Пікірлер

• 
  @peterg56982 күн бұрын

  Haha I got the same light! It looks insane. I got it shipped from China.

• 
  @aznwulf3 күн бұрын

  my fav 335 owner

• 
  @yessyy118 күн бұрын

  🔥🔥🔥

• 
  @peterg569823 күн бұрын

  Looks amazing boss

• 
  @srbuildz13 күн бұрын

  @@peterg5698 thank you appreciate the support 🙏

• 
  @illest.m324 күн бұрын

  Yessir!! Wheels look fire🔥🔥

• 
  @srbuildz13 күн бұрын

  @@illest.m3 appreciate you bro 🙏😎

• 
  @xiv_luna201824 күн бұрын

  Lci tail lights next! Also where did you get your headlights?

• 
  @srbuildz13 күн бұрын

  @@xiv_luna2018 yes sir lci tail lights are a must ! & i got them from dna motoring bro

• 
  @Auradentity25 күн бұрын

  That’s what’s up! 🎉

• 
  @srbuildz24 күн бұрын

  @@Auradentity appreciate the support 🙏

• 
  @marionnavarro673125 күн бұрын

  Did you use the clip from the stock intercooler ?

• 
  @srbuildz24 күн бұрын

  @@marionnavarro6731 yes i re used the stock intercooler clips for both sides

• 
  @naito_nateАй бұрын

  It looks verry good,i took mine apart and painted the interior gloss black and already had white night bulbs and bought race works halo dtm rings with carbon fiber eye lids and kept the oem yellow turn singnals

• 
  @srbuildz24 күн бұрын

  @@naito_nate oh nice i bet it looks badass bro!

• 
  @naito_nate24 күн бұрын

  @@srbuildz yeah man thanks, you need to take your time to paint them so the paint dry all good then when installing the dtm halo rings you need to tuck the wires properly and to make sure the halo's are straight both sides then you all good homie! To tell you the truth beleive it or not only problem i could think of was that my passenger fender liner is all broken from how low the car is in front... im searching for one right now!

• 
  @srbuildz13 күн бұрын

  @@naito_nate damm as much as i would want to do that it sounds like it takes some time to get it done hopefully in the future when i have free time i can give it a shot

• 
  @naito_nate3 күн бұрын

  @@srbuildz for sure bro! I wish i started my mecanic knowledge at a early age so i could be far with a a1 grade skills and pay...i started too late and where i was doin basic maintenance when covid hit it closed down so i went back to trucking! I try my best to do stuff my self as much possible but its hard when you don't own a garage i gotta jack the car and laydown on a safe place outdoor or rent a lift somewhere wich is alwase a rush ...anywho thanks for the videos it helps giving ideas man!👍

• 
  @rsaaronАй бұрын

  If anyone here is looking for a BOV, do not get the tial blow off valve. it's over hyped and quiet. go turbo smart or HSK

• 
  @srbuildzАй бұрын

  Yes the Tial BOV is more of a quiet toned noise where as the hks is more of a loud pitch noise it’s all personal preference but i do enjoy the hks one over the tial bov

• 
  @hollywoodty1939Ай бұрын

  Quick question what did you do for the vents did you cover them to stop the water ?

• 
  @srbuildzАй бұрын

  Honestly i left the vents like that when there was water i would just cover up the vents with some tape lol

• 
  @FBI-cv2igАй бұрын

  Snap ring is the bane of my existence been trying to get it in for a hour

• 
  @srbuildzАй бұрын

  Yeah it can be a real pain in the ass to get it on but once you do it won’t come out

• 
  @1SIK3352 ай бұрын

  Respectable! What boost and which turbos?

• 
  @thiseternity2 ай бұрын

  The build is coming along nicely so sick! 😎

• 
  @RedheadZ232 ай бұрын

  what year z is this ..... can i put the 2005 cruise switch only on my 2006 or do i need the controls that are for 06 and up ... the one with cruise and audio controls left and right?

• 
  @srbuildz2 ай бұрын

  Mine was a 07-08 cant remember but I’m sure you can add those controls they might work right away or you might have to have someone kinda activate them for you if i remember correctly

• 
  @RedheadZ232 ай бұрын

  @@srbuildz yeah you had a hr ok. but you were able to put just the steering wheel controls only the right side and got them acvtivated? im saying like i dont need the harness controls with the stereo controls on the lft

• 
  @srbuildz2 ай бұрын

  @@RedheadZ23 the controls have the harness and all Zs should have the harness already there so you can add them and the plugs should be there already to just plug in

• 
  @MrJasperiscoolable2 ай бұрын

  Where did you take that tunnel video bro?

• 
  @srbuildz2 ай бұрын

  It’s in LA i don’t remember exactly where bro

• 
  @geo335st2 ай бұрын

  How effective is this intercooler vs the vrsf race?

• 
  @srbuildz2 ай бұрын

  Honestly all intercoolers do the same thing it’s all really just personal preference i went with this one cause it was already black and i wanted it to blend in with the black accents of the bumper i never used a vrsf one but I’ve heard good things about them

• 
  @geo335st2 ай бұрын

  @@srbuildz gotcha. Yeah I've read that these are really efficient when cooling but the stock connections didn't work for my single setup. I love my vrsf race. It stays 15 degrees above ambient while cruising and close to 5-10 degrees while doing pulls. I like the design of the CSF since it's not a traditional bar and plate.

• 
  @rsaaron2 ай бұрын

  ​@@geo335sti have this intercooler. Even after installing 17t turbos, i have never gone into limp mode at 18psi. Although the bigger vrsf coolers have more cooling power, the csf cooler exceeds my needs. One of those needs is that the cooler is black

• 
  @geo335st2 ай бұрын

  @@rsaaron that's good. Yeah I went the biggest possible bc im running a pte6266 at 22psi.

• 
  @rsaaron2 ай бұрын

  nice vid. i run that same intercooler with 17ts

• 
  @srbuildz2 ай бұрын

  How are you liking it so far ?

• 
  @rsaaron2 ай бұрын

  No problems, No limp mode, no complaints👍

• 
  @illest.m32 ай бұрын

  Yessirrrrrrr🔥

• 
  @srbuildz2 ай бұрын

  Slowly but surely we will get there 😎

• 
  @peterg56982 ай бұрын

  Great stuff

• 
  @srbuildz2 ай бұрын

  Thank you appreciate the support 🙏

• 
  @CMbuildz2 ай бұрын

  🫡🫡🫡

• 
  @geo335st2 ай бұрын

  🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 sounds so good bro! Really happy for you!

• 
  @srbuildz2 ай бұрын

  Appreciate it bro thank you it sounds amazing 😎🙏

• 
  @taipeiblvd1233 ай бұрын

  Other than the mounter mount problem, did you had alignment issue because you said your crossmember was unbalanced, looks twisted. Right my my Z has an issue where the driverside wheels sticks out a good amount more thatn the passenger side. And 1 alignment shop said he can't adjust my passenger side to OE Spec. so i'm thinking if I have twisted crossmember as well. Great video, can't believe you did it all by yourself on the ground. hat off to you

• 
  @srbuildz3 ай бұрын

  My alignment was off a bit but the alignment shop i went to was able to adjust mine correctly thankfully. Thank you bro really appreciate it it was some what of a pain but it had to be done so i can add more mods to the car 🙏

• 
  @335iChris3 ай бұрын

  YESSIR HAPPY UR BACK BRO

• 
  @srbuildz3 ай бұрын

  Thank you bro appreciate the support 🙏

• 
  @cr7.thegaot3 ай бұрын

  Bro can i ask , how wrap did you for the hood , would like to buy it for my car but don't know how much to buy . Would also like to wrap my boot much much material do you think i should get fir both

• 
  @srbuildz3 ай бұрын

  Honestly bro I’m not sure how much material it was my friends already had a roll with them so I’m not sure what length it was

• 
  @Jonapoop_73 ай бұрын

  Happy for you bro, excited for your new build! 🥳

• 
  @srbuildz3 ай бұрын

  Appreciate the support bro thank you 🙏

• 
  @FGNi-em9sb3 ай бұрын

  Nice to see you staying loyal to the N54 platform! Looking forward to this build 💪🏻💯

• 
  @srbuildz3 ай бұрын

  Had to bro thank you appreciate the support 🙏

• 
  @geo335st3 ай бұрын

  Im so happy for you bro! N54 ftw!

• 
  @srbuildz3 ай бұрын

  Thank you bro 🙏 thats right N54 FTW! 😈

• 
  @deivyleon4093 ай бұрын

  Hell yeah man been following your build since the twins , glad you went with another 335 , I was one of the guys that hit you up on insta 😂

• 
  @srbuildz3 ай бұрын

  Haha no way hell yeah thats dope bro really appreciate your support 😎🙏

• 
  @Auradentity3 ай бұрын

  YESSIIRRRR BIG DAWG

• 
  @srbuildz3 ай бұрын

  Feels good to be back 😈

• 
  @KevinBeltran-ni6vo3 ай бұрын

  Can’t wait to see what we gonna be doing with this one🤝🏼👏🏼

• 
  @srbuildz3 ай бұрын

  Oh there’s big plans for this one 😎

• 
  @jasrajsidhu62773 ай бұрын

  Let’s gooo! Excited for the build man

• 
  @srbuildz3 ай бұрын

  Appreciate it bro thank you 🙏

• 
  @out40agu603 ай бұрын

  My boy is back 🔥🔥

• 
  @srbuildz3 ай бұрын

  We cooking with this one bro 😈

• 
  @thiseternity3 ай бұрын

  Woooooooo!!!

• 
  @srbuildz3 ай бұрын

  Thank you! 🙏

• 
  @alexjoedeman65933 ай бұрын

  When finishing the exhaust, did you put back that black peace with the 8 t50 bolts, or did you leave it off?

• 
  @srbuildz3 ай бұрын

  At first yes i put it back but after a while since i would be removing the exhaust for other mods i just left it off eventually

• 
  @alexjoedeman65933 ай бұрын

  @@srbuildz ok thanks, because mine is pushing the exhaust into the guard which might be hitting the driveshaft

• 
  @gonzalojasso89074 ай бұрын

  Friend, I already changed the clock spring pedal sensors and speed sensor and I can't change maps, anything else that I have to do, I would appreciate it.

• 
  @srbuildz3 ай бұрын

  Sorry for the super late reply im assuming you’re tuned right? If you are you would have to take it back to your tuner so he can turn on that feature or sometimes in my case you are changing maps it just doesn’t show on the dash try switching maps and hit the gas to see if you are since you might have the popping map or flame map etc bro

• 
  @Jkwonval5 ай бұрын

  Looks hella fun thanks for the vid ❤

• 
  @jurzyjohner4325 ай бұрын

  Wow i was like what the hell is going on, but then you got the race going on and then i was like that is one race that should be recorded for life, perfect race wow., This is what we need some new joints. Nice piece.

• 
  @ambmotorsports63075 ай бұрын

  How much whp did you make on the speed tech top mount on 24-26 psi

• 
  @arilamar15 ай бұрын

  Should of done a built motor and left cali bro unfortunately cali is not the state you want to be in if you like having a streetable build

• 
  @Yonelll_Kim5 ай бұрын

  😢

• 
  @angieedeesalazar30135 ай бұрын

  Better things are coming 🙏

• 
  @davidblainesbetter5 ай бұрын

  Sorry brother... it was coming along 🙏🏽

• 
  @rileyring41315 ай бұрын

  I bought these for my lci e92. They will through a fog light code but other than that they work fine.

• 
  @CLANMOO6 ай бұрын

  How did you buy them smoked with resistors? I cant find them anywhere

• 
  @BSA2104 ай бұрын

  They are all over ebay

• 
  @redline350zHR6 ай бұрын

  How does someone get sponsored by them or anyone for example?

• 
  @redline350zHR6 ай бұрын

  What intake filters are those?

• 
  @infantryracing32908 ай бұрын

  the n54 and rb26dtt and 2jz are best legend all time engine make.

• 
  @aidonis__8 ай бұрын

  Can do me a favor please, can u tell me how many inches long this spoiler is because i want to use it in other car please i beg

• 
  @angieedeesalazar30138 ай бұрын

  Super dope video 🙌🏿

• 
  @srbuildz8 ай бұрын

  Thank you I’m glad you enjoyed it appreciate the support 🙏