I feel stupid for asking on an earlier video if you were inspired by the fractal north case. Its obvious your skill in woodworking goes way back. It's really commendable that you're multi talented in things. This is art. You know what would be cool, is if you made a case that looks like an item thats usually made of wood in the first place. Like a piano, a boat, a building, something like that.
@BRUMMS14 сағат бұрын
Nice Build!. Most Aussie thing ever Thongs & Power Tools.
@yuan.pingchen305617 сағат бұрын
lack of dust filtering solution, but I think that's not important to you...
@WesTECH18 сағат бұрын
I love this. I hope this become the new theme in 2025. DM your favorite brands to do the same.
@TheSintal1tyКүн бұрын
"This is straight flames!"
@MPoe56Күн бұрын
Your work is amazing. I would definitely buy one that has panels that are already pre-made. So when it got to my front door, I could assemble. Also, because I don't have/afford all the required machines to make such beauty, I have to buy if available for purchase.
@businessuser86402 күн бұрын
Holy crap, impressive.
@mxcbuilds66332 күн бұрын
Thanks!
@jaconiassousa2 күн бұрын
Onde compra?
@mxcbuilds66332 күн бұрын
Sorry not for sale
@SigmaMaleEdits2 күн бұрын
18:00 it doesn't, in my opinion, the combination of 3d printed black pieces with the wood doesn't seem quite right, don't get me wrong tho, the build is really nice with a lot of details sorted out, but as someone with severe OCD, it doesn't look quite good, i would 3d model everything and send the models out to a machining shop to mill them out of stainless steel and after that anodize all of them or simply powder paint them.
@mxcbuilds6633Күн бұрын
Thanks for the feedback. That strategy would certainly yield even greater parts. I probably wouldn't invest that much into those plugs specifically as by that stage it would be cheaper just to buy the black ones from EK. However, in saying that, I do acknowledge that the print quality on those wasn't the best. I was using a rather old and cheap printer and have since upgraded. We should be seeing much better quality on the printed parts moving forward.
@studio_beasty2 күн бұрын
Love the black card idea
@lapvago822 күн бұрын
Very neat look, The only thing I dont like, is some of the 3D printed parts look a bit ugly, where I suppose support material had been used. I would do some kind of filling to hide that and match the quality of the rest of the build. Im talking about things like at 26:21. The rest is flawless.
@mxcbuilds6633Күн бұрын
For sure some of those printed parts leave much to be desired. Was using a rather old cheap printer. Have since upgraded and we should be getting much better quality in parts moving forward :) thanks for the constructive feedback
@spartameister35652 күн бұрын
Great build, needs more Noctua
@RadimPinkava2 күн бұрын
Looks cool.
@kishirisu12682 күн бұрын
Looks like box you can found on your grandma attic. Is it the best case you are managed to make? Such a concentration of tasteless “vintage” parts, my eyes really hurts seeing such thing. Did you ever read something about design? At least watch 5 min videos about proportions.
@mxcbuilds66332 күн бұрын
No problem, thanks for your feedback 🙂
@saltee_crcker23633 күн бұрын
you built not only a pc but an art piece 💯
@lawrenceyu93823 күн бұрын
I also made a wooden ITX case by myself, really fun to play with
@mxcbuilds66332 күн бұрын
Indeed it is!
@NaurCal3 күн бұрын
Just a casual "Mainframe" thrown in there for nostalgia. Lol
@ashermcgonagle55553 күн бұрын
Now this is a work of art!
@billybunt3 күн бұрын
Amazing Build !
@user-uy2mh6pq5b3 күн бұрын
my god what an epic build thanks for sharing.
4 күн бұрын
Beautiful. Absolutely beautiful.
@jplayzgames_4 күн бұрын
Seriously incredible work. I stumbled across this video but I'm glad i did. GG dude
@jzarlenn4 күн бұрын
Do you have set plans/ templates for this build? I am now a fan!!! Subbed! BTW, are you a Filipino?
@CryptoHP4 күн бұрын
a masterpiece
@mxcbuilds66334 күн бұрын
Thanks!
@iOSAddict20134 күн бұрын
What the name of the wood you use ?
@mxcbuilds66334 күн бұрын
Thermo oak
@NorseBlade4 күн бұрын
You really covered everything. From minor aesthetic details to diagnostic implementations, this is a truly complete build. I also love the tips along the way that make life easier such as the tools and methods you used for certain parts as well as using air to test the water cooling system.
@mxcbuilds66334 күн бұрын
Glad you enjoyed it!
@ChristophRizzotti4 күн бұрын
Wow.. What da great work.. Thanks for sharing!
@mxcbuilds66334 күн бұрын
Thank you! Cheers!
@orlandolando63265 күн бұрын
Amazing build
@mxcbuilds66334 күн бұрын
Thank you!
@kamilkachnic73605 күн бұрын
You are smart 😮
@mxcbuilds66334 күн бұрын
Cheers
@lenghia55385 күн бұрын
It's like a art for ocd people like me
@mxcbuilds66334 күн бұрын
Thanks!
@Fifth_476 күн бұрын
Very Noice
@mxcbuilds66334 күн бұрын
Thanks!
@sporadicentertainment92536 күн бұрын
PC helped me with my Panic Attack Disorder.
@mxcbuilds66334 күн бұрын
I'm glad
@julienredfox74896 күн бұрын
Wow wow wow!!! Amazing job! You're an artist!
@mxcbuilds66334 күн бұрын
Thank you!
@dorego36586 күн бұрын
IEC connector?
@mxcbuilds66334 күн бұрын
Wrong name?
@MichaelAlhilly6 күн бұрын
Ah yes. Love when tech and art merge so well.
@mxcbuilds66334 күн бұрын
Thanks!
@Chopin036 күн бұрын
Holy shit...
@mxcbuilds66334 күн бұрын
Indeed
@danodynamo6 күн бұрын
My god thats a thing of beauty!!!
@mxcbuilds66336 күн бұрын
Thanks!
@rajvinjamuri77 күн бұрын
Do you take commissions?
@mxcbuilds66336 күн бұрын
Not currently sorry
@OrionLaerithryn7 күн бұрын
Wow!!! Amazing build! Gorgeous PC! You are indeed a true artist and PC-building beast! I love that you are meticulous throughout the entirety of the build. I applaud you, sir!
@mxcbuilds66336 күн бұрын
Thank you very much!
@teenyson29397 күн бұрын
That was incredible. I did not expect that. Just amazing workmanship.
@mxcbuilds66336 күн бұрын
Thank you!
@BradK027 күн бұрын
Wow, this is next level.
@mxcbuilds66336 күн бұрын
Thanks!
@F...........................7 күн бұрын
respect for their work. the case looks really awesome. Nevertheless, I would always prefer a metal case. Wood stores heat, so the principle will never work as well as with a metal case.
@mxcbuilds66337 күн бұрын
Thank you
@user-hm9tv9gb4m8 күн бұрын
what a perfect build
@mxcbuilds66337 күн бұрын
Thank you!
@ElderSwamp8 күн бұрын
Amazing dedication and skills!! 🏵️👏
@mxcbuilds66337 күн бұрын
Thank you! Cheers!
@CoolGameKanaal8 күн бұрын
gfj
@8bithavok8 күн бұрын
sir you need a better keyboard.
@mxcbuilds66337 күн бұрын
Haha that is actually one I borrowed from work just for the noise test set up. So was the monitor 😅
@user-bz8sg8yk2g8 күн бұрын
its beautiful but you could have gotten the i9 13900k
@mxcbuilds66337 күн бұрын
Might as well the 14900k then? Nah the 12700k is more than enough for me now
@user-bz8sg8yk2g7 күн бұрын
@@mxcbuilds6633 ok. im nott forcing you. i just never seen a 4090 with a 12700k.
@KarlGutowski8 күн бұрын
@19:22 Even the wood grain direction on all 3 water block screw covers is in the same direction.👍 I do grade your homework.
@mxcbuilds66337 күн бұрын
Thanks!
@Hicksy00018 күн бұрын
This system is beautiful. Hiding all the cables turns this into an ornament for display even more than custom PCs already were. Well done sir
@mxcbuilds66337 күн бұрын
Thank you!
@ImClaux8 күн бұрын
I found this when I was searching reviews on the asus ProArt mouse. Damn this is such a nice build with a beautiful result. Good luck in the creator space!
Пікірлер
I feel stupid for asking on an earlier video if you were inspired by the fractal north case. Its obvious your skill in woodworking goes way back. It's really commendable that you're multi talented in things. This is art. You know what would be cool, is if you made a case that looks like an item thats usually made of wood in the first place. Like a piano, a boat, a building, something like that.
Nice Build!. Most Aussie thing ever Thongs & Power Tools.
lack of dust filtering solution, but I think that's not important to you...
I love this. I hope this become the new theme in 2025. DM your favorite brands to do the same.
"This is straight flames!"
Your work is amazing. I would definitely buy one that has panels that are already pre-made. So when it got to my front door, I could assemble. Also, because I don't have/afford all the required machines to make such beauty, I have to buy if available for purchase.
Holy crap, impressive.
Thanks!
Onde compra?
Sorry not for sale
18:00 it doesn't, in my opinion, the combination of 3d printed black pieces with the wood doesn't seem quite right, don't get me wrong tho, the build is really nice with a lot of details sorted out, but as someone with severe OCD, it doesn't look quite good, i would 3d model everything and send the models out to a machining shop to mill them out of stainless steel and after that anodize all of them or simply powder paint them.
Thanks for the feedback. That strategy would certainly yield even greater parts. I probably wouldn't invest that much into those plugs specifically as by that stage it would be cheaper just to buy the black ones from EK. However, in saying that, I do acknowledge that the print quality on those wasn't the best. I was using a rather old and cheap printer and have since upgraded. We should be seeing much better quality on the printed parts moving forward.
Love the black card idea
Very neat look, The only thing I dont like, is some of the 3D printed parts look a bit ugly, where I suppose support material had been used. I would do some kind of filling to hide that and match the quality of the rest of the build. Im talking about things like at 26:21. The rest is flawless.
For sure some of those printed parts leave much to be desired. Was using a rather old cheap printer. Have since upgraded and we should be getting much better quality in parts moving forward :) thanks for the constructive feedback
Great build, needs more Noctua
Looks cool.
Looks like box you can found on your grandma attic. Is it the best case you are managed to make? Such a concentration of tasteless “vintage” parts, my eyes really hurts seeing such thing. Did you ever read something about design? At least watch 5 min videos about proportions.
No problem, thanks for your feedback 🙂
you built not only a pc but an art piece 💯
I also made a wooden ITX case by myself, really fun to play with
Indeed it is!
Just a casual "Mainframe" thrown in there for nostalgia. Lol
Now this is a work of art!
Amazing Build !
my god what an epic build thanks for sharing.
Beautiful. Absolutely beautiful.
Seriously incredible work. I stumbled across this video but I'm glad i did. GG dude
Do you have set plans/ templates for this build? I am now a fan!!! Subbed! BTW, are you a Filipino?
a masterpiece
Thanks!
What the name of the wood you use ?
Thermo oak
You really covered everything. From minor aesthetic details to diagnostic implementations, this is a truly complete build. I also love the tips along the way that make life easier such as the tools and methods you used for certain parts as well as using air to test the water cooling system.
Glad you enjoyed it!
Wow.. What da great work.. Thanks for sharing!
Thank you! Cheers!
Amazing build
Thank you!
You are smart 😮
Cheers
It's like a art for ocd people like me
Thanks!
Very Noice
Thanks!
PC helped me with my Panic Attack Disorder.
I'm glad
Wow wow wow!!! Amazing job! You're an artist!
Thank you!
IEC connector?
Wrong name?
Ah yes. Love when tech and art merge so well.
Thanks!
Holy shit...
Indeed
My god thats a thing of beauty!!!
Thanks!
Do you take commissions?
Not currently sorry
Wow!!! Amazing build! Gorgeous PC! You are indeed a true artist and PC-building beast! I love that you are meticulous throughout the entirety of the build. I applaud you, sir!
Thank you very much!
That was incredible. I did not expect that. Just amazing workmanship.
Thank you!
Wow, this is next level.
Thanks!
respect for their work. the case looks really awesome. Nevertheless, I would always prefer a metal case. Wood stores heat, so the principle will never work as well as with a metal case.
Thank you
what a perfect build
Thank you!
Amazing dedication and skills!! 🏵️👏
Thank you! Cheers!
gfj
sir you need a better keyboard.
Haha that is actually one I borrowed from work just for the noise test set up. So was the monitor 😅
its beautiful but you could have gotten the i9 13900k
Might as well the 14900k then? Nah the 12700k is more than enough for me now
@@mxcbuilds6633 ok. im nott forcing you. i just never seen a 4090 with a 12700k.
@19:22 Even the wood grain direction on all 3 water block screw covers is in the same direction.👍 I do grade your homework.
Thanks!
This system is beautiful. Hiding all the cables turns this into an ornament for display even more than custom PCs already were. Well done sir
Thank you!
I found this when I was searching reviews on the asus ProArt mouse. Damn this is such a nice build with a beautiful result. Good luck in the creator space!
Glad you liked it, thanks for watching!