im not sure but cant you go into bios and change boot order to "ubuntu" or something?
@dochall4308Күн бұрын
This video should have way more views. 100 videos and this was the only one to show the magnet test
@BrigiNorthКүн бұрын
Thank you, i didnt knew here is screw.. now sucessfully replaced 👌
@kazeemkhan8250Күн бұрын
Omg thanks for the video ,saved me alot of money bro 👍👍👍
@MahdiHuseinКүн бұрын
What are you doing??
@Lucy_story_time2 күн бұрын
Hi mate heating element looks the same, but i get ratting noise out of it even when not used. Whats that switch name and is it possible to replace the switch alone?
@cfh42019693 күн бұрын
Thanks! only vid I found with this type of thermostat. Probably would've figured it out when I took it apart but now I know for sure.
@JBspeedandfab3 күн бұрын
Hi there, I have 10ohms between the copper lid and the positive terminal? It’s not a dead short but the rdc it tripping so I’m thinking my tank has a short to ground through the lid some how?
@cagmito76Күн бұрын
yes 10 ohms is a massive fail it should be Mohms minimum
@Gianni54 күн бұрын
cool
@raiyanchoudhury60654 күн бұрын
What tool is that you are using ? Might buy one myself
@paulraper71335 күн бұрын
Worked first pull. Thank you
@THERETROROOM835 күн бұрын
This video is absolute pointless
@jamesobriant14175 күн бұрын
I have the whirlpool wfw94heaw0 and I can’t find the screw to turn it down
@rivciks50455 күн бұрын
Which adaptor are you using and where did you get it?
@ashakoshta79017 күн бұрын
Please tell me what's going wrong with machine
@ashakoshta79017 күн бұрын
Only spin function is working
@ashakoshta79017 күн бұрын
Only the spin function works properly and the timer works properly in spin
@ashakoshta79017 күн бұрын
My washing machine is continuously taking water with no reason and display not reducing the time
@marcboucher32639 күн бұрын
I am finding these light testing videos really annoying, the first two I watched only showed testing one end of the bulb, now this one doesn’t tell me what multimeter setting to use for the ballast leads.
@balalai.insetaa.do.corção14 күн бұрын
Can you help me? My E470 crashed while I used it and doesn't even react when I press power. It doesn't have removable battery and also doesn't have the little hole to do the battery reset :(
@TheOfficialDorianelevator15 күн бұрын
did that with all my breakers i got from a friends house 6 years ago, all working, you can do this on fuses too, thats how i discovered one fuse was blown lol.
@HermieTorrescalumnag16 күн бұрын
How much
@blazexiytb16 күн бұрын
How have you fixated it my fly wheel moves when I move that screw
@blazexiytb16 күн бұрын
Tutorial for crankshaft replacement please
@blazexiytb16 күн бұрын
Some video of this engine existing where someone replaces the crankshaft?
@bdrifatrahman679416 күн бұрын
Vai,,amar fridge er light a cover acha ata khulte partachi na
@igstagptryandharmawan500218 күн бұрын
Jenis ram DDR3 atau DDR3L om ?
@rafapalop971718 күн бұрын
Thank you for your video
@blazexiytb18 күн бұрын
I can’t make the top perfect inline do I need to move the chain more?
@subevo3519 күн бұрын
Good stuff
@putrajaya78putrajays1320 күн бұрын
Ai mamang ngomong naon uing te ngartiii
@casss991020 күн бұрын
Should an electric cooker have a plug ?
@gureets979821 күн бұрын
How to fix other than replace?
@gureets979821 күн бұрын
Have you discovered a common fault with it?
@zaczac302421 күн бұрын
This technique is known as “shotgunning” Works if you understand how components behave in circuit and have no info It can be time consuming I suggest a strong magnifying glass to try & spot damaged components
@kevinalbers108423 күн бұрын
Why not just explain what you're doing? I saw the bulb in the last 4 seconds. Where'd that come from? Can you test a 6 volt flasher with a 12 volt battery? Speak please.
@fredmercury131425 күн бұрын
Mine is an Aquatronic Ultra 4 and it's scolding hot. It switches on a "low pressure" warning light, then switches the heater off. It's fine on setting I, apart from it being "cold", but on setting II it's a liability. This morning I had the dial right the way over to maximum cold, and on setting II, and it tried to burn me alive. Is that the flow valve? I live in a high limescale area... I'm thinking something is clogged. Thanks!
@user-ev5vs5xs9n25 күн бұрын
❤
@Mistertony66628 күн бұрын
SIR I HAVE ELECTRIC SCOOTER MOTORCYCLE MARK SUNRA GRACE,IS IT POSSIBLE TO CHARGE ANOTHER BATTERY IS 220 V REQUEST POWER
@HeureuxBokotaBranham29 күн бұрын
Comment puis-je faire pour pour entrer et mettre la date.
@WesleyToddАй бұрын
Just did it again to another chrome book. It works every time! Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! It only takes seconds!
@SteadySteppinАй бұрын
Did you realize that nobody can see you?
@andrewsherwin2444Ай бұрын
Good video NOT whats the point of not showing people
@cagmito76Ай бұрын
somestimes they dont as planned i apologise.
@forest8467Ай бұрын
i like your lesson
@user-vj2wt7jh7jАй бұрын
I have a problem with several under-counter fluorescent lights that have been burnt out for a while. I bought a pack of 5 off eBay, and only 2 out of 5 worked. They appear fine, but 3 wouldn't light. I also bought a pack of 3 from Amazon. One I replaced, and it works fine. The second fixture was burnt out as well, but neither of the extra 2 works in the remaining fixture. Why so many apparently bad bulbs? None should have come on if a bad ballast but only 2 out of 5 replacement bulbs worked. I don't understand why such a high percentage of replacement bulbs off eBay- damaged in shipping? They are t5 16 and 20-inch bulbs.
@harrycarter9129Ай бұрын
Will changing the shower head for a bigger head make the temperature of the water uncontrollable, thanks
@alba3533Ай бұрын
What are the units the author pronounses during the measurement? 12 inch?
@alba3533Ай бұрын
What is the language that is spoken by the author of the video?
@JonathanGonzalez-cp8mpАй бұрын
I saw another video that says you can test dc V and ohms between pin 4 chas gnd and pin 6 or pin 14 CAN +/-. On DC V we should get 0v when CAN bus is asleep and OL. This will indicate a short to voltage or short to ground. Does anyone know if test is true or now?
Пікірлер
Oh my god you just saved my day
im not sure but cant you go into bios and change boot order to "ubuntu" or something?
This video should have way more views. 100 videos and this was the only one to show the magnet test
Thank you, i didnt knew here is screw.. now sucessfully replaced 👌
Omg thanks for the video ,saved me alot of money bro 👍👍👍
What are you doing??
Hi mate heating element looks the same, but i get ratting noise out of it even when not used. Whats that switch name and is it possible to replace the switch alone?
Thanks! only vid I found with this type of thermostat. Probably would've figured it out when I took it apart but now I know for sure.
Hi there, I have 10ohms between the copper lid and the positive terminal? It’s not a dead short but the rdc it tripping so I’m thinking my tank has a short to ground through the lid some how?
yes 10 ohms is a massive fail it should be Mohms minimum
cool
What tool is that you are using ? Might buy one myself
Worked first pull. Thank you
This video is absolute pointless
I have the whirlpool wfw94heaw0 and I can’t find the screw to turn it down
Which adaptor are you using and where did you get it?
Please tell me what's going wrong with machine
Only spin function is working
Only the spin function works properly and the timer works properly in spin
My washing machine is continuously taking water with no reason and display not reducing the time
I am finding these light testing videos really annoying, the first two I watched only showed testing one end of the bulb, now this one doesn’t tell me what multimeter setting to use for the ballast leads.
Can you help me? My E470 crashed while I used it and doesn't even react when I press power. It doesn't have removable battery and also doesn't have the little hole to do the battery reset :(
did that with all my breakers i got from a friends house 6 years ago, all working, you can do this on fuses too, thats how i discovered one fuse was blown lol.
How much
How have you fixated it my fly wheel moves when I move that screw
Tutorial for crankshaft replacement please
Some video of this engine existing where someone replaces the crankshaft?
Vai,,amar fridge er light a cover acha ata khulte partachi na
Jenis ram DDR3 atau DDR3L om ?
Thank you for your video
I can’t make the top perfect inline do I need to move the chain more?
Good stuff
Ai mamang ngomong naon uing te ngartiii
Should an electric cooker have a plug ?
How to fix other than replace?
Have you discovered a common fault with it?
This technique is known as “shotgunning” Works if you understand how components behave in circuit and have no info It can be time consuming I suggest a strong magnifying glass to try & spot damaged components
Why not just explain what you're doing? I saw the bulb in the last 4 seconds. Where'd that come from? Can you test a 6 volt flasher with a 12 volt battery? Speak please.
Mine is an Aquatronic Ultra 4 and it's scolding hot. It switches on a "low pressure" warning light, then switches the heater off. It's fine on setting I, apart from it being "cold", but on setting II it's a liability. This morning I had the dial right the way over to maximum cold, and on setting II, and it tried to burn me alive. Is that the flow valve? I live in a high limescale area... I'm thinking something is clogged. Thanks!
❤
SIR I HAVE ELECTRIC SCOOTER MOTORCYCLE MARK SUNRA GRACE,IS IT POSSIBLE TO CHARGE ANOTHER BATTERY IS 220 V REQUEST POWER
Comment puis-je faire pour pour entrer et mettre la date.
Just did it again to another chrome book. It works every time! Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! It only takes seconds!
Did you realize that nobody can see you?
Good video NOT whats the point of not showing people
somestimes they dont as planned i apologise.
i like your lesson
I have a problem with several under-counter fluorescent lights that have been burnt out for a while. I bought a pack of 5 off eBay, and only 2 out of 5 worked. They appear fine, but 3 wouldn't light. I also bought a pack of 3 from Amazon. One I replaced, and it works fine. The second fixture was burnt out as well, but neither of the extra 2 works in the remaining fixture. Why so many apparently bad bulbs? None should have come on if a bad ballast but only 2 out of 5 replacement bulbs worked. I don't understand why such a high percentage of replacement bulbs off eBay- damaged in shipping? They are t5 16 and 20-inch bulbs.
Will changing the shower head for a bigger head make the temperature of the water uncontrollable, thanks
What are the units the author pronounses during the measurement? 12 inch?
What is the language that is spoken by the author of the video?
I saw another video that says you can test dc V and ohms between pin 4 chas gnd and pin 6 or pin 14 CAN +/-. On DC V we should get 0v when CAN bus is asleep and OL. This will indicate a short to voltage or short to ground. Does anyone know if test is true or now?