Пікірлер

• 
  @donnywilloughby531426 күн бұрын

  Awesome bars bike looks great, only thing I’ll say is your cables should never be set with the brake lever between them they should both be below the lever

• 
  @fokinlordsamaels26 күн бұрын

  yes, you right, i fixed it right after first ride)

• 
  @user-fo6hx2xr2nАй бұрын

  Где купить такой поролон для седла?

• 
  @fokinlordsamaelsАй бұрын

  Я покупал на Ебау,,, не думаю, что в наши дни поиск материалов нечто сложное.

• 
  @user-fo6hx2xr2nАй бұрын

  @@fokinlordsamaels Спасибо

• 
  @marianoleguizamon76542 ай бұрын

  Genial!

• 
  @fokinlordsamaels2 ай бұрын

  Thank you)

• 
  @lamacykinard98216 ай бұрын

  😮are those bars strong enough and safe

• 
  @fokinlordsamaels6 ай бұрын

  Yes, passed MOT, but i took them off because silver coating started to peel off. Considering make another one from stainless steel and polish.

• 
  @lamacykinard98215 ай бұрын

  You really did a great job on them

• 
  @fokinlordsamaels5 ай бұрын

  @@lamacykinard9821 thank you

• 
  @torbjorn229410 ай бұрын

  Love your works mate! Amazing!

• 
  @fokinlordsamaels10 ай бұрын

  wow, thanks, bro

• 
  @motomium11 ай бұрын

  You have done amazing work on this bike. One thing I find surprising that you didn't change, was the footrests. Especially with this rear tyre, they must scrape even more. Say, where did you get these wheels?

• 
  @fokinlordsamaels10 ай бұрын

  i did change footrests and there are video about it. wheells i bought from USA, Mammoth Fat Spoke wheels.

• 
  @motomium11 ай бұрын

  Very nice!

• 
  @motomium11 ай бұрын

  Questionable technique, great result! Wish there was a wider shot of the whole bike with the thing lit.

• 
  @user-ly1ls6ld9h Жыл бұрын

  Great craftsmanship! I might try it myself, but its a lot of work.

• 
  @fokinlordsamaels Жыл бұрын

  main reason to do it yourself is satisfaction of making it by yourself. if you want something faster or cheaper, just buy it from china, but i doubt it will bring you joy.

• 
  @tonyfranklin7095 Жыл бұрын

  Where do you get the LED lining?

• 
  @fokinlordsamaels Жыл бұрын

  Ebay ofc))

• 
  @tonyfranklin7095 Жыл бұрын

  @@fokinlordsamaels Sure, but what is it called? I can't find it. haha

• 
  @fokinlordsamaels Жыл бұрын

  @@tonyfranklin7095 LED Glow EL Wire Neon String Strip Lights Car Interior Atmosphere Rope Lamp 12V

• 
  @wiltondamasio2023 Жыл бұрын

  Muito profissional e lindo o seu trabalho. Parabéns!!!!!!

• 
  @aronbechiom565 Жыл бұрын

  Totally BADASS !!!

• 
  @fokinlordsamaels Жыл бұрын

  thanks a lot

• 
  @Arizonahwy10 Жыл бұрын

  What size sheet metal did you use

• 
  @fokinlordsamaels Жыл бұрын

  1-1.5MM cant remember, sorry

• 
  @anatoliyantonov3565 Жыл бұрын

  Почему все делают одну и ту же ошибку?! Надо обязательно защищать кожу от вредного воздействия ультрафиолета при сварке!

• 
  @fokinlordsamaels Жыл бұрын

  вы абсолютно правы, не раз получал такие ожоги и даже на своих ошибках не учюсь. Спасибо

• 
  @SaironBusatto Жыл бұрын

  Somehow this backtrack remind me Diablo I song

• 
  @fokinlordsamaels Жыл бұрын

  Yes it is Diablo theme music by Vincent Moretto

• 
  @SaironBusatto Жыл бұрын

  @@fokinlordsamaels fuck!! I knew it!!

• 
  @mygrumpyoldman Жыл бұрын

  Excellent video …thanks

• 
  @youcanthide004 Жыл бұрын

  Nice work bro / " I know the pieces fit " Great Band, and great song choice, quite apropos!

• 
  @2wheel-therapy Жыл бұрын

  Tank came out awesome! Did you weld the stretched part closer to the seat or did you just Compound it onto the tank? Your gas tank modification video skips that part of how it was actually installed on the tank. I need to have this done to my gas tank so I'm curious. Thanks and keep up the great work!

• 
  @fokinlordsamaels Жыл бұрын

  Thanks, i welded piece of shaped sheet to the tank, just to visually “wrap” around the seat. Volume of the tank itself stays the same, hope you got your answer

• 
  @2wheel-therapy Жыл бұрын

  @@fokinlordsamaels yeah the welded piece on the bottom around the seat was shown in the video. I was curious about the top part, how you attached it to the tank? Is the top part welded all the way across or is it just bodywork holding the metal onto the tank?

• 
  @fokinlordsamaels Жыл бұрын

  @@2wheel-therapy yes, it is welded on

• 
  @2wheel-therapy Жыл бұрын

  @@fokinlordsamaels I figured but just wanted to make sure. Thanks!

• 
  @Punkerage Жыл бұрын

  Nossa ficou muito foda. deu outra cara para a moto

• 
  @fokinlordsamaels Жыл бұрын

  yea, thats the plan)

• 
  @chrisstewart3768 Жыл бұрын

  beautiful work.

• 
  @jezzalinko Жыл бұрын

  nice video, im hoping to try fibreglassing soon, do you have a vid showing what you did with the centre bracket section it was flat then it looks like youve cut it up a bit but not sure how you went about it and kept strength in it as well or shaped it nicely

• 
  @fokinlordsamaels Жыл бұрын

  no, unfortunately that part i did without camera, but thanks for the asking

• 
  @briancullen5183 Жыл бұрын

  Pretty sharp.

• 
  @fokinlordsamaels Жыл бұрын

  thanks a lot

• 
  @jezzalinko Жыл бұрын

  excellent work, well done

• 
  @ryanchester1189 Жыл бұрын

  I failed in making tbe impression. I believe it was because I used a cheap glue spray. Can somebody that was successful tell me what type of glue you used for your impressions??

• 
  @fokinlordsamaels Жыл бұрын

  you have to leave glue to "dry" a little, before press pieces of leather together, i think that was your fail?

• 
  @ryanchester1189 Жыл бұрын

  Awesome thanks for sharing

• 
  @fokinlordsamaels Жыл бұрын

  thank you

• 
  @82victnwin Жыл бұрын

  Can uake such foot rest for TVS Ronin?

• 
  @fokinlordsamaels Жыл бұрын

  i can and sure you do it yourself too

• 
  @jeffquinones4007 Жыл бұрын

  Y0u should make and sell

• 
  @fokinlordsamaels Жыл бұрын

  making anything for sell is profitable if its a lot of items or very exclusive order, i do it just my own pleasure.

• 
  @blowme51502 жыл бұрын

  Some sepultura" nice

• 
  @donnovanschultz94782 жыл бұрын

  So interested in doing this just don't know where to start

• 
  @gkase39792 жыл бұрын

  can you guys make ropetwist ape hangers

• 
  @fokinlordsamaels2 жыл бұрын

  Not sure what is ropetwist and there is no “guys” or company, i am single hobbyist who just following his own vision.

• 
  @jasonnowakowski3932 жыл бұрын

  Could you make me a fender for my triumph thunderbird 1600cc I've chopped and bobbed

• 
  @fokinlordsamaels2 жыл бұрын

  whole point of my channel is to show people, that you can make your bike yourself, i dont have a lot of experience and mostly doing my own mistakes and success. if i would take a job to make your fender, it would cost a lot more than you can find around, someone, whos business is to make fiberglass parts, someone with proper equipment and experience. anyway, thanks for offer)

• 
  @ARISSYUHADANGAWI.2 жыл бұрын

  Jozzzzz

• 
  @ARISSYUHADANGAWI.2 жыл бұрын

  Jozzzzzzzz

• 
  @T0tenkampf2 жыл бұрын

  You get a like for the tunes even if I didn't like the teaching...sounds like Joey Taffola

• 
  @3613jeremy2 жыл бұрын

  God I wish I would of learned to work with metal guys like me on my Yamaha Raider group are always trying to find someone to make custom parts that won't just steal the money

• 
  @fokinlordsamaels2 жыл бұрын

  i have to say, you will never learn if you wont start trying to make things yourself)) my channel is only small drop in huge sea of youtube craftsmanship, watch and learn.

• 
  @kaluychiy8132 жыл бұрын

  Ты фашист!!!

• 
  @fokinlordsamaels2 жыл бұрын

  Нет, фашисты сегодня удобряют поля Украины.

• 
  @Danilka-b5y2 жыл бұрын

  Рус!

• 
  @t.k.77192 жыл бұрын

  Hello how many millimeters of thickness of the iron saddle you use

• 
  @fokinlordsamaels2 жыл бұрын

  If i understood you right, than my steel base is just 2mm thick, i would reccomend 3mm, but i used what i had in my garage.

• 
  @t.k.77192 жыл бұрын

  @@fokinlordsamaels thanks bro good day👍

• 
  @damznipusa842 жыл бұрын

  about the spray that you use ... what is na name of it??

• 
  @fokinlordsamaels2 жыл бұрын

  You can use any spray glue brand.

• 
  @janmller66902 жыл бұрын

  Great, but it's just sit there loose? No need to mount it into place?

• 
  @fokinlordsamaels2 жыл бұрын

  it is mounted and key locked same as original seat

• 
  @alexkit2902 жыл бұрын

  И тоже такой взять

• 
  @alexkit2902 жыл бұрын

  Что за материал толстый светло зелёный вы приклеили как мягкую прокладку

• 
  @fokinlordsamaels2 жыл бұрын

  Это паралон и он голубого цвета.

• 
  @clarkcrossley75792 жыл бұрын

  Should have done the Horde logo man!

• 
  @fokinlordsamaels2 жыл бұрын

  i had one with Horde logo on another bike at that moment already

• 
  @johanvonshitzengiggles90462 жыл бұрын

  Dude!!! Very nice!! How does it feel?

• 
  @fokinlordsamaels2 жыл бұрын

  very comfortable, thanks)

• 
  @miroslavk32 жыл бұрын

  extra svaka cast ...sve pohvale za rad..

• 
  @fokinlordsamaels2 жыл бұрын

  thank you

• 
  @chefboyardee82782 жыл бұрын

  Won't the upholstery come loose after a while because it's only connected to the fiberglass by glue instead of staples? I know you cant staple in fiberglass which is what makes making custom seats so hard. Still a nice job👍👍

• 
  @fokinlordsamaels2 жыл бұрын

  I secured it with rivets from the back, dont remember if its seen on the video

• 
  @chefboyardee82782 жыл бұрын

  @@fokinlordsamaels Oh thats pretty smart, im building a custom honda cruiser and im familiarizing myself with building seats, so i might just use this technique

• 
  @fokinlordsamaels2 жыл бұрын

  @@chefboyardee8278 good, i hope to see your job done

• 
  @chefboyardee82782 жыл бұрын

  @@fokinlordsamaels Thanks 👍

• 
  @frank29172 жыл бұрын

  😎 Respekt

• 
  @dewabambootattoo47082 жыл бұрын

  Hello from Indonesia ,, always love your job and so good

• 
  @dewabambootattoo47082 жыл бұрын

  Nice ,,good job bro 🙏🙏

• 
  @joeyg74462 жыл бұрын

  M"Lord, Iam honored that you have taken your time to show me how I can achieve the level of your expertise. You have explained and shown me in depth, how I can duplicate your results. This will be my winter project. I have already copied your Horde Air Intake. When asked how did I do it, I point them to your direction. With much respect... Thank You...