Пікірлер

• 
  @juanjmolinaКүн бұрын

  correct me if I am wrong but this system is very similar to the PureBlueH2O system that costco sells.. And it seems the filters are exactly the same type. Would it possible to use the Culligan filters on the PBH20 system since the company does not have any filters on their website and Amazon no longer has stage 3 filters on sale. Anyone got insight on how to find alternative filters, Im curious to see if the filter fits the system..

• 
  @jennyfreckleface2 күн бұрын

  Great informative video. I watched another video before and it was confusing. Your instructions were awesome. Thank you.

• 
  @DoityourselfwithjoeКүн бұрын

  You're welcome!

• 
  @plingfan54083 күн бұрын

  *immediately goes under the ratchet release

• 
  @c-daddy31293 күн бұрын

  Bactine spray over the itchy area works amazing. Obviously it doesn't fix the problem but it can make the last few hours of the workday bearable until you can get home and take that cool shower

• 
  @phantomlord19814 күн бұрын

  Looks awesome

• 
  @Doityourselfwithjoe4 күн бұрын

  Thank you!

• 
  @blackpine66934 күн бұрын

  How about inside the unit….there is about 1 1/2 feet of pipe that’s not insulated inside……

• 
  @Doityourselfwithjoe4 күн бұрын

  No it does not need to be insulated.

• 
  @KNIGHTRACEDOTCOM4 күн бұрын

  good video

• 
  @vdubsterw25167 күн бұрын

  My grandfather used to keep vinegar in the fridge. He would soak a cotton ball in cold vinegar and wipe his skin off to remove fibers. He swore by it.

• 
  @pumpupthevolume47758 күн бұрын

  Crappy job. Looks bad. Won't hold up. Was hoping for an actual solution.

• 
  @Doityourselfwithjoe6 күн бұрын

  The only solution I know of is getting new counter tops. This is only a way to clean things up and make it look better, it will need to be repeated again when they start looking bad.

• 
  @dasfahrer81879 күн бұрын

  Not the right tape for that. They make tape specifically for this task.

• 
  @lulubebe390113 күн бұрын

  Thank you!

• 
  @Doityourselfwithjoe13 күн бұрын

  You're welcome!

• 
  @SpaghettiKing7713 күн бұрын

  Very informative

• 
  @SpaghettiKing7713 күн бұрын

  This was awesome

• 
  @Doityourselfwithjoe13 күн бұрын

  Thank you!

• 
  @user-ox6nc6ly7f14 күн бұрын

  4:10 way too fast, smoke mean slow down. most drill are too fast for s.st. i use a 500 rpm drill for sticky alloys. often without oil or any coolant.

• 
  @colleend297719 күн бұрын

  Thank you!

• 
  @AnnewithanA7321 күн бұрын

  Joe, thanks for the video and a great do it yourself project. My family made me one for Mothers Day and I just love it. I have about 13 different feeders on it so far. Pre drilling holes at regular intervals made it so much easier to attach hooks for the feeders!❤

• 
  @Doityourselfwithjoe21 күн бұрын

  That's awesome! Thanks for sharing! Mine is still in great shape. It does need to be pressure washed and needs some minor repairs to the small spacer blocks. other than that the squirrels and the raccoons eat the left overs from the ground.

• 
  @gtrance356722 күн бұрын

  Now, what do you do in situation if the strap is too long? Thank you.

• 
  @Doityourselfwithjoe21 күн бұрын

  For me, I just wrap it around the ratchet and tie a slip not to keep it from flapping in the wind.

• 
  @MeghanDonnellyIPY23 күн бұрын

  Thank you so Much for this video

• 
  @Doityourselfwithjoe23 күн бұрын

  You're welcome!

• 
  @faithsmith365024 күн бұрын

  Thank you so much for the information this saved me a lot of time and money

• 
  @Doityourselfwithjoe24 күн бұрын

  You are very welcome!

• 
  @ROBERTHOCKER26 күн бұрын

  I use an old trick from the 1960s. I use pantyhose in the shower to wipe it off. The itching stops in 10 seconds or less [ usually 3 seconds]. The tiny holes in the pantyhose trap the glass in the hose

• 
  @Doityourselfwithjoe26 күн бұрын

  I never heard that, thanks for sharing!

• 
  @ROBERTHOCKER25 күн бұрын

  @@Doityourselfwithjoe you are very welcome It is an excellent tri k of the trade.

• 
  @AdamFerrell-wy8vk26 күн бұрын

  Cool I learned a lot,thanks bud

• 
  @Doityourselfwithjoe26 күн бұрын

  You're welcome!

• 
  @MatteBlack202428 күн бұрын

  Lysol did NOTHING with rust inside porcelain toilet.😢

• 
  @Doityourselfwithjoe27 күн бұрын

  I didn't do anything in my toilet either until I took all the water out of it and let it dry out. Then it worked fine for me.

• 
  @lenlembo533128 күн бұрын

  You are not "building" a "propane gas burner" . . . you are just REPAIRING TH EXISTING BURNER . . . . DOH!!

• 
  @allenparker13Ай бұрын

  I'm impressed.... You did a great job on your DIY bird feeder! 👍

• 
  @DoityourselfwithjoeАй бұрын

  Thank you!

• 
  @JuanMartinez-df1lcАй бұрын

  Thank you

• 
  @DoityourselfwithjoeАй бұрын

  You're welcome!

• 
  @TAT2DslumericanАй бұрын

  Your an absolute legend sir, Thank you!!!

• 
  @DoityourselfwithjoeАй бұрын

  You're welcome and thank you!

• 
  @KinsleyOwensАй бұрын

  The likes 💀

• 
  @mikemastantuonoАй бұрын

  does this style not have a ballast?

• 
  @DoityourselfwithjoeАй бұрын

  No it does not. You will see a small black piece that looks like a usb drive for a computer. That is a thermal link. If the light gets to hot it will shut the power to the light until the temperature come down.

• 
  @billnipp2309Ай бұрын

  so the under part of the door doesnt chip?

• 
  @DoityourselfwithjoeАй бұрын

  No it doesn't. Because of the way the blade turns it will not chip the bottom. Thats why I score the veneer with a razor blade so the blade doesn't chip the top.

• 
  @jonathancowdin377523 күн бұрын

  Festool track saw would have done that 3 times before you finish 1, and all three cuts would be better than a free hand cut, if you've been doing it for 30 years it's time to upgrade my friend

• 
  @jojomick123 күн бұрын

  @@jonathancowdin3775 maybe he need not upgrade been doing it for 30yrs ..., why upgrade now ..hes happy

• 
  @carlostradessАй бұрын

  How do you separate all the layers? I’m trying to make the Real Madrid logo on my shapeoko and I can’t wrap my head around the separation of layers

• 
  @DoityourselfwithjoeАй бұрын

  I did that in carbide create. I picked out the areas that I wanted to be the top layers. For me i chose to have the dark as the depressed areas and the light as the raised areas. When they were separated in carbide create I turned off sections so i could envision what I was looking for.

• 
  @One1CriticАй бұрын

  Is this actually a vid on "what not to do?" because I've seen multiple vids saying that you need one bead line across the bondo. Also the mixing like you're mixing a pot puts air bubbles into the bondo. You should use a figure eight mixing method.

• 
  @leadhead3966Ай бұрын

  nice demo

• 
  @DoityourselfwithjoeАй бұрын

  Thank you!

• 
  @curtiseli542Ай бұрын

  Thanks a lot

• 
  @s78c9jiАй бұрын

  Thank you

• 
  @DoityourselfwithjoeАй бұрын

  You are welcome!

• 
  @jackasshollerАй бұрын

  Hoping you just saved me a lot of time. I put shiplap(nickel gap) walls up and used a Brad nailer. Will this method work for filling the brad nail holes before I paint? The walls are already primed white and I’m just going over with another coat of white paint.

• 
  @DoityourselfwithjoeАй бұрын

  This will work perfectly! When wiping the excess away try different ways that best suits you. For me lately taking the excess off with a fine sanding sponge works well for me. Sometimes wiping with my finger or thumb works well. Once you see what works for you stick with it and it will make life easier for you. Let me know how it goes!

• 
  @harveybuhl4195Ай бұрын

  Thanks, thanks for the leanings

• 
  @davesteigerwald4474Ай бұрын

  Where do I buy these replacement filters?

• 
  @DoityourselfwithjoeАй бұрын

  I got mine from Culigan

• 
  @LuoBin-th5sjАй бұрын

  Think i sprayed too much wd40? It's smoking after i oiled it..

• 
  @DoityourselfwithjoeАй бұрын

  is it smoking from the pulley? If it is wipe some off. If it is still smoking the bearing on the pulley may be to far gone.

• 
  @LuoBin-th5sjАй бұрын

  @@Doityourselfwithjoe Not sure where it's smoking at. Think it might be the bearing. The parts come in on Thursday. I'll make sure to update my comment here just in case anyone else has issues. Thanks for the help. I greatly appreciate it.

• 
  @ryan3390Ай бұрын

  I been trying to drill through SS with cobalt bit slow and cooling but still wont work

• 
  @ms.beautifulgorgeousbeasle4110Ай бұрын

  You started talking in the middle of a sentence as if this is our third day using a ratchet you have to say what each piece is and then when you say facing up to no one can see that listen I crochet grab a hook and tie a knot and let's go. Smh

• 
  @larrycorman6465Ай бұрын

  I doubt this stopped squirrels. They can reach the feeders by just jumping from the ground. They need to be higher. Believe me, I know from experience…

• 
  @DoityourselfwithjoeАй бұрын

  no squirrels and no racoons. The squirrels stay at the bottom and get the leftovers! There is two layers of duct work. The raccoons could climb the 4" so i installed the second layer over the 4".

• 
  @pbrooks4040Ай бұрын

  will this work with pre-stained mdf?

• 
  @DoityourselfwithjoeАй бұрын

  so you mean preprimed? If so yes.

• 
  @pbrooks4040Ай бұрын

  @@Doityourselfwithjoe yes. so, sorry. i shouldn’t stay up so late. and fantastic news! thanks. i’ll do a quick test run before i go into production mode.

• 
  @DoityourselfwithjoeАй бұрын

  @@pbrooks4040 let me know how it goes. If you need any questions answered I will be happy to answer!

• 
  @growupsissyАй бұрын

  That's hilarious

• 
  @WhiteWizard420Ай бұрын

  I just got stupider... thanks for killing points of my IQ

• 
  @American_Trucker_1776Ай бұрын

  Dude. Thank you thank you thank you!

• 
  @DoityourselfwithjoeАй бұрын

  Glad to help!

• 
  @garrygiordano4059Ай бұрын

  I appreciate your attention to detail, your craftsmanship and the more finished look achieved by your use of molding. In my home the builder set the bifold doors deeper into the opening which allowed the installation of a more substantial brick mold to be used in the same way you used the base shoe.

• 
  @DoityourselfwithjoeАй бұрын

  Thank you very much!

• 
  @motosaki404Ай бұрын

  Jesus H you did everything wrong. Cardboard sucks out moisture, and mixing it in circular motion creates air pockets which result in pinholes. Maayb don't make instructional videos of things you don't understand

• 
  @user-up3vx2hk1q9 күн бұрын

  Exactly! I totally agree. Now go make your video and show him how it's done you bad ass!

• 
  @AfricanFlightStarАй бұрын

  Excellent, just what I needed to know!

• 
  @DoityourselfwithjoeАй бұрын

  Thank you!

• 
  @CrimsonTideGuyАй бұрын

  I'm going to try this, they want $150 for a 4 burner for Emberglow EG30LP gas grill from the 1990s

• 
  @DoityourselfwithjoeАй бұрын

  I aslo rebuilt the same grill with this kit for under 40 dollars and it works great. amzn.to/3rl8VCU video kzread.info/dash/bejne/m4prtceBc6SqdpM.html

• 
  @CrimsonTideGuyАй бұрын

  @@Doityourselfwithjoe mine looks similar but the burners have curved ends with screens, Thanks I may try this kit. My grill is stainless steel

• 
  @GaelCeballos-ks3quАй бұрын

  This is one of the worst videos of cabinet refinishing that Ive ever seen

• 
  @DoityourselfwithjoeАй бұрын

  It's not refinishing. The cabinets are new and don't have a finish on them. Please tell why it is the worst.