Rip headphone users when Miata enters the picture lol
@TheRacingDoc110 күн бұрын
Not bad but you are overslowing the car. Your turn in is also late and missing apex which is delaying you to get back on throttle.
@tdottme10 күн бұрын
Thanks for the tips, lmk what turn you are referring to. Also see my later video, improved a bit since then.
@ISpinUWin2 ай бұрын
Hey, you’re messing with my brother from another mother! 😂 (I also have a E36 M3) thanks for posting. I actually think it’s fun to watch oops and spin videos as long as they’re safe and no damage, of course. I also like the post of the ones that I have witnessed or participated in. Keep safe out there!
@tdottme2 ай бұрын
Yes definitely, I hope I didn't put too much pressure on him and caused him to mess up. But to clarify this is HPDE4 NASA's Advanced group with open passing. (No point by required)
@l30thelion4 ай бұрын
Nice lap! The speed you carry into 10 is crazy!
@Testtestnotest7 ай бұрын
very nice sound and also a very nice microhpone
@seanmacarthy81298 ай бұрын
Your racing line was sloppy
@tdottme8 ай бұрын
thanks!
@yelover30008 ай бұрын
absolute monster.
@tgbowl9 ай бұрын
Nice driving man! I was there that day too!! You can definitely carry WAY more speed through bishops! And braking WAY to early into 17. It's a tough/scary turn for sure but when you nail it, it feel SOOO good.
@tdottme8 ай бұрын
Thanks! I definitely have a lot more time to gain, I'll be there with NASA in Dec.
@deltabravo66139 ай бұрын
Why did you choose Becker over arh?
@samajier25669 ай бұрын
Asik juga ya
@cedricalexander5309 ай бұрын
If the Miata wasn't slowing you down on the last turn your time would have been one or two seconds faster.
@tdottme9 ай бұрын
Yes, I also made some mistakes, car definately has more in it, I just have to put it together on a clean lap.
@USM3C Жыл бұрын
"Jared! I'm going to be on you like white on rice!!!" 🤣
@USM3C Жыл бұрын
you were MOVING! 2nd fastest time in the race 👍
@Zeekbdos Жыл бұрын
Any dyno results after the tuning with the headers?
@esfobeats Жыл бұрын
what are the wheel dimensions?
@alphonsemonthei8878 Жыл бұрын
Nice driving bro! I can see you got held up a few times waiting for point by’s, the Audi and 997 were not good about giving them. Car sounds amazing as always! How were your oil temps on the last few laps?
@USM3C Жыл бұрын
hell yeah! Nice driving 👍
@tdottme Жыл бұрын
Still a lot to work on!
@giffard3082 Жыл бұрын
𝘱𝘳𝘰𝘮𝘰𝘴𝘮 💖
@MrCarSounds2 жыл бұрын
Wanted to put 20" LMRs on my Melbourne, I think you sold me bro. (nice exhaust too)
@tdottme Жыл бұрын
Go for it!
@CarlosHernandez-gc6no2 жыл бұрын
What Wheels are those?
@tdottme Жыл бұрын
BBS LM-Rs
@alphonsemonthei88782 жыл бұрын
Just love the sound of this car… 🏎 💥 💨
@962RACER2 жыл бұрын
Nice, i've thought about taking mine to Mosport but not before i do a major overhaul first, sitting at 170k km now.
@jermainejacobs36522 жыл бұрын
6
@jermainejacobs36522 жыл бұрын
6
@jermainejacobs36522 жыл бұрын
5
@jermainejacobs36522 жыл бұрын
4
@jermainejacobs36522 жыл бұрын
3
@jermainejacobs36522 жыл бұрын
2
@011701543 жыл бұрын
Reminds me of gt350 👍
@lilDronny3 ай бұрын
Different leagues
@jermainejacobs36523 жыл бұрын
Beautiful
@SpencerBerke3 жыл бұрын
Very tempted. Thanks for the video!
@berfus78233 жыл бұрын
unequal length manifolds ?
@tdottme Жыл бұрын
yes i don't think they are equal length, check the link to my blog in the description for pictures
@elevatedperformance3 жыл бұрын
Does it drone ?
@noelvicentesr36823 жыл бұрын
He’ll yeah!!! Amazing!!
@gg-ip3zo3 жыл бұрын
What type of BBS LM-R are those, and what coil overs?
@saihemanthpingali51144 жыл бұрын
Got 1 for my F80 M3....Far better than the VRSF downpipe as far as the price and quality is concerned. Sounds aggressive when coupled it with MHD burple Tune.
@mattbushton86974 жыл бұрын
How was the fitment on the headers?
@tdottme4 жыл бұрын
Header fitment was great, there was an issue with the xpipe length which I discuss in my blog, see here: www.tdott.me/2019/06/project-headers-part-2-bmw-e92-m3.html
@mattbushton86974 жыл бұрын
@@tdottme thanks for the link. One last question, do you know if the Becker Headers only fit up to the Becker Xpipe or will they mount with any Xpipe?
@tdottme4 жыл бұрын
@@mattbushton8697 The Becker headers come with it's own xpipe setup, like all long tube headers, they can't retain the stock flanges because they end further back than the stock headers. The xpipe design is actually pretty good with the X further up which has been proven to make more power. Any though anything is possible with some custom work if you wanted to fit something else I'm sure it's possible if you really wanted to, but imo not needed.
@michaelwhitehead75904 жыл бұрын
I'm in the blue focus!!!
@tdottme4 жыл бұрын
Nice !
@MD-jf7en4 жыл бұрын
Eargasm. Sounds classy. Deep fierce growl without being too over the top. Like a refined gentleman compared to a teenager trying to get more attention.
@Octaviolara164 жыл бұрын
Sounds mean! Thinking about picking up a set for my e90 m3 but had never heard a clip of these on youtube, thanks!
@eddieramirez47615 жыл бұрын
Mustang dyno..? Numbers seem low. But great to see the headers actually picked up power😍
@tdottme4 жыл бұрын
Note the temps were above 90F on both days. Also the peak numbers between dynos aren't really comparable, it's the delta that matters.
@DriveItRyan5 жыл бұрын
Came here from your thread on m3post. Sounds pretty good!!
@tdottme5 жыл бұрын
Thanks!
@mikesti84065 жыл бұрын
Did you have to drop the subframe to install the headers? Sounds great
@tdottme5 жыл бұрын
Yes, definitely need to drop the subframe for this job. There is no room otherwise.
@mikesti84065 жыл бұрын
Did it gain much down low or was it all in the upper power band?
@tdottme5 жыл бұрын
@@mikesti8406 throughout the rev range. You can see the Dyno graph of you click the links.
@blue04mx535 жыл бұрын
Thanks for posting. I just finished my first 'track day' at Mosport. I was driving a much slower car though. Do you recommend that app?
@tdottme5 жыл бұрын
Hi, yes it's a pretty good app that has alot of great features, the video overlay is really cool and done completely in the app. There are obd2 adapters and faster GPS add-ons that enhance the experience even more.
@miguellemillo25435 жыл бұрын
Im running this track on the 28th. Thanks for posting the vid.
7 жыл бұрын
Hey, great stuff! If you need any free music for your content, come browse through the playlist's i have, i think they would really imrpove your videos!
Пікірлер
Rip headphone users when Miata enters the picture lol
Not bad but you are overslowing the car. Your turn in is also late and missing apex which is delaying you to get back on throttle.
Thanks for the tips, lmk what turn you are referring to. Also see my later video, improved a bit since then.
Hey, you’re messing with my brother from another mother! 😂 (I also have a E36 M3) thanks for posting. I actually think it’s fun to watch oops and spin videos as long as they’re safe and no damage, of course. I also like the post of the ones that I have witnessed or participated in. Keep safe out there!
Yes definitely, I hope I didn't put too much pressure on him and caused him to mess up. But to clarify this is HPDE4 NASA's Advanced group with open passing. (No point by required)
Nice lap! The speed you carry into 10 is crazy!
very nice sound and also a very nice microhpone
Your racing line was sloppy
thanks!
absolute monster.
Nice driving man! I was there that day too!! You can definitely carry WAY more speed through bishops! And braking WAY to early into 17. It's a tough/scary turn for sure but when you nail it, it feel SOOO good.
Thanks! I definitely have a lot more time to gain, I'll be there with NASA in Dec.
Why did you choose Becker over arh?
Asik juga ya
If the Miata wasn't slowing you down on the last turn your time would have been one or two seconds faster.
Yes, I also made some mistakes, car definately has more in it, I just have to put it together on a clean lap.
"Jared! I'm going to be on you like white on rice!!!" 🤣
you were MOVING! 2nd fastest time in the race 👍
Any dyno results after the tuning with the headers?
what are the wheel dimensions?
Nice driving bro! I can see you got held up a few times waiting for point by’s, the Audi and 997 were not good about giving them. Car sounds amazing as always! How were your oil temps on the last few laps?
hell yeah! Nice driving 👍
Still a lot to work on!
𝘱𝘳𝘰𝘮𝘰𝘴𝘮 💖
Wanted to put 20" LMRs on my Melbourne, I think you sold me bro. (nice exhaust too)
Go for it!
What Wheels are those?
BBS LM-Rs
Just love the sound of this car… 🏎 💥 💨
Nice, i've thought about taking mine to Mosport but not before i do a major overhaul first, sitting at 170k km now.
6
6
5
4
3
2
Reminds me of gt350 👍
Different leagues
Beautiful
Very tempted. Thanks for the video!
unequal length manifolds ?
yes i don't think they are equal length, check the link to my blog in the description for pictures
Does it drone ?
He’ll yeah!!! Amazing!!
What type of BBS LM-R are those, and what coil overs?
Got 1 for my F80 M3....Far better than the VRSF downpipe as far as the price and quality is concerned. Sounds aggressive when coupled it with MHD burple Tune.
How was the fitment on the headers?
Header fitment was great, there was an issue with the xpipe length which I discuss in my blog, see here: www.tdott.me/2019/06/project-headers-part-2-bmw-e92-m3.html
@@tdottme thanks for the link. One last question, do you know if the Becker Headers only fit up to the Becker Xpipe or will they mount with any Xpipe?
@@mattbushton8697 The Becker headers come with it's own xpipe setup, like all long tube headers, they can't retain the stock flanges because they end further back than the stock headers. The xpipe design is actually pretty good with the X further up which has been proven to make more power. Any though anything is possible with some custom work if you wanted to fit something else I'm sure it's possible if you really wanted to, but imo not needed.
I'm in the blue focus!!!
Nice !
Eargasm. Sounds classy. Deep fierce growl without being too over the top. Like a refined gentleman compared to a teenager trying to get more attention.
Sounds mean! Thinking about picking up a set for my e90 m3 but had never heard a clip of these on youtube, thanks!
Mustang dyno..? Numbers seem low. But great to see the headers actually picked up power😍
Note the temps were above 90F on both days. Also the peak numbers between dynos aren't really comparable, it's the delta that matters.
Came here from your thread on m3post. Sounds pretty good!!
Thanks!
Did you have to drop the subframe to install the headers? Sounds great
Yes, definitely need to drop the subframe for this job. There is no room otherwise.
Did it gain much down low or was it all in the upper power band?
@@mikesti8406 throughout the rev range. You can see the Dyno graph of you click the links.
Thanks for posting. I just finished my first 'track day' at Mosport. I was driving a much slower car though. Do you recommend that app?
Hi, yes it's a pretty good app that has alot of great features, the video overlay is really cool and done completely in the app. There are obd2 adapters and faster GPS add-ons that enhance the experience even more.
Im running this track on the 28th. Thanks for posting the vid.
Hey, great stuff! If you need any free music for your content, come browse through the playlist's i have, i think they would really imrpove your videos!
well done! good driving!
sounds good bud
how many feet did you end up using?
What is this I dont even