I wonder if that bulge is to help indicate its U.S. made, 922r compliant? I'd be interested in swapping some gen 2 parts into a gen 1. Also, does that new 7 round tube hold 7 2 3/4 shells? The old one hold almost 7, NATO 2 3/4.
@shot970213 күн бұрын
I dislike the mag extension. Should be a one piece tube. I'd have to change it out if it were mine. Or just get the SBS entry model with the 14 inch barrel.
@nooneyouknow2420Ай бұрын
I just got a 11796 from Illinois. Tiny charger and bolt carrier reset button is teeny. All going to cost me $$ to enlarge. The stock is three position. What is going on here?
@JosephX143XАй бұрын
Which angle handle is that .. great vid
@rajsteint6487Ай бұрын
You talk just like buddy from Garand Thumb lol
@RC-wh4xr2 ай бұрын
My 11733 came with an aluminum eight round side-saddle.
@hawjhawj52513 ай бұрын
Difference between LE version and H20?
@Smokkedandslammed3 ай бұрын
This is the only M4 I've liked, this one actually looks cool lol
@Dc-jg2ti3 ай бұрын
Gotta say, I agree that I don’t like the look of the stock as much, however that simple push button to slide it out and in instead of the twist deal sells me on it.
@MD-mm1zv4 ай бұрын
Looks like Benelli is following LWRCI's lead with the propriety handrail. Same attachment philosophy. Looks cool; works great.
@5thcrx4 ай бұрын
13:56 is a QD point once you remove the rubber cap. I have the same shotgun.
@lambchop62103 ай бұрын
How did you remove it? Mine seems to be a solid plastic disk in there.
@AhmetTan474 ай бұрын
I've been thinking about how I can get the side saddle of this Mesa Tactical for a year. I guess it wasn't suitable. A very informative video. If there is a suitable side saddle, can you share the link of the product with me? There are two reasons why I bought Benelli m4. Firstly, even armies use this weapon. The second one is because it looks very noble when you attach the aluminum side saddle.
@AhmetTan474 ай бұрын
8:12 Even though I put so much pressure on the fore-end, it just won't align. Since I live in Turkey, there is a 2+1 wedge in the pipe magazine due to hunting rules. I had to disassemble it when I was going to use it for shooting, but I could never put it back on again. It doesn't fit perfectly. Do you have a tactic?
@rolo66145 ай бұрын
Thanks for sharing this video. I wanted to upgrade my stock hand guard to the LE hand guard with the bottom grip like yours. Any websites you would recommend to purchase theses mods? I appreciate your help!
@sean80395 ай бұрын
Mesa tactical fixed the issue with the saddle. I just received mine and it fits perfectly
@kenmueller14665 ай бұрын
Do you like the tape switch? Any problems with it? Or would the IWC Mount still be better.
@mikehudgins57645 ай бұрын
This was a great review, much appreciated! Any chance you could do a short one showing the iron sights in low light? Thx
@ThePerpetualStudent5 ай бұрын
How big are your balls? Jeebus
@dante69d6 ай бұрын
Does that new rail expose the pistons to the elements?
@grindleia6 ай бұрын
The mesa tactical shell holder works just fine, it just doesn't index with the rail like the stock one. It's secure though, and doesn't move around.
@bikeracerdude6 ай бұрын
BEAUTIFUL Benelli M4, great Streamlight, but then you used an optic from a Chinese OEM maker, Holoson.
@Howl2696 ай бұрын
so sexy
@amateurgress59246 ай бұрын
anyone know if the h20 version is painted or plated? If painted in cerakote, does it hold up well enough to justify the extra expense or is it purely cosmetic and no real added protection? Thanks
@himmetkizmaz87876 ай бұрын
Reddot Used ???
@mtiger57 ай бұрын
Nice shotgun , i personally am impartial to my traditional skeleton stock on my m4 .those esstac shell holders are awesome
@smokingbeetles57938 ай бұрын
Comes with complimentery Weaver bits. So make sure attachments fit weaver and not picatini.
@kyleAGB8 ай бұрын
Filmed by Mishaco
@raulbaltierrez99268 ай бұрын
Don’t be afraid of changing out the forend, I installed a Strike Industry forend and it is m-lok compatible
@ThatsAmore2142-mz1dj8 ай бұрын
That stock is ugly as sin on that gun.
@TuscanyFTX8 ай бұрын
Good thing you didn’t buy it then. Fyi most stocks look like shit on most guns. Doesn’t stop people from buying it.
@ThatsAmore2142-mz1dj8 ай бұрын
@@TuscanyFTX Sounds like you need to be taught a lesson. Be quiet unless you’re being spoken to. Otherwise…
@TuscanyFTX8 ай бұрын
@@ThatsAmore2142-mz1djkeyboard warrior here. Come make me.
@MrLew19658 ай бұрын
Is that Red Dot a 510C ?? How do you like it ??
@caramurat67728 ай бұрын
türkiyede çok pahalı
@mrsimdog19 ай бұрын
Buttermilkswag- Can you tell us the website or company for the Handguard? You mentioned it was a Benelli handguard but I can't find it on any site? If you have a name, model number, phone etc that would be great. Thx
@TuscanyFTX8 ай бұрын
Midwest gun works.
@MrLew19659 ай бұрын
Question's ? Can the Older Plastic Hand Guards (Left & right) still be put on in place onto this T Pro Version if you choose not to use this T-Pro New Hand Guard system ?? TY
@TuscanyFTX8 ай бұрын
Yes.
@daisedenid9 ай бұрын
No chokes and proprietary mount points seem like a non starter
@seeno17 ай бұрын
Why do you want a choke
@theunofficialresults2314 ай бұрын
@@seeno1 Would've liked to try a muzzle break, personally.
@nodarzaldastanishvili89109 ай бұрын
❤❤❤❤
@bluespy410 ай бұрын
Hey I’m considering this or a 11715, is the handgaurd slippery at all, or do you think this model is a good upgrade and worth it? The 1175 comes threaded with the C stock and smaller controls.
@Danko8810 ай бұрын
I had no idea this model even existed, walked into my LGS and they had 4. Ended up making a deal for a 11732 at 2K total out the door with tax, after looking online seems I didn't do too bad. I dont see anything to change really, also running a 510C sure like this optic.
@cops31210 ай бұрын
The magazine tube is actually modified from a 5 shot to a 7 shot. The bulge part is where the threads are. Also your charging handle and bolt release are not factory, but after market.
@AB-3088 ай бұрын
This is all incorrect. 11732/11733 etc come like this from factory.
@TuscanyFTX8 ай бұрын
That’s not correct.
@cops3128 ай бұрын
Ok, I stand corrected, but a true USMC Benelli M4 has a straight magazine tube and older controls, not the factory upgrades.
@TuscanyFTX8 ай бұрын
@@cops312this is how the new variants are coming for military and law enforcement. They’ve been on the open market for almost 5 years everywhere but here in the states.
@seeno17 ай бұрын
This is how it comes from factory
@sgtusa9010 ай бұрын
Ur AUDIO Is TOO LOW :((
@VinhNguyen-fb9lk11 ай бұрын
Msrp ?
@buttermilkswagreal10 ай бұрын
You can expect to spend around $2,300-$2,400 (tax included) brand new. But I'm basing that off of gunbroker prices and how much I bought it for. You might be able to get it cheaper.
@qiangwang816511 ай бұрын
What is the sling. Looks pretty
@Gruntilda6410 ай бұрын
Thought the same so I researched it, looks like it's from Wellsmadecompany but I don't see it listed on their site anymore.
@qiangwang816511 ай бұрын
Hello, could you give me a list for your build? I like them and I am getting same one
@buttermilkswagreal10 ай бұрын
Benelli M4 11732, Holosun 510C (Green Reticle), Streamlight Protac HL-X Laser ( I think. Forgot the exact name lol), BCM KAG grip. You asked about the sling in your other comment. It's from Wellsmade Co. They're kind of meme/joke slings, but they're actually pretty good slings. They're thin though. So if you have a heavier gun you might one to buy a sling pad for it. Theirs or someone else's.
@chrisharris9710 Жыл бұрын
Fairly sure those models are modified post import. The pesky 922r law keeps Benelli from shipping M4s with collapsible stocks and 7 round tubes. That’s why you see the bulge in the tube, it’s from the addition of a tube extension. The forend is not a stock Benelli part from Italy, it’s going to be made in the US. More than likely the trigger, hammer, and disconnector is US made as well.
@TuscanyFTX8 ай бұрын
Negative. These are the LEO/MIL variants. Once they’re imported the dealer can sell to who they want. 922r only pertains to neutered versions being imported as such.
@Bubba_Fett_ Жыл бұрын
thx, cool video man, the hand guard is a huge win imo; items to wrap my thumb over when gripping and often get a toasty thumb after 15+ rounds. Gen2 is a littler heavier in the front but that is OK for me. Mag upgrade from factory is much nicer; and it’s VERY tough to find a Gen1 5-slot adjustment now days. larger buttons - sooo awesome! that Benelli “m-link” system i think they call it is quirky, but works
@user-ej3cs4fg2h Жыл бұрын
You commented the M$ 11732 has a fixed choke, Benelli states manual choke.
@buttermilkswagreal Жыл бұрын
I'm sorry. I think I'm a bit ignorant here. What's a manual choke?
@user-ej3cs4fg2h Жыл бұрын
@@buttermilkswagreal Correction - The M4 11732 has a fixed modified choke. I received incorrect info from the dealer. In layman's terms a fixed choke is a slight modification at the end of the barrel that is fixed in place by the manufacturer - can't be removed. A shotgun with a manual choke has a threaded barrel and which allows you to interchange multiple "chokes" which are slight variations at the end of the barrel that change the shot spread.
@user-ej3cs4fg2h Жыл бұрын
Correction - I received my 11732 and it has a fixed choke, dealer provided incorrect info to me...
@buttermilkswagreal Жыл бұрын
@@user-ej3cs4fg2h Oh ok manual means adjustable. Sorry about that. I've only heard it called adjustable. 😅
@MrLew19658 ай бұрын
That Sucks !! Having Choke choices like previous versions is a nice thing !!@@user-ej3cs4fg2h
@advivere Жыл бұрын
Great Video
@lorenzomagnanelli8088 Жыл бұрын
i have the same one.. it is a beast of a gun!!! but i have problems removing the stock.. any tips?
@buttermilkswagreal Жыл бұрын
I'm sorry. I haven't tried removing the stock.
@tmkangas197 ай бұрын
The button needs to be pushed way in and the turn the stock. You might use a pen to push on it or I seen one old timer put a nut down on the button and push.
@BagsEsquire Жыл бұрын
Got this exact model a few weeks ago. Absolutely love it. Only slight disappointment was I thought the handguard was MLOK as well. So easy to disassemble and clean this bad boy and an absolute joy to shoot. I like the oversized controls but prefer Freedom Fighters Tactical charging handle so ended up switching that out. At least I have a spare now lol. I think I also prefer the square bolt release from TT so I ordered that. Good to hear about Mesa Tactical working on a model to fit the LE.
@MrLew19659 ай бұрын
Can you swap out the original Plastic M4 Handles in place of this New T Pro Rail system ?? TY
@TuscanyFTX8 ай бұрын
M-Loc attachments will work on this hand guard. You just have to take off the little locating nubs on the back of the attachment and use countersunk screws with loctite so the counter sunk head centers the attachment up on the rail and loctite keeps it secured In place after torquing down.
@TuscanyFTX8 ай бұрын
@@MrLew1965yes.
@user-jn8sg5ds1h Жыл бұрын
Any update on the mesa tactical shell holder? I am glad i watched this video. I was about to order that shell holder.
@buttermilkswagreal Жыл бұрын
I haven't messaged them since then. The 6-shot carrier should be ready based on their timeline, but I wouldn't buy one until it's confirmed directly. If you decide to message them, remember to mention you have the new style handguard.
@user-jn8sg5ds1h Жыл бұрын
@@buttermilkswagreal Mesa Tactical told me all of there shell holders on their website will fit this handgaurd now. I am in contact with benelli for the handgaurd picatinny rails. They were not in the box with my m4. I can't find the picatinny mounts anywhere. I want to mount my light but can not until I get this resolved.
@buttermilkswagreal Жыл бұрын
@@user-jn8sg5ds1h Oh, that's very unfortunate with the rails. They come in a little baggy and can be easily misplaced by the store/seller. If you haven't already, I'd try contacting the place you bought from. But that sucks. I wish you the best of luck with that.
@henryn858 Жыл бұрын
Can anyone by the LE models? Or is it restricted to Law Enforcement?
@buttermilkswagreal Жыл бұрын
I don't think there's any particular restriction to buying/owning. You can find them for sale all around the internet and in gun shops.
@TuscanyFTX8 ай бұрын
Correct. You can buy them once they’re imported here under mil/Leo use. Dealers sell them to civilians every day. There’s nothing illegal about it.
Пікірлер
I wonder if that bulge is to help indicate its U.S. made, 922r compliant? I'd be interested in swapping some gen 2 parts into a gen 1. Also, does that new 7 round tube hold 7 2 3/4 shells? The old one hold almost 7, NATO 2 3/4.
I dislike the mag extension. Should be a one piece tube. I'd have to change it out if it were mine. Or just get the SBS entry model with the 14 inch barrel.
I just got a 11796 from Illinois. Tiny charger and bolt carrier reset button is teeny. All going to cost me $$ to enlarge. The stock is three position. What is going on here?
Which angle handle is that .. great vid
You talk just like buddy from Garand Thumb lol
My 11733 came with an aluminum eight round side-saddle.
Difference between LE version and H20?
This is the only M4 I've liked, this one actually looks cool lol
Gotta say, I agree that I don’t like the look of the stock as much, however that simple push button to slide it out and in instead of the twist deal sells me on it.
Looks like Benelli is following LWRCI's lead with the propriety handrail. Same attachment philosophy. Looks cool; works great.
13:56 is a QD point once you remove the rubber cap. I have the same shotgun.
How did you remove it? Mine seems to be a solid plastic disk in there.
I've been thinking about how I can get the side saddle of this Mesa Tactical for a year. I guess it wasn't suitable. A very informative video. If there is a suitable side saddle, can you share the link of the product with me? There are two reasons why I bought Benelli m4. Firstly, even armies use this weapon. The second one is because it looks very noble when you attach the aluminum side saddle.
8:12 Even though I put so much pressure on the fore-end, it just won't align. Since I live in Turkey, there is a 2+1 wedge in the pipe magazine due to hunting rules. I had to disassemble it when I was going to use it for shooting, but I could never put it back on again. It doesn't fit perfectly. Do you have a tactic?
Thanks for sharing this video. I wanted to upgrade my stock hand guard to the LE hand guard with the bottom grip like yours. Any websites you would recommend to purchase theses mods? I appreciate your help!
Mesa tactical fixed the issue with the saddle. I just received mine and it fits perfectly
Do you like the tape switch? Any problems with it? Or would the IWC Mount still be better.
This was a great review, much appreciated! Any chance you could do a short one showing the iron sights in low light? Thx
How big are your balls? Jeebus
Does that new rail expose the pistons to the elements?
The mesa tactical shell holder works just fine, it just doesn't index with the rail like the stock one. It's secure though, and doesn't move around.
BEAUTIFUL Benelli M4, great Streamlight, but then you used an optic from a Chinese OEM maker, Holoson.
so sexy
anyone know if the h20 version is painted or plated? If painted in cerakote, does it hold up well enough to justify the extra expense or is it purely cosmetic and no real added protection? Thanks
Reddot Used ???
Nice shotgun , i personally am impartial to my traditional skeleton stock on my m4 .those esstac shell holders are awesome
Comes with complimentery Weaver bits. So make sure attachments fit weaver and not picatini.
Filmed by Mishaco
Don’t be afraid of changing out the forend, I installed a Strike Industry forend and it is m-lok compatible
That stock is ugly as sin on that gun.
Good thing you didn’t buy it then. Fyi most stocks look like shit on most guns. Doesn’t stop people from buying it.
@@TuscanyFTX Sounds like you need to be taught a lesson. Be quiet unless you’re being spoken to. Otherwise…
@@ThatsAmore2142-mz1djkeyboard warrior here. Come make me.
Is that Red Dot a 510C ?? How do you like it ??
türkiyede çok pahalı
Buttermilkswag- Can you tell us the website or company for the Handguard? You mentioned it was a Benelli handguard but I can't find it on any site? If you have a name, model number, phone etc that would be great. Thx
Midwest gun works.
Question's ? Can the Older Plastic Hand Guards (Left & right) still be put on in place onto this T Pro Version if you choose not to use this T-Pro New Hand Guard system ?? TY
Yes.
No chokes and proprietary mount points seem like a non starter
Why do you want a choke
@@seeno1 Would've liked to try a muzzle break, personally.
❤❤❤❤
Hey I’m considering this or a 11715, is the handgaurd slippery at all, or do you think this model is a good upgrade and worth it? The 1175 comes threaded with the C stock and smaller controls.
I had no idea this model even existed, walked into my LGS and they had 4. Ended up making a deal for a 11732 at 2K total out the door with tax, after looking online seems I didn't do too bad. I dont see anything to change really, also running a 510C sure like this optic.
The magazine tube is actually modified from a 5 shot to a 7 shot. The bulge part is where the threads are. Also your charging handle and bolt release are not factory, but after market.
This is all incorrect. 11732/11733 etc come like this from factory.
That’s not correct.
Ok, I stand corrected, but a true USMC Benelli M4 has a straight magazine tube and older controls, not the factory upgrades.
@@cops312this is how the new variants are coming for military and law enforcement. They’ve been on the open market for almost 5 years everywhere but here in the states.
This is how it comes from factory
Ur AUDIO Is TOO LOW :((
Msrp ?
You can expect to spend around $2,300-$2,400 (tax included) brand new. But I'm basing that off of gunbroker prices and how much I bought it for. You might be able to get it cheaper.
What is the sling. Looks pretty
Thought the same so I researched it, looks like it's from Wellsmadecompany but I don't see it listed on their site anymore.
Hello, could you give me a list for your build? I like them and I am getting same one
Benelli M4 11732, Holosun 510C (Green Reticle), Streamlight Protac HL-X Laser ( I think. Forgot the exact name lol), BCM KAG grip. You asked about the sling in your other comment. It's from Wellsmade Co. They're kind of meme/joke slings, but they're actually pretty good slings. They're thin though. So if you have a heavier gun you might one to buy a sling pad for it. Theirs or someone else's.
Fairly sure those models are modified post import. The pesky 922r law keeps Benelli from shipping M4s with collapsible stocks and 7 round tubes. That’s why you see the bulge in the tube, it’s from the addition of a tube extension. The forend is not a stock Benelli part from Italy, it’s going to be made in the US. More than likely the trigger, hammer, and disconnector is US made as well.
Negative. These are the LEO/MIL variants. Once they’re imported the dealer can sell to who they want. 922r only pertains to neutered versions being imported as such.
thx, cool video man, the hand guard is a huge win imo; items to wrap my thumb over when gripping and often get a toasty thumb after 15+ rounds. Gen2 is a littler heavier in the front but that is OK for me. Mag upgrade from factory is much nicer; and it’s VERY tough to find a Gen1 5-slot adjustment now days. larger buttons - sooo awesome! that Benelli “m-link” system i think they call it is quirky, but works
You commented the M$ 11732 has a fixed choke, Benelli states manual choke.
I'm sorry. I think I'm a bit ignorant here. What's a manual choke?
@@buttermilkswagreal Correction - The M4 11732 has a fixed modified choke. I received incorrect info from the dealer. In layman's terms a fixed choke is a slight modification at the end of the barrel that is fixed in place by the manufacturer - can't be removed. A shotgun with a manual choke has a threaded barrel and which allows you to interchange multiple "chokes" which are slight variations at the end of the barrel that change the shot spread.
Correction - I received my 11732 and it has a fixed choke, dealer provided incorrect info to me...
@@user-ej3cs4fg2h Oh ok manual means adjustable. Sorry about that. I've only heard it called adjustable. 😅
That Sucks !! Having Choke choices like previous versions is a nice thing !!@@user-ej3cs4fg2h
Great Video
i have the same one.. it is a beast of a gun!!! but i have problems removing the stock.. any tips?
I'm sorry. I haven't tried removing the stock.
The button needs to be pushed way in and the turn the stock. You might use a pen to push on it or I seen one old timer put a nut down on the button and push.
Got this exact model a few weeks ago. Absolutely love it. Only slight disappointment was I thought the handguard was MLOK as well. So easy to disassemble and clean this bad boy and an absolute joy to shoot. I like the oversized controls but prefer Freedom Fighters Tactical charging handle so ended up switching that out. At least I have a spare now lol. I think I also prefer the square bolt release from TT so I ordered that. Good to hear about Mesa Tactical working on a model to fit the LE.
Can you swap out the original Plastic M4 Handles in place of this New T Pro Rail system ?? TY
M-Loc attachments will work on this hand guard. You just have to take off the little locating nubs on the back of the attachment and use countersunk screws with loctite so the counter sunk head centers the attachment up on the rail and loctite keeps it secured In place after torquing down.
@@MrLew1965yes.
Any update on the mesa tactical shell holder? I am glad i watched this video. I was about to order that shell holder.
I haven't messaged them since then. The 6-shot carrier should be ready based on their timeline, but I wouldn't buy one until it's confirmed directly. If you decide to message them, remember to mention you have the new style handguard.
@@buttermilkswagreal Mesa Tactical told me all of there shell holders on their website will fit this handgaurd now. I am in contact with benelli for the handgaurd picatinny rails. They were not in the box with my m4. I can't find the picatinny mounts anywhere. I want to mount my light but can not until I get this resolved.
@@user-jn8sg5ds1h Oh, that's very unfortunate with the rails. They come in a little baggy and can be easily misplaced by the store/seller. If you haven't already, I'd try contacting the place you bought from. But that sucks. I wish you the best of luck with that.
Can anyone by the LE models? Or is it restricted to Law Enforcement?
I don't think there's any particular restriction to buying/owning. You can find them for sale all around the internet and in gun shops.
Correct. You can buy them once they’re imported here under mil/Leo use. Dealers sell them to civilians every day. There’s nothing illegal about it.