semi get the screw driver in there at a good enough angle to get that bottom screw
Good see you from México
Could be able density. If I run on my smaller ho (85hp) Kubota I can't make heavy density bales. As it takes too much power from the tractor to turn the bale whole wrapping and continue to turn bale while opening. But on a larger hp 110hp I can make them as tight as I want. That's adjustable via the lever on left side front that is green yellow red red being tightest. I also had to adjust the cable that runs because from the factory it was set too tight. It actually made too big of a bale and put enough pressure on the locks it wouldn't even unlock the door.
Next will probably be you changing your hydraulic pump . That metal came from somewhere .
It can be brake material also.
Could be brake pads, of the clutch pads since it’s a power shift. I’ve had this happen on a 4450 quad range and a 4640 power shift.
Sir, please make a little bit better videos than this in the future. Thank you :)
I think quality OEM equivalent sealed are best. Serviceable ones MUST be greased no more than 3k miles and the seals aren't as good as sealed.
Did you have to ajust the adjuster bolt or did it.come pre adjusted
I did put another tractor on baler. It opened up just fine. The baler can bale wet hay and short hay just as good as the more expensive balers. Never did figure out the twine tying that is junk design. Wrap works excellent. 500 bales this year no other problems. I did get the 1135 Massey Ferguson checked out for hydraulic pressure. 1400psi. Had front pump rebuilt. Now at 2200psi. Working much better.
Were you having hydraulic issues or why did you need or want to pull the screen?
Did you figure out the problem with the baler and do you like the baler
I did on the opening part. My tractor was only putting out 1400psi on rear hydraulic scv. Had front pump rebuilt now at 2200psi.
Thank you
Did you remove the steering wheel? If not how’d you get that torx bolt near the shaft out
i take mine off with out unbolting all that other stuff
Lube Narrow needle dispenser
That’s just what I have been looking for my 1975 c65.
Thank you Andy! Never knew about that screen. Put in new lower shaft seals and new oil w/filter this past fall on 4320. 4020 also. These old tractors will run forever if taken care of. The new eqt. is junk to start with.
So you didn't have to remove the Steering wheel?
Thank you!
I put moog joints in my front axle shafts, but the clips were the wrong size, too big in diameter. Fortunately I had two more for another job and I rob Lowe’s, but I contacted Moog and had gotten no response, I think I’ll stick to Spicer
i have to do this on my 410, is rebuilding an otion or should i just buy new?
Just buy new.
Or rebuilt one they probably want your old one.
Were is this screen on a 5310 series
I would go to jd parts website see if you can find your tractor. Search for screens see what comes up.
if your hydraulic fluid gets water in it, the fluid can develop an algea problem and coat the screen with a gelatinous goo that can starve your pump and you may loose some or all of your lift and even steering problems may develop. Run your fluid through a few times plug it and pull the plug 3 or 4 times to flush algea or particules out then put a fresh filter on and run it with a mower on it to get it warm and flush the system and another new filter and new fluid. i regained all smooth lifting on 3 point and super smooth steering .
Where can i get screens for a snowco cleaner
I would watch for auctions. Or make them.
I have the same problem, I can't find a puller that will fit to save my life lol
What do you need a puller for?
@@andylonsdorf1294 those bearings and carriers you used a slide hammer on, I ended up getting them a few minutes ago with some homemade tools haha. I'm going ahead and replacing 4 bearings and 2 carriers that were worn. I lifted that thing out by hand boy that was a heavy mother im not doing that again
@@storminnormanz O yah. I used forks on skid steer to lift that out. A long rod with slight bend would work also.
Okay so I have a 2011 Mini I've replaced the main seal 3 times it's still leaking,do ya have any ideas on why it's still leaking,if so please share Thank ya
Try using some good quality gasket sealer. Their might be a slight uneven part of the surface allowing oil to get out under pressure.
Km
Hello. How far apart do the elephant ears have to be from the vanes?
Me puedes mandar un video de la rotación de los platós por fabor de esta maquina
What type of bulbs does it take
Hi I just wondering what part number is
Just today had ours done at MINI Main Dealers.£570.. Luckily had a mini backed warranty. Also window mechanism replaced. total cost £931.00 Even though it’s a Mini it’s not cheap to repair.
Thanks
What are you making?
So what valve was bad 1 or both 1 an 3
I believe both. There not very expensive to just replace or rebuild them. But a good annual cleaning would keep it running when you need it. Normally it quits when its colder then normal. O and get the newer solenoid for up and down. That's the one near your battery with big wire on it. My plow guy in my area reconmend it.
How do you like the yield monitor since you have run it?
Its good very basic. The only thing I don't like is the chain link switch attached to header. So on the headland you lift up the header the switch goes off and when put header down it pull on switch with a spring to on. Well if you have head up to high for some reason it shut off the yield readings. So this year I just wired it to a lighted switch when on, in the cab. I turn it on when I'm harvesting and off when I'm not. Much better just have remember to turn on and off. Very easy to install, I see they updated some hardware on the newer system. I dont need all stuff. I take the hardware out of combine in winter put in house keep out of the cold and moisture. Out the 10 months I'm not using it.
@@andylonsdorf1294 thanks for the reply. We are looking at the newer elite system that they have now. We are wanting to do more with variable rate and build out management zones. We have an old ag leader pf3000 but it is starting to get unreliable. Does it stay pretty accurate and calibrated?