It's funny......I've never done anything to my Honda engine for Winter storage, like gas preserver or anything.....and in the Spring it starts halfway through the first pull every time. Honda makes a magnificent lawnmower engine.
@jaymetantillo8834 күн бұрын
I turn the head and it clicks to wrap up but how do you go the other way when to line wears down and you need more slack? Mine only clicks one way and sucks the line in
@keeganackley388110 күн бұрын
What does it mean if the chain doesn’t move freely after tensioning
@karine159911 күн бұрын
i really think it is overated. i've bought it and returned it after a few days. it needing almost daily fixes! It's supposed to cover 0.4 acres as it claimed, but even for my small 2000 sq ft lawn, it needed to run 4 hours daily. To cover 0.4 acres, it would have to be mowing and charging non-stop, with about 10 cycles a day. and the biggest issue is the erratic self-docking system. Even with proper setup of the boundary and guide wires, the mower rarely docks correctly more than three times in a row. Sometimes it docks but fails to charge. I tried multiple docking setups but couldn't get reliable results. I gave it a fair trial, seeking help from Facebook groups and Reddit forums. After much effort, I managed to get it to run four charge and mow cycles without supervision. However, on the fifth cycle, it docked but didn't start charging.
@wahasavolf25149 күн бұрын
I think you can try the buried wire mower robot, you only need to spend a few hours in the first place to lay out the line, in the later you don't need to worry about it running problems! I bought anthbot, a lawn-mowing robot, which I set up in the first few hours and then controlled from my phone. Not only does it not mess up my lawn, it doesn't stop working due to lack of gps!! By the way, if the thread you bury is accidentally broken, it can also show the exact position on the app
@mkim569212 күн бұрын
The line is too curly for me to align into the slots. Some other youtuber said you could straighten it out with hot water.
@amandabear660512 күн бұрын
Very helpful, thank you! Where can I get some of those gloves tho?!? 😂
@PIWarp13 күн бұрын
Matthew same here! Just got it on sale at Lowe’s and I brought it home and filled it up with the Husqavarna fuel and still can’t get it started for the first time
@glennsarka439113 күн бұрын
You need to hire a team to straighten out your instructions. So far very disappointed in husqvarna. Communication on sales was just as bad.
@glennsarka439113 күн бұрын
The fact that there has to be a video demonstrates how awful the paper instructions are. Does husqvarna test thie before they send it out?
@biankamehi426613 күн бұрын
When will this be available in Austria?
@trilladave14 күн бұрын
i wanted to like this video again but i couldn't, so here i am.
@thomasscharton129916 күн бұрын
When you're taking into account the canopy and doing the plumb line calculations, is it correct to assume that trimming off limbs (changing the width of the canopy) changes the plumb line? It seems obvious it must, but sometimes my intuition is off. No, I never took physics, so I found this video to be a great help -- not just eyeballing cuts (like most of the videos posted.)
@Morris-wd5cu20 күн бұрын
Thanks
@danmillercrna20 күн бұрын
Thanks for the video. Incredulously the manual that comes with the 330LK does not tell what size line to use but you did. 0.95
@sirvozelo122 күн бұрын
How long the battery last in a single charge? In my Stihl MSA300 with an 18" bar cutting 20" diameter oak logs 11 cuts and the Stihl top battery is out of power.
@hockeystud8523 күн бұрын
He came to my school today!
@ChristianLegoFan124 күн бұрын
That action figure looks like it's a slightly modified and painted Iron Man Marvel Legends figure
@cjp869926 күн бұрын
That chick looks like she's been slowly taking a crap in her pants the whole time! LOL
@Dianagott27 күн бұрын
Very helpful thank you greatly
@commercial0929 күн бұрын
Total crap equipment!!
@patrickmoore842829 күн бұрын
How to fit a chain catcher. My saw never had a chain catcher. I have bought a catcher but there are no instructions.
@marlinderwall887329 күн бұрын
I'm glad they gave this homeless man a job. ❤
@AldodragonАй бұрын
“Ask your supervisor if you have questions” what if I’m mowing my own lawn, do I need to have a supervisor to mow my own lawn?
@devonstransnick4434Ай бұрын
O I’m j7, c
@trevorwylie5882Ай бұрын
Just had a KZread nonskipable advert for a robot stihl I have it screen shot.
@BenjaminThornton-qg8zmАй бұрын
“Adjust as needed” wow! I wish I would’ve thought of that! How, exactly, am I supposed to measure the blade height on the side that doesn’t have a discharge chute?!?
@cornbreaddiabetic4615Ай бұрын
Aren't these made in China? I bought a Chinese knockoff half the price it's identical
@larryhutchens7593Ай бұрын
No one in the state of Oklahoma seems to have that tool, what the hell is the deal? Is this damn thing built in Europe?
@larryhutchens7593Ай бұрын
Hey there lumberjack, really neat idea there and it looks like it works really well but one problem, where the hell does one get that tool?
@petersack5074Ай бұрын
7:40 Time. One, could also use the 3 gill method, on this far right example. 3 vertical slits, 1 from the front-cut face, above the hinge, 2nd one higher, 1.5 inches to its left ; 3 rd one, same. Expands, the hinge, vertically as well. 2 nd and 3 rd ones, bottom meets top of other one. Progressive ; for LARGE trees.
@playamade6178Ай бұрын
This Bull💩
@billz410Ай бұрын
Thank you for a truly worthless video, Husqvarna.,
@matthewanderson2002Ай бұрын
Unfortunately I buy a new one and cannot get it to start at all. Thinking gonna have to take into a shop
@williammurray7499Ай бұрын
Need (shade)
@OutdoorswithJRonnieАй бұрын
Hey guys, quick question, i just bought a 122 LK trimmer, will i blow my gear head if i take the Guard off? (I’m not commercial just have a small business)
@TheSuperDerpАй бұрын
Thanks for nothing
@jorgeantoniocoellopenagos1797Ай бұрын
Qué precio tiene?
@TheFdoamigoАй бұрын
Me gusto el diseño de la maquina!! Que modelo es?
@Lukechavez2977Ай бұрын
Yo tengo una 130C,el motor enciende pero la parte de arriba no funciona???y no corta ?hay alguien que me pueda decir.gracias
@davidcovelli8482Ай бұрын
I once received said serious injuries or damage from one of these bad boys before. Still works a dream though
@kevinlaflamme9691Ай бұрын
Ben deserves 👏 a 50% increase 👏 in pay 👏 thank you very much i love my trimmer it was just a matter of love putting line in my trimmer thanks to Ben he made it possible 👍
@kexiaАй бұрын
Great mower but just you know the accessories will cost you an arm and a leg.
@TommyRobertMusicАй бұрын
Hope the hydro arms last more the 100 hours,, yall better be ready. You will not screw me over. My shit better work lol. Just bought the MZ48, paid a pretty penny. Hope it lasts
@PonderingOneАй бұрын
3:44 What is the height selection for this part of the video? I got my blade set to 2-7/8” while my selector is at 3”, but there’s no more thread left on the side adjusters. When I move to 4” selection, the blade is around 3-1/4”, and at the 5” setting it is at 3-1/2”. Thanks for any help.
@ddcsr31Ай бұрын
Re spooled like a charm
@sabrinaricks4032Ай бұрын
What size socket to take off the bolt
@ryang256Ай бұрын
Wow... what a major waste of time. This is how to check the chain, NOT how to lubricate it as the video title states.
@jimbaird8985Ай бұрын
a lifesaver!! thanks!
@sparklawns3433Ай бұрын
Love my husky mark 3 blowers and string trimmers. Chainsaw is mid but it was the lowes special, the higher end ones have plenty of power for what I need. Looking forward to this mower
Пікірлер
When is this going to be released in the USA??
It's funny......I've never done anything to my Honda engine for Winter storage, like gas preserver or anything.....and in the Spring it starts halfway through the first pull every time. Honda makes a magnificent lawnmower engine.
I turn the head and it clicks to wrap up but how do you go the other way when to line wears down and you need more slack? Mine only clicks one way and sucks the line in
What does it mean if the chain doesn’t move freely after tensioning
i really think it is overated. i've bought it and returned it after a few days. it needing almost daily fixes! It's supposed to cover 0.4 acres as it claimed, but even for my small 2000 sq ft lawn, it needed to run 4 hours daily. To cover 0.4 acres, it would have to be mowing and charging non-stop, with about 10 cycles a day. and the biggest issue is the erratic self-docking system. Even with proper setup of the boundary and guide wires, the mower rarely docks correctly more than three times in a row. Sometimes it docks but fails to charge. I tried multiple docking setups but couldn't get reliable results. I gave it a fair trial, seeking help from Facebook groups and Reddit forums. After much effort, I managed to get it to run four charge and mow cycles without supervision. However, on the fifth cycle, it docked but didn't start charging.
I think you can try the buried wire mower robot, you only need to spend a few hours in the first place to lay out the line, in the later you don't need to worry about it running problems! I bought anthbot, a lawn-mowing robot, which I set up in the first few hours and then controlled from my phone. Not only does it not mess up my lawn, it doesn't stop working due to lack of gps!! By the way, if the thread you bury is accidentally broken, it can also show the exact position on the app
The line is too curly for me to align into the slots. Some other youtuber said you could straighten it out with hot water.
Very helpful, thank you! Where can I get some of those gloves tho?!? 😂
Matthew same here! Just got it on sale at Lowe’s and I brought it home and filled it up with the Husqavarna fuel and still can’t get it started for the first time
You need to hire a team to straighten out your instructions. So far very disappointed in husqvarna. Communication on sales was just as bad.
The fact that there has to be a video demonstrates how awful the paper instructions are. Does husqvarna test thie before they send it out?
When will this be available in Austria?
i wanted to like this video again but i couldn't, so here i am.
When you're taking into account the canopy and doing the plumb line calculations, is it correct to assume that trimming off limbs (changing the width of the canopy) changes the plumb line? It seems obvious it must, but sometimes my intuition is off. No, I never took physics, so I found this video to be a great help -- not just eyeballing cuts (like most of the videos posted.)
Thanks
Thanks for the video. Incredulously the manual that comes with the 330LK does not tell what size line to use but you did. 0.95
How long the battery last in a single charge? In my Stihl MSA300 with an 18" bar cutting 20" diameter oak logs 11 cuts and the Stihl top battery is out of power.
He came to my school today!
That action figure looks like it's a slightly modified and painted Iron Man Marvel Legends figure
That chick looks like she's been slowly taking a crap in her pants the whole time! LOL
Very helpful thank you greatly
Total crap equipment!!
How to fit a chain catcher. My saw never had a chain catcher. I have bought a catcher but there are no instructions.
I'm glad they gave this homeless man a job. ❤
“Ask your supervisor if you have questions” what if I’m mowing my own lawn, do I need to have a supervisor to mow my own lawn?
O I’m j7, c
Just had a KZread nonskipable advert for a robot stihl I have it screen shot.
“Adjust as needed” wow! I wish I would’ve thought of that! How, exactly, am I supposed to measure the blade height on the side that doesn’t have a discharge chute?!?
Aren't these made in China? I bought a Chinese knockoff half the price it's identical
No one in the state of Oklahoma seems to have that tool, what the hell is the deal? Is this damn thing built in Europe?
Hey there lumberjack, really neat idea there and it looks like it works really well but one problem, where the hell does one get that tool?
7:40 Time. One, could also use the 3 gill method, on this far right example. 3 vertical slits, 1 from the front-cut face, above the hinge, 2nd one higher, 1.5 inches to its left ; 3 rd one, same. Expands, the hinge, vertically as well. 2 nd and 3 rd ones, bottom meets top of other one. Progressive ; for LARGE trees.
This Bull💩
Thank you for a truly worthless video, Husqvarna.,
Unfortunately I buy a new one and cannot get it to start at all. Thinking gonna have to take into a shop
Need (shade)
Hey guys, quick question, i just bought a 122 LK trimmer, will i blow my gear head if i take the Guard off? (I’m not commercial just have a small business)
Thanks for nothing
Qué precio tiene?
Me gusto el diseño de la maquina!! Que modelo es?
Yo tengo una 130C,el motor enciende pero la parte de arriba no funciona???y no corta ?hay alguien que me pueda decir.gracias
I once received said serious injuries or damage from one of these bad boys before. Still works a dream though
Ben deserves 👏 a 50% increase 👏 in pay 👏 thank you very much i love my trimmer it was just a matter of love putting line in my trimmer thanks to Ben he made it possible 👍
Great mower but just you know the accessories will cost you an arm and a leg.
Hope the hydro arms last more the 100 hours,, yall better be ready. You will not screw me over. My shit better work lol. Just bought the MZ48, paid a pretty penny. Hope it lasts
3:44 What is the height selection for this part of the video? I got my blade set to 2-7/8” while my selector is at 3”, but there’s no more thread left on the side adjusters. When I move to 4” selection, the blade is around 3-1/4”, and at the 5” setting it is at 3-1/2”. Thanks for any help.
Re spooled like a charm
What size socket to take off the bolt
Wow... what a major waste of time. This is how to check the chain, NOT how to lubricate it as the video title states.
a lifesaver!! thanks!
Love my husky mark 3 blowers and string trimmers. Chainsaw is mid but it was the lowes special, the higher end ones have plenty of power for what I need. Looking forward to this mower