Пікірлер

• 
  @shaunaromine37092 күн бұрын

  Do you have anything on changing the turn signal bulb? I have been searching for days. Mine are corroded. I did find new ones, tons, with red and black wires instead of the green/orange that they have.

• 
  @frednetherlands8873 күн бұрын

  Thank you.

• 
  @rickhicks24456 күн бұрын

  I managed to get my sprocket off with a 3 leg puller and put a large rex clip around them to hold them in place and it popped right off.

• 
  @joshuaspradlin769812 күн бұрын

  Your video is atleast 30 minutes too long

• 
  @shaunaromine370914 күн бұрын

  So how did you fix it?

• 
  @seanmayo20614 күн бұрын

  Hi Michael. Can anyone sell shitty Chinese scooter parts to white people?

• 
  @johnsurguy9043Ай бұрын

  Damn man, I couldn't even finish the video, talking like you're hopped up, made me nervous

• 
  @moniquecampbell1818Ай бұрын

  Why can’t I just find the video that explains which wires go to which switch or at least start at 1 of the 50 videos on this subject I was sent the wrong controllers the pics and description were not what I received in fact I removed the pair from my cart cause the brake switch is on the right side it’s a 139qmb df50sst

• 
  @PgfgIslemАй бұрын

  Thank you

• 
  @quentin1956Ай бұрын

  So frustrating trying to fast forward thru so much , no disrespect meant but this is kind of opposite of simplified

• 
  @zaydollar7150Ай бұрын

  How is it I can’t never order nothing from ur website I order last time u said something about my address not the same wateva n got my refund so idk make no sense fix your website

• 
  @user-yu1sg3pi8pАй бұрын

  Hey I have gy6 50cc turns over I've checked everything set valve lash, timmeing is right new carb, intake, turns over good have fire suck an flow works getting gas, won't crank, did get to crank twice, haven't got it to crank agSin😊

• 
  @mrcleanisinАй бұрын

  Here we go.

• 
  @lancejonesmusicАй бұрын

  Just curious, why not just loosen the valve tappet nuts and then loosen the tappets to take off the tension so the rocker arms come off easy? Pretty sure the tappets are causing the tension. Can adjust valves after the fact when reinstalling. Just a thought, not sure if it is correct!

• 
  @lancejonesmusicАй бұрын

  Also, without the cam chain tensioner engaged, I have not experienced the chain being that tight still. Something seems off but maybe thats just how that scoot cam chain is.

• 
  @DH-fc2osАй бұрын

  Thanks for this i do have a question my gy6 150cc buggy gokart, has been sitting for a long time i got a new battery but it wont start it makes a sound similar to when the starter clutch is bad, i replaced it but it still will not start, i did notice the start clutch even with the new one can turn in both direntions by hand. Im wondering what the problem could be , it sounds like it just spins when turning the key.

• 
  @arifsoeprijono8128Ай бұрын

  sir "How to turn off the alarm when the key is about to start"Your keychain is exactly the same as mine."

• 
  @mrcleanisinАй бұрын

  Someone needs to hide your lock tight so you can't be so obsessed with it.

• 
  @OTLJayJayАй бұрын

  What if it randomly stalls out on me and now is making that sound, ik I have compression, everything on it is basically brand new, at first thought I ran out of gas but nope I had still a quarter tank, new starter CDI box stator igniton coil kit stator and carb, still no crank or even it wanting to turn over

• 
  @seanmayo206Ай бұрын

  If one of the small holes is slightly ahead or behind the surface of the head does that mean the chain is a link or 2 wrong at the crank?

• 
  @thewildbo2 ай бұрын

  That looks better but I don’t think it will last.

• 
  @mrcleanisin2 ай бұрын

  High and low beams are not running lights.

• 
  @mrfredmoore2 ай бұрын

  Painful to watch. This is the best video and installer they could find to try to sell me this overpriced oil cooler? Mounting place is in the instructions!

• 
  @ResachDsreabn2 ай бұрын

  O

• 
  @ceeweedsl2 ай бұрын

  Lost me at stripping without holding the wire...noooo not somebody who has good sense of the physical world..

• 
  @vincentnavea69993 ай бұрын

  wasted my time here

• 
  @elijarsimukoko72823 ай бұрын

  Hello

• 
  @Omnipotant_13 ай бұрын

  That valve noise though

• 
  @agnosticevolutionist35673 ай бұрын

  It’s running but will it bogg under acceleration

• 
  @user-vl2lz9fk9y3 ай бұрын

  Any idea on my 150 is the black wire positive or negative for the fuel gauge. Can't seem to figure it out. The green as well. Thanks.

• 
  @1theschneks3 ай бұрын

  Would a flywheel old on a new stater cause gy6 125cc not to have spark

• 
  @DanielGriffin-tg6if3 ай бұрын

  What kind of tire is that,....? (Jabberjaw!

• 
  @emrahdasdemir59274 ай бұрын

  Merhaba turkiyeden selamlar.sorunu cozebildiniz mi.ayni sorun bende de var.cözüm ney

• 
  @emantsrifemantsal14364 ай бұрын

  Why dog is crying yo??!!!

• 
  @rizalmdyusof57644 ай бұрын

  thank you teacher

• 
  @mikeymikeFType4 ай бұрын

  Shame the person who uploaded this video hasn’t responded to anyones questions.

• 
  @protofreak95184 ай бұрын

  You were a better channel when you focused on making gy6 videos and not telsas and dancing around like a Bruno mars backup dancer.

• 
  @rustypotatos4 ай бұрын

  Dam sorry bro. How is the seat height to handle bar ratio. Do you have to lean forward and does your waist sit higher the your wrists?

• 
  @RCCaveStudios4 ай бұрын

  im having problem with my tachometer not reading on my new digital unit on my moped i ran the black and yellow tachometer wire to the bikes tachometer wire but my rpm is stuck on max can you help please

• 
  @bobbjorkner71404 ай бұрын

  wouldn't this just make it so your engine blows all the oil out till you run out of oil and kill the engine? I'm considering putting one on my Honda Navi after installing a performance camshaft but I don't want to run out of oil on the road because it's pouring it all out of the tube, is this a valve system inside the fittings? what's the difference between this and just driving without your oil cap?

• 
  @allday34334 ай бұрын

  Great video but that snot sniff is so disgusting go blow it out 🤢🤮

• 
  @user-zd5lb7xg6y5 ай бұрын

  Every time the oil pump needs changing for this engine🤔

• 
  @togetunthemood435 ай бұрын

  so unorganized...we really didn't need to see all of that crap next time just have everything ready to go i stopped watching when you stop to check out the stain on the bike cover

• 
  @deecraig326 ай бұрын

  This guy is ridiculous. He needs to listen to self talk he’s always rinsing and repeating rinsing and repeating. Your meticulousness ruins the learning process.. I start to watch your videos then I just cannot listen to your voice anymore…OMG.. just do the damn work GAF!!

• 
  @deecraig326 ай бұрын

  You take so much time to do nothing your videos are atrocious to watch you talk more than you work damn

• 
  @adambeer41776 ай бұрын

  Talk way to much about nothing dude

• 
  @thomasdsmith76786 ай бұрын

  So much wrong here. Read the muffler directions first, get screw directions figured out, "ceramic-plastic"? Seriously. Stick a sock in the dog's mouth or move it away from your video. I want my 9 minutes of my life back, please.

• 
  @seanmayo2066 ай бұрын

  That's a ncy carb? Looks like my oem carb on my 50

• 
  @leeellis19766 ай бұрын

  😄 "promo sm"

• 
  @straggler6666 ай бұрын

  Dummy mounted it first before putting the lines on first

• 
  @karimhabachi40256 ай бұрын

  تىة