Пікірлер

• 
  @Jeep-Wrangler-Fest3 күн бұрын

  🔥🔥🔥 WJ

• 
  @douglasbeary78905 күн бұрын

  Where did you go bro?

• 
  @ivangutierrez73415 күн бұрын

  🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦👍

• 
  @ChristianCotney6 күн бұрын

  Anyone else have a really good experience with the 4.7? I drove my moms around when I was 16 and despite my mom never servicing it, it ran great. It would also run neck and neck with early 2000's mustang gt's up to 100mph. When the radiator went out at 230k the engine was slowly starting to lose performance and smoke a little. But I know it would've lasted a lot longer with religious maintenance. Definitely looking to buy one in the future to go with my Camaro.

• 
  @TexasRoadRanger9 күн бұрын

  I have a whole nother respect for my 04 WJ... I had NO IDEA they were that good. Now I'm not sure I want to sell it..

• 
  @PrestonFarney9 күн бұрын

  How big of a lift do you have on it?

• 
  @intrigue1751759 күн бұрын

  Spotter really needs to get his stuff together...

• 
  @ast-og-losta12 күн бұрын

  Ive had mine since new. Never sell it.

• 
  @ast-og-losta12 күн бұрын

  What is the torque spec on the spacers?

• 
  @johnberdrow326320 күн бұрын

  I would like to see ZJ upgrades and accessories

• 
  @robertman625822 күн бұрын

  Totally accurate for the safe confines of North America. Heading to the more remote territories in Africa or here in Australia, Parts and support are much more limited making other more common brands a better bet.

• 
  @joaoluizguimaraesfranco28222 күн бұрын

  Devemos lembrar que ao fazer o Lifting a estabilidade do veículo fica prejudicada.

• 
  @ryanballenger300824 күн бұрын

  Build another wj. Love wj builds.

• 
  @hestonwilliams260425 күн бұрын

  *80 Series LandCruiser enters the chat*

• 
  @JustinLong-18727 күн бұрын

  There was over 14,000 made in 1998 just wanted to correct you on that I've had 3 ,2 slate & one pewter

• 
  @OtisAngeltech27 күн бұрын

  Are you running spacers?

• 
  @relaxgaming887229 күн бұрын

  These things are like mini monster trucks 😂

• 
  @harleymotorcycle6993Ай бұрын

  i have the ac2a as well as a ac180. I purchased the smaller unit out of convenience to run my BougeRV 30 quart 12 volt fridge. I use grid power to bring the fridge down to my needed temperature and then use the ac2a to maintain it, it lasts 12 hours. I have a 200 watt BougeRV Arch panel on my truck cap, so theoretically, it will run the fridge indefinitely as long as you have sun shine day times hours.

• 
  @MoToArchYАй бұрын

  Have the same jeep, same color!

• 
  @user-rl8yp6it7sАй бұрын

  какой размер шин и лифт?

• 
  @MyKlausmeineАй бұрын

  Qual a cor deste lindo WJ?onde comprar? maravilhoso vídeo!!!

• 
  @pierogillioАй бұрын

  You keep the Dana 30 and 35 or made a swap?? And how much lift?

• 
  @rubenmelendrez6680Ай бұрын

  Great jeep brother, got a ZJ 93. 5.2 litter that I'm in process if fixing up. Did you biuld your own front bumper ? Or did you buy it?

• 
  @robertrobinson5608Ай бұрын

  the only way comparison is fair or true is if both jeeps have the same tires

• 
  @seantreakle1174Ай бұрын

  Those are closed knuckle axles I couldn't see the transfer case that well but I believe that's the mp24 that's your weak link I've got a couple m24s and they gave me problems because once the rear bearing goes on the rear of the transfer case it has to be machine to be fixed so I swapped out to a MP 205 transfer case I got the same truck I got two of them I got a 1971 Ford f250 with a 460 out of a1968 Lincoln Continental and 409 axle gears I also have a 1968 highboy with the 360 with married transfer case I love both the trucks do you have the original 4-speed transmission? In what year diesel engine is that

• 
  @John-lk1pmАй бұрын

  Rule of thumb... Never approach a obstacle on the ground head on from an angle better bet

• 
  @pierogillioАй бұрын

  What’s your lift amount?

• 
  @jakecornett5083Ай бұрын

  Thanks bro! Your video helped me a ton and gave the confidence to do this on my own. Man, putting those knuckles back into the front struts WAS A JOB!

• 
  @jumzjumzjumzАй бұрын

  Great video, hope you see some more front end IFS rear axle in your comings and goings to prove to you they are not left behind VS front and rear solid axle

• 
  @locdogmilfhunter2 ай бұрын

  Did you re gear for the 35s or still using the 3.73?

• 
  @brandonfujikawa1332 ай бұрын

  She's a beaut 😍 🤙🏼

• 
  @randelcaudle74352 ай бұрын

  How much lift and what brand of lift?

• 
  @matthew79722 ай бұрын

  The way you hold that grinder is pretty fuckin scary

• 
  @pokebass12 ай бұрын

  I came here for the Ford. Quit talking about Jeeps.

• 
  @kcbobbin77392 ай бұрын

  Bro what’s your mpg????

• 
  @peterbawden38642 ай бұрын

  camera man is the best spotter there is for lines. Give up the camera and get the radio.

• 
  @PrimaryIgnition2 ай бұрын

  Sweeeet machine

• 
  @sekatyoukko692 ай бұрын

  Annoying music 🤮

• 
  @user-vb1wk5oi1z2 ай бұрын

  Real OFF-ROAD 💪💪💪

• 
  @bobbish7823 ай бұрын

  This is what I've noticed in my 61 years here on Earth. Years ago, you could buy a Jeep off the Kaiser / AMC showroom floor and take it 4-wheeling without doing any mods. Once Chrysler got a hold of Jeep, they started making them cheaper, but you could still do some rough driving with them (with slight mods, of course). When Daimler-Chrysler made them, flimsy and cheap was the way they went. You were lucky if you didn't break something in the suspension driving over a pothole in your favorite mall's parking lot. If you wanted to do anything remotely resembling 4-wheeling, you had to pretty much custom the entire vehicle. Today, under FCA, all Jeeps are complete garbage and no amount of work will make them any better. Jeep should have died in the early 90's, but somehow it held on. Now, it's 2024. Pull the plug FCA. Let Jeep finally die before it becomes an even bigger embarrassment than it already is.

• 
  @jenderarevalo3 ай бұрын

  What year is that jeep?

• 
  @KevinJohnson-iw6hq3 ай бұрын

  Looking how hard it was to lower the control arm for 2", I would think there is no room to push the ball joint on for 4".The lower ball joint would be vertical angle, am I wrong?

• 
  @jaimemontano69233 ай бұрын

  Mine has 185,000 miles on it but gas in California is killing me lol

• 
  @p.s.t_motorsports3 ай бұрын

  Miss your content when's your next video coming out?

• 
  @militant.anarchist24144 ай бұрын

  i just got a grand cherokee zj limited, its got 3 inch lift and 31inch mud tires and i couldnt be more excited to go wheeling in it

• 
  @CaptainMirro4 ай бұрын

  I just picked up a zj and have been enjoying taking in along the rivers near my house.

• 
  @zoranpavlovic33194 ай бұрын

  Jeep always

• 
  @89sascha744 ай бұрын

  Отличный аппарат ❤

• 
  @mikethrapp4 ай бұрын

  Mine goes to the track instead 😁 Or just sits collecting leafs lol

• 
  @and_rew97685 ай бұрын

  Well done 💪👋👍