Пікірлер

• 
  @damienristori8376Күн бұрын

  Fabulous figure set really impressive 😊. Thanks for sharing. 🍻🤞🇬🇧😎

• 
  @amusedjesterКүн бұрын

  Thank you for watching. Yes, a very surprising figure and definitely worth the money and addition to any collection.

• 
  @amaury7652Күн бұрын

  where can I get this heman? Can't find it..

• 
  @amusedjesterКүн бұрын

  Thank you for watching. Try BBTS: www.bigbadtoystore.com/Product/VariationDetails/272232?o=4

• 
  @gagemcnamara28343 күн бұрын

  Can't wait for part 3

• 
  @amusedjester3 күн бұрын

  Thank you for watching. McFarlane beat me to the punch but it will be fun to do comparisons.

• 
  @gagemcnamara28343 күн бұрын

  @@amusedjester yes can't waith

• 
  @liquididentity1016 күн бұрын

  This was one of the major missed opportunities with the Vamp. This whole back section should have been modular like this. Remove the turret and use the back as a storage trunk or additional seating for Joes. As much as the Vamp was praised, it missed a lot of play/display features.

• 
  @amusedjester6 күн бұрын

  Thank you for watching. I agree, there's a lot of space back there and the extras on the cobra stinger shows what could have been added. But, it's still not bad for a $75 vehicle of it's size.

• 
  @user-yp4lh5nv9z7 күн бұрын

  Should be NOK’s rule… I wonder if anybody else noticed that that was misspelled… Apparently not the person that painted that on there for Hasbro… Come on Hasbro get your shit together

• 
  @amusedjester7 күн бұрын

  Thank you for watching. I think in one of the streams Lenny actually pointed that out as misspelled accordingly. I can't remember if he said that it's because Torch can't spell or something. It's amusing.

• 
  @davidmartineziii734310 күн бұрын

  Nice snags! I only have 2 of the 1/6 scale suits: the MK iii and the MK 39 starboost. I found my MK iii for so less than it costed to ship it lol. I don’t have any of the die cast ones yet though. Both of these just look so handsome IMO 😄

• 
  @amusedjester10 күн бұрын

  Thank you for watching. Yeah, I just could not walk away from the price. Later in the month, I will do a video of what I got for July; the list is scary but the overall savings is insane. You should keep an eye on e-bay. I don't know what's going on in the collector community to be off-loading items that are waaay below the initial retail value.

• 
  @OGThunderbird11 күн бұрын

  Yeah, I have the same figure. It looks like yours has the hair put on a little bit sideways.

• 
  @amusedjester11 күн бұрын

  Thank you for watching. Yeah it threw me off hard with my first impression. I had an instant dislike on the face and couldn't figure out why until I looked over other reviews. It's a shame because the portrait has really grown on me and it's a great figure and stands out.

• 
  @ricardocarvalho176313 күн бұрын

  Olá!! Qual a escala?

• 
  @amusedjester13 күн бұрын

  Thank you for watching. This is the Batwing from Spinmaster designed for their 12-inch line but I customized to seat a 1/12 figure.

• 
  @muursnorthwestamexem858121 күн бұрын

  Are you taking commissions to fit 3.75

• 
  @amusedjester20 күн бұрын

  Thank you for watching and the compliment. I don't do commissions but I hope my videos would help anyone to venture into their own customs. My process is really simple and shouldn't need expensive tools. Don't be afraid to make your own and experiment. In the end, it will be more rewarding and enjoyable.

• 
  @user-vs7ei7kw9i28 күн бұрын

  Thank you. I have this figure and love it. Way better than Sideshow and these aren't meant to be Hot Toys. They're cartoon-accurate representations and for the price, they're great. Very happy with mine. You seem REALLY hard on the figure. "When comparing this to Hot Toys Batman... " SMH comparing 150 to 400 dollar figure. "Let me start with the negatives.." Nothing positive said for 40 minutes

• 
  @amusedjester28 күн бұрын

  thank you for watching. Actually, when I compared it to the Hot Toys The Batman, what I pointed out was that this figure did it one better. That Hot Toys figure really bummed me out. I actually edited in, badly, a few things I discovered as I futzed with the figure that actually shows how my opinion turned around like the fabric used on the cape. I still think that the value of this product is very high and can be easily enjoyed but I can't help it that when I talk about the cons it is going to sound negative. If you have the sideshow version I would be curious to see a side by side comparison.

• 
  @amusedjester28 күн бұрын

  BTW, thank you for watching it for that long. I fell asleep a couple of times while editing it. Lol.

• 
  @colinsantos907928 күн бұрын

  Thanks for the review! Do you have a link to the magnets you used to help hold the cape down?

• 
  @amusedjester28 күн бұрын

  Thank you for watching. They are called neodymium magnets. They're strong for their size and cheap. This was my last order and it comes with 200 different sized pieces. www.amazon.com/gp/product/B0C8MKZJQB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

• 
  @Ecto_Eric29 күн бұрын

  Great video brother & for the $$$ not a bad figure thanks 🙏 for the look

• 
  @amusedjester29 күн бұрын

  Thank you for watching. That price is just unbeatable and a great start to customize this to fit your needs and collection.

• 
  @FigureFeverАй бұрын

  Great review and congrats on the pick up. I do like the design of this character.

• 
  @amusedjester29 күн бұрын

  Thank you for watching. Yeah, when I saw the promos, this is the figure that made me start and grab the other figures. If you can get past the faded color of the uniform, every other nitpick has been addressed.

• 
  @user-vs7ei7kw9i28 күн бұрын

  Me too. A lot of these guys are seriously hard with their reviews. One guy says "fabric is too thin." This guy says "Fabric is too thick." You can't please anyone these days. I love this figure and 3Z did an awesome job imo

• 
  @amusedjester28 күн бұрын

  @@user-vs7ei7kw9i I did mention stormshadow's thinner fabric which I think works really well for this scale. It folds more naturally. I mentioned that I wished they had used some similar fabric for cobra commander. For the cape's fabric, I originally didn't like it but I inserted an edit which should have actually shown that my opinion turned around as I played with it more. I did consider re-shooting the whole video with the new opinion. But I went with a insert edit to highlight how my opinion changed. I wonder if that was the wrong choice.

• 
  @mocobb4791Ай бұрын

  Nice work. It would be nice if someone made a 3d mold/print of that seat/trunk that was available for sale.

• 
  @amusedjesterАй бұрын

  Thank you for watching. I agree. I have a hard time looking for appropriate 1/12 scale seats or consoles.

• 
  @christisrisen6774Ай бұрын

  Mine broke 6 months after getting one. The left leg Ratchet. I fixed it the best I could with a screw but it'll never have a ratchet click again.

• 
  @amusedjesterАй бұрын

  Thank you for watching. I'm sorry to hear that. It's a much cheaper KO version but it's still a shame that something that feels sturdy should break so easily.

• 
  @richardcamacho904Ай бұрын

  Man you do a lot of complaining about price and gimmicks you are not a true collector you don’t know quality if you feel you can make it better then submit your features or plans on how to make it maybe you should stick to garage sale prices or get yourself a better job so that you can afford to buy good quality toys otherwise this is not for you .

• 
  @amusedjesterАй бұрын

  Thank you for watching and commenting. I actually endorse buying this product once the 1989 Batwing comes out. The combined units make for a great diorama. The only reason I didn't buy it initially was that I don't collect 3 3/4 figures AND the scale itself didn't fit within Spinmaster's movie batman line. IF it had fit the previous The Batman line, it would have greatly expanded the value of the line.

• 
  @OmnivolvАй бұрын

  I got seven of em this morning

• 
  @amusedjesterАй бұрын

  Thank you for watching. I almost bought some as the price was reasonable but I just don't collect this scale and i don't like the limited articulation.

• 
  @nicholashill8724Ай бұрын

  Great in-depth review as always! With your over-riding feeling of Orko being too big, I would like to offer up a couple of alternative perspectives that one could take on this. Firstly is the idea that surely Mondo should take some liberties with scale for their own take on these characters, and for smaller characters it makes sense to make them a bit bigger than they perhaps 'should' be, in order to create a better value product for the likely fixed minimum price point that Mondo need to hit? Secondly, by your logic Beastman and He-Man 'should' be the same scale too right? As they were a similar size in filmation, the original vintage line, and MOTU Classics. Yet off the top of my head, I don't recall you mentioning that Beastman was too big in your review of him. I would have thought your logic should be consistent when it comes to critiquing how different figure's scale with each other when liberties are taken with scale on many of Mondo's own designs. Either it's always wrong, or it's never wrong, as opposed to it sometimes being wrong.

• 
  @amusedjesterАй бұрын

  Thank you for watching. You're quite correct. Even as I prefer the Orko "accessory" to the actual Orko, I thought myself that the simplistic and cartoonish design would clash with Mondo's design. It was quite a puzzle to determine how I would resolve the issue of "scale" in my mind. I think I wasn't quite referring to scaling them as they were in the cartoons but as how they should scale towards each other. For Beastman, I am glad that they shrunk it down a little from the first photo release but it is much bigger than a regular Mondo figure. But in Beastman's case, Mondo won me over with their design, product and logic. Beastman, by name, should be bigger, almost hulking and have that "beast-like" appearance. With Orko, I still see him as an adolescent apprentice. Not that he is in the cartoons' it's just his behavior and actions made him that way to me. And when you pose him side by side with a Mondo figure he is just slightly too big for me. One thing, I have been thinking on is the robe. If the cloth part of the robe were not there and the figure ended at the vest; I think that actually works better for me. But, you can't hide the robe under the vest because that exposes the folded legs of the figure. In the end, I think it will "grow" on me. Get it? Hahaha.

• 
  @nicholashill8724Ай бұрын

  @@amusedjester Haha, yes, what you say makes sense! By adding these extra features to Orko, such as the legs, they were forced to make him bigger, but then that also works out better from a value perspective. Mondo's take on the character is definitely a more serious design compared to the cartoon, but it fits in better with the line as a whole. Will you be getting the deluxe Scareglow and Scare-Mare? Mondo showed off a prototype of each of them at the recent Monsterpalooza event.

• 
  @amusedjesterАй бұрын

  @@nicholashill8724 It's not on the basic fund list that I had allocated for Mondo but OMG are they not gorgeous? BUT if I get Scareglow with Scaremare, I would have to get Swiftwind. Two things that may convince me more is the final paint app for both and how the wings can be folded on Scaremare. They're beautiful spread out but I'm desperate on space right now. How about you?

• 
  @Jedi-DeniАй бұрын

  $4.00 per figure, you can't beat that! Its almost mandated that you have to pick them up at that price. Fabulous, secret savings were revealed to me the day I held aloft my magic wallet and said: "By the Power of Ross Pay For Less! I have four dollars!!! (It was either that or "By Grabthar's Hammer, what a savings") 😉

• 
  @amusedjesterАй бұрын

  Hahaha! He-man And Galaxy Quest. Brilliant!

• 
  @Ecto_EricАй бұрын

  Great score my friend

• 
  @amusedjesterАй бұрын

  Thank you for watching. $4 each, I think the last time I saw action figure retail for that was in the 1990s.

• 
  @impossiblepieАй бұрын

  the matte finish 89 batmobile version is the gold label that comes with the figure correct?

• 
  @amusedjesterАй бұрын

  Thank you for watching. Yes, it is. It's been on sale for some time at $65 on amazon.

• 
  @impossiblepieАй бұрын

  @@amusedjester yeah I'm in Canada and noticed the price drop so now I'm thinking of getting it but the cag set is currently out of stock.

• 
  @amusedjesterАй бұрын

  @@impossiblepie Ace from Ramen toys just did a livestream where he mentions a possibility of doing another run of it. I think he just might especially when he reveals and opens for pre-order the CaG 2.0

• 
  @impossiblepieАй бұрын

  @@amusedjester awesome!

• 
  @amusedjesterАй бұрын

  @@impossiblepie np, here's the link to his stream and he mentions it at the 8:11 minute mark. kzread.info/dash/bejne/jKttzdydh83Kkbg.html

• 
  @professionalcommenter73752 ай бұрын

  The bat suit progression u described is pretty much how it was in the Arkham Batman games. He started out in origins with a padded tactical suit but the better he got with stealth and combat, the more armor he stripped off in favor of agility

• 
  @amusedjesterАй бұрын

  Thank you for watching. I really tried to get into the Arkham games and over the years have been trying to convince myself to try them again. I actually have all the games in my collection, lol.

• 
  @-Anonymous-.2 ай бұрын

  Easy, but didn’t have a slim enough screwdriver. Got a slimmer one & it still wasn’t small enough to fit inside each hole… ehhh.

• 
  @amusedjesterАй бұрын

  Thank you for watching. Yeah, I had that problem years back, so I ended up buying some cheap screwdriver and other tools made to fit into smaller holes. It really is a very easy replacement process.

• 
  @faouzielouakili28332 ай бұрын

  It more like knight armor i like cool

• 
  @amusedjester2 ай бұрын

  Thank you for watching. Yes, it has a more realistic design, being bulky and older. Probably why I was so excited for its release.

• 
  @Ecto_Eric2 ай бұрын

  Thank JR for the look at him I’m on the fence what company to go with for this version of Batman great review brother

• 
  @amusedjester2 ай бұрын

  Thank you for watching. I'm glad my review helped you on the decision. I'm still torn with the figure only because of what Hot Toys pulled with the gun. You should watch Jedha Patrol's comparison. The visuals, for me, really show that this one looks better overall but the quality may be in Inart's favor. I am uploading a comparison with all the Hot toys Batman later on if it will help you further.

• 
  @FarNax-sj7gt2 ай бұрын

  Does the Batman also feel same?

• 
  @amusedjester2 ай бұрын

  Thank you for watching. Saturn/mars toys have made improvements on the Batman figure so that the trunks actually fit/looks better. But the original has an inner lining that gives it a wider torso. For the price, it's a good value.

• 
  @shazmanbound14962 ай бұрын

  Did u used oil based paint? How well that's the paint stick to the plastic?

• 
  @amusedjester21 күн бұрын

  Thank you for watching. These are Vallejo acrylic paints. It's stuck pretty good considering I didn't do any surface preparation at all; no primer paint and I don't think I even washed it with water and soap. But these aren't figures where paint rub will occur on joints and there really aren't going to be surface friction occurring to disturb the paint too much.

• 
  @julianb.55872 ай бұрын

  What scale are those figures?

• 
  @amusedjester21 күн бұрын

  Thank you for watching. I don't know why your comment didn't register to my usual place. But to answer your question; these are 7 inches. I don't think it has a proper scale designation. These would line up with the McFarlane figures. Scale tends to be different from companies. I have found RC vehicles that are 1/10 scale that these figures fit perfectly into, while 1/12 vehicles are too small for hasbro's joes or marvel figures.

• 
  @frankierivera54512 ай бұрын

  Got my set in and it was broken

• 
  @amusedjester2 ай бұрын

  Thank you for watching. Ouch! contact ramen toys for a replacement. I'm almost sure it won't be an issue, although having to wait for a replacement sucks.

• 
  @privateprivate313372 ай бұрын

  I got my set and installed it tonight. It's totally worth it IMO. The lipgate is a non issue. I am glad Ramen Toys went back to fix it.

• 
  @amusedjester2 ай бұрын

  Thank you for watching. I agree, I can't even see any of the gap that occurred during the GDL review. The delay was worth the time/effort it took to fix the issue.

• 
  @Ecto_Eric2 ай бұрын

  Thank you JR this is incredible I will be getting this for Batmobile, great review brother

• 
  @amusedjester2 ай бұрын

  Thank you for watching. I hope Ramen toys is still offering it up. It really is a great upgrade and once the seat and cockpit is out; we will finally get a good 1/12 scale 1989 Batmobile. Although, I have to say; to make it perfect, we would need to re-paint the car to match the paint job on Ramen Toys CaG set.

• 
  @RAMENTOY2 ай бұрын

  Thank you Sir for your unbiased review. Thank you for the purchase.

• 
  @amusedjester2 ай бұрын

  Thank you for watching. Hey, no problem. To be honest, the biggest problem your CaG set has given me now is that the paint job is so much more superior than the original toy that I either have to repaint the car to match or really squint my eyes to not see the difference in paint quality, lol.

• 
  @chadlaurie49042 ай бұрын

  Great review. I just switched my canopy out. Mcfarlanes Batmobile looks alot better with Ramen Toys Cag set. Good job

• 
  @chadlaurie49042 ай бұрын

  Good job with the Cag Set @RAMENTOY

• 
  @amusedjester2 ай бұрын

  @@chadlaurie4904 Thank you for watching. I am looking forward to the second part of Ramen toys upgrade to this thing.

• 
  @impossiblepieАй бұрын

  Ace, any chance you'll make more matte Cag sets?

• 
  @jamesstolk98482 ай бұрын

  I have grabbed all three and I hope we get more. I want prince baron and flash in the white shirt at least. Nice review man.

• 
  @amusedjester2 ай бұрын

  Thank you for watching. Absolutely!! I am really hoping they expand on the characters they produce.

• 
  @nicholashill87242 ай бұрын

  There seems to be a varnish on the purple fur area of the Panthor heads, but not on the green/yellow fur area of the Battle Cat heads. As a result, the Battle Cat heads tend to pop more, and have more of a 'painted statue' look to them, and the Panthor heads still look very good but not quite as good to me. I wonder if this new gloss/varnish that Mondo are applying to their figures is to decrease paint chipping? I noticed you pointing this out in another review where you compared Deluxe Skeletor's paint to Hordak's paint; it was a semi-gloss vs completely matte finish.

• 
  @amusedjester2 ай бұрын

  Thank you for watching. Yes, Mondo has changed their paint application after the He-man deluxe. It's a little bit more shinier but it feels less prone to scuffing and paint damage. And Panthor does have a sheen to it's body compared to Battlecat.

• 
  @nicholashill87242 ай бұрын

  @@amusedjester Do you prefer the sheen? I wonder whether the sheen from the varnish is to protect the paint on the hinges, as the He-Man loses all the paint on the hinges of the elbows/knees once you move the arms and legs a bit and all the paint scrapes off. Whereas the Deluxe Skeletor, the paint on the hinges possibly stays there longer and matches the paint on the arms and legs to help hide those joints a bit better? I think they changed the paint at the point when they changed the bases from the old Mondo base to the new cracked earth oval bases, and they removed the magnets from the boxes and replaced with velcro. The first Trap Jaw release does not have a sheen on him and he comes with the old base and box magnets, and he was released after Deluxe H-Man. I think Prince Adam has the old base too, so this change seems to have occurred post-Prince Adam and pre-Deluxe Skeletor, Beastman and Panthor. However I do not have Beastman myself yet so I cannot tell if he has the sheen on him, he does have textured hinges though which looks cool. You mentioned in your Beastman review that he looks much better in person than through the camera, so I am looking forward to a Beastman figure when I finally get him so that I can understand better what you are referring to. 🙂

• 
  @lokiwartooth11382 ай бұрын

  Where did those two mini guns come from

• 
  @amusedjester2 ай бұрын

  Thank you for watching. If I remember correctly those were kits I bought off e-bay. I think each one was $10?

• 
  @lokiwartooth11382 ай бұрын

  Acrylic paint won't hurt foam. Only solvent based paints will.

• 
  @amusedjester2 ай бұрын

  Thank you for watching. Yeah, I sometimes use it as a protection layer on foam. I experiment a lot since I don't really know a lot. Thankfully, I am ok if anything gets ruined with anything I do as I can always make a new one. Who knows? The newer attempt could be an improvement.

• 
  @lokiwartooth11382 ай бұрын

  @@amusedjester right on never know till you try. Have you checked out other guys doing vamp stuff. Check out Aaron the toy enhancer

• 
  @amusedjester2 ай бұрын

  @@lokiwartooth1138 Oh yeah, at first I didn't recognize the name but I remember that I saw him upgrade his vamp into that RC; he did a lot of upgrades on his. I love and am inspired by other youtubers and I always try to shout out my inspirations in my videos. Have you seen that custom vamp where he added more seating room in the back and an actual mounted turret? I swear some of these guys are plain awesome.

• 
  @lokiwartooth11382 ай бұрын

  @@amusedjester no I haven’t. Hey man come by the live shows and join in on the chats. Nothing but great guys. I do 3d printing. And other guys do dioramas, some do kit bashing, and conversions. Check out Aaron and crusty ole crow.

• 
  @gearhead86812 ай бұрын

  This model is a joke

• 
  @amusedjester2 ай бұрын

  Thank you for watching. I actually went and bought the Polar lights Enterprise refit for $100 and that was just the plastic model. I did more research and found that I could probably find the complete light kit with the board for $250. I still would need to assemble, sand, fill and paint. I'm still hoping they Tomy will eventually get do the Refit version and I'll just buy that.

• 
  @LosMSR3 ай бұрын

  i like that you were very honest about the materials, like gummy joints, bc that's a market point right there. I like this set, I think the alt heads are great, and the figures are good too, but yeah, there is always important to see the cons of a figure. Some other reviewers are too vanilla in this topic.

• 
  @amusedjester3 ай бұрын

  Thank you for watching. Yeah, I just want to review my toys and the value I perceive from them. The videos I put out are basically me trying to digest they toys I have just bought; so being as honest as I can to see how I feel about each figure. The Wasp headsculpt/paint app though, is just amazing. I'm about to review the retro scarlett and I'm going to bring up/compare it with the wasp portrait.

• 
  @Ecto_Eric3 ай бұрын

  Great figure set & review thanks 🙏 for the look

• 
  @amusedjester3 ай бұрын

  Thank you for watching. yeah that Wasp is top notch.

• 
  @topknot013 ай бұрын

  The gummy joints are finally back 💪😏

• 
  @amusedjester3 ай бұрын

  Thank you for watching. Hahaha, yeah super gummy. By just bending the knees you see them stretching horrendously.

• 
  @indarkestknight13 ай бұрын

  I wish more people would pay attention to this. And that's not including that Marvel Legends are creeping up to the thirty dollar mark.

• 
  @amusedjester3 ай бұрын

  Thank you for watching. I don't blame people for overlooking it. I'm guilty of it as well. I knew instinctively that I don't want to pay $30 for a McFarlane figure. It's not until you have them side by side that you see the value of each product. The funny thing that people don't yet realize is that Todd McFarlane, himself, acknowledges this because he sells the same figure/configuration still at the $20 mark. Why does Todd see some figures at $20 and some at $30? Because he can, that's it. Take it from Todd, the horse's mouth; People buy Batman figures, so he keeps making Batman figures. If people buy his figures for $30, he'll keep selling them for $30.

• 
  @indarkestknight13 ай бұрын

  @@amusedjester Not only that but most of the collectors edition figures are brand new molds. So he's squeezing the customer for that up from so he can reissue them Later. A series that you could have also included was the WWE ultimate editions. 7 inch scale figures, three alternate heads minimum, six hands, title belt, and soft goods. I feel that if Big Daddy Todd included this stuff his collector's edition would be worth it.

• 
  @indarkestknight13 ай бұрын

  @@amusedjester Also if super 7 ultimates were 35 Max they would be the best figures on the market I believe.

• 
  @amusedjester3 ай бұрын

  @@indarkestknight1 I'm not a wrestling fan but sometimes when I see that line I'm tempted to buy it. It's by Mattel and I'm still confounded why they couldn't do the same when they had the DC license.

• 
  @amusedjester3 ай бұрын

  @@indarkestknight1 I agree. At the $35 or even $30 price, a lot of Super7 faults could be ignored and would have been the best one. Honestly, Neca is the top for me. It's a shame that their subject figures aren't totally in my area of collection. But for the price and what you get from Neca, it's hard to find something to complain.

• 
  3 ай бұрын

  Marvel select is the best line for me based on what you get for the price .

• 
  @amusedjester3 ай бұрын

  Thank you for watching. For the $30 price range, I agree. Marvel Select still has it's faults though. The Thing was released in 2010, so it took them 14 years to finish FF. Neca figures are slightly higher at $40 but the jump in quality is substantial, I think.

• 
  3 ай бұрын

  @@amusedjester hasbro hasnt finished many teams either the whole time they have had the license . Yea i like neca but all their making now is tmnt stuff which i dont buy so they pretty much have lost me as a customer the last year or so . But you have to compare license with license so for me select is better than marvel legends especially now . Every toy line has issues .

• 
  @GeekSpeak_Hub3 ай бұрын

  This was such a cool video

• 
  @amusedjester3 ай бұрын

  Thank you for watching and the comment.

• 
  @Weremoogle3 ай бұрын

  They're great looking. Best looking affordable versions. Just wish they were more standard 1/12th scale.

• 
  @amusedjester3 ай бұрын

  Thank you for watching. I agree, that's why it took me more than 10 years to add it to my collection. Ironically, if it weren't for the rapid proliferation of McFarlane dc multiverse line in my collection, I never would have gone solidly into a 7 inch line.

• 
  @austincrafton1783 ай бұрын

  Great discussion my problem with McFarlane products there's never any extra hands and all his figures have way too big wrist and ankle pegs & the flesh tone paints he uses are cheap please DC give your license to another company .

• 
  @amusedjester3 ай бұрын

  Thank you for watching. Or how about Robin being as tall as Batman; figures with a bad sense of scale? Or paying 30 on a gold collector edition and having the back side unpainted? As collectors/supporters of the McF DC line from the beginning a lot of these little faults were overlooked because of his cheaper price but they can't be at $30. Not when his competitors are producing far better value. And his motto is more accurate as, " I HOLD the DC license, if you don't like it then don't buy it."

• 
  @austincrafton1783 ай бұрын

  @@amusedjester your right. its a conversation that needs to be had. Plus everything you said I could've not said it any better as you put it. I will never support MacFarlane products he's always overly selling himself like a con- artist and not always delivering like he suppose to for example the new spawn movie. It's like I mentioned earlier it makes no sense to pay for something and your getting less than compared to the other companies example no extra hands or head sculpts.

• 
  @rwrobo2023 ай бұрын

  This video moves too slow. A lot of messing around but not a lot getting accomplished. This should be edited to be a fairly fast moving video showing what you are doing and getting done, not me watching a video of watching you in your basement.

• 
  @amusedjester3 ай бұрын

  Thank you for watching. I agree. I have a more recent video of what I did to the G.I. joe Vamp. In that one, the first 5 or 10 minutes I showed the final piece and what I changed. Then, if people wanted to stick around to see the process. I did a 10x speed through. Check that that out and tell me if that's a better format and thanks for the input.

• 
  @morkymoose95903 ай бұрын

  That Superman figure has been reused like 20 times.literally lol

• 
  @amusedjester3 ай бұрын

  Thank you for watching. Yeah, that's me being generous to McFarlane products. I think it comes from being used to DCUC bucks being re-used or even Marvel legends. But I think i'm over being forgiving when the price climbs to that level.

• 
  @Huknu23 ай бұрын

  Enjoyed your commentary on the different companies. Good information! Thanks for posting!

• 
  @amusedjester3 ай бұрын

  Thank you for watching. Individually, it's easy to overlook the inadequacies of certain toylines. Specially when it started off at a much lower price point. I'm glad you found it informative and enjoyable enough.

• 
  @Ecto_Eric3 ай бұрын

  Great review & figure thanks for the look at him JR

• 
  @amusedjester3 ай бұрын

  Thank you for watching.

• 
  @Ecto_Eric3 ай бұрын

  Great review & figure thanks 🙏 JR

• 
  @amusedjester3 ай бұрын

  Thank you for watching.