Пікірлер

• 
  @johntupaz621514 минут бұрын

  May I please get the part number for front and rear rotors for a 22 Amg gt 43 please

• 
  @joserasak14 минут бұрын

  nice job, did vibrations start after 500~800 kms ? on mine 2018 S Class i aldeary chage 2 sets ( on MB Dealer ) due to disc vibrations.

• 
  @pavman4216 сағат бұрын

  Hey thanks for the video. When I went to add a new Drive, the back cover wasn't coming off and I didn't know if I could just pop it or what this really helped.

• 
  @projectathos15 сағат бұрын

  Thanks for your support! Thanks and Good Luck! 🤞💪👍

• 
  @archstanton6642 күн бұрын

  I love the buttons on the GWG1000. I don't care for the two newer models' button designs. I have the BO GWG1000 but I do have some gripes. Only the hands glow in the dark which is useless without the light. Setting up the alarm is dumb. With four buttons, you shouldn't be limited to the dial. The timer only can be set for one hour. All that could be ignored if not for the weight. I bought it to retire my GW-A1100 but I end up wearing that more since it's lighter.

• 
  @projectathos2 күн бұрын

  💯🤞💪👍

• 
  @hansintakt52283 күн бұрын

  hey, how is the fan noise? some complain about it, some say it's silent. they're very loud in the current p1 models.

• 
  @projectathos2 күн бұрын

  These are not noisy as the previous P series because they started using a new and very improved cooling system. I mean if you are under load they will get noisy in order to cool down the processors but otherwise they run very quiet in normal conditions. I mean keep in mind this is a workstation not just some regular laptop... I do like their improvements now and will recommend this computer definitely 😁! Thanks and Good Luck! 🤞💪👍

• 
  @atmphil13 күн бұрын

  I’m working on one of them right now that also need an evaporator 2020 mercedes gle 350. Pepboys told me they going to pay me 9 hours to replace it I told them to tell the customer to take it to the dealership. 9 hours for all that work is not worth doing.

• 
  @projectathos3 күн бұрын

  Absolutely not for 9 hours! This is easily a 15 to 20 hour job! Thanks and Good Luck! 🤞💪👍

• 
  @chrispics24105 күн бұрын

  So when you changed the high pressure fuel pump it solved everything?

• 
  @projectathos5 күн бұрын

  In my case yes. But I cannot guarantee that this will be your case. You have to properly diagnose and then start changing parts. Thanks and Good Luck! 🤞💪👍

• 
  @chrisduru57477 күн бұрын

  please do you replace the brake pad sensor anytime you change your brake pads ?

• 
  @projectathos6 күн бұрын

  Yes absolutely! You have no choice especially if the sensor touched the disc/rotors and activated the brake light. Thanks and Good Luck! 🤞💪👍

• 
  @Unpog7 күн бұрын

  Thank you so much

• 
  @projectathos7 күн бұрын

  💯🤞💪👍

• 
  @rivermobster7 күн бұрын

  Awesome video. Thank you. 🙏

• 
  @projectathos7 күн бұрын

  💯🤞💪👍

• 
  @meseahunt8 күн бұрын

  did u do a rear video?

• 
  @projectathos8 күн бұрын

  Yes it's here - kzread.info/dash/bejne/gK6n2a2dqa_bqto.htmlsi=BRK0Zl1RToA_AcC8

• 
  @johnshopping3339 күн бұрын

  Great Video, it is not easy to get the plate back in. Rather frustrating design I suspect to keep you from doing yourself!

• 
  @projectathos9 күн бұрын

  Yes a little bit difficult... But that's is somewhat normal anyway... Thanks and Good Luck! 🤞💪👍

• 
  @schmick6310 күн бұрын

  I have a GLE63 and the A/C has a whistle noise when the front passenger dash air vent is selected, fan on speed 2 or above. It doesn't change when the windscreen ducting or feet ducting is selected, or the drivers side Dash air vent. Completely goes away when deselecting the passenger dash vent. Would you have any idea what would cause that ?

• 
  @projectathos9 күн бұрын

  Where do you live? This has to be properly diagnosed by someone who understands these cars. Someone would need to look inside the AC box and maybe try to check the blower motor and that vent for debris like leaves or something. Otherwise it may be something else within that AC box... Thanks and let me know... 🤞💪👍

• 
  @RazaNasar-m8o10 күн бұрын

  I even did an oil change my self after watching the video

• 
  @projectathos9 күн бұрын

  💯 🤞💪👍

• 
  @RazaNasar-m8o10 күн бұрын

  great demo. Love it. Saves me lot of money avoiding to go to dealer for service A

• 
  @projectathos9 күн бұрын

  💯🤞💪👍

• 
  @sr-xrp481711 күн бұрын

  What's the torque specification?

• 
  @projectathos14 сағат бұрын

  Read the Description of the video they are all there... Thanks...

• 
  @sr-xrp481711 күн бұрын

  Excellent video thanks!!

• 
  @projectathos9 күн бұрын

  💯🤞💪👍

• 
  @ryan_curry2311 күн бұрын

  What were the torque specs on the bolts? Not in description. Also great video going to do my gt63s

• 
  @projectathos14 сағат бұрын

  Just included them in the description of the video. Thanks! 🤞💪👍

• 
  @keiranritter489012 күн бұрын

  Is it not a risk to have these? If the police officer who’s trying to scan you sees it isn’t working. Won’t he just pursue you anyways

• 
  @projectathos12 күн бұрын

  First of all you need to know the traffic laws in your own state. So here these gadgets are legal and anyone can drive with them! Second of all the cop is trying to read my speed with his laser gun and if he doesn't get a reading that's doesn't constitute a legal reason for him to start chasing me and to pull me over! Remember you need to have done something illegal or need to be under a suspicion of doing something illegal which in this case I am not. Hence I have never had a cop try to go after me for this because it would be a very funny situation! What is he going to ask me anyway?! Do you know how stupid he is going to sound if he actually tells me that he cannot read my speed?! What am I supposed to answer him in this case?! That's not my problem, that is his problem... Have I done anything illegal - No I haven't... Like I said I have been driving for many years and I have not had a single cop try to go after me for not reading my speed... But again you need to check your local laws and you need to be informed of what and how you can drive with these laser jammers. I will always protect myself from these asshole vultures because the only thing they want to do is suck my bank account dry! Not to mention these days getting a speeding ticket will destroy your driving record The DMV will take points then the fine would be so expensive You are going to cry for a month and then most importantly your insurance is going to skyrocket! So you tell me whether you would not protect yourself at all cost from those vultures... Check the Vortex channel or his website for more information about this unless you would want me to explain this more to you... Thanks and Good Luck! 🤞💪👍

• 
  @keiranritter489012 күн бұрын

  @@projectathos that’s really interesting!! And a funny scenario hahaha. Here in Saskatchewan aswell as the other western provinces. There aren’t any actual regulations against citizens using such equipment. It’s never actually directly referenced at all in any legal document. I should be fine then hopefully!

• 
  @JeraldG12 күн бұрын

  Howdy, what oil should I use? I have a PDK Transmission on my 2011 Panamera S. I heard about Pentosin FFL-3 but it's super expensive and I can't find it at where I live. Any suggestions or alternatives?

• 
  @projectathos12 күн бұрын

  You can check online like FCPEuro and ECSTuning for what available for purchase we buy our fluids from a local warehouse that only sells to businesses... Thanks and Good Luck! 🤞💪👍

• 
  @JeraldG11 күн бұрын

  @@projectathos Hmm. have you heard of Febi Bernstein Gear Oil or something like that? I'm thinking of getting that. Any experience?

• 
  @CL500MBZ13 күн бұрын

  You really cant use a 17mm socket . Get rhe flower socket becaue it will destroy it like that other bolt

• 
  @projectathos12 күн бұрын

  You need to understand that we didn't do the damage to these lug bolts! This is how the car came to me! So technically the 17mm actually will not damage them if you know what you are doing! The problem is that someone used something else at the actual Mercedes Dealership here in Buckhead in Atlanta Midtown area and that is where the damage occurred! Thanks 🤞💪👍

• 
  @samirmahfuz13 күн бұрын

  Thank you

• 
  @projectathos13 күн бұрын

  💯 🤞💪👍

• 
  @adamtaylor652213 күн бұрын

  Before opening it up do you need to disconnect the battery, if so how?

• 
  @projectathos13 күн бұрын

  No need to disconnect it no worries! Thanks for your support! 🤞💪👍

• 
  @lucybusch287314 күн бұрын

  Fantastic work and video amazing one hand skills lol but please start the car at the end so we can see it start

• 
  @projectathos14 күн бұрын

  This repair was done some years back my friend and the car is long gone. Technically I didn't know whether this repair would work but since I know that there are companies that charge upwards of $400 for this repair! The repair did end up working but I didn't pay attention to record the results. I do have another video later with this same repair on another Mercedes and I taped that the car started at the end... Thanks for your support! 🤞💪👍

• 
  @notalone257514 күн бұрын

  Your videos are the best. Seriously, not blowing smoke. You should make more.

• 
  @projectathos14 күн бұрын

  I am making more my friend! Have not stopped! Thanks for your support! 🤞💪👍

• 
  @sprymaster1215 күн бұрын

  Question - After setting workshop brake pad replacement mode does the car ignition have to stay on while the rear pads are replaced?

• 
  @projectathos15 күн бұрын

  I have left it ON many times but the vehicle goes to sleep no matter what. No worries there as when you get back in the car, you would need to turn it On again and the car will remember that The Service Mode is On. I hope this answers your question. Just watch my videos while doing the complete Brake Service with this function on and you will understand it completely... Thanks and Good Luck! 🤞💪👍

• 
  @Lancemaiwandshakir16 күн бұрын

  I have the code p029921, ive changed the Solenoid and the actuator but the problem is still there im about to order the egr valve vacuum hope that solves the problem. Please let me know of anything else i should look into.

• 
  @projectathos11 күн бұрын

  You would need to smoke your intake pipes from the turbo to the air intake for possible leaks. If not that then you may have an issue with your wastegate and lastly it would be your turbo... Thanks and Good Luck! 🤞💪👍

• 
  @peterhrd831017 күн бұрын

  BMW recommends using ONLY their original oil for the differential when you make an oil change!

• 
  @projectathos17 күн бұрын

  Yeah so that dumb people like yourself will keep filling their bank accounts with money while they sell you repackaged oil made by Febi or another German oil company! Not to mention that BMW actually DOES NOT recommend changing their fluids so you can destroy your car within 80k miles and you end with no choice but to buy a new vehicle! And of course exactly at that moment your BMW Salesman will offer you the newest model so that you can keep filling their accounts again running like a hamster in the roller wheel with no finish line ahead! Just to let you know I have been doing thia job for over 25 years now and I have no return jobs nor a car that blew because of the fluids I use! Redline also FYI is a very reputable company that makes racing products which are made to handle stress and heat probably a thousand times better than the OE BMW junk sold in their bottles with no description what exactly they are selling you in the first place! Thanks and Good Luck! 🤞💪👍

• 
  @MarcusLeonard30717 күн бұрын

  After doing this ATF change myself on my 2019 C43, I found it virtually impossible to remove those back pan screws without moving the transmission mount/bracket out of the way. I had to use two jacks to do this because the transmission lowers and there's no place to hold up the jack. I succeeded by shifting the mount downward enough on the back part of the mount to access the pan screws. Once I was done removing all the pan bolts, installing the new pan and screws, a second jack was necessary to push the mount back up without damaging anything. Such a pain. Otherwise, this job is easy.

• 
  @projectathos17 күн бұрын

  💯🤞💪👍

• 
  @mikimiki19517 күн бұрын

  Great video 👍🏻 Erling makes good products I used Erling valve stem seals on my bmw when I did the replacement 👍🏻

• 
  @projectathos17 күн бұрын

  💯🤞💪👍

• 
  @Audiowithalex18 күн бұрын

  Great video, thanks for this, do you have a guide for changing a wheel bearing on this vehicle?

• 
  @projectathos18 күн бұрын

  I haven't had one of these GLEs come in with a bad bearing so unfortunately I don't have this video I'm sorry. Thanks and Good Luck! 🤞💪👍

• 
  @amines976719 күн бұрын

  I have a 2010 c350 and I scanned it and it gave me 5 codes u0101 p0607 p0455 p0306 and p0300 do you think it could be the connectors possibly

• 
  @projectathos18 күн бұрын

  Normally you have to investigate the codes individually or sometimes altogether if you are an experienced mechanic and you would know what these codes with me when they show up together. These connectors will give you problems only if they are rusted so you need to get to them and check them thoroughly and see if you see any rust or any other problems. If they're clean then most likely this is not your problem. Thanks and Good Luck! 🤞💪👍

• 
  @user-qf1ix3bf9b19 күн бұрын

  does this only resets the oil light, or is there a another button to reset everything else, like brake fluid, trans flush, coolant etc

• 
  @projectathos19 күн бұрын

  This is mainly for the Oil Service. The other services you mentioned are not really recorded in the system so that they can be reset with Mercedes. BMW for example has the Brake and Inspection reminders has in the cluster and they can reset in detail but Mercedes doesn't have them. Actually I don't know of any car that has the Brake fluid, Transmission service and coolant where they can be recorded or reset. Also on the Transmission you are not supposed to be doing Flushes or you will destroy your transmission. Thanks! 🤞💪👍

• 
  @theKiddAlways20 күн бұрын

  everyone has a video but they don't have detailed video like yours. thank you so much cause it was anmoying to look at the light. you are a life savor and earned a subscriber. 👍🏼

• 
  @projectathos20 күн бұрын

  💯 Thanks for your support! 🤞💪👍

• 
  @dbasix-ocho-zero-cinco20 күн бұрын

  thanks for the video-made a lot sense with explanation

• 
  @projectathos20 күн бұрын

  💯🤞💪👍

• 
  @bartdabek639122 күн бұрын

  And thanks for this video.👍

• 
  @projectathos22 күн бұрын

  💯🤞💪👍

• 
  @bartdabek639122 күн бұрын

  I gave 60k on my 2016 Panamera GTS . Should I change fluid and filter or just fluid?

• 
  @projectathos22 күн бұрын

  Fluid and Filter 20000 miles ago my friend! You skip on these and you risk destroying your transmission! Thanks and Good Luck!🤞💪👍

• 
  @aaronleckow22 күн бұрын

  U saved me 800 dollars lol😂

• 
  @projectathos22 күн бұрын

  Yes Sir! Thanks for your support! 🤞💪👍

• 
  @eqqq5422 күн бұрын

  I went to Infiniti dealer and they don’t recommend changing the filter.

• 
  @projectathos22 күн бұрын

  They also don't recommend changing the fluid too! Guess what You are going to be paying for a new transmission at 60000 miles! There's a reason why you cannot get a hold of a used Nissan transmission these days! People keep replacing their transmissions because they never change the fluids and the Stealerships never recommends those... Keep listening to the Stealership so you can fill their bank accounts with your money! Good Luck! 🤞👍

• 
  @Techreviewsnow24 күн бұрын

  My glk 350 2013 has the same problem it won't crank and has the "do not shift gear and vehicle not in park" error. there were previous repairs on the driver's side can buses area. I noticed there was water on the floor carpet and dried it all out. Now the car starts but the break lights are on and the back lights won't go off. There are orange and white socket in the same place with the can buses areas the orange socket seems to have some repairs. My question is it safe to by pass those sockets and correct the wires directly because I noticed there are some already bypassed wires there

• 
  @projectathos24 күн бұрын

  You shouldn't have any wires that have been bypassed! All wires must be connected properly to these connectors and all wires should be free of rust or anything similar! If you see repairs you must make sure that the wires were repaired properly and that they actually work! As far as stuff happening on the rear you can also check your Rear Sam for problems there because the electronics in the Rear Sam are responsible for those Rear lights. I hope I have helped you so far and if you need more help don't hesitate to contact me again. Thanks and Good Luck! 🤞💪👍

• 
  @113036stat24 күн бұрын

  Thanks for the follow up!

• 
  @projectathos24 күн бұрын

  💯🤞💪👍

• 
  @jmsnaz25 күн бұрын

  Recently bought my first MB/AMG. Do the rotors need to be replaced every time the brake pads are replaced? I do most of my own maintenance on my vehicles and was surprised to learn that my rotors needed to be replace at 20K miles (according to dealer after schedule B maintenance). I don't see any physical issue with the rotors, so trying to wrap my head around reasoning. Thanks!

• 
  @projectathos24 күн бұрын

  If you live here in US give me a call at 404-992-0120 so I can explain this to you because this is a long conversation...

• 
  @playharder143525 күн бұрын

  that model is a total PITA

• 
  @ammreid25 күн бұрын

  Hey man... do you just do transmission fluid changes or repair them as well? 16' Jetta with 09G transmission...has leak (bad) not dripping, just pouring out.

• 
  @projectathos24 күн бұрын

  Where's the leak coming from?

• 
  @abo3mmar29225 күн бұрын

  Thank you for this pro work

• 
  @projectathos25 күн бұрын

  Thanks for your support! 🤞💪👍

• 
  @abo3mmar29224 күн бұрын

  @@projectathos my pleasure

• 
  @koldee25 күн бұрын

  those air vent trims can be pulled out without need to dismout the side panels?

• 
  @projectathos25 күн бұрын

  No you cannot pull them out on their own! You need to pull the whole panel. Thanks and Good Luck!🤞💪👍

• 
  @koldee25 күн бұрын

  @@projectathos thank you

• 
  @koldee25 күн бұрын

  Hello, do you have any video or tutorial on how to dismount the air vents like you did below?

• 
  @projectathos25 күн бұрын

  You have to pull the whole panel... Thanks! 🤞💪👍

• 
  @ftam660426 күн бұрын

  Your radar works undercover for the cops.

• 
  @projectathos26 күн бұрын

  I have to admit you are very funny🤣!

• 
  @garrettbuckmaster429726 күн бұрын

  You have a mudmaster you will donate to a tree climber that got hurt last year

• 
  @projectathos26 күн бұрын

  I will donate one as soon as Casio sends me one as a Gift to present on my channel! So hurry up and contact Casio so they can send me that watch! Thanks! 🙏👍

• 
  @DanElgaard926 күн бұрын

  Best PC I ever owned 🙂

• 
  @projectathos26 күн бұрын

  💯 🤞💪👍