Пікірлер

• 
  @koottagi11 күн бұрын

  How much the machine weight???

• 
  @PETMachinery11 күн бұрын

  Hello, thank you for your interest. The clamp unit of this particular model has a weight of 28,000 kg, and the injection unit another 14,000 kg. The robot shipping weight is 3,000 kg. We trust this assists. Check www.petmachinery.com for currently available used PET equipment.

• 
  @harinnsonАй бұрын

  Buenas tardes, quién me puede asesorar con un problema que tengo en la pmv, muchas gracias de antemano.

• 
  @PETMachineryАй бұрын

  buenos días, le aconsejamos contactar con el fabricante Sacmi para resolver su problema. Un saludo.

• 
  @digregoriocbАй бұрын

  nice machinery

• 
  @abdulwali61624 ай бұрын

  Can anybody tell me how about the complete process with the sensors and working?

• 
  @PETMachinery4 ай бұрын

  Hello Abdul, your questions is not clear but if you require assistance to commission and start-up a Sidel machine I would suggest you use local Sidel representative to get a technician to assist you. We can also send someone from Europe but that will be more expensive.

• 
  @abdulwali61624 ай бұрын

  @@PETMachinery I want manual of sidel that how it works

• 
  @ArifKhan-du3qj4 ай бұрын

  I'm working this

• 
  @anilKumar-fi6bc7 ай бұрын

  Machine price

• 
  @PETMachinery7 ай бұрын

  Hello Anil, thank you for your interest. The above machine has been sold several years ago as the video was posted 7 years ago. We currently do not have any HyPET 300 systems available, but could offer a HyPET 225 package with one of the machine suited for 72 cavity production. If this could be of interest please email us at [email protected]

• 
  @Nurdin-uw4jh8 ай бұрын

  I have a question, I experienced a problem with the sidel sbo8 machine, during the blowing process there was 1 mold that made an abnormal sound, it made a loud sound like the sound of a burst tire... please help

• 
  @Nurdin-uw4jh8 ай бұрын

  I have a question, I experienced a problem with the sidel sbo8 machine, during the blowing process there was 1 mold that made an abnormal sound, it made a loud sound like the sound of a burst tire... please help

• 
  @Nurdin-uw4jh8 ай бұрын

  I have a question, I experienced a problem with the sidel sbo8 machine, during the blowing process there was 1 mold that made an abnormal sound, it made a loud sound like the sound of a burst tire... please help

• 
  @PETMachinery8 ай бұрын

  Probably has to do with the 40bar air inlet, filter or blow nozzle.

• 
  @Nurdin-uw4jh8 ай бұрын

  @@PETMachinery I have done a cleaning block blow and also checked the stretched seal but the results are still the same

• 
  @Nurdin-uw4jh8 ай бұрын

  Can you name any factors that could influence the occurrence of this problem?

• 
  @PETMachinery8 ай бұрын

  Check the air filter on that cavity. Apart from that I would suggest you get a Sidel technician in.

• 
  @Nurdin-uw4jh8 ай бұрын

  @@PETMachinery okay thanks for the information

• 
  @marvinmelchor64219 ай бұрын

  Opere una Sidel de 12 moldes y una Universal de 14 moldes y Una Sipa de 20 Moldes, Saludos y Bendiciones

• 
  @luisarte2023 Жыл бұрын

  A donde puedo hacer un curso para operar estas maquinas

• 
  @PETMachinery Жыл бұрын

  Buenos días Luis, gracias por tu mensaje. La mejor manera sería contactar con Sidel para pedir la asistencia de un técnico para que te enseñe la operación de este tipo de maquinas al igual que la resolución de problemas. Sin saber de dónde es no podemos darle más información más concreta.

• 
  @user-vv4fh7iu4i Жыл бұрын

  Si la máquina la intentas arrancar y se alarma y queda así,que podia ser que este fallando,ya no jala cuando la intento arrancar?😢

• 
  @PETMachinery Жыл бұрын

  Buenos días - es imposible saber el problema de esta forma. La máquina debería dar un código de error, quizás le es posible grabar un video para ver qué pasa? Se ha puesto en contacto con algún técnico de SIPA? Envíanos un correo a [email protected] Gracias de antemano.

• 
  @2-ff5wl Жыл бұрын

  نعمه طحان

• 
  @2-ff5wl Жыл бұрын

  رائد الطحان

• 
  @nileshpandya6421 Жыл бұрын

  HI FOR SACMI MACHINE OUTUT OF 2000 CAPS PER MINUTE CAN YOU HELP ME WITH WHICH STROBOSCOPE IS BEST TO BUY

• 
  @PETMachinery Жыл бұрын

  Hello Nilesh, thank you for your comment. I'm afraid we cannot help you with your request. I would suggest you check with Sacmi for the right specification of stroboscope required.

• 
  @anassanass2381 Жыл бұрын

  👍👍 bon souvenir

• 
  @neerajbaghel2439 Жыл бұрын

  Nice

• 
  @SergioHenrique-dt4yp Жыл бұрын

  Essa é top de linha. Umas das melhores máquinas que a sidel desenvolveu. Agora a onda é sidel Matrix.

• 
  @neerajbaghel2439 Жыл бұрын

  Nice

• 
  @neerajbaghel2439 Жыл бұрын

  Nice

• 
  @Nurdin-uw4jh Жыл бұрын

  how to fix the alarm Spindle preferntial heating fault#15?

• 
  @ShahAlam-cy1pz Жыл бұрын

  Hi

• 
  @mohturbo1900 Жыл бұрын

  Hi

• 
  @user-lz5jb1wb7u Жыл бұрын

  معياره الريبوت

• 
  @enzorojas3457 Жыл бұрын

  Cómo limpio válvula soplado?

• 
  @PETMachinery Жыл бұрын

  Buenos días Enzo, sentimos no poder ayudarle. Le aconsejemos contactar con el servicio técnico de KHS.

• 
  @anthonypinto735 Жыл бұрын

  what model is the blw moulding machine ?

• 
  @PETMachinery Жыл бұрын

  Hello Anthony, the video above is of a Sidel SBO 10/10 series 1 blow moulding machine. Should you have an interest then please email us at [email protected]. Thank you in advance.

• 
  @webbie021984 Жыл бұрын

  So clean 🤣

• 
  @TheKing-qr3qh2 жыл бұрын

  Hello can we communicate I am also working with pet matchine AOKI DPH PF

• 
  @PETMachinery2 жыл бұрын

  Hello, if your interest is in buying or selling a similar machine then please contact us by email at [email protected]

• 
  @faridfenniche89242 жыл бұрын

  Bonjour je suis technicien en maintenance industrielle électromécanique j'ai déjà travaillé sur machine Sidel sbo6-1serie sbo6 série 2 8ans 3ans chez Nestlé Waters Algérie

• 
  @PETMachinery2 жыл бұрын

  Bonjour Farid, merci pour votre message. Nous vous garderons à l’esprit si nous avons besoin des services que vous pouvez fournir dans un proche avenir.

• 
  @alhazzarfactory45992 жыл бұрын

  How much is the price

• 
  @PETMachinery2 жыл бұрын

  Hello sir, if you could be so kind to send us an email to [email protected] we can then send you our full quotation for this SMI machine. Thank you in advance.

• 
  @amitchourey54892 жыл бұрын

  Currently I am working on the husky GL 300 as a shift engineer

• 
  @adis46932 жыл бұрын

  New machine ASB inj nozle where

• 
  @PETMachinery2 жыл бұрын

  Hello Adis, thank you for your message. It is not clear what you require, a new ASB machine or a new injection nozzle for an existing ASB machine. Could you be so kind to send us an email to [email protected] and explain your exact requirement? Thank you in advance.

• 
  @lintonthomas98262 жыл бұрын

  Not a bottle falling

• 
  @minhpoi60602 жыл бұрын

  C.ty ở đâu vậy a.

• 
  @PETMachinery2 жыл бұрын

  Dear Minh, thank you for your message and interest. If you could be so kind to send us an email to [email protected] then we can offer you a similar Husky Index machine as the one above is no longer available (it was posted in 2011). Thank you in advance..

• 
  @JohnSmith-lw2bm2 жыл бұрын

  Your palletizer is painfully slow. An Alvey could go faster.

• 
  @osmanguler9192 жыл бұрын

  Üstad bunun bizde varda sıkıntılı çalışıyor Problem şu (ön üfleme basıncı yetersiz diyor hava kısmı calisyir ama gene makina duruyor)

• 
  @antoniofariasdossantos68742 жыл бұрын

  Vcs tem vídeo da sbo 8

• 
  @idrissagiroglu21052 жыл бұрын

  Great

• 
  @bouzidiabdelkrim95752 жыл бұрын

  hello I am looking for a PET Mold Tuning Sheet

• 
  @PETMachinery2 жыл бұрын

  Hello Abdelkrim, thank you for your message, however we cannot help you with your request. We would recommend contacting the mould manufacturer.

• 
  @dkaruna272 жыл бұрын

  Is it for sale?

• 
  @PETMachinery2 жыл бұрын

  Dear sir, indeed this machine is still available for sale. If you could be so kind to email us ([email protected]) or let us know your email address we can forward our offer to you immediately. Thank you in advance.

• 
  @tyheify2 жыл бұрын

  How much ?? Dola .how much cavety?

• 
  @PETMachinery2 жыл бұрын

  Hello sir, please note this video was published in 2016 and since then we have sold this machine. If you could advise us your email address when can send you alternative options available. You can also email us at [email protected] - thank you in advance.

• 
  @adis46932 жыл бұрын

  Good technologi

• 
  @aliglxnxn60872 жыл бұрын

  I need how to fix air supply

• 
  @PETMachinery2 жыл бұрын

  Dear sir, thank you for your comment. Unfortunately to resolve your issue with just one phrase of explanation is impossible. Kindly explain the issue fully by email ([email protected]) so that our technician can give you suggestions to resolve. The more information you can give the better (machine model, compressor model and output capacity etc etc). Thank you in advance.

• 
  @Hola450563 жыл бұрын

  Hola necesito ayuda tengo problema con un cilindro

• 
  @Hola450563 жыл бұрын

  Por favor

• 
  @PETMachinery3 жыл бұрын

  @@Hola45056 Hola Javi, en estos momentos no tenemos técnico para ayudarte con la Nissei. Nos podrías decir dónde está geográficamente para poder ofrecerte una solución en forma de servicio técnico? Puedes enviarnos tu respuesta por correo a [email protected]

• 
  @globaltechtm27143 жыл бұрын

  hi fellow youtuber. nice video

• 
  @viji86413 жыл бұрын

  I'm multi skill technician

• 
  @claudiogoncalves35953 жыл бұрын

  Show!!!!

• 
  @animalstv15283 жыл бұрын

  I need mor information for this machine

• 
  @PETMachinery3 жыл бұрын

  Hello, thank you for your comment. If you could send us an email to [email protected] and let us know what further info you require we can then send you accordingly. Thanks in advance.

• 
  @jamesvincent33763 жыл бұрын

  I used to run that type of machine with an SbO 14 at the same time they were great

• 
  @user-es5zq1gi8s3 жыл бұрын

  do you have more videos about fuji seal sleeve machine ?

• 
  @PETMachinery3 жыл бұрын

  Dear sir, thank you for your comment. Of this particular sleever we do not have any other videos.

• 
  @user-es5zq1gi8s3 жыл бұрын

  @@PETMachinery Thank your for your feedback.

• 
  @user-es5zq1gi8s3 жыл бұрын

  @@PETMachinery Thank you for your reply.