Пікірлер

• 
  @nickysan16392 күн бұрын

  I have another chainring connection system, where can I find the placement ?

• 
  @aymanabouseif291518 күн бұрын

  My QiCycle doesn't have assist anymore, the battery is fully charged, the display is working but the motor is not .. can anyone point me to how to diagnose it? Is it one of the break sensors or the torque sensor, or possibly a bad contact?

• 
  @aymanabouseif2915Ай бұрын

  /There is no assist, the motor is not running on my QiCycle international version. Can anyone help

• 
  @user-fe9nn7ec7s3 ай бұрын

  I love it! Thank you for this videos. I bought two Qicycle :)

• 
  @enzomalibu46843 ай бұрын

  Grazie mille,io vivo negli states e mi hai risolto un problemone….

• 
  @GinoIlpino-yc6yb4 ай бұрын

  Ciao ThemiguelBi, come hai collegato la presa tripolare alla ciabatta?

• 
  @cenobria5 ай бұрын

  Queria comprar las herramientas para desmontar el plato pero el enlace de compra ya no sale nada , serias tan amable de poner un enlace nuevo gracias

• 
  @Wuei1085 ай бұрын

  Is the other brake more effective or only better cooled? I changed the back brake and it works better. Too much grease on the original brake? Tomorrow i will change the front brake pads. I changed from 11 teeth sprocket to a 16 teeth sprocket. Much better uphill performance.

• 
  @Wuei1085 ай бұрын

  Interessantes Video. Doch meine mit gelieferten Pedale sind aus Aluminium. Falls ich Ärger bekomme mit dem Tretlager sehe ich hier wie das aus getauscht wird. Schutzbleche und Gepäckträger und Lenkererhöhung habe ich bei Aliexpress bestellt.

• 
  @Wuei1085 ай бұрын

  Kurbelabzieher.

• 
  @Wuei1085 ай бұрын

  I look vorward to the condition my qicycle comes to me today.

• 
  @ottoyela21277 ай бұрын

  eres un monstruo esto es un decálogo para auto mantenimiento óptimo, agradecimiento total desde Guatemala

• 
  @abdennour1837 ай бұрын

  Ihav CP2102 TTL converter and have installed Driver ,and also Driver for STM32 ...and get this error messag ,flash loader demonstrator no response from the target ??Can I Remove this STM32 change it with another one and Flash it ?

• 
  @alessiaSofia-iz9ek7 ай бұрын

  Ma non si può fare con la ps2????

• 
  @carloszavala35837 ай бұрын

  Hola buenas noches, disculpa amigo, desde hace tiempo para poder encender mi qycicle tengo que retirar la batería y volver a insertarla, si no no enciende,¿ sabrás alguna solución? Muchas gracias

• 
  @masanaker8 ай бұрын

  Recomiendo freno de disco trasero y suspensión delantera con freno v brake

• 
  @alexbonamore95178 ай бұрын

  Grazie mille per il video stavo impazzendo a capire come calibrare il driver. Premeetto che non dispongo di una CNC shield e che ho dovuto utilizzare un condensatore più grande ma per il resto la configurazione è la medesima. Purtroppo però anche seguendo le istruzioni per collegare driver, alimentazioni e scheda arduino ho un problema: il driver si surriscalda e lo stepper non compie tutti i passi vibrando parecchio. A cosa può essere dovuto?

• 
  @mugiraharjo62708 ай бұрын

  great, complete information, also printing time..

• 
  @hardhardRocker8 ай бұрын

  Si chiama tensione e non voltaggio

• 
  @craigtucker77710 ай бұрын

  For 20bux you can buy useful tool like screwdriver

• 
  @Luke-san10 ай бұрын

  After 4 years your video is still relevant. I thought something was wrong with my rear brake. Not the performance, I can make it lock up without an issue but it rattles. You wiggling it at 21:21 gives me confidence that it is 'normal'. I haven't seen diagrams on how to take it appart but it wasn't like that in the beginning. I guess you made a lot of people happy with these videos.

• 
  @aymanabouseif291518 күн бұрын

  Fully agree, great video

• 
  @voyzorneeden445311 ай бұрын

  Ciao. Siamo un venditore Amazon. Siamo specializzati in prodotti con il nostro marchio, principalmente smartphone e tablet. Se desideri recensire i nostri prodotti, possiamo essere partner

• 
  @tamox596511 ай бұрын

  Hello, can you do vidéo in french. 👍

• 
  @virendranath190911 ай бұрын

  Heiio sir,Imade this machine sir how started machine 1st step.

• 
  @lucagatta186911 ай бұрын

  funziona anche per Sky Q ?? ( 1080p FULL HD )

• 
  @ashishmhetar8672 Жыл бұрын

  Hi, can you please share latest softwares and versions to be used. If possible video on the same.

• 
  @sanjithv8533 Жыл бұрын

  When i press only the x axis both the x,y axis is moving it creates a angular line please reply sir

• 
  @vilchezjo Жыл бұрын

  +1

• 
  @ronnyklein9313 Жыл бұрын

  is there a stl file or a link for that nice machine. Thx a lot

• 
  @fralam7791 Жыл бұрын

  Prima di tutto le faccio i complimenti per i video molto istruttivi, con l'occasione chiedo un consiglio su come poter visualizzare l'andamento dell'onda di un inverter da 220 v prodotta tramite un pannello fotovoltaico che carica due batterie con un regolatore di carica, dato che con l' oscilloscopio dso150, come questo, ho visto che la sonda non può superare i 50 v, resto in attesa di risposta grazie.

• 
  @johnbauer9972 Жыл бұрын

  Great video, I really like the TTS voice over. Fortunately I have the latest firmware. I just got the same voltage booster and made a USB to 9v barrel cable so I can power it from a USB battery pack, USB power brick or computer USB port.

• 
  @lww3988 Жыл бұрын

  very nice video!

• 
  @cfernandez00 Жыл бұрын

  alguien tiene problemas con la bateria?

• 
  @maxmustermann2596 Жыл бұрын

  On the one hand, the construction has some amazing fits. However, the feeder always jams, even after lubricating. It looks like the top surface of my printer was a little bit too rough, and it added some margin, which breaks the mechanism. The latches barely fit. I should have printed with a lower temperature for the parts, which didn't need the strength, but the accuracy. I didn't try to grind it down, yet

• 
  @cesaralo1238 Жыл бұрын

  XD?

• 
  @lgdelgado Жыл бұрын

  Very nice videos with detailed explanations. Thanks. I think you forgot to mention how to switch brake lines between handles, in Chinese version :) On Qicycles you really need to unscrew the handlebrake adjustment screws until you see the wire. Then you pull each handle to remove the wire pin from the handle, pushing the wire to the interior...

• 
  @3g0k32h Жыл бұрын

  Podemos instalar un freno de disco o ese me lo recomiendas...

• 
  @josecarloscampossanchez5508 Жыл бұрын

  Hola muy buenas. El video es muy bueno. Estoy intentando cambiar el pedalier y tras mucho esfuerzo (estaba todo super duro), he conseguido llegar hasta el ultimo paso. Sin embargo, la parte que es de metal del pedalier de fabrica no hay forma de quitarlo, esta tan duro que no si si está hasta pegado.... y estoy empezando a desgastar la rosca con los intentos fallidos. ¿Algun consejo o algo para poder quitarlo? Muchas gracias

• 
  @fxxxaxxx6359 Жыл бұрын

  Can I use a 5 volt 2 amp charger or will the internal lithium batteries be damaged? I have a Huawei charger with 5 volt 2 A or 9 volt 2 ampere output. What do you suggest me? 🇮🇹 Posso utilizzare un caricabatterie da 5 volt 2 ampere o si rovinano le batterie interne litio? io ho un caricabatterie della Huawei con output 5 volt 2 A or 9 volt 2 ampere. Cosa mi consigli?

• 
  @RicardoGarcia-dn6pg Жыл бұрын

  Por favor, dígame nombres y proveedor de las piezas a sustituir, gracias

• 
  @mariodasilva8729 Жыл бұрын

  Since I see you still are using the 16" wheels, will you consider changing the rear wheel to a 20"? I understand there is an internal 7-gear hub by Shimano that should come with a 7-level thumb shifter. The Front Fork also might need changing to one for 20" wheels and with a suspension, if you are changing the front wheel to a 20".. I also would like to see a change to Disk brakes as the standard drum brake is not too efficient...!

• 
  @lgdelgado Жыл бұрын

  I think upgrading to 20" it's a major upgrade, not needed for this bicycle. A simple tire width upgrade from 1.75" to 2.00 or maybe 2.25" is already enough to bring more stability and riding comfort...

• 
  @dyarau5315 Жыл бұрын

  I really enjoyed your video, Great work!!!

• 
  @0nepieceofmybody Жыл бұрын

  E dove lo hai trovato a 20 euro

• 
  @tiromancino_tt Жыл бұрын

  interessante modo di fottersi l'oscilloscopio con la scusa di aver comprato un prodotto non originale .... già fregato una volta dai cinesi di ...

• 
  @desarrion1972 Жыл бұрын

  Dove trovo il firmware dello schermo?

• 
  @kyosamurai1979 Жыл бұрын

  Una pregunta amigo tendrás conocimiento el día de hoy venía andando y en un bache se me apagó la pantalla apenas tengo una semana con ella También me sale el código 16348

• 
  @goichihundredkuvkousky4860 Жыл бұрын

  Lamentablemente no esta en sub español.

• 
  @goichihundredkuvkousky4860 Жыл бұрын

  Hello, your content helped me a lot but I have some doubts. of the two motors, which is for the "x" axis and "y" axis. each motor has 4 wires of different colors, how to know which wire color is connected to the driver boards at "x", "y". In the calibration you only use the command for the "x" axis which is $100= 80, but you don't use for the "y" axis $101= ?. Thank you I wait your answer.

• 
  @JorgeAlvarez-wf4ej Жыл бұрын

  Tienes el modelo de eje de pedalier para pedir por Aliexpress?

• 
  @andyslab2799 Жыл бұрын

  What are the slicer setting?

• 
  @maxmustermann2596 Жыл бұрын

  Good point. For me, the stringing of some parts broke the mechanism. However, I am sure the drive shaft needs every layer adhesion, it can get.