I bought a new Suzuki DF15. Can you advise me what fuel to use? PB95 or PB98?
@przemysaw1247 күн бұрын
Hello I have a brand new Suzuki DF15 AL, what procedures do you recommend to get it in properly because everyone says something different??? Can you advise me how to reach it properly? Hello I mean how to swim for the first 20 hours?
@thecollegequarterdeck2 күн бұрын
Hello! I know this isn't super helpful, but the owners manual should have a detail list of steps for what you should do for breaking in the engine.
@kimdburns19 күн бұрын
This was really fun to watch. My aunt and uncle were the care takers of Camp Cherry Valley in the 70s. They also ran a sea plan and ferry business to Long Beach. They had a pin for javelina hogs, trapped lobster and caught abalone. It's remarkable how familiar it looks even this many years later.
@thecollegequarterdeck14 күн бұрын
That's some pretty awesome family history at Cherry Valley!
@carlosleiva199620 күн бұрын
I got water in the gas tank and the engine shut down. What should I do, it doesn't turn on? It is a Suzuki 20 HP Manual year 2022
@thecollegequarterdeck19 күн бұрын
Id recommend flushing the entire fuel system. You may have to buy a new fuel filter, HP Pump and LP Pump. Id start by removing the hoses and getting as much water out as possible to see if that works. May have to take it to a dealer if you feel that it is outside of your area of expertise. Adding a fuel and water separating filter in your fuel line would be good to help prevent water from making it into the engine.
@GeraldChristensen-uh2ex24 күн бұрын
Liked
@thecollegequarterdeck24 күн бұрын
thanks!
@ClarenceOhare29 күн бұрын
That was cool.
@thecollegequarterdeck28 күн бұрын
Thanks!
@davidbailey681Ай бұрын
Just saved my a$$ when I bit off more than I could chew by taking everything apart first…and…well you can guess how that turned out.
@thecollegequarterdeckАй бұрын
Thats why we make the videos! 🥳
@triplebbb291Ай бұрын
Great job! 👏🏻
@thecollegequarterdeckАй бұрын
thanks!
@justwatching2006Ай бұрын
Our Troop 199 from Redwood City, CA (SF Bay Area) came here in 1990, we had a blast. During our stay i'll never forget the canoe trip a few miles around the island to a private beach that we cooked dinner on and slept on the beach under the stars. Wild boars the size of a refrigerator roamed the beach at night looking for food. A huge pig came right up to my left side of my sleeping bag (of course I was terrified and had the sleeping bag covering my whole head). I'm sure most troops that live afar stop at Disneyland before the island trip and headed back north we stopped at Magic Mountain on the way home.
@thecollegequarterdeckАй бұрын
That sounds like an awesome experience! I only got to canoe to Emerald Bay and then hike back to Cherry Valley. Sleeping under the stars on Catalina must have been beautiful!
@ThamesShips2 ай бұрын
Excellent and interesting video. 👍
@thecollegequarterdeckАй бұрын
Thanks!
@kenh67222 ай бұрын
I changed my oil out and found a copper washer in the bottom of the waste oil, it does not appear to be leaking right now, do you think it will last 2 or 3 days and then I'm going to change the oil again, thoughts?
@thecollegequarterdeck2 ай бұрын
Definitely going to want to get a new washer and put it on.
@kenh67222 ай бұрын
@@thecollegequarterdeck I have the new washer, it fell into the waste oil, I'm just saying that I don't see it leaking anywhere and I think that it will last two days until i change it again
@philipmoss72152 ай бұрын
Do you have a link for the dock bumper used?
@thecollegequarterdeck2 ай бұрын
It was discontinued and so you will have to go to Taylor Made's website and see if there have a product that fits.
@thecollegequarterdeck2 ай бұрын
www.taylormadeproducts.com
@vxxx67832 ай бұрын
Really well-done
@thecollegequarterdeck2 ай бұрын
Thanks!
@filfarmerpacnw48682 ай бұрын
WARNING!!!!!!!!!!!!!!!!! This is an older motor he is working on. I could not find my manual so I added 1.6L of oil. Motor was waaaaaay to full. I had to drain our .5L because the newer motors only hold 1.1L (2021).
@thecollegequarterdeck2 ай бұрын
Yup! You should always check your manual as stated in the video before filling up your outboard as it varies from model to model.
@archer97322 ай бұрын
A good, honest video. Bloopers included with good info. I'm not sure, but it appeared you wrapped the teflon tape in the wrong direction for greatest success. It will work either way if the parts screw together. But sometimes the tape will begin to unwrap while screwing the parts together, a problem that is avoided if the tape is wrapped in the right direction.
@thecollegequarterdeck2 ай бұрын
Yeah, novice move on my part at the time. I completely agree, tape in the correct directions makes life easier 👌🏼
@archer97322 ай бұрын
@@thecollegequarterdeck When I look for advice, I trust a man who can admit to his mistakes. As a result of your video, I found the problem with my system and repaired it. Thanks for a great video.
@thecollegequarterdeck2 ай бұрын
@@archer9732 I appreciate it! Glad you were able to fix your issue!
@erikanderson46053 ай бұрын
Trey WINTERS
@thecollegequarterdeck3 ай бұрын
?
@chipbyrne3 ай бұрын
Nice explanation / demo. Thank you!
@thecollegequarterdeck3 ай бұрын
Anytime!
@sulfeekarali33463 ай бұрын
I need your help regarding troubleshooting of my Suzuki 30hp 4strok OBM
@thecollegequarterdeck3 ай бұрын
I am a bit out of touch since it has been a while from when I last worked on outboards, but fire away.
@ship3173 ай бұрын
Great video, very helpful. Thank you!!!
@thecollegequarterdeck3 ай бұрын
You're welcome!
@donc23343 ай бұрын
Very informative! Do you or anyone else here know the approximate fuel pressure for a DF9.9-Df20 EFI? I want to install a fuel pressure gauge into the fuel line and wonder what guage range I should get...thanks!
@thecollegequarterdeck3 ай бұрын
I do not at the moment, sorry!
@AhmadsaidRahareng3 ай бұрын
Bisa bahasa indonesia
@thecollegequarterdeck3 ай бұрын
Hello
@alannahardin55684 ай бұрын
Awesome video!!!! Would have been better with more shots of me but still good work !
@thecollegequarterdeck4 ай бұрын
You should have asked to be in our rotation 🥲
@thecollegequarterdeck4 ай бұрын
Thanks you're watching! Feel free to let me know if you have any other cruise moments you would like me to share. Thank you for all your support, for liking this video, and subscribing!
@williamm.36124 ай бұрын
Hey Brotha, are you deck/ Engine? Im taking a close eye at Cal Mar. Do you know any older students 30+? Any off Campus liveaboards in nearby marinas?
@thecollegequarterdeck4 ай бұрын
Im deck, there are students who are 30 or older. I'm 26 and started at CMA at 24 yrs old. I do know there is 1 student who's a liveaboard in the Vallejo marina i believe. I dont know the details but I know he exists. It may be beneficial to spend to first year on campus that way you get to meet people even if you are older. Usually they put all the older students/transfer students in a residence hall together. Thats how a met a good amount of friends my 1st year at CMA :) Let me know if you have any other questions!
@alannahardin55684 ай бұрын
Great video Chris!! The girl in the blue bikini has some serious shooting skills
@thecollegequarterdeck4 ай бұрын
She's a sharpshooter for sure! Public enemy #1
@thecollegequarterdeck4 ай бұрын
Thanks for dropping by! Feel free to like and subscribe if you want to see more content like this!
@user-tc6kr7pv8g4 ай бұрын
I have a 2019 15 hp Suzuki. Running great yesterday for about 20 minutes and then just died and will not re-start. I watched your videos and then looked at my engine. Did they change the engine such that it lowers the injector and fuel pump bolts below the upper cowling level? Is there a way to get to the bolts?
@thecollegequarterdeck4 ай бұрын
I am unsure since I have not worked with the 2019 model. The nice part about the 2016-2017 model was that the lower cowling comes off with ease to access those lower components if needed.
@user-tc6kr7pv8g4 ай бұрын
@@thecollegequarterdeck I realized that after I posted the comment and was successful in removing the lower cowling and getting to the components. We removed the hose before the pump and we are getting gas to that point. So disassembled and cleaned the components in the pump. It is a manual start, so with one person holding the hose from the injector side of the pump in a bucket and the other pulling the started several times we are not getting flow. We tried checking voltage on all combinations of the plug and one of the combinations causes the meter to zero out(checking DC voltage). Would this indicate the pump is bad? Thanks in advance. We are in the Bahamas, so trying to find someone qualified and getting access to parts will be interesting! Bill Wells
@American_24 ай бұрын
Going to mass maritime...
@thecollegequarterdeck4 ай бұрын
Have fun! Best of luck! 🫡
@quoteofDaday4 ай бұрын
I was planning to work for 3 months in catalina.
@thecollegequarterdeck4 ай бұрын
Sounds like a good opportunity!
@fishingwithhonor25205 ай бұрын
Nice video and thank you for sharing. I'm trying to find out what's the problem with my tank... it get sucked in and looks like I'm having fuel restriction.🐟🪝🎣
@thecollegequarterdeck5 ай бұрын
Is the vent open on top of the tank? That way air can flow in and out, allowing the pressure in the tank to equalize.
@LeandroTrancosoPonciano5 ай бұрын
Ótimo vídeo
@thecollegequarterdeck5 ай бұрын
Thank you! We appreciate it!
@thecollegequarterdeck5 ай бұрын
Hey! Hopefully you enjoyed this moment captured at the Cal Maritime Waterfront! Feel free to help support this channel if you like content like this by liking, subscribing and sharing this video!
@Traderjoe5 ай бұрын
Really a fantastic demonstration! Well done!
@thecollegequarterdeck5 ай бұрын
Thank you!
@ravrav875 ай бұрын
how much oil should be poured into the engine?
@thecollegequarterdeck5 ай бұрын
It will say it in your owners manual, but if you dont have your owners manual, you can open the cowling and it should state on the engine how much oil and what type. You can also look up the owners manual online, just make sure its the correct year and model.
@ravrav875 ай бұрын
@@thecollegequarterdeck I have the same engine as in the video, Yamaha F25D et 2015, I saw the information in the video that it was 1.6l, thank you
@justinstewart32486 ай бұрын
Do you have a link to that oil filter wrench?
@thecollegequarterdeck6 ай бұрын
Yes, the link in the description of the video should work. If it doesn't, let me know!
@daveg50426 ай бұрын
Nice video! Thank you for sharing!
@thecollegequarterdeck6 ай бұрын
Thanks for watching! :)
@remirambo20906 ай бұрын
Did you fit it or not. I had same problem today going to try this
@thecollegequarterdeck6 ай бұрын
Which part?
@wendylouttit69246 ай бұрын
Great video showing the amount of time and effort needed to keep the fleet afloat!
@thecollegequarterdeck6 ай бұрын
Yes, we need to do this more often to catch up on all the work! 😮💨
@djboyn6 ай бұрын
Just got accepted here I got a lot of options on the table but this looks too good to pass up
@thecollegequarterdeck6 ай бұрын
If you're in a licensed track for engine or deck, it really is an amazing experience! I can't wait for senior cruise 🚢
@muggleworm7 ай бұрын
hope the guy that fell was ok
@thecollegequarterdeck7 ай бұрын
Hes doing well :)
@paulinemercer5388 ай бұрын
First class tuition 🏴👍👍👍
@thecollegequarterdeck8 ай бұрын
Thanks! I think :)
@loganchapman19688 ай бұрын
ROOTBEER NOOO
@thecollegequarterdeck8 ай бұрын
I wish i had a video of you saving that turtled FJ 😭😂
@seanpruitt68018 ай бұрын
This makes me excited for maritime academy. I’m sure it’s tough work but rewarding work.
@thecollegequarterdeck8 ай бұрын
It really is! Which maritime academy are you going to?
@seanpruitt68018 ай бұрын
@@thecollegequarterdeck i just put my application in to California maritime! I’m also going to put my application into A&M Galveston but Cal maritime seems to be the best option for me.
@thecollegequarterdeck8 ай бұрын
@@seanpruitt6801 Haha go to CMA :P
@BlayneBenoit9 ай бұрын
Such a great video
@thecollegequarterdeck9 ай бұрын
Thank Blayne and also for your help capturing moments during arrival into Hilo and during the Sinbad Games 💙☺️
@jayrico959 ай бұрын
Do Yamaha 8hp have oil filters?
@thecollegequarterdeck9 ай бұрын
Usually they have oil strainers which are hard to get to and remove so people usually dont swap it. Its similar to the 4HP video we made. :)
@rileydoolittle53249 ай бұрын
Memories forever ❤
@thecollegequarterdeck9 ай бұрын
Fr! Thats why I do it 🥳🥹
@dallasharrelson64769 ай бұрын
Good riddance… just kidding that was fun
@thecollegequarterdeck9 ай бұрын
You know you loved it 👀💙
@jacobmin50039 ай бұрын
sick af
@thecollegequarterdeck9 ай бұрын
That plank was pretty 🔥🔥🔥
@ShaneSimpson19 ай бұрын
Baller Video!
@thecollegequarterdeck9 ай бұрын
Thank you Shane! I appreciate your help capturing the engine side of things!
@jasphercendana49479 ай бұрын
Very very very nice Chris!
@thecollegequarterdeck9 ай бұрын
That shot of you in Samoa with the light shining on you as people throw water at you... 🔥🔥🔥
Пікірлер
I bought a new Suzuki DF15. Can you advise me what fuel to use? PB95 or PB98?
Hello I have a brand new Suzuki DF15 AL, what procedures do you recommend to get it in properly because everyone says something different??? Can you advise me how to reach it properly? Hello I mean how to swim for the first 20 hours?
Hello! I know this isn't super helpful, but the owners manual should have a detail list of steps for what you should do for breaking in the engine.
This was really fun to watch. My aunt and uncle were the care takers of Camp Cherry Valley in the 70s. They also ran a sea plan and ferry business to Long Beach. They had a pin for javelina hogs, trapped lobster and caught abalone. It's remarkable how familiar it looks even this many years later.
That's some pretty awesome family history at Cherry Valley!
I got water in the gas tank and the engine shut down. What should I do, it doesn't turn on? It is a Suzuki 20 HP Manual year 2022
Id recommend flushing the entire fuel system. You may have to buy a new fuel filter, HP Pump and LP Pump. Id start by removing the hoses and getting as much water out as possible to see if that works. May have to take it to a dealer if you feel that it is outside of your area of expertise. Adding a fuel and water separating filter in your fuel line would be good to help prevent water from making it into the engine.
Liked
thanks!
That was cool.
Thanks!
Just saved my a$$ when I bit off more than I could chew by taking everything apart first…and…well you can guess how that turned out.
Thats why we make the videos! 🥳
Great job! 👏🏻
thanks!
Our Troop 199 from Redwood City, CA (SF Bay Area) came here in 1990, we had a blast. During our stay i'll never forget the canoe trip a few miles around the island to a private beach that we cooked dinner on and slept on the beach under the stars. Wild boars the size of a refrigerator roamed the beach at night looking for food. A huge pig came right up to my left side of my sleeping bag (of course I was terrified and had the sleeping bag covering my whole head). I'm sure most troops that live afar stop at Disneyland before the island trip and headed back north we stopped at Magic Mountain on the way home.
That sounds like an awesome experience! I only got to canoe to Emerald Bay and then hike back to Cherry Valley. Sleeping under the stars on Catalina must have been beautiful!
Excellent and interesting video. 👍
Thanks!
I changed my oil out and found a copper washer in the bottom of the waste oil, it does not appear to be leaking right now, do you think it will last 2 or 3 days and then I'm going to change the oil again, thoughts?
Definitely going to want to get a new washer and put it on.
@@thecollegequarterdeck I have the new washer, it fell into the waste oil, I'm just saying that I don't see it leaking anywhere and I think that it will last two days until i change it again
Do you have a link for the dock bumper used?
It was discontinued and so you will have to go to Taylor Made's website and see if there have a product that fits.
www.taylormadeproducts.com
Really well-done
Thanks!
WARNING!!!!!!!!!!!!!!!!! This is an older motor he is working on. I could not find my manual so I added 1.6L of oil. Motor was waaaaaay to full. I had to drain our .5L because the newer motors only hold 1.1L (2021).
Yup! You should always check your manual as stated in the video before filling up your outboard as it varies from model to model.
A good, honest video. Bloopers included with good info. I'm not sure, but it appeared you wrapped the teflon tape in the wrong direction for greatest success. It will work either way if the parts screw together. But sometimes the tape will begin to unwrap while screwing the parts together, a problem that is avoided if the tape is wrapped in the right direction.
Yeah, novice move on my part at the time. I completely agree, tape in the correct directions makes life easier 👌🏼
@@thecollegequarterdeck When I look for advice, I trust a man who can admit to his mistakes. As a result of your video, I found the problem with my system and repaired it. Thanks for a great video.
@@archer9732 I appreciate it! Glad you were able to fix your issue!
Trey WINTERS
?
Nice explanation / demo. Thank you!
Anytime!
I need your help regarding troubleshooting of my Suzuki 30hp 4strok OBM
I am a bit out of touch since it has been a while from when I last worked on outboards, but fire away.
Great video, very helpful. Thank you!!!
You're welcome!
Very informative! Do you or anyone else here know the approximate fuel pressure for a DF9.9-Df20 EFI? I want to install a fuel pressure gauge into the fuel line and wonder what guage range I should get...thanks!
I do not at the moment, sorry!
Bisa bahasa indonesia
Hello
Awesome video!!!! Would have been better with more shots of me but still good work !
You should have asked to be in our rotation 🥲
Thanks you're watching! Feel free to let me know if you have any other cruise moments you would like me to share. Thank you for all your support, for liking this video, and subscribing!
Hey Brotha, are you deck/ Engine? Im taking a close eye at Cal Mar. Do you know any older students 30+? Any off Campus liveaboards in nearby marinas?
Im deck, there are students who are 30 or older. I'm 26 and started at CMA at 24 yrs old. I do know there is 1 student who's a liveaboard in the Vallejo marina i believe. I dont know the details but I know he exists. It may be beneficial to spend to first year on campus that way you get to meet people even if you are older. Usually they put all the older students/transfer students in a residence hall together. Thats how a met a good amount of friends my 1st year at CMA :) Let me know if you have any other questions!
Great video Chris!! The girl in the blue bikini has some serious shooting skills
She's a sharpshooter for sure! Public enemy #1
Thanks for dropping by! Feel free to like and subscribe if you want to see more content like this!
I have a 2019 15 hp Suzuki. Running great yesterday for about 20 minutes and then just died and will not re-start. I watched your videos and then looked at my engine. Did they change the engine such that it lowers the injector and fuel pump bolts below the upper cowling level? Is there a way to get to the bolts?
I am unsure since I have not worked with the 2019 model. The nice part about the 2016-2017 model was that the lower cowling comes off with ease to access those lower components if needed.
@@thecollegequarterdeck I realized that after I posted the comment and was successful in removing the lower cowling and getting to the components. We removed the hose before the pump and we are getting gas to that point. So disassembled and cleaned the components in the pump. It is a manual start, so with one person holding the hose from the injector side of the pump in a bucket and the other pulling the started several times we are not getting flow. We tried checking voltage on all combinations of the plug and one of the combinations causes the meter to zero out(checking DC voltage). Would this indicate the pump is bad? Thanks in advance. We are in the Bahamas, so trying to find someone qualified and getting access to parts will be interesting! Bill Wells
Going to mass maritime...
Have fun! Best of luck! 🫡
I was planning to work for 3 months in catalina.
Sounds like a good opportunity!
Nice video and thank you for sharing. I'm trying to find out what's the problem with my tank... it get sucked in and looks like I'm having fuel restriction.🐟🪝🎣
Is the vent open on top of the tank? That way air can flow in and out, allowing the pressure in the tank to equalize.
Ótimo vídeo
Thank you! We appreciate it!
Hey! Hopefully you enjoyed this moment captured at the Cal Maritime Waterfront! Feel free to help support this channel if you like content like this by liking, subscribing and sharing this video!
Really a fantastic demonstration! Well done!
Thank you!
how much oil should be poured into the engine?
It will say it in your owners manual, but if you dont have your owners manual, you can open the cowling and it should state on the engine how much oil and what type. You can also look up the owners manual online, just make sure its the correct year and model.
@@thecollegequarterdeck I have the same engine as in the video, Yamaha F25D et 2015, I saw the information in the video that it was 1.6l, thank you
Do you have a link to that oil filter wrench?
Yes, the link in the description of the video should work. If it doesn't, let me know!
Nice video! Thank you for sharing!
Thanks for watching! :)
Did you fit it or not. I had same problem today going to try this
Which part?
Great video showing the amount of time and effort needed to keep the fleet afloat!
Yes, we need to do this more often to catch up on all the work! 😮💨
Just got accepted here I got a lot of options on the table but this looks too good to pass up
If you're in a licensed track for engine or deck, it really is an amazing experience! I can't wait for senior cruise 🚢
hope the guy that fell was ok
Hes doing well :)
First class tuition 🏴👍👍👍
Thanks! I think :)
ROOTBEER NOOO
I wish i had a video of you saving that turtled FJ 😭😂
This makes me excited for maritime academy. I’m sure it’s tough work but rewarding work.
It really is! Which maritime academy are you going to?
@@thecollegequarterdeck i just put my application in to California maritime! I’m also going to put my application into A&M Galveston but Cal maritime seems to be the best option for me.
@@seanpruitt6801 Haha go to CMA :P
Such a great video
Thank Blayne and also for your help capturing moments during arrival into Hilo and during the Sinbad Games 💙☺️
Do Yamaha 8hp have oil filters?
Usually they have oil strainers which are hard to get to and remove so people usually dont swap it. Its similar to the 4HP video we made. :)
Memories forever ❤
Fr! Thats why I do it 🥳🥹
Good riddance… just kidding that was fun
You know you loved it 👀💙
sick af
That plank was pretty 🔥🔥🔥
Baller Video!
Thank you Shane! I appreciate your help capturing the engine side of things!
Very very very nice Chris!
That shot of you in Samoa with the light shining on you as people throw water at you... 🔥🔥🔥