Spectrum Virtual Assistants

2 жыл бұрын

ArchiCAD 25 - How To Draw A Modern Stair In ArchiCAD 25 [ Tips and Tricks ]

Пікірлер

@sympadm374219 күн бұрын

Literally does not do anything sensible. How do you have your building rotated as per project north and survey north ( for floor plans and site plan)

@SpectrumVirtualAssistants19 күн бұрын

In Archicad 27, you can rotate your building to align with both project north and survey north using the following steps: Setting Project North 1. Open the Project Map: o Go to View > On-Screen View Options > Project North. 2. Adjust Project North: o Use the Rotate Orientation tool to rotate the entire building model so that it aligns with the desired project north direction. Setting Survey North 1. Import or Create the Survey: o Import the survey data or create a survey plan within your project. 2. Align Survey North: o Place the survey data correctly within the site plan. o Use the Rotate Orientation tool to rotate the survey plan so that it aligns with the survey north direction. Synchronizing Both Orientations To switch between project north and survey north views in your floor plans and site plan: 1. Create Two Different Views: o Create one view with the building rotated to project north. o Create another view with the building rotated to survey north. 2. Save the Views: o Save each view in the Navigator under the appropriate category (e.g., Floor Plans, Site Plan). 3. View Settings: o For each saved view, go to View Settings and make sure the Orientation is set correctly (either Project North or Survey North). Using the View Map 1. Access View Map: o Go to the Navigator and open the View Map. 2. Adjust Orientation in View Settings: o Right-click on the specific view and select View Settings. o In the Orientation section, choose either Project North or Survey North. By using these steps, you can manage and switch between project north and survey north orientations for your building's floor plans and site plans in Archicad 27.

@bkn672824 күн бұрын

BEST SO FAR

@SpectrumVirtualAssistants19 күн бұрын

Thank You!

@OnlineMathsAcademy26 күн бұрын

Thank you

@SpectrumVirtualAssistants26 күн бұрын

You are a welcome

@OmondiWaga-zm2gvАй бұрын

This is the first tutorial I landed on and I don't plan on doing another tutorial. You are a great resource, it took me less time than I was expecting because of how precise and detailed your work is. I am grateful the universe direct me to your page, asante ndugu, amazing work. Now I only plan to go through your Library.

@SpectrumVirtualAssistantsАй бұрын

Thank you!

@Pascal207Ай бұрын

Please how did you even get new mesh point couz me i can't find it in archicad 28

@SpectrumVirtualAssistants19 күн бұрын

In Archicad 27, you can add a new mesh point to your terrain or mesh using the following steps: 1. Select the Mesh Tool: o Click on the Mesh Tool from the Tool Box. 2. Activate the Mesh Tool: o Ensure the Mesh Tool is active by clicking on it in the Tool Box. 3. Select the Mesh: o Click on the mesh in your project to select it. 4. Add a New Mesh Point: o Right-click on the selected mesh. o Choose Insert New Mesh Point from the context menu. o Click on the location within the mesh where you want to add the new point. 5. Adjust the Elevation: o Select the newly added point. o Adjust its elevation by entering the desired Z-coordinate value in the Info Box. Detailed Steps with Screenshots 1. Select the Mesh Tool: 2. Activate the Mesh Tool: 3. Select the Mesh: 4. Add a New Mesh Point: o Right-click on the selected mesh and choose Insert New Mesh Point. 5. Adjust the Elevation: If you still can't find the option, it might be helpful to check the official Archicad documentation or look for tutorials specific to adding mesh points in Archicad 27.

@EddyLowe-ip6cyАй бұрын

bro just talk how you would talk to your friend

@SpectrumVirtualAssistantsАй бұрын

I don't get what you mean

@rosemarybwalyanjobvu2864Ай бұрын

Sir you never showed how to draw the sections how may we do it ?? 15:07

@SpectrumVirtualAssistants19 күн бұрын

To create sections in Archicad 27, follow these steps: Step 1: Activate the Section Tool 1. Open the Tool Box: o Locate the Tool Box on the left side of your screen. o Click on the Document tab to reveal the Section Tool. 2. Select the Section Tool: o Click on the Section Tool to activate it. Step 2: Place the Section Line 1. Draw the Section Line: o Click on the starting point of the section line in your floor plan. o Drag to where you want the section to end and click again. 2. Define the Section Depth: o After placing the section line, you will be prompted to define the depth of the section. This determines how far back the section will cut through the building. o Click to define the depth. Step 3: Adjust Section Settings 1. Open Section Settings: o Select the section line you just created. o Open the Section Settings dialog by right-clicking the section line and choosing Section Settings. 2. Modify Settings: o In the Section Settings dialog, you can adjust various settings such as the section name, marker style, and drawing scale. Step 4: View the Section 1. Open the Project Map: o Go to the Navigator on the right side of the screen. o Expand the Project Map. 2. Locate the Section: o Find the Sections folder and expand it. o Double-click on the section you created to open it. Step 5: Refine the Section 1. Edit the Section: o Use the various drawing and editing tools to refine the section view. o You can add dimensions, annotations, and other details to your section. Tips for Working with Sections • Multiple Sections: You can create multiple sections by repeating the above steps. • Adjusting Section Lines: You can move or adjust the section lines after placing them by selecting and dragging the ends or the whole line. • Updating Sections: Any changes made to the model will automatically update in the section views. Visual Guide 1. Activate the Section Tool: 2. Place the Section Line: 3. Adjust Section Settings: 4. View the Section: By following these steps, you can create and refine sections in Archicad 27. If you encounter any issues, refer to the official Archicad documentation or tutorials for additional guidance.

@mohamed-salimsahib3066Ай бұрын

you r the boss thanks !

@SpectrumVirtualAssistantsАй бұрын

Welcome

@rosemarybwalyanjobvu2864Ай бұрын

Hello how do you manage to unselect the other wall 4:22 , and how do cut out walls from selections ? 😢

@SpectrumVirtualAssistantsАй бұрын

Hi Rosemary, In ArchiCAD, to unselect a specific wall, you can hold down the Shift key and click on the wall to toggle its selection state. Alternatively, you can use the Marquee Tool by holding Shift and drawing a marquee around the wall to unselect it, or you can go to Edit > Edit Selection Set and deselect the specific wall in the palette. To cut out walls from selections, you can directly select the walls you want to keep and hold Shift while clicking on the walls you want to remove from the selection. Another method is using the Find & Select command (Ctrl + F), setting criteria to filter the walls, clicking Select Elements to apply the filter, and then cutting or deleting the selected walls. You can also use Select All (Ctrl + A), then hold Shift and draw a marquee or click on the walls you want to deselect. Thank You🙂

@user-uf9lz2vt1p2 ай бұрын

Спасибо огромное!!!!!!!

@SpectrumVirtualAssistants2 ай бұрын

You are welcom!

@abdennour1202 ай бұрын

but how i can see it in 3d it doesnt work you can only see it in 2d like in the video

@SpectrumVirtualAssistantsАй бұрын

Hi, you have to draw it. Here is a tutorial on how to do that kzread.info/dash/bejne/g6Or2tV8ktS4nbQ.htmlsi=UNTWBmu_1kvzcuzR Thank you.

@jaybeesab-a83813 ай бұрын

how to make a reflected ceiling plan in ArchiCAD?

@SpectrumVirtualAssistants2 ай бұрын

Hi Jay, I will make a tutorial about that.

@bhma1003 ай бұрын

Thanks my brother. Could you also be having a on how to generate 3D in Autocad or Artistic impression of a finished design